Highly Water‐Dispersible Surface‐Modified Gd2O3 Nanoparticles for Potential Dual‐Modal Bioimaging

Water‐dispersible and luminescent gadolinium oxide (GO) nanoparticles (NPs) were designed and synthesized for potential dual‐modal biological imaging. They were obtained by capping gadolinium oxide nanoparticles with a fluorescent glycol‐based conjugated carboxylate (H L ). The obtained nanoparticles (GO‐ L ) show long‐term colloidal stability and intense blue fluorescence. In addition, L can sensitize the luminescence of europium(III) through the so‐called antenna effect. Thus, to extend the spectral ranges of emission, europium was introduced into L‐ modified gadolinium oxide nanoparticles. The obtained Eu^III‐doped particles (Eu:GO‐ L ) can provide visible red emission, which is more intensive than that without L capping. The average diameter of the monodisperse modified oxide cores is about 4 nm. The average hydrodynamic diameter of the L ‐modified nanoparticles was estimated to be about 13 nm. The nanoparticles show effective longitudinal water proton relaxivity. The relaxivity values obtained for GO‐ L and Eu:GO‐ L were r₁=6.4 and 6.3 s^?1 mM ^?1 with r₂/r₁ ratios close to unity at 1.4 T. Longitudinal proton relaxivities of these nanoparticles are higher than those of positive contrast agents based on gadolinium complexes such as Gd‐DOTA, which are commonly used for clinical magnetic resonance imaging. Moreover, these particles are suitable for cellular imaging and show good biocompatibility.     

Comparison of Cu‐ZSM‐5 Zeolites and Cu‐MOF‐505 Metal‐Organic Frameworks as Heterogeneous Catalysts for the Mukaiyama Aldol Reaction: A DFT Mechanistic Study

The density functional theory (DFT) model ONIOM(M06L/6‐311++G(2df,2p):UFF was employed to reveal the catalytic activity of Cu^II in the paddle‐wheel unit of the metal‐organic framework (MOF)‐505 material in the Mukaiyama aldol reaction compared with the activity of Cu‐ZSM‐5 zeolites. The aldol reaction between a silyl enol ether and formaldehyde catalyzed by the Lewis acidic site of both materials takes place through a concerted pathway, in which the formation of the C? C bond and the transfer of the silyl group occurs in a single step. MOF‐505 and Cu‐ZSM‐5 are predicted to be efficient catalysts for this reaction as they strongly activate the formaldehyde carbonyl carbon electrophile, which leads to a considerably lower reaction barrier compared with the gas‐phase system. Both MOF‐505 and Cu‐ZSM‐5 catalysts stabilize the reacting species along the reaction coordinate, thereby lowering the activation energy, compared to the gas‐phase system. The activation barriers for the MOF‐505, Cu‐ZSM‐5, and gas‐phase system are 48, 21, and 61 kJ mol^?1, respectively. Our results show the importance of the enveloping framework by stabilizing the reacting species and promoting the reaction.     

A Chemical Strategy for the Relaxivity Enhancement of GdIII Chelates Anchored on Mesoporous Silica Nanoparticles

Functionalised MCM‐41 mesoporous silica nanoparticles were used as carriers of Gd^III complexes for the development of nanosized magnetic resonance imaging contrast agents. Three Gd^III complexes based on the 1,4,7,10‐tetraazacyclododecane scaffold (DOTA; monoamide‐, DOTA‐ and DO3A‐like complexes) with distinct structural and magnetic properties were anchored on the silica nanoparticles functionalised with NH₂ groups. The interaction between Gd^III chelates and surface functional groups markedly influenced the relaxometric properties of the hybrid materials, and were deeply modified passing from ionic ? NH₃⁺ to neutral amides. A complete study of the structural, textural and surface properties together with a full ¹H relaxometric characterisation of these hybrid materials before and after surface modification was carried out. Particularly for the anionic complex 2 attached to MCM‐41, an impressive increase in relaxivity (r_1p) was observed (from 20.3 to 37.8 mM ^?1 s^?1, 86.2 % enhancement at 20 MHz and 310 K), mainly due to a threefold faster water exchange rate after acetylation of the surface ? NH₃⁺ ions. This high r_1p value, coupled with the large molar amount of grafted 2 onto the silica nanoparticles gives rise to a value of relaxivity per particle of 29 500 mM ^?1 s^?1, which possibly allows it to be used in molecular imaging procedures. Smaller changes were observed for the hybrid materials based on neutral 1 and 3 complexes. In fact, whereas 1 shows a weak interaction with the surface and acetylation induced only some decrease of the local rotation, complex 3 appears to be involved in a strong interaction with surface silanols. This results in the displacement of a coordinated water molecule and in a decrease of the accessibility of the solvent to the metal centre, which is unaffected by the modification of ammonium ions to neutral amides.     

On the Controversial Fitting of Susceptibility Curves of Ferromagnetic CuII Cubanes: Insights from Theoretical Calculations

This paper reports a theoretical analysis of the electronic structure and magnetic properties of a tetranuclear Cu^II complex, [Cu₄(HL)₄], which has a 4+2 cubane‐like structure (H₃L=N,N′‐(2‐hydroxypropane‐1,3‐diyl)bis(acetylacetoneimine)). These theoretical calculations indicate a quintet (S=2) ground state; the energy‐level distribution of the magnetic states confirm Heisenberg behaviour and correspond to an S₄ spin–spin interaction model. The dominant interaction is the ferromagnetic coupling between the pseudo‐dimeric units (J₁=22.2 cm^?1), whilst a weak and ferromagnetic interaction is found within the pseudo‐dimeric units (J₂=1.4 cm^?1). The amplitude and sign of these interactions are consistent with the structure and arrangement of the magnetic Cu 3d orbitals; they accurately simulate the thermal dependence of magnetic susceptibility, but do not agree with the reported J values (J₁=38.4 cm^?1, J₂=?18.0 cm^?1) that result from the experimental fitting. This result is not an isolated case; many other polynuclear systems, in particular 4+2 Cu^II cubanes, have been reported in which the fitted magnetic terms are not consistent with the geometrical features of the system. In this context, theoretical evaluation can be considered as a valuable tool in the interpretation of the macroscopic behaviour, thus providing clues for a rational and directed design of new materials with specific properties.     

Broadening the Scope for Fluoride‐Free Synthesis of Siliceous Zeolites

Siliceous zeolites are ideally suited for emerging applications in gas separations, sensors, and the next generation of low‐k dielectric materials, but the use of fluoride in the synthesis significantly hinders their commercialization. Herein, we show that the dry gel conversion (DGC) technique can overcome this problem. Fluoride‐free synthesis of two siliceous zeolites—AMH‐4 (CHA‐type) and AMH‐5 (STT‐type), has been achieved for the first time using the method. Siliceous *BEA‐, MFI‐, and *MRE‐type zeolites have also been synthesized to obtain insights into the crystallization process. Charge‐balancing interactions between the inorganic cation, organic structure‐directing agent (OSDA), and Si?O^? defects are found to be an essential aspect. We quantify this factor in terms of the “OSDA charge/silica ratio” of the as‐made zeolites and demonstrate that the DGC technique is broadly applicable and opens up new avenues for fluoride‐free siliceous zeolite synthesis.     

Preparation of Highly Efficient MRI Contrast Agents through Complexation of Cationic GdIII‐Containing Metallosurfactant with Biocompatible Polyelectrolytes

Novel contrast agents were developed through assembling of Gd^III‐containing metallosurfactant (MS) with biocompatible polyelectrolytes sodium hyaluronate (HA), heparinsodium (HS) and dextran sulfate sodium (DSS). The formed polyelectrolyte–surfactant complexes showed different structural patterns as the charge ratio increased, including spherical aggregates, rod‐like aggregates and network patterns in monovalent HA system, while spherical structures emerged in multivalent HS and DSS systems. Energy dispersive spectroscopy analysis and scanning electron microscopy mapping showed the presence of Gd^III in these complexes. Inductively coupled plasma atomic emission spectrometry was further used to quantify the contents of Gd^III in the assemblies. T1 magnetic resonance imaging showed that these Gd^III‐loaded complexes exhibited relaxivity of up to 63.81 mM ^?1 s^?1, much higher than that of Ominiscan (4.64 mM ^?1 s^?1). The cytotoxicity test in vitro demonstrated the excellent biocompatibility of these complexes, which is essential for clinical application.     

Rational Design of MOF/COF Hybrid Materials for Photocatalytic H2 Evolution in the Presence of Sacrificial Electron Donors

Crystalline and porous covalent organic frameworks (COFs) and metal‐organic frameworks (MOFs) materials have attracted enormous attention in the field of photocatalytic H₂ evolution due to their long‐range order structures, large surface areas, outstanding visible light absorbance, and tunable band gaps. In this work, we successfully integrated two‐dimensional (2D) COF with stable MOF. By covalently anchoring NH₂‐UiO‐66 onto the surface of TpPa‐1‐COF, a new type of MOF/COF hybrid materials with high surface area, porous framework, and high crystallinity was synthesized. The resulting hierarchical porous hybrid materials show efficient photocatalytic H₂ evolution under visible light irradiation. Especially, NH₂‐UiO‐66/TpPa‐1‐COF (4:6) exhibits the maximum photocatalytic H₂ evolution rate of 23.41 mmol g^?1 h^?1 (with the TOF of 402.36 h^?1), which is approximately 20 times higher than that of the parent TpPa‐1‐COF and the best performance photocatalyst for H₂ evolution among various MOF‐ and COF‐based photocatalysts.     

Assembly of the Thiolated [Au1Ag22(S‐Adm)12]3+ Superatom Complex into a Framework Material through Direct Linkage by SbF6− Anions

Building framework materials with desirable properties and enhanced functionalities with nanocluster/superatom complexes as building blocks remains a challenge in the field of nanomaterials. In this study, the chiral [Au₁Ag₂₂(S‐Adm)₁₂]³⁺ nanocluster/superatom complex (SC, in which S‐Adm=1‐adamantanethiol) was employed as a building block to construct the three‐dimensional (3D) superatom complex inorganic framework (SCIF) materials SCIF‐1 and SCIF‐2 through inorganic SbF₆^? linkers. SCIF‐1 is racemic due to the assembly of two SC enantiomers in a single crystal. In SCIF‐2, the SC enantiomers are packed in separate crystals, thus producing larger channels and a circularly polarized luminescence (CPL) response. These two 3D SCIF materials exhibit unique sensitive photoluminescence (PL) in protic solvents. Our study provides a new pathway for creating novel open‐framework materials with superatom complexes and a foundation for the further development of 3D framework materials for sensing and other applications.     

A Highly Stable and Magnetically Recyclable Nanocatalyst System: Mesoporous Silica Spheres Embedded with FeCo/Graphitic Shell Magnetic Nanoparticles and Pt Nanocatalysts

We have developed a highly stable and magnetically recyclable nanocatalyst system for alkene hydrogenation. The materials are composed of mesoporous silica spheres (MSS) embedded with FeCo/graphitic shell (FeCo/GC) magnetic nanoparticles and Pt nanocatalysts (Pt‐FeCo/GC@MSS). The Pt‐FeCo/GC@MSS have superparamagnetism at room temperature and show type IV isotherm typical for mesoporous silica, thereby ensuring a large enough inner space (surface area of 235.3 m² g^?1, pore volume of 0.165 cm³ g^?1, and pore diameter of 2.8 nm) to undergo catalytic reactions. We have shown that the Pt‐FeCo/GC@MSS system readily converts cyclohexene into cyclohexane, which is the only product isolated and Pt‐FeCo/GC@MSS can be seperated very quickly by an external magnetic field after the catalytic reaction is finished. We have demonstrated that the recycled Pt‐FeCo/GC@MSS can be reused further for the same hydrogenation reaction at least four times without loss in the initial catalytic activity.     

Radiofluorination of a Pre‐formed Gallium(III) Aza‐macrocyclic Complex: Towards Next‐Generation Positron Emission Tomography (PET) Imaging Agents

As part of a study to investigate the factors influencing the development of new, more effective metal‐complex‐based positron emission tomography (PET) imaging agents, the distorted octahedral complex, [GaCl(L)]?2 H₂O has been prepared by reaction of 1‐benzyl‐1,4,7‐triazacyclononane‐4,7‐dicarboxylic acid hydrochloride (H₂L?HCl) with Ga(NO₃)₃?9 H₂O, which is a convenient source of Ga^III for reactions in water. Spectroscopic and crystallographic data for [GaCl(L)]?2 H₂O are described, together with the crystal structure of [GaCl(L)]?MeCN. Fluorination of this complex by Cl^?/F^? exchange was achieved in high yield by treatment with KF in water at room temperature over 90 minutes, although the reaction was complete in approximately 30 minutes if heated to 80 °C, giving [GaF(L)]?2 H₂O in good yield. The same complex was obtained by hydrothermal synthesis from GaF₃?3 H₂O and Li₂L, and has been characterised by single‐crystal X‐ray analysis, IR, ¹H and ¹⁹F{¹H} NMR spectroscopy and ESI⁺ MS. Radiofluorination of the pre‐formed [GaCl(L)]?2 H₂O has been demonstrated on a 210 nanomolar scale in aqueous NaOAc at pH 4 by using carrier‐free ¹⁸F^?, leading to 60–70 % ¹⁸F‐incorporation after heating to 80 °C for 30 minutes. The resulting radioproduct was purified easily by using a solid‐phase extraction (SPE) cartridge, leading to 98–99 % radiochemical purity. The [Ga¹⁸F(L)] is stable for at least 90 minutes in 10 % EtOH/NaOAc solution at pH 6, but defluorinates over this time scale at pH of approximately 7.5 in phosphate buffered saline (PBS) or human serum albumin (HSA). The subtle role of the Group 13 metal ion and co‐ligand donor set in influencing the pH dependence of this system is discussed in the context of developing potential new imaging agents for PET.     

How Water and Ion Mobility Affect the NMR Fingerprints of the Hydrated JBW Zeolite: A Combined Computational-Experimental Investigation

An important aspect within zeolite synthesis is to make fully tunable framework materials with controlled aluminium distribution. A major challenge in characterising these zeolites at operating conditions is the presence of water. In this work, we investigate the effect of hydration on the ²⁷Al NMR parameters of the ultracrystalline K,Na-compensated aluminosilicate JBW zeolite using experimental and computational techniques. The JBW framework, with Si/Al ratio of 1, is an ideal benchmark system as a stepping stone towards more complicated zeolites. The presence and mobility of water and extraframework species directly affect NMR fingerprints. Excellent agreement between theoretical and experimental spectra is obtained provided dynamic methods are employed with hydrated structural models. This work shows how NMR is instrumental in characterising aluminium distributions in zeolites at operating conditions.     

Defect Models of As‐Made High‐Silica Zeolites: Clusters of Hydrogen‐Bonds and Their Interaction with the Organic Structure‐Directing Agents Determined from 1H Double and Triple Quantum NMR Spectroscopy

Internal defect SiOH and SiO^? groups evolve during the structure formation of high‐Si zeolites in the presence of a cationic organic structure‐directing agent (SDA). These negatively charged defects do not completely disappear upon calcination. Herein we investigate the clustering of defect groups and their location within the pore walls of four zeolites. ZSM‐12, ZSM‐5, and SSZ‐74 have three clustered SiOH groups which are hydrogen‐bonded to SiO^?, whereas SSZ‐24 has only two. These defects interact with the structure‐directing quaternary ammonium ions preferably close to the charge center, unless steric shielding is present. The framework topologies of ZSM‐12, ZSM‐5, and SSZ‐24 have connected six‐rings where the organics interact with the defects. It is suggested that these six‐ring patterns form connectivity defects. SSZ‐74 is unique, it does not contain an extended six‐ring motif, so vacancy defects form instead.     

Concerted Bimetallic Nanocluster Synthesis and Encapsulation via Induced Zeolite Framework Demetallation for Shape and Substrate Selective Heterogeneous Catalysis

Bimetallic nanoparticle encapsulation in microporous zeolite crystals is a promising route for producing catalysts with unprecedented reaction selectivities. Herein, a novel synthetic approach was developed to produce PtZn_x nanoclusters encapsulated inside zeolite micropores by introducing Pt²⁺ cations into a zincosilicate framework via ion exchange, and subsequent controlled demetallation and alloying with framework Zn. The resulting zeolites featured nanoclusters with sizes of approximately 1 nm, having an interatomic structure corresponding to a PtZn_x alloy as confirmed by pair distribution function (PDF) analysis. These materials featured simultaneous shape and substrate specificity demonstrated by the selective production of p‐chloroaniline from the competitive hydrogenation of p‐chloronitrobenzene and 1,3‐dimethyl‐5‐nitrobenzene.     

Cubic Mesoporous Titanium Phosphonates with Multifunctionality

Cubic mesoporous titanium phosphonate materials with bridged organic groups inside the framework were synthesized by means of a one‐pot hydrothermal autoclaving process, with the assistance of cationic surfactant cetyltrimethylammonium bromide. 1‐Hydroxyethylidene‐1,1‐diphosphonic acid was used as the coupling molecule. A typical cubic mesophase with surface area of 1052 m² g^?1 and pore size of 2.6 nm was confirmed by XRD, TEM, and N₂ sorption analysis. The organophosphonate groups were homogeneously incorporated in the network of the mesoporous solids, as revealed by FTIR and magic‐angle spinning (MAS) NMR spectroscopy, and thermogravimetry and differential scanning calorimetry (TG‐DSC) measurements. The synthesized hydroxyethylidene‐bridged cubic mesoporous titanium phosphonates proved to be thermally stable up to 350 °C, with a well‐preserved hybrid framework and cubic mesoporous architecture. The obtained cubic mesophase could be transformed into a hexagonal mesophase by simply adjusting the molar ratios of the added raw materials, namely, a Ti/P molar ratio of 1:4 and a CTAB/Ti molar ratio of 1.9–2.3 for the cubic phase and Ti/P molar ratio of 3:4 and CTAB/Ti molar ratio of 0.1–0.4 for the hexagonal phase. The cubic hybrid materials could be used as efficient photocatalysts for the photodegradation of rhodamine B. Moreover, they were also used for adsorption of CO₂ and heavy metal ions and exhibited a significant capture amount of around 1.0 mmol g^?1 for CO₂ molecules at 35 °C and high adsorption capacity of 28.5 μmol g^?1 for Cu²⁺ ions with good reusability, which demonstrated their promising potential in environmental remediation.     

Boosting Proton Conductivity in Highly Robust 3D Inorganic Cationic Extended Frameworks through Ion Exchange with Dihydrogen Phosphate Anions

The limited long‐term hydrolytic stability of rapidly emerging 3D‐extended framework materials (MOFs, COFs, MOPs, etc.) is still one of major barriers for their practical applications as new solid‐state electrolytes in fuel cells. To obtain hydrolytically stable materials, two H₂PO₄^?‐exchanged 3D inorganic cationic extended frameworks (CEFs) were successfully prepared by a facile anion‐exchange method. Both anion‐exchanged CEFs (YbO(OH)P and NDTBP) show significantly enhanced proton conductivity when compared with the original materials (YbO(OH)Cl and NDTB) with an increase of up to four orders‐of‐magnitude, reaching 2.36×10^?3 and 1.96×10^?2 S cm^?1 at 98 % RH and 85 °C for YbO(OH)P and NDTBP, respectively. These values are comparable to the most efficient proton‐conducting MOFs. In addition, these two anion‐exchanged materials are stable in boiling water, which originates from the strong electrostatic interaction between the H₂PO₄^? anion and the cationic host framework, showing a clear advance over all the acid‐impregnated materials (H₂SO₄@MIL‐101, H₃PO₄@MIL‐101, and H₃PO₄@Tp‐Azo) as practical solid‐state fuel‐cell electrolytes. This work offers a new general and efficient approach to functionalize 3D‐extended frameworks through an anion‐exchange process and achieves water‐stability with ultra‐high proton conductivity above 10^?2 S cm^?1.     

A Series of Amino Acid Functionalized Tripodal Hexaamide Anion Receptors: Ion‐Pair‐Assisted Capped‐Cleft Formation by a Pentafluorophenyl‐Functionalized Amide

A new series of tris(2‐aminoethyl)amine (tren)‐based L ‐alanine amino acid backboned tripodal hexaamide receptors (L1–L5) with various attached moieties based on electron‐withdrawing fluoro groups and lipophilicity have been synthesized and characterized. Detailed binding studies of L1–L5 with different anions, such as halides (F^?, Cl^?, Br^?, and I^?) and oxyanions (AcO^?, BzO^? (Bz=benzoyl), NO₃^?, H₂PO₄^?, and HSO₄^?), have been carried out by isothermal titration calorimetric (ITC) experiments in acetonitrile/dimethylsulfoxide (99.5:0.5 v/v) at 298 K. ITC titration experiments have clearly shown that receptors L1–L4 invariably form 1:1 complexes with Cl^?, AcO^?, BzO^?, and HSO₄^?, whereas L5 forms a 1:1 complex only with AcO^?. In the case of Br^?, I^?, and NO₃^?, no appreciable heat change is observed owing to weak interactions between these anions and receptors; this is further confirmed by ¹H NMR spectroscopy. The ITC binding studies of F^? and H₂PO₄^? do not fit well for a 1:1 binding model. Furthermore, ITC binding studies also revealed slightly higher selectivity of this series of receptors towards AcO^? over Cl^?, BzO^?, and HSO₄^?. Solid‐state structural evidence for the recognition of Cl^? by this new category of receptor was confirmed by single‐crystal X‐ray structural analysis of the complex of tetrabutylammonium chloride (TBACl) and L1. Single‐crystal X‐ray diffraction clearly showed that the pentafluorophenyl‐functionalized amide receptor (L1) encapsulated Cl^? in its cavity by hydrogen bonds from amides, and the cavity of L1 was capped with a TBA cation through hydrogen bonding and ion‐pair interactions to form a capped‐cleft orientation. To understand the role of the cationic counterpart in solution‐state Cl^? binding processes with this series of receptors (L1–L4), a detailed Cl^? binding study was carried out with three different tetraalkylammonium (Me₄N⁺, Et₄N⁺, and Bu₄N⁺) salts of Cl^?. The binding affinities of these receptors with different tetralkylammonium salts of Cl^? gave binding constants with the TBA cation in the following order: butyl>ethyl>methyl. This study further supports the role of the TBA countercation in ion‐pair recognition by this series of receptors.     

Tetraphenylporphyrin‐based dual‐functional medical agent for magnetic resonance and fluorescence imaging

A bimodal magnetic resonance imaging contrast agent, TPP‐M‐Gd, was developed by modifying tetraphenylporphyrin (TPP) with a small dendritic molecule as a ligand (M) to chelate gadolinium (Gd) ions. The ligand featured four carboxylate groups, which contributed to good water solubility and a strong combination with metal ions. The longitudinal relaxivity (R₁) of the resulting agent was calculated to be 12.45 mM^?1 s^?1, which is much higher than that of DTPA‐Gd (4.49 mM^?1 s^?1). The magnetic resonance imaging experiments showed that the newly synthesized contrast agent could enhance T₁‐weighted magnetic resonance imaging quality both in vitro and in vivo. In addition, TPP‐M‐Gd exhibited good fluorescent property as shown in cell imaging experiments. The cytotoxicity of TPP‐M‐Gd was even better than that of clinically approved DTPA‐Gd, which makes it a promising dual‐functional medical imaging agent to provide more detailed information about biological and disease‐related events.     

Quinolinium‐Based Fluorescent Probes for the Detection of Thiophenols in Environmental Samples and Living Cells

A new type of fluorescent probes for thiophenols, 6HQM‐DNP and 7HQM‐DNP, containing 6‐ or 7‐hydroxy quinonlinium as fluorophore and 2,4‐dinitrophenoxy (DNP) as nucleophilic recognition unit were constructed. As ethers, these non‐fluorescent probe molecules can release the corresponding fluorescent quinolinium (6HQM and 7HQM) through aromatic nucleophilic substitution (S_NAr) by thiolate anions from thiophenols. The sensing reaction is highly sensitive (detection limit of 8 nM for 7HQM‐DNP) and highly selective to thiophenols over aliphatic thiols and other nucleophiles under neutral conditions (pH 7.3). The probes respond rapidly to thiophenols, with second‐order rate constants k=45 M ^?1 s^?1 for 7HQM‐DNP and 24 M ^?1 s^?1 for 6HQM‐DNP. Furthermore, the selective detection of thiophenols in living cells by 7HQM‐DNP was demonstrated by confocal fluorescence imaging. In addition, these quinolinium salts show excellent chemical and thermal stability. In conclusion, this type of probes may find use in the detection of thiophenols in environmental samples and biosystems.     

Semiconducting Clathrates Meet Gas Hydrates: Xe24[Sn136]

Semiconducting Group 14 clathrates are inorganic host–guest materials with a close structural relationship to gas hydrates. Here we utilize this inherent structural relationship to derive a new class of porous semiconductor materials: noble gas filled Group 14 clathrates (Ng_x[M₁₃₆], Ng=Ar, Kr, Xe and M=Si, Ge, Sn). We have carried out high‐level quantum chemical studies using periodic Local‐MP2 (LMP2) and dispersion‐corrected density functional methods (DFT‐B3LYP‐D3) to properly describe the dispersive host–guest interactions. The adsorption of noble gas atoms within clathrate‐II framework turned out to be energetically clearly favorable for several host–guest systems. For the energetically most favorable noble gas filled clathrate, Xe₂₄[Sn₁₃₆], the adsorption energy is ?52 kJ mol^?1 per guest atom at the LMP2/TZVPP level of theory, corresponding to ?9.2 kJ mol^?1 per framework Sn atom. Considering that a hypothetical guest‐free Sn clathrate‐II host framework is only 2.6 kJ mol^?1 per Sn atom less stable than diamond‐like α‐Sn, the stabilization resulting from the noble gas adsorption is very significant.     

Disposable Amperometric Immunosensor for the Determination of the E‐Cadherin Tumor Suppressor Protein in Cancer Cells and Human Tissues

This paper describes the results obtained in the development of the first electrochemical immunosensor described to date for the detection of E‐cadherin (E‐cad) protein, a relevant biomarker of prognosis and metastasis in cancer, based on the use of magnetic microcarriers (MBs) and amperometric transduction at screen‐printed carbon electrodes (SPCEs). Thus, the determination of E‐cad protein involved the use of two specific antibodies against this protein (one of them labelled with HRP) in a sandwich configuration onto HOOC‐MBs. The magnetic bioconjugates were captured onto SPCEs and the amperometric transduction was performed using the H₂O₂/hydroquinone (HQ) system. Under optimal conditions, this bioplatform demonstrated a wide linear concentration range (0.50–25 ng mL^?1) and a detection limit as low as 0.16 ng mL^?1, well below the optimal cut‐off level for the E‐cad protein (defined as 10,000 ng mL^?1 for soluble E‐cad levels in serum). The developed sensor also showed a good reproducibility among measurements with seven different sensors constructed in the same manner (RSD, 5.4 %), stability for more than 15 days and good specificity towards other proteins commonly found on biological samples. The applicability of this simple handling bioplatform for the direct determination of this protein in cell lysates with different metastatic potential and extracts from paraffined‐embedded human colorectal cancer tissues of different grade were also demonstrated.