New 3π‐2Spiro Ladder‐Type Phenylene Materials: Synthesis,Physicochemical Properties and Applications in OLEDs

New routes to ladder‐type phenylene materials 1 and 2 are described. The oligomers 1 and 2 , which possess a “3π‐2spiro” architecture, have been synthesized by using extended diketone derivatives 3 and 10 as key intermediates. The physicochemical properties of the new blue‐light emitter 2 were studied in detail and compared with those of the less‐extended 1 . Owing to the recent development of fluorenone derivatives and their corresponding more conjugated analogues as potential electron‐transport materials in organic light‐emitting diodes (OLEDs) and as n‐type materials for photovoltaic applications, we also report herein the thermal, optical and electrochemical behavior of the key intermediates, diketones 3 and 10 . Finally, the application of dispiro 2 as a new light‐emitting material in OLEDs is reported.     

Benzooxadiazaole‐based D–A–D co‐oligomers: Synthesis and electropolymerization

Four D–A–D type co‐oligomers have been synthesized by Stille condensation between monostannyl derivatives of furan/thiophene/selenophene/3,4‐ethylenedioxythiophene (EDOT) and 4,7‐dibromo‐benzo[1,2,5]oxadiazole. All these co‐oligomers were successfully electrochemically polymerized in dichloromethane and characterized by spectroelectrochemistry. All four polymers possess narrow optical band gap. Spectroelectrochemical studies of polymer films on indium tin oxide revealed that the replacement of donor EDOT with furan/thiophene/selenophene has affected the low‐energy charge‐carrier (bipolaron) formation significantly. Kinetic studies based on chronoamperometry show that the polymer P5 (EDOT‐capped benzo[1,2,5]oxadiazole system) possess better electrochromic property with high transmittance (66%) in visible region than the other copolymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Oligosilane‐ and Oligosiloxane‐bridged Phosphines – Synthesis,Structures, and Metalation

The range of molecular silicon phosphorus compounds has been extended by some new species containing oligosilane ((R₂Si)_n; n ≥ 2) or oligosiloxane ((R₂SiO)_mSiR₂; m ≥ 1) fragments bound to phosphorus atoms. Primary and secondary compounds of these types allow for the synthesis of metal derivatives. Such metalated species usually form oligomers and exhibit a versatile structural chemistry with cyclic, polycyclic, and cage‐like patterns. The main results obtained in the field of oligosilane‐ and oligosiloxane‐bridged phosphines will be presented below and the structures of the metal derivatives will be discussed. Moreover, the synthesis of an inorganic ligand on the basis of siloxane‐bridged phosphines will be presented. This compound opens up a new chapter in host‐guest chemistry.     

The NSN link as electron accepting moiety for stable,solution‐processable conjugated oligomers

New conjugated oligomers, oligo(9,9‐didodecylfluorene‐bis‐sulphurdiimide), consisting of 9,9‐didodecylfluorene separated by ? N?S?N? moieties, are reported. These oligomers are stable purple solids under ambient conditions with absorption covering a broad spectral window in the UV‐vis range and a main broad peak centered at 555 nm with onset extending to 700 nm. These oligomers show an obviously longer conjugation length than its dimeric analogue, bis‐9,9‐didodecyl‐fluorene‐2‐sulfurdiimide that shows a band‐edge absorption centered at 484 nm with onset at 590 nm. The dimer and oligomers are soluble in a variety of organic solvents. Moreover, we found that the oligomer with an average repeating‐unit number of six could significantly quench the photoluminescence (PL) of poly[2‐methoxy‐5‐(2′‐ethyl‐hexyloxy)‐1,4‐phenylene vinylene] (MEH‐PPV) or poly(3‐hexylthiophene) (P3HT) in the solid state. More importantly, the composites of this oligomer with P3HT showed a nearly 10‐fold enhancement of the photocurrent, compared with that of P3HT itself. In addition, the PL of this oligomer could be quenched by the presence of phenyl‐C₆₁‐butyric acid methyl ester (PCBM) in toluene. These results suggest the presence of photoinduced charge transfer in composites of these oligomers blended with an electronic partner that either donates or accepts electrons. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of methacrylate derivatives oligomers by dithiobenzoate‐RAFT‐mediated polymerization

Reversible addition fragmentation chain transfer (RAFT) was used to synthesize methacrylic acid oligomers and oligo(methacrylic acid)‐b‐poly(methyl methacrylate) (PMAA‐b‐PMMA) with targeted degree of polymerization ≈ 10. Characterization is by size‐exclusion chromatography (SEC) and electrospray mass‐spectrometry. SEC data are presented as hydrodynamic volume distributions (HVDs), the only proper means to present comparative and meaningful SEC data when there is no unique relationship between size and molecular weight. The RAFT agent, (4‐cyanopentanoic acid)‐4‐dithiobenzoate (CPADB), produced dithiobenzoic acid as a side product during the polymerization of methacrylate derivatives. Precipitation in diethyl ether proved to be an easy way to remove this impurity from the PMAA‐RAFT oligomers. Both unpurified and purified macro‐RAFT agent were used to prepare amphiphilic PMAA‐b‐PMMA copolymers. Diblock copolymer prepared from the purified PMAA homopolymer had a narrower HVD in comparison to those obtained from the equivalent unpurified macro‐RAFT agent. This work shows that while cyanoisopropyl‐dithiobenzoate or CPADB are good RAFT agents for methacrylate derivatives, they exhibit some instability under typical polymerization conditions, and thus when oligomers are targeted, optimal control requires checking for the degradation product and appropriate purification steps when necessary (the same effect is present for larger polymers but is unimportant). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2277–2289, 2008     

Self‐Assembled Fluorescent Organic Nanoparticles for Live‐Cell Imaging

Fluorescent, cell‐permeable, organic nanoparticles based on self‐assembled π‐conjugated oligomers with high absorption cross‐sections and high quantum yields have been developed. The nanoparticles are generated with a tuneable density of amino groups for charge‐mediated cellular uptake by a straightforward self‐assembly protocol, which allows for control over size and toxicity. The results show that a single amino group per ten oligomers is sufficient to achieve cellular uptake. The non‐toxic nanoparticles are suitable for both one‐ and two‐photon cellular imaging and flow cytometry, and undergo very efficient cellular uptake.     

Conjugated polymers for the fluorescent detection of nitroaromatics: Influence of side‐chain sterics and π‐system electronics

A series of eight poly(p‐phenylene vinylene) (PPV) and poly(p‐phenylene ethynylene) (PPE) ( P1–P8 ) derivatives were tested for their ability to detect the nitroaromatic explosive 2,4,6‐trinitrotoluene (TNT) and its model compound 2,6‐dinitrotoluene (DNT). The polymers P1–P8 represent five structural classes that have not been examined for nitroaromatic sensing. These new motifs include PPE derivatives with a main‐chain m‐terphenyl unit ( P1 ) or oxacyclophane canopy‐like structure ( P2 ) and PPV derivatives with 2,6‐mesitylenephenylene repeats ( P3 and P4 ), 9,9‐dialkyl‐1,4‐fluorenylene repeats ( P5 and P6 ), or m‐phenylene units that periodically disrupt π‐conjugation along the backbone of the polymer ( P7 and P8 ). The time‐dependent photoluminescent response of films to TNT and DNT and the solution‐phase Stern‐Volmer quenching constants for both TNT and DNT were determined. The results are rationalized in terms of side‐chain sterics and π‐system electronics and are discussed relative to known conjugated polymers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1487–1492     

Nucleotides,Part LXIX,Synthesis of Phosphoramidite Building Blocks of Isoxanthopterin N8‐(2′‐Deoxy‐β‐D‐ribonucleosides): New Fluorescence Markers for Oligonucleotide Synthesis

The chemical synthesis of isoxanthopterin and 6‐phenylisoxanthopterin N⁸‐(2′‐deoxy‐β‐D ‐ribofuranosyl nucleosides) is described as well as their conversion into suitably protected 3′‐phosphoramidite building blocks to be used as marker molecules for DNA synthesis. Applying the npe/npeoc (=2‐(4‐nitrophenyl)ethyl/[2‐(4‐nitrophenyl)ethoxy]carbonyl) strategy, we used the new building blocks in the preparation of oligonucleotides by an automated solid‐support approach. The hybridization properties of a series of labelled oligomers were studied by UV‐melting techniques. It was found that the newly synthesized markers only slightly interfered with the abilities of the labelled oligomers to form stable duplexes with complementary oligonucleotides.     

Synthesis and Antioxidant Properties of New Substituted 8‐Methyl‐6‐phenyl‐5,6‐dihydro‐4H‐1,3,2‐benzodioxaphosphocine‐2‐oxide Derivatives

A new route for the synthesis of substituted 8‐methyl‐6‐phenyl‐5,6‐dihydro‐4H‐1,3,2‐benzodioxaphosphocine‐2‐oxide derivatives has been developed by using cinnamic acid and p‐cresol via condensation, reduction, and followed by phosphorylation steps. The title compounds were characterized by IR, ¹H, ¹³C, ³¹P, and mass spectral studies and elemental analysis. The title compounds have been investigated for their antioxidant activity with respect to their IC₅₀ values using 2,2‐diphenyl‐1‐picrylhydrazyl, NO radical scavenging activities, and reducing power assay. The results obtained from the aforementioned methods revealed that 2‐phenylamino derivatives have shown greater free radical scavenging activity when compared with those of the phenoxy derivatives and is attributed to the presence of secondary amino group, which is able to produce free radicals easily.     

Cationic Poly([R]‐3‐hydroxybutyrate) Copolymers as Antimicrobial Agents

Poly([R]‐3‐hydroxybutyrate) (PHB), a natural biodegradable polyester, has attracted much attention as a new biomaterial because of its sustainability and good biocompatibility. In this study, it is discovered that PHB can be conveniently functionalized to obtain a number of platform chain architectures that may provide a wide range of functional copolymers. In a transesterification reaction, linear (di‐hydroxylated) and star shaped (tri‐ and tetra‐hydroxylated) PHB oligomers are synthesized, followed by copolymerization with 2‐(dimethylamino)ethyl methacrylate and quaternization with benzyl bromide to afford antimicrobial properties. The antimicrobial activities of the quaternary salts against clinically relevant pathogens on the interactions with outer and cytoplasmic membranes, lethal mechanisms, multipassage resistance, and synergy effect with antibiotics are investigated. Cationic PHB copolymers show effectiveness as antimicrobial agents, with minimum inhibitory concentration values 0.24–0.65 µm (or µmol dm^?3) (or 32–128 µg mL^?1) against Gram‐positive and Gram‐negative bacteria. Modifying the copolymer architectures into star shapes results in enhanced effectiveness to disrupt the membrane integrity. Synergistic effects are attained for all the quaternized PHB derivatives when they are used together with tobramycin. Multipassage resistance does not occur in both the linear and star derivatives against Gram‐negative bacteria after 20 passages.     

Singlet excitation energies of thiophene derivatives of fluorene: TD‐DFT study

Fluorene‐thiophene (FT)‐based oligomers and polymers and their derivatives are good candidates for organic blue light‐emitting diodes. In this work, the intrinsic properties of the ground and excited states of FT monomer and its derivatives are studied. The ground‐state optimized structures and energies are obtained using molecular orbital theory and density functional theory (DFT). The ground‐state potential energy curves or surfaces of FT and its derivatives are also obtained. All derivatives are nonplanar in their electronic ground states. The character and energy of the first 20 singlet–singlet electronic transitions are investigated by applying the time‐dependent density functional theory (TD‐DFT) approximations to the correspondingly optimized ground‐state geometries. The lowest singlet state is studied with the configuration interaction (singles) approach (CIS). Excitation energies are red shifted when the FT unit or its derivatives are extended longitudinally. CIS results suggest geometry relaxation in the first singlet excited state. When available, a comparison is made with experimental results. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

A vinylene‐linked benzo[1,2‐b:4,5‐b']dithiophene‐2,1,3‐benzothiadiazole low‐bandgap polymer

A new heteroarylene‐vinylene donor–acceptor polymer P(BDT‐V‐BTD) with reduced bandgap has been synthesized and its photophysical, electronic and photovoltaic properties investigated both experimentally and theoretically. The structure of the polymer comprises an unprecedented combination of a strong donor (4,8‐dialkoxy‐benzo[1,2‐b:4,5‐b']dithiophene, BDT), a strong acceptor (2,1,3‐benzothiadiazole, BTD) and a vinylene spacer. The new polymer was obtained by a metal‐catalyzed cross‐coupling Stille reaction and fully characterized by NMR, UV–vis absorption, GPC, TGA, DSC and electrochemistry. Detailed ab initio computations with solvation effects have been performed for the monomer and model oligomers. The electrochemical investigation has ascertained the ambipolar character of the polymer and energetic values of HOMO, LUMO and bandgap matching materials‐design rules for optimized organic photovoltaic devices. The HOMO and LUMO energies are consistently lower than those of previous heteroarylene‐vinylene polymer while the introduction of the vinylene spacer afforded lower bandgaps compared to the analogous system P(BDT‐BTD) with no spacer between the aromatic rings. These superior properties should allow for enhanced photovoltages and photocurrents in photovoltaic devices in combination with PCBM. Preliminary photovoltaic investigation afforded relatively modest power conversion efficiencies of 0.74% (AM 1.5G, 100 mW/cm²), albeit higher than that of previous heteroarylene‐vinylene polymers and comparable to that of P(BDT‐BTD). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Laccase‐Catalyzed Synthesis of Low‐Molecular‐Weight Lignin‐Like Oligomers and their Application as UV‐Blocking Materials

The laccase‐catalyzed oxidative polymerization of monomeric and dimeric lignin model compounds was carried out with oxygen as the oxidant in aqueous medium. The oligomers were characterized by using gel permeation chromatography (GPC) and matrix‐assisted laser desorption ionization time‐of‐flight mass spectroscopy (MALDI‐TOF MS) analysis. Oxidative polymerization led to the formation of oligomeric species with a number‐average molecular weight (M_n) that ranged from 700 to 2300 Da with a low polydispersity index. Spectroscopic analysis provided insight into the possible modes of linkages present in the oligomers, and the oligomerization is likely to proceed through the formation of C?C linkages between phenolic aromatic rings. The oligomers were found to show good UV light absorption characteristics with high molar extinction coefficient (5000–38 000 m ^?1 cm^?1) in the UV spectral region. The oligomers were blended independently with polyvinyl chloride (PVC) by using solution blending to evaluate the compatibility and UV protection ability of the oligomers. The UV/Vis transmittance spectra of the oligomer‐embedded PVC films indicated that these lignin‐like oligomers possessed a notable ability to block UV light. In particular, oligomers obtained from vanillyl alcohol and the dimeric lignin model were found to show good photostability in accelerated UV weathering experiments. The UV‐blocking characteristics and photostability were finally compared with the commercial low‐molecular‐weight UV stabilizer 2,4‐dihydroxybenzophenone.     

Multicolour Self‐Assembled Fluorene Co‐Oligomers: From Molecules to the Solid State via White‐Light‐Emitting Organogels

Five fluorene‐based co‐oligomers have been prepared to study their self‐assembly in a wide range of concentrations, from dilute solutions to the solid state. Subtle changes to the chemical structures, introduced to tune the emission colours over the entire visible range, induce strong differences in aggregation behaviour. Only two of the fluorescent co‐oligomer derivatives self‐assemble to form soluble fibrils from which fluorescent organogels emerge at higher concentrations. In contrast, the other compounds form precipitates. Mixed fluorescent co‐oligomer systems exhibit partial energy transfer, which allows the creation of white‐light‐emitting gels. Finally, a mechanism for the hierarchical self‐assembly of this class of materials is proposed based on experimental results and molecular modelling calculations.     

3‐(3,5‐Dimethyl‐1H‐Pyrazol‐1‐yl)‐3‐Oxopropanenitrile as Precursor for Some New Mono‐Heterocyclic and Bis‐Heterocyclic Compounds

3‐(3,5‐Dimethyl‐1 H ‐pyrazol‐1‐yl)‐3‐oxopropanenitrile 1 was used as a cyanoacetylating agent for synthesis of the acetanilide derivative 3 . Compound 3 was utilized as a key intermediate for the synthesis of some new mono‐chromene and di‐chromene derivatives 9 and 13 , the dihydrazo derivatives 15 , and the dithiazole derivatives 18 via the condensation with o‐hydroxybenzaldehyde derivatives, the coupling with aryl diazonium salts, or the reaction with phenyl isothiocyanate in presence of KOH followed by phenacyl bromide derivatives respectively.     

Thio‐bromo “Click,” post‐polymerization strategy for functionalizing ring opening metathesis polymerization (ROMP)‐derived materials

The use of a thio‐bromo click strategy as an efficient postpolymerization tool is described. Norbornene derivatives bearing an α‐bromo ester could be polymerized using Grubbs 2^nd generation initiator to provide α‐bromo ester‐containing homo‐and block copolymers that could be efficiently functionalized through reactions with various thiols. A one‐pot strategy was also used, in which up to four different thiols were reacted simultaneously. This chemistry could also be used as an efficient cross‐linking strategy to form ROMP‐based gels as well as a tool for terminal functionalization of polypropylene‐based oligomers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 179–185     

pH‐Triggered Self‐Assembly of Cellulose Oligomers with Gelatin into a Double‐Network Hydrogel

Multicomponent systems for self‐assembled molecular gels provide huge opportunities to generate collective or new functions that are not inherent in individual single‐component gels. However, gelation tends to require careful and complicated procedures, because, among a myriad of kinetically trapped structures related to the degree of mixing of multiple components over a wide range of scales, from molecular level to macroscopic scale, a limited number of structures that exhibit the desired function need to be constructed. This study presents a simple method for the construction of double‐network (DN) hydrogels with improved stiffness composed of crystalline cellulose oligomers and gelatin. The pH‐triggered self‐assembly of cellulose oligomers leads to the formation of robust networks composed of crystalline nanofibers in the presence of dissolved gelatin, followed by cooling to allow for the formation of soft gelatin networks. The resultant DN hydrogels exhibit improved stiffness; the improvement in gel stiffness with double networking is comparable to that of previously reported DN hydrogels produced via a time‐consuming enzymatic reaction.     

Distribution of Amyloid‐Like and Oligomeric Species from Protein Aggregation Kinetics

Amyloid fibrils and soluble oligomers are two types of protein aggregates associated with neurodegeneration. Classic therapeutic strategies try to prevent the nucleation and spread of amyloid fibrils, whilst diffusible oligomers have emerged as promising drug targets affecting downstream pathogenic processes. We developed a generic protein aggregation model and validate it against measured compositions of fibrillar and non‐fibrillar assemblies of ataxin‐3, a protein implicated in Machado–Joseph disease. The derived analytic rate‐law equations can be used to 1) identify the presence of parallel aggregation pathways and 2) estimate the critical sizes of amyloid fibrils. The discretized population balance supporting our model is the first to quantitatively fit time‐resolved measurements of size and composition of both amyloid‐like and oligomeric species. The new theoretical framework can be used to screen a new class of drugs specifically targeting toxic oligomers.     

Reaction of Pyrimidinonethione Derivatives: Synthesis of N‐Methyl‐2‐Hydrizinopyrimidine‐4‐One,Thiazolo[3,4‐b] N‐Methylpyrimidinone; 2‐(1‐Pyrazolonyl) N‐Methylpyrimidine‐4‐one and 2‐Hydrazino‐N‐Methyl Pyrimidine‐4‐One Derivatives

6‐Aryl‐5‐cyano‐4‐pyrimidinone‐2‐thion derivatives 1a‐c reacted with methyl iodide (1:2) to give the corresponding 2‐S,N‐dimethyl pyrimidine‐4‐one derivatives 2a‐c . Compounds 2a‐c were in turn, reacted with hydrazine hydrate to give the sulfur free reaction products 3a‐c . These reaction products were taken as the starting materials for the synthesis of several new heterocyclic derivatives. Reaction of 3a‐c with acetic anhydride and formic acid gave pyrimido triazines 4a‐c and 7a‐c , respectively. Their reactions with active methylene containing reagents gave the corresponding 2‐(1‐pyrazonyl)‐N‐methyl pyrimidine derivatives 9a‐c and 10a‐c , respectively. Their reactions with aromatic aldehydes afforded the corresponding 2‐hydrazono pyrimidine derivatives 11a‐c . The structure of these reactions products were established based on both elemental analysis and spectral data studies.     

Quinoidal/Aromatic Transformations in π‐Conjugated Oligomers: Vibrational Raman studies on the Limits of Rupture for π‐Bonds

The vibrational Raman spectra of several series of aromatic and quinoidal compounds have been analyzed considering the downshifts and upshifts of the frequencies of the relevant Raman bands as a function of the number of repeating units. Oligothiophenes, oligophenylene‐vinylenes, and oligoperylenes (oligophenyls) derivatives are studied in a common context. These shifts are taken as spectroscopic fingerprints of the changes in π‐conjugation. For a given family, aromatic and quinoidal oligomers have been studied together, and according to their Raman frequency shifts located in the two‐well BLA–energy curve of their ground electronic state as a function of the bond‐length‐alternation pattern (BLA). The connection among BLA values, π‐conjugation, and Raman frequencies is taken here as the basis of the study. These Raman shifts/BLA changes have been related to important electronic properties of these one‐dimensional linear π‐electron delocalized systems such as quinoidal (polyene) and aromatic characters.