Chiral Hetero‐ and Carbocyclic Compounds from the Asymmetric Hydrogenation of Cyclic Alkenes

Several types of chiral hetero‐ and carbocyclic compounds have been synthesized by using the asymmetric hydrogenation of cyclic alkenes. N,P‐Ligated iridium catalysts reduced six‐membered cyclic alkenes with various substituents and heterofunctionality in good to excellent enantioselectivity, whereas the reduction of five‐membered cyclic alkenes was generally less selective, giving modest enantiomeric excesses. The stereoselectivity of the hydrogenation depended more strongly on the substrate structure for the five‐ rather than the six‐membered cyclic alkenes. The major enantiomer formed in the reduction of six‐membered alkenes could be predicted from a selectivity model and isomeric alkenes had complementary enantioselectivity, giving opposite optical isomers upon hydrogenation. The utility of the reaction was demonstrated by using it as a key step in the preparation of chiral 1,3‐cis‐cyclohexane carboxylates.     

由邻苯二胺合成苯并咪唑、喹喔啉以及1-H-2,3－二氢1,5-苯并氮杂卓

A series of benzo-fused heteroaromatic compounds with 5-, 6- and 7-membered tings, such as benzimidazole,quinoxaline and 1H-1,5-benzodiazepine derivatives, were synthesized through condensation reaction of o-pheny1-enediamine with ary1 aldehydes or ketones. The experimental conditions were carefully examined, and the products were characterized by ^1H NMR, ^13C NMR, MS, IR and elemental analyses. In addition, the structure of a benzodiazaepine derivative with 7-membered ring was confirmed by single crystal X-ray diffraction analysis.     

Synthesis of a Six‐Membered‐Ring (2R)‐10a‐Homobornane‐10a,2‐sultam and Structural Comparison with Oppolzer's,Lang's,and King's Sultams

The new six‐membered‐ring (2R)‐10a‐homobornane‐10a,2‐sultam (−)‐ 3a was synthesized and its X‐ray structural analysis was compared with that of the novel structure of the five‐membered‐ring (2R)‐bornane‐10,2‐sultam analogues (−)‐ 1a , b as well as with that already published for the six‐membered‐ring trans‐decalin‐like sultam 4a . Based on DN** density‐function calculations and X‐ray crystallographic studies of the N‐methylated analogues (−)‐ 1e and 4b and by comparing with the conformation of the N‐fluoro derivatives (−)‐ 1c and (+)‐ 1d , the anomeric stabilization was estimated to be smaller than the 2.0–2.5 kcal/mol earlier suggested. The direction of pyramidalization is rationalized in terms of H‐bond and steric and electronic interactions and extended to the known toluenesultam derivatives 10a – c .     

Novel Cyclic Enaminone Esters and N‐Heterocycles by Divergent Chemical Behavior through Amine‐Mediated Reactions

New acridinones and enaminone esters were synthesized by microwave‐assisted tandem‐Michael? Michael addition and cyclization from cyclohexane‐1,3‐diones. The reaction mechanism for both open and closed structures, and the presence of intramolecular twelve‐membered rings derived from NH and OH H‐bonds of enaminone esters are discussed.     

Synthesis of Cyclopenta‐HBCs and their Regioselective Chlorination During Oxidative Cyclodehydrogenation

Hexa‐peri‐hexabenzocoronenes with a bay‐fused five‐membered ring are synthesized from fluorenyl precursors. The key oxidative cyclodehydrogenation step is accompanied by regioselective chlorination that is enhanced by methylation at the cyclopenta‐ring or increased reaction concentration. The CpHBC products undergo mild electrophilic aromatic bromination, without catalyst, to afford adducts suitable for π‐extension by cross‐coupling.     

Mild incorporation of CO2 into epoxides: Application to nonisocyanate synthesis of poly(hydroxyurethane) containing triazole segment by polyaddition of novel bifunctional five‐membered cyclic carbonate and diamines

The cyclic amidinium iodide effectively catalyzed the ring‐expansion addition of epoxides with carbon dioxide under ordinary pressure and mild conditions to obtain the corresponding five‐membered cyclic carbonates in high yield. The novel triazole‐linked bifunctional five‐membered cyclic carbonate was synthesized successfully by the click reaction of the azide‐ and the alkyne‐substituted five‐membered cyclic carbonates under ambient temperature in high yield. The chemical structure of the novel bis(cyclic carbonate) was characterized by one‐ and two‐dimensional nuclear magnetic resonance spectra. The obtained bis(cyclic carbonate) was converted with commercially available diamines to poly(hydroxyurethane) containing triazole segment without catalyst in high yield. Analyses of the resulting poly(hydroxyurethane)s were performed by proton nuclear magnetic resonance, size exclusion chromatography, thermogravimetric analysis, and differential scanning calorimetry. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 986–993     

Catalytic Performance of Ruthenium‐Supported Ionic‐Liquid Catalysts in Sustainable Synthesis of Macrocyclic Lactones

Thirteen‐ to eighteen‐membered lactones were synthesized by ring‐closing olefin‐metathesis reactions of bis‐olefins with heterogeneous Grubbs‐supported ionic‐liquid catalysts (SILCs), in which homogeneous Grubbs catalysts were confined in pores of alumina with the aid of an ionic liquid. The Grubbs‐SILCs exhibited higher catalytic performance than their homogeneous counterparts and could be repeatedly recovered by simple filtration and re‐used several times.     

Synthesis and cationic ring‐opening polymerization of oxetane monomer containing five‐membered cyclic carbonate moiety via highly chemoselective addition of CO2

The bicyclic amidinium iodide effectively catalyzed the reaction of carbon dioxide and the epoxy‐containing oxetane under ordinary pressure and mild conditions with high chemoselectivity to give the corresponding oxetane monomer containing five‐membered cyclic carbonate quantitatively. The cationic ring‐opening polymerization of the obtained monomer by boron trifluoride diethyl ether proceeded to give linear polyoxetane bearing five‐membered cyclic carbonate pendant group in high yield. The molecular weight of the polyoxetane was higher than that of polyepoxide obtained by the cationic ring‐opening polymerization of epoxide monomer containing five‐membered cyclic carbonate. The cyclic carbonate functional crosslinked polyoxetanes were also synthesized by the cationic ring‐opening copolymerization of cyclic carbonate having oxetane and commercially available bisoxetane monomers. Analyses of the resulting polyoxetanes were performed by proton nuclear magnetic resonance, size exclusion chromatography, thermogravimetric analysis, and differential scanning calorimetry. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2606–2615     

12‐ to 22‐Membered Bridged β‐Lactams as Potential Penicillin‐Binding Protein Inhibitors

As potential inhibitors of penicillin‐binding proteins (PBPs), we focused our research on the synthesis of non‐traditional 1,3‐bridged β‐lactams embedded into macrocycles. We synthesized 12‐ to 22‐membered bicyclic β‐lactams by the ring‐closing metathesis (RCM) of bis‐ω‐alkenyl‐3(S)‐aminoazetidinone precursors. The reactivity of 1,3‐bridged β‐lactams was estimated by the determination of the energy barrier of a concerted nucleophilic attack and lactam ring‐opening process by using ab initio calculations. The results predicted that 16‐membered cycles should be more reactive. Biochemical evaluations against R39 DD‐peptidase and two resistant PBPs, namely, PBP2a and PBP5, revealed the inhibition effect of compound 4d , which featured a 16‐membered bridge and the N‐tert‐butyloxycarbonyl chain at the C3 position of the β‐lactam ring. Surprisingly, the corresponding bicycle, 12d , with the PhOCH₂CO side chain at C3 was inactive. Reaction models of the R39 active site gave a new insight into the geometric requirements of the conformation of potential ligands and their steric hindrance; this could help in the design of new compounds.     

Synthetic and Organocatalytic Studies of Quinidine Analogues with Ring‐Size Modifications in the Quinuclidine Moiety

Six highly enantiopure analogues of [2.2.2] were synthesized with five‐ or seven‐membered rings in the (original) quinuclidine skeleton. Five of these compounds were prepared through epoxide opening by a secondary cyclic amine, providing the nor‐ and homoquinuclidine moieties through five‐ and six‐membered ring formation. This method failed in the case of seven‐membered ring formation, so for that particular ring size a different synthetic route starting from 3‐quinuclidone was applied. The six novel analogues were examined as organocatalysts in four asymmetric conjugate addition reactions and the results compared with those of known cinchona alkaloid catalysts. This study shows that modification of the quinuclidine ring can have a substantial influence on catalyst activity and enantioselectivity. To acquire more insight into the characteristics of the new catalysts, the pK_aH values were determined by means of fluorescence spectroscopy. Furthermore, relative reaction rates of conjugate thiol additions reactions catalyzed by these quinidine analogues were measured through polarimetry.     

C,O‐Chelated BINOL/Gold(III) Complexes: Synthesis and Catalysis with Tunable Product Profiles

Unprecedented stable BINOL/gold(III) complexes, adopting a novel C,O‐chelation mode, were synthesized by a modular approach through combination of 1,1′‐binaphthalene‐2,2′‐diols (BINOLs) and cyclometalated gold(III) dichloride complexes [(C^N)AuCl₂]. X‐ray crystallographic analysis revealed that the bidentate BINOL ligands tautomerized and bonded to the Au^III atom through C,O‐chelation to form a five‐membered ring instead of the conventional O,O′‐chelation giving a seven‐membered ring. These gold(III) complexes catalyzed acetalization/cycloisomerization and carboalkoxylation of ortho ‐alkynylbenzaldehydes with trialkyl orthoformates.     

Liquid‐phase synthesis of mixture‐based bicyclic β‐lactam libraries

Five sets of 27‐membered combinatorial libraries of alicyclic β‐lactams were prepared via liquid‐phase Ugi 4‐center 3‐component reactions (U‐4C‐3CR) utilizing 3 different cis β‐amino acids, 3 different isonitriles and 5×3 sets of aldehydes. Through combinations of the building blocks of one of these libraries, all of the possible sublibraries were also generated. A few azetidinone derivatives were synthesized individually by parallel synthesis.     

Total Synthesis of Crotophorbolone

The complex ABC‐tricyclic structure of crotophorbolone, a derivative of the tigliane diterpenoids, was assembled by coupling of simple fragments. The six‐membered C‐ring fragment, having five contiguous stereocenters, was stereoselectively constructed from (R)‐carvone. After attachment of the five‐membered A‐ring through the π‐allyl Stille coupling reaction, the α‐alkoxy bridgehead radical reaction effected the endo‐cyclization of the seven‐membered B‐ring by forming the sterically congested bond at C9 and C10 stereospecifically and stereoselectively, respectively. Finally, the functional groups on the 5/7/6‐membered ring system were manipulated by rhodium‐catalyzed C2 olefin isomerization, C13 decarboxylative oxidation, and C4 hydroxylation, thus completing the first total synthesis of crotophorbolone.     

Mixed Boron(III) and Phosphorous(V) Complexes of meso‐Triaryl 25‐Oxasmaragdyrins

Two unprecedented mixed B^III/P^V complexes of meso‐triaryl 25‐oxasmaragdyrins were synthesized in appreciable yields under mild reaction conditions. These unusual 25‐oxasmaragdyrin complexes containing one or two seven‐membered heterocyclic rings comprised of five different atoms (B, C, N, O, and P) were prepared by reacting B(OH)(Ph)‐smaragdyrin and B(OH)₂‐smaragdyrin complexes, respectively, with POCl₃ in toluene at reflux temperature. The products were characterized by HRMS and 1D‐ and 2D‐NMR spectroscopy. X‐ray crystallography of one of the mixed B^III/P^V smaragdyrin complexes indicated that the macrocycle is significantly distorted and contains a stable seven‐membered heterocyclic ring within the macrocycle. The bands in the absorption and emission spectra were bathochromically shifted with reduced quantum yields and singlet‐state lifetimes relative to the free base, meso‐triaryl 25‐oxasmaragdyrin. The mixed B^III/P^V complexes were difficult to oxidize but easier to reduce than the free base. The DFT‐optimized structure of the 25‐oxasmaragdyrin complex with two seven‐membered heterocycles indicated that it was a bicyclic spiro compound with two half‐chair‐like conformers. This was in contrast to the chair‐like conformation of the complex with a single seven‐membered heterocyclic ring. Moreover, incorporation of a second phosphate group in the former case stabilized the bonding geometry and resulted in higher stability, which was reflected in the bathochromic shift of the absorption spectra, more‐positive oxidation potential, and less‐negative reduction potential.     

Enantioselective Total Synthesis of Dysidavarone A,a Novel Sesquiterpenoid Quinone from the Marine Sponge Dysidea avara

Dysidavarone A, a structurally unprecedented sesquiterpenoid quinone, was synthesized in 30 % overall yield in a longest liner sequence of 13 steps from commercially available o‐vanillin. A highly strained and bridged eight‐membered carbocyclic core was established by the C7?C21 carbon bond formation through a copper enolate mediated Michael addition to the internal quinone ring.     

Synthesis and characterization of cannabimimetic aminoalkylindole based 5‐(4‐alkyl‐1‐naphthoylamino)‐1,3,4‐thiadiazole‐2‐sulfonamides

A novel series of cannabimimetic aminoalkylindole‐based sulfonamide derivatives was synthesized. These new compounds were synthesized by reacting acyl chlorides of naphthoic acids with deacetylated acetazolamide in the presence of N‐ethyl‐morpholine to give structures incorporating 1‐naphthoyl groups of cannabimimetic aminoalkylindoles and a five‐membered heteroring typical of antiglaucoma sulfa drugs. The synthesized compounds were characterized using standard techniques. Photoluminescence of these derivatives was also studied, where more electron‐donating groups on the aromatic ring at the para‐position caused an increase in the intensity of the main peaks and shifts to higher emission wavelengths. © 2011 Wiley Periodicals, Inc. Heteroatom Chem 22:707–714, 2011; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20738     

Theoretical investigations of the reactivities of four-membered N-heterocyclic carbene analogues of the group 13 elements

The potential energy surfaces for the chemical reactions of four‐membered N‐heterocyclic group 13 heavy carbeneoid species have been studied using density functional theory (Becke, 3‐parameter, Lee‐Yang‐Parr (B3LYP)/Los Alamos National Laboratory 2‐Double‐Zeta (LANL2DZ)). Five four‐membered group 13 heavy carbeneoid species, iPr₂NC(NAr)₂E:, where E = B, Al, Ga, In, and Tl, have been chosen as model reactants in this work. Also, three kinds of chemical reactions, C? H bond insertion, alkene cycloaddition, and dimerization, have been used to study the chemical reactivities of these group 13 four‐membered N‐heterocyclic carbeneoid species. In principle, our present theoretical work predicts that the larger the ∠NEN bond angle of the four‐membered group 13 iPr₂NC(NAr)₂E: species, the smaller the singlet–triplet splitting, the lower the activation barrier, and, in turn, the more rapid its chemical reactions to various chemical species. Moreover, our theoretical investigations suggest that the relative carbenic reactivity decreases in the following order: B > Al > Ga > In > Tl. That is, the heavier the group 13 atom (E), the more stable its four‐membered carbeneoid toward chemical reactions is. As a result, our computations predict that the four‐membered heavy group 13 iPr₂NC(NAr)₂E: species (E = Al, Ga, In, and Tl) should be both kinetically and thermodynamically stable, and can be readily synthesized and isolated at room temperature. Furthermore, the singlet–triplet energy splitting of the four‐membered group 13 iPr₂NC(NAr)₂E: species, as described in the configuration mixing model attributed to the work of Pross and Shaik, can be used as a diagnostic tool to predict their reactivities. The results obtained allow a number of predictions to be made. © 2011 Wiley Periodicals, Inc. J Comput Chem, 2011     

Efficient photochemical synthesis of tricyclic keto‐indoles

Tricyclic keto‐indoles were synthesized by photocyclization of easily obtained enaminones in an electro‐cyclic photochemical reaction. The three methods reported were chosen according to the enaminone structure. The most general procedure using one‐step synthesis was carried out in a benzene‐methanol solution in the presence of sodium methylate. In the case of base sensitive substrates, the best method was photocyclization followed by oxidation. Besides, N‐unsubstituted indoles with a five‐membered ring were prepared by a photolysis reaction. All three methods are efficient and easy to perform.     

Synthesis and Characterization of [(1,4‐diamine)dichloro]platinum(II) Compounds Preliminary Studies on their Biological Activity

Two 1,4‐diamine ligands were synthesized having 1,2‐bis(aminomethyl)‐cyclohexane and 1,2‐bis(aminomethyl)‐benzene structures. The two ligands have different electron density in the six‐membered ring: a cyclohexane versus a phenyl ring. The organic synthesis of the ligands was carried out by synthetic pathways of seven and four steps, respectively, starting from 1,2,3,6‐tetrahydrophthalic anhydride and diethyl phthalate. The coordination of platinum to these ligands afforded platinum(II) complexes which are analogue to the clinical drug cisplatin but form a seven‐membered chelate ring. The interaction of the platinum compounds with DNA was studied in order to know the relationship between the electron density of ligands and their capability to chelate DNA, by using three techniques: Circular Dichroism, Agarose Gel Electrophoresis and Atomic Force Microscopy. The degree of interaction of both compounds with DNA was slightly different, but both complexes showed a cisplatin‐like behaviour and are promising candidates to follow an extensive study of their cytotoxic activity.     

Constitutionally isomeric alicyclic polyimides: Origin of siteselectivity in the reaction of unsymmetrical dianhydride and structure‐derived difference in physical properties

Two constitutionally isomeric alicyclic polyimides (PIs), head‐to‐head (HH) and random types, were successfully synthesized on the basis of a siteselective ring opening reaction of an unsymmetric spiroalicyclic dianhydride, rel‐[1R,5S,6R]‐3‐oxabicyclo[3,2,1]octane‐2,4‐dione‐6‐spiro‐3′‐(tetrahydrofuran‐2′,5′‐dione), with using several kinds of diamines only by changing reaction procedures. A model reaction study revealed that the origin of the siteselectivity in the reaction of the dianhydride was due to both the enhanced reactivity of six‐membered anhydride embedded in bicyclo[3.2.1] system and the reduced reactivity of five‐membered anhydride in the spiro[4.5] system. The HH‐PIs showed higher glass transition temperature and higher dielectric constant than those of random PIs. Specific gravity of the PI films showed that the differences in physical properties stem from different packing density of the two constitutionally isomeric PIs. This is the first example for constitutionally isomeric both amorphous polycondensates with different physical properties. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012