Porous Mn2O3: A Low‐Cost Electrocatalyst for Oxygen Reduction Reaction in Alkaline Media with Comparable Activity to Pt/C

Preparing nonprecious metal catalysts with high activity in the oxygen reduction reaction (ORR) can promote the development of energy conversion devices. Support‐free porous Mn₂O₃ was synthesized by a facile aerosol‐spray‐assisted approach (ASAA) and subsequent thermal treatment, and exhibited ORR activity that is comparable to commercial Pt/C The catalyst also exhibits notably higher activity than other Mn‐based oxides, such as Mn₃O₄ and MnO₂. The rotating ring disk electrode (RRDE) study indicates a typical 4‐electron ORR pathway on Mn₂O₃. Furthermore, the porous Mn₂O₃ demonstrates considerable stability and a good methanol tolerance in alkaline media. In light of the low cost and high earth abundance of Mn, the highly active Mn₂O₃ is a promising candidate to be used as a cathode material in metal–air batteries and alkaline fuel cells.     

Foamlike Porous Spinel MnxCo3−xO4 Material Derived from Mn3[Co(CN)6]2⋅nH2O Nanocubes: A Highly Efficient Anode Material for Lithium Batteries

A new facile strategy has been designed to fabricate spinel Mn_xCo_3?xO₄ porous nanocubes, which involves a morphology‐conserved and pyrolysis‐induced transformation of Prussian Blue Analogue Mn₃[Co(CN)₆]₂ ? nH₂O perfect nanocubes. Owing to the release of CO₂ and N_xO_y in the process of interdiffusion, this strategy can overcome to a large extent the disadvantage of the traditional ceramic route for synthesis of spinels, and Mn_xCo_3?xO₄ with foamlike porous nanostructure is effectively obtained. Importantly, when evaluated as an electrode material for lithium‐ion batteries, the foamlike Mn_xCo_3?xO₄ porous nanocubes display high specific discharge capacity and excellent rate capability. The improved electrochemical performance is attributed to the beneficial features of the particular foamlike porous nanostructure and large surface area, which reduce the diffusion length for Li⁺ ions and enhance the structural integrity with sufficient void space for buffering the volume variation during the Li⁺ insertion/extraction.     

One‐Step Pyro‐Synthesis of a Nanostructured Mn3O4/C Electrode with Long Cycle Stability for Rechargeable Lithium‐Ion Batteries

A nanostructured Mn₃O₄/C electrode was prepared by a one‐step polyol‐assisted pyro‐synthesis without any post‐heat treatments. The as‐prepared Mn₃O₄/C revealed nanostructured morphology comprised of secondary aggregates formed from carbon‐coated primary particles of average diameters ranging between 20 and 40 nm, as evidenced from the electron microscopy studies. The N₂ adsorption studies reveal a hierarchical porous feature in the nanostructured electrode. The nanostructured morphology appears to be related to the present rapid combustion strategy. The nanostructured porous Mn₃O₄/C electrode demonstrated impressive electrode properties with reversible capacities of 666 mAh g^?1 at a current density of 33 mA g^?1, good capacity retentions (1141 mAh g^?1 with 100 % Coulombic efficiencies at the 100^th cycle), and rate capabilities (307 and 202 mAh g^?1 at 528 and 1056 mA g^?1, respectively) when tested as an anode for lithium‐ion battery applications.     

Controlled Synthesis of Highly Crystallized Mesoporous Mn2O3 and Mn3O4 by Using Anionic Surfactants

Mesostructured manganese oxide (Mn₃O₄) is prepared by a soft‐templating method employing sodium dodecyl sulfate (SDS) as a structure‐directing agent. By removing the template from the as‐prepared mesostructured Mn₃O₄ by extraction or calcination, we successfully synthesized highly crystallized mesoporous Mn₃O₄ or Mn₂O₃, respectively, with different crystalline structures.     

Glucose Biosensor Using Glucose Oxidase and Electrospun Mn2O3‐Ag Nanofibers

The highly porous Mn₂O₃‐Ag nanofibers were fabricated by a facile two‐step procedure (electrospinning and calcination). The structure and composition of the Mn₂O₃‐Ag nanofibers were characterized by SEM, TEM, XRD, EDX and SAED. The as‐prepared Mn₂O₃‐Ag nanofibers were then employed as the immobilization matrix for glucose oxidase (GOD) to construct an amperometric glucose biosensor. The biosensor shows fast response to glucose, high sensitivity (40.60 µA mM^?1 cm^?2), low detection limit (1.73 µM at S/N=3), low K_m,app value and excellent selectivity. These results indicate that the novel Mn₂O₃‐Ag nanfibers‐GOD composite has great potential application in oxygen‐reduction based glucose biosensing.     

Mn3O4 nanoplates and nanoparticles: Synthesis, characterization, electrochemical and catalytic properties

Mn₃O₄ hexagonal nanoplates and nanoparticles were synthesized via a solvent-assisted hydrothermal oxidation process at low temperature and a solvothermal oxidation method, respectively. The synthesized product was characterized by powder X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), electron diffraction (ED), Fourier transform infrared (FT-IR) spectroscopy. Their capability of catalytic oxidation of formaldehyde to formic acid at room temperature and atmospheric pressure and electrochemical properties by cyclic voltammogram (CV) were compared. The results showed that Mn₃O₄ hexagonal nanoplate is a better catalyst, and the hexagonal nanoplates and nanoparticles modified electrodes blended with carbon black have a higher specific capacitance.     

A Facile Molten‐Salt Route for Large‐Scale Synthesis of NiFe2O4 Nanoplates with Enhanced Lithium Storage Capability

Binary metal oxides have been deemed as a promising class of electrode materials for high‐performance lithium ion batteries owing to their higher conductivity and electrochemical activity than corresponding monometal oxides. Here, NiFe₂O₄ nanoplates consisting of nanosized building blocks have been successfully fabricated by a facile, large‐scale NaCl and KCl molten‐salt route, and the changes in the morphology of NiFe₂O₄ as a function of the molten‐salt amount have been systemically investigated. The results indicate that the molten‐salt amount mainly influences the diameter and thickness of the NiFe₂O₄ nanoplates as well as the morphology of the nanosized building blocks. Cyclic voltammetry (CV) and galvanostatic charge–discharge measurements have been conducted to evaluate the lithium storage properties of the NiFe₂O₄ nanoplates prepared with a Ni(NO₃)₂/Fe(NO₃)₃/KCl/NaCl molar ratio of 1:2:20:60. A high reversible capacity of 888 mAh g^?1 is delivered over 100 cycles at a current density of 100 mA g^?1. Even at a current density of 5000 mA g^?1, the discharge capacity could still reach 173 mAh g^?1. Such excellent electrochemical performances of the NiFe₂O₄ nanoplates are contributed to the short Li⁺ diffusion distance of the nanosized building blocks and the synergetic effect of the Ni²⁺ and Fe³⁺ ions.     

Using Simple Spray Pyrolysis to Prepare Yolk–Shell‐Structured ZnO–Mn3O4 Systems with the Optimum Composition for Superior Electrochemical Properties

A spray‐pyrolysis process is introduced as an effective tool for the preparation of yolk–shell‐structured materials with electrochemical properties suitable for anode materials in Li‐ion batteries (LIBs). Yolk–shell‐structured ZnO–Mn₃O₄ systems with various molar ratios of the Zn and Mn components are prepared. The yolk–shell‐structured ZnO–Mn₃O₄ powders with a molar ratio of 1:1 of the Zn and Mn components are shown to have high capacities and good cycling performances.     

New-phased metastable V(2) O(3) porous urchinlike micronanostructures: facile synthesis and application in aqueous lithium ion batteries

New‐phased metastable V₂O₃ porous urchinlike micronanostructures were first fabricated on a large scale by a simple top‐down strategy of pyrolyzing a vanadyl ethylene glycolated precursor in the absence of any templates or matrices. The pyrolysis mechanism was clearly revealed by synchrotron vacuum ultraviolet (VUV) photoionization mass spectra for the first time. The new‐phased metastable V₂O₃ exhibits a body‐centered cubic bixbyite structure and shows structural evolution from metastable cubic symmetry to thermodynamically stable rhombohedral symmetry V₂O₃ (R) above 510 °C. Furthermore, the prepared V₂O₃ porous urchinlike micronanostructures, as anode materials in aqueous lithium ion batteries, exhibit improved electrochemical properties with relatively high first discharge capacity and better cycle retention relative to thermodynamically stable V₂O₃ (R), which is derived from its unique microscopic crystal structure and macroscopic 3D framework with rigid morphology, porous structure, and high specific surface area.     

Two‐Dimensional Hollow TiO2 Nanoplates with Enhanced Photocatalytic Activity

Two‐dimensional anatase TiO₂ hollow nanoplates were firstly synthesized through a facile synthesis route by using α‐Fe₂O₃ nanoplates as removable templates. Two‐dimensional hollow TiO₂ nanoplates with different ratios of anatase and rutile phases were obtained by adjusting the calcining temperature. The average diameters were around 600 nm, and the shell thickness was approximately 30 nm. The photocatalytic performance of TiO₂ was investigated by decomposing rhodamine B under simulated sunlight. Among the TiO₂ samples, the anatase TiO₂ hollow nanoplates manifested a significant enhancement in the photocatalytic performances. The excellent catalytic performance can be attributed to the unique structure of the two‐dimensional anatase TiO₂ hollow nanoplates, including a large surface area and increased dye–photocatalyst contact areas as well as more active sites for photodegradation.     

Self‐Template Synthesis of Hybrid Porous Co3O4–CeO2 Hollow Polyhedrons for High‐Performance Supercapacitors

In this work, hybrid porous Co₃O₄–CeO₂ hollow polyhedrons have been successfully obtained via a simple cation‐exchange route followed by heat treatment. In the synthesis process, ZIF‐67 polyhedron frameworks are firstly prepared, which not only serve as a host for the exchanged Ce3⁺ ions but also act as the template for the synthesis of hybrid porous Co₃O₄–CeO₂ hollow polyhedrons. When utilized as electrode materials for supercapacitors, the hybrid porous Co₃O₄–CeO₂ hollow polyhedrons delivered a large specific capacitance of 1288.3 F g^?1 at 2.5 A g^?1 and a remarkable long lifespan cycling stability (<3.3 % loss after 6000 cycles). Furthermore, an asymmetric supercapacitor (ASC) device based on hybrid porous Co₃O₄–CeO₂ hollow polyhedrons was assembled. The ASC device possesses an energy density of 54.9 W h kg^?1, which can be retained to 44.2 W h kg^?1 even at a power density of 5100 W kg^?1, indicating its promising application in electrochemical energy storage. More importantly, we believe that the present route is a simple and versatile strategy for the preparation of other hybrid metal oxides with desired structures, chemical compositions and applications.     

Carbonyl‐Grafted g‐C3N4 Porous Nanosheets for Efficient Photocatalytic Hydrogen Evolution

Carbonyl‐grafted g‐C₃N₄ porous nanosheets (COCNPNS) were fabricated by means of a two‐step thermal process using melamine and oxalic acid as starting reagents. The combination of melamine with oxalic acid to form a melamine–oxalic acid supramolecule as a precursor is key to synthesizing carbonyl‐grafted g‐C₃N₄. The bulk carbonyl‐grafted g‐C₃N₄ (COCN) was further thermally etched onto porous nanosheets by O₂ under air. In such a process, the carbonyl groups were partly removed and the obtained sample showed remarkably enhanced visible‐light harvesting and promoted the separation and transfer of photogenerated electrons and holes. With its unique porous structure and enhanced light‐harvesting capability, under visible‐light illumination (λ >420 nm) the prepared COCNPNS exhibited a superior photocatalytic hydrogen evolution rate of 83.6 μmol h⁻¹, which is 26 times that of the p‐CN obtained directly from thermal polycondensation of melamine.     

Synthesis of Single‐Crystalline Spinel LiMn2O4 Nanorods for Lithium‐Ion Batteries with High Rate Capability and Long Cycle Life

The long‐standing challenge associated with capacity fading of spinel LiMn₂O₄ cathode material for lithium‐ion batteries is investigated. Single‐crystalline spinel LiMn₂O₄ nanorods were successfully synthesized by a template‐engaged method. Porous Mn₃O₄ nanorods were used as self‐sacrificial templates, into which LiOH was infiltrated by a vacuum‐assisted impregnation route. When used as cathode materials for lithium‐ion batteries, the spinel LiMn₂O₄ nanorods exhibited superior long cycle life owing to the one‐dimensional nanorod structure, single‐crystallinity, and Li‐rich effect. LiMn₂O₄ nanorods retained 95.6 % of the initial capacity after 1000 cycles at 3C rate. In particular, the nanorod morphology of the spinel LiMn₂O₄ was well‐preserved after a long‐term cycling, suggesting the ultrahigh structural stability of the single crystalline spinel LiMn₂O₄ nanorods. This result shows the promising applications of single‐crystalline spinel LiMn₂O₄ nanorods as cathode materials for lithium‐ion batteries with high rate capability and long cycle life.     

Graphene‐Assisted Room‐Temperature Synthesis of 2D Nanostructured Hybrid Electrode Materials: Dramatic Acceleration of the Formation Rate of 2D Metal Oxide Nanoplates Induced by Reduced Graphene Oxide Nanosheets

A new prompt room temperature synthetic route to 2D nanostructured metal oxide–graphene‐hybrid electrode materials can be developed by the application of colloidal reduced graphene oxide (RGO) nanosheets as an efficient reaction accelerator for the synthesis of δ‐MnO₂ 2D nanoplates. Whereas the synthesis of the 2D nanostructured δ‐MnO₂ at room temperature requires treating divalent manganese compounds with persulfate ions for at least 24 h, the addition of RGO nanosheet causes a dramatic shortening of synthesis time to 1 h, underscoring its effectiveness for the promotion of the formation of 2D nanostructured metal oxide. To the best of our knowledge, this is the first example of the accelerated synthesis of 2D nanostructured hybrid material induced by the RGO nanosheets. The observed acceleration of nanoplate formation upon the addition of RGO nanosheets is attributable to the enhancement of the oxidizing power of persulfate ions, the increase of the solubility of precursor MnCO₃, and the promoted crystal growth of δ‐MnO₂ 2D nanoplates. The resulting hybridization between RGO nanosheets and δ‐MnO₂ nanoplates is quite powerful not only in increasing the surface area of manganese oxide nanoplate but also in enhancing its electrochemical activity. Of prime importance is that the present δ‐MnO₂–RGO nanocomposites show much superior electrode performance over most of 2D nanostructured manganate systems including a similar porous assembly of RGO and layered MnO₂ nanosheets. This result underscores that the present RGO‐assisted solution‐based synthesis can provide a prompt and scalable method to produce nanostructured hybrid electrode materials.     

Properties and Structure of Spinel Li‐Mn‐O‐F Compounds for Cathode Materials of Secondary Lithium‐ion Battery

The spinel Li‐Mn‐O‐F compound cathode materials were synthesized by solid‐state reaction from calculated amounts LiOH‐H₂O, MnO₂(EMD) and LiF. The results of the electrochemical test demonstrated that these materials exhibited excellent electrochemical properties. It's initial capacity is ‐ 115 mAh.g¹ and reversible efficiency is about 100%. After 60 cycles, its capacity is still around 110 mAh.g¹ with nearly 100% reversible efficiency. The spinel Li‐Mn‐O‐F compound possibly has two structure models: interstitial model [Li]‐[Mn³⁺_xMn⁴⁺_2‐x]O₄F_δ, in which the fluorine is located on the interstice of crystal lattice, and substituted model [Li]‐[Mn³⁺_xMn⁴⁺_2‐x]O_4‐δF_δ, which the fluorine atom substituted the oxygen atom. The electrochemical result supports the interstitial model [Li][Mn³⁺_xMn⁴⁺_2‐x]O₄F_δ.     

Sodium‐Doped Mesoporous Ni2P2O7 Hexagonal Tablets for High‐Performance Flexible All‐Solid‐State Hybrid Supercapacitors

A simple hydrothermal method has been developed to prepare hexagonal tablet precursors, which are then transformed into porous sodium‐doped Ni₂P₂O₇ hexagonal tablets by a simple calcination method. The obtained samples were evaluated as electrode materials for supercapacitors. Electrochemical measurements show that the electrode based on the porous sodium‐doped Ni₂P₂O₇ hexagonal tablets exhibits a specific capacitance of 557.7 F g^?1 at a current density of 1.2 A g^?1. Furthermore, the porous sodium‐doped Ni₂P₂O₇ hexagonal tablets were successfully used to construct flexible solid‐state hybrid supercapacitors. The device is highly flexible and achieves a maximum energy density of 23.4 Wh kg^?1 and a good cycling stability after 5000 cycles, which confirms that the porous sodium‐doped Ni₂P₂O₇ hexagonal tablets are promising active materials for flexible supercapacitors.     

Synthesis and Characterization of β‐Co(OH)2, CuO and ZnO Nanostructures by Solvothermal Method without Any Additive

β‐Co(OH)₂, CuO and ZnO nanostructures with plate‐like, particle‐like and flower‐like morphologies were prepared through the use of simple solvothermal method using of melt salt and 1,10‐phenanthroline as complexing agent and sodium hydroxide. β‐Co(OH)₂ consisted of a plate‐like structure, and the nanoplates size was about 29 nm. The structure was comprised of regular sheets which were assembled together. Furthermore, the as‐obtained β‐Co(OH)₂ nanoplates can be easily converted into Co₃O₄ nanoplates by calcining in air at 500 °C for 2 h. The results indicate that ZnO powder is of hexagonal wurtzite structure and well crystallized with high purity. CuO powder is pure monoclinic‐structured crystalline. The products were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared (FT‐IR) spectra. Possible formation mechanism of the nanostructures is proposed.     

Oxygen‐Atom Transfer Chemistry and Thermolytic Properties of a Di‐tert‐Butylphosphate‐Ligated Mn4O4 Cubane

[Mn₄O₄{O₂P(OtBu)₂}₆] ( 1 ), an Mn₄O₄ cubane complex combining the structural inspiration of the photosystem II oxygen‐evolving complex with thermolytic precursor ligands, was synthesized and fully characterized. Core oxygen atoms within complex 1 are transferred upon reaction with an oxygen‐atom acceptor (PEt₃), to give the butterfly complex [Mn₄O₂{O₂P(OtBu)₂}₆(OPEt₃)₂]. The cubane structure is restored by reaction of the latter complex with the O‐atom donor PhIO. Complex 1 was investigated as a precursor to inorganic Mn metaphosphate/pyrophosphate materials, which were studied by X‐ray absorption spectroscopy to determine the fate of the Mn₄O₄ unit. Under the conditions employed, thermolyses of 1 result in reduction of the manganese to Mn^II species. Finally, the related butterfly complex [Mn₄O₂{O₂P(pin)}₆(bpy)₂] (pin=pinacolate) is described.     

Temperature‐Induced Structure Reconstruction to Prepare a Thermally Stable Single‐Atom Platinum Catalyst

Single‐atom noble metals on a catalyst support tend to migrate and agglomerate into nanoparticles owing to high surface free energy at elevated temperatures. Temperature‐induced structure reconstruction of a support can firmly anchor single‐atom Pt species to adapt to a high‐temperature environment. We used Mn₃O₄ as a restructurable support to load single‐atom Pt and further turned into single‐atom Pt‐on‐Mn₂O₃ catalyst via high‐temperature treatment, which is extremely stable under calcination conditions of 800 °C for 5 days in humid air. High‐valence Pt⁴⁺ with more covalent bonds on Mn₂O₃ are essential for anchoring isolated Pt atoms by strong interaction. An optimized catalyst formed by moderate H₂O₂ etching exhibits the best performance and excellent thermal stability of single‐atom Pt in high‐temperature CH₄ oxidation on account of more exposed Pt atoms and strong Pt‐Mn₂O₃ interaction.     

Diesel Soot Combustion over Mn2O3 Catalysts with Different Morphologies: Elucidating the Role of Active Oxygen Species in Soot Combustion

Catalytic diesel soot combustion was examined using a series of Mn₂O₃ catalysts with different morphologies, including plate, prism, hollow spheres and powders. The plate‐shaped Mn₂O₃ (Mn₂O₃‐plate) exhibited superior carbon soot combustion activity compared to the prism‐shaped, hollow‐structured and powdery Mn₂O₃ under both tight and loose contact modes at soot combustion temperatures (T₅₀) of 327 °C and 457 °C, respectively. Comprehensive characterization studies using scanning electron microscopy, scanning transmission electron microscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy, temperature‐programmed reduction and oxygen release measurements, revealed that the improved activity of Mn₂O₃‐plate was mainly attributed to the high oxygen release rate of surface‐adsorbed active oxygen species, which originated from oxygen vacancy sites introduced during the catalyst preparation, rather than specific surface‐exposed planes. The study provides new insights for the design and synthesis of efficient oxidation catalysts for carbon soot combustion as well as for other oxidation reactions of harmful hydrocarbon compounds.