Palladium-catalyzed direct allylation of fluorinated benzothiadiazoles with allyl chlorides

A palladium catalyzed cross-coupling of fluorinated benzothiadiazoles (FBTs) with allyl chlorides is reported. The significant feature of this method is synthetic simplicity, providing a straightforward access to unsymmetrical and symmetrical alkylated FBT derivatives that are of interest in organic electronic and optoelectronic materials.     

Facile synthesis of fluorine-substituted benzothiadiazole-based organic semiconductors and their use in solution-processed small-molecule organic solar cells

A facile new protocol for the synthesis of iodinated derivatives of fluorinated benzothiadiazoles is demonstrated for the production of p-type semiconducting materials. The newly synthesized small-molecule compounds bis[TPA-diTh]-MonoF-BT and bis[TPA-diTh]-DiF-BT exhibited a power conversion efficiency of 2.95?% and a high open-circuit voltage of 0.85?V in solution-processed small-molecule organic solar cells.     

Synthesis of photocrosslinkable fluorinated polydimethylsiloxanes: Direct introduction of acrylic pendant groups via hydrosilylation

The synthesis of photocrosslinkable fluorinated polydimethylsiloxanes was achieved through direct hydrosilylation with copoly(dimethyl)(methyl‐hydrogen) siloxane. First, the hydrosilylation of a fluorinated olefin allowed the introduction of a fluorinated group onto the polysiloxane. Then, a second hydrosilylation of allyl methyl methacrylate led to the polysiloxane bearing both fluorinated and photocrosslinkable groups. This method, compared with a previous method of copolycondensation, is shown to be easier and more efficient. All the new products synthesized were characterized by IR, ¹H NMR, ¹⁹F NMR, and ²⁹Si NMR. A formulation containing the fluorosilicone was crosslinked after being coated on a mesoporous membrane and was evaluated as a vapor permeation membrane. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3722–3728, 2000     

Design,Synthesis, and Self‐Assembly Behavior of Liquid‐Crystalline Bis‐[60]Fullerodendrimers

Bis‐[60]fullerodendrimers were synthesized by assembling [60]fullerene‐containing type I (terminal olefin) and type II (α,β‐unsaturated carbonyl olefin) olefins through the olefin cross‐metathesis reaction. The synthetic modular approach developed in this study allowed the preparation of mono‐[60]fullerodendrimers and their [60]fullerene‐free analogues. First‐ and second‐generation poly(aryl ester) dendrons carrying cyanobiphenyl mesogens were used as liquid‐crystalline promoters. The liquid‐crystalline properties were studied by polarized optical microscopy, differential scanning calorimetry, and small‐angle X‐ray scattering. In agreement with the nature and structure of the dendrimers, nematic, smectic, and multisegregated lamellar phases were observed. Owing to its versatility and tolerance towards many functional groups, olefin cross‐metathesis proved to be a reaction of choice for the elaboration of molecular materials with complex architectures.     

The doping effect of fluorinated aromatic solvents on the rate of ruthenium-catalysed olefin metathesis

A study concerning the effect of using a fluorinated aromatic solvent as the medium for olefin metathesis reactions catalysed by ruthenium complexes bearing N-heterocyclic carbene ligands is presented. The use of fluorinated aromatic hydrocarbons (FAH) as solvents for olefin metathesis reactions catalysed by standard commercially available ruthenium pre-catalysts allows substantially higher yields of the desired products to be obtained, especially in the case of demanding polyfunctional molecules, including natural and biologically active compounds. Interactions between the FAH and the second-generation ruthenium catalysts, which apparently improve the efficiency of the olefin metathesis transformation, have been studied by X-ray structure analysis and computations, as well as by carrying out a number of metathesis experiments. The optimisation of reaction conditions by using an FAH can be regarded as a complementary approach for the design of new improved ruthenium catalysts. Fluorinated aromatic solvents are an attractive alternative medium for promoting challenging olefin metathesis reactions.     

AgF‐Mediated Fluorinative Cross‐Coupling of Two Olefins: Facile Access to α‐CF3 Alkenes and β‐CF3 Ketones

A AgF‐mediated fluorination with a concomitant cross‐coupling between a gem‐difluoroolefin and a non‐fluorinated olefin is reported. This highly efficient method provides facile access to both α‐CF₃ alkenes and β‐CF₃ ketones, which otherwise remain challenging to be directly prepared. The application of this method is further demonstrated by the synthesis of bioactive isoxazoline derivatives. This approach represents a conceptually novel route to trifluoromethylated compounds that combines the in situ generation of the CF₃ moiety and a C? H functionalization in a single reaction system.     

Expanding Radical SAM Chemistry by Using Radical Addition Reactions and SAM Analogues

Radical S‐adenosyl‐l ‐methionine (SAM) enzymes utilize a [4Fe‐4S] cluster to bind SAM and reductively cleave its carbon–sulfur bond to produce a highly reactive 5′‐deoxyadenosyl (dAdo) radical. In almost all cases, the dAdo radical abstracts a hydrogen atom from the substrates or from enzymes, thereby initiating a highly diverse array of reactions. Herein, we report a change of the dAdo radical‐based chemistry from hydrogen abstraction to radical addition in the reaction of the radical SAM enzyme NosL. This change was achieved by using a substrate analogue containing an olefin moiety. We also showed that two SAM analogues containing different nucleoside functionalities initiate the radical‐based reactions with high efficiencies. The radical adduct with the olefin produced in the reaction was found to undergo two divergent reactions, and the mechanistic insights into this process were investigated in detail. Our study demonstrates a promising strategy in expanding radical SAM chemistry, providing an effective way to access nucleoside‐containing compounds by using radical SAM‐dependent reactions.     

Formation of C(sp3)–C(sp3) Bonds through Nickel‐Catalyzed Decarboxylative Olefin Hydroalkylation Reactions

Olefins and carboxylic acids are among the most important feedstock compounds. They are commonly found in natural products and drug molecules. We report a new reaction of nickel‐catalyzed decarboxylative olefin hydroalkylation, which provides a novel practical strategy for the construction of C(sp³)?C(sp³) bonds. This reaction can tolerate a variety of synthetically relevant functional groups and shows good chemo‐ and regioselectivity. It enables cross‐coupling of complex organic molecules containing olefin groups and carboxylic acid groups in a convergent fashion.     

Photocyclodehydrofluorination

Mallory‐type photocyclization involves a series of photoreactions of stilbenes, o‐terphenyls and related derivatives, which undergo intramolecular cyclization via dihydrophenanthrene intermediates. In typical Mallory photocyclizations, oxidants are usually needed to produce the final phenanthrene‐containing product. In the research described here, appropriately fluorinated stilbenes and o‐terphenyls undergo ring closure and HF is eliminated. This photocyclodehydrofluorination (PCDHF) reaction is very useful to produce a wide range of selectively fluorinated polynuclear aromatic hydrocarbons that possess a phenanthrene (or heterocyclic analogue of phenanthrene) substructure. These fluorinated products are of great interest in various aspects of the materials science.     

Synthesis of fluorine‐containing star‐shaped poly(vinyl ether)s via arm‐linking reactions in living cationic polymerization

Various types of fluorine‐containing star‐shaped poly(vinyl ether)s were successfully synthesized by crosslinking reactions of living polymers based on living cationic polymerization. Star polymers with fluorinated arm chains were prepared by the reaction between a divinyl ether and living poly(vinyl ether)s with fluorine groups (C₄F₉, C₆F₁₃, and C₈F₁₇) at the side chain using cationogen/Et_1.5AlCl_1.5 in a fluorinated solvent (dichloropentafluoropropanes), giving star‐shaped fluorinated polymers in high yields with a relatively narrow molecular weight distribution. The concentration of living polymers for the crosslinking reaction and the molar feed ratio of a bifunctional vinyl ether to living polymers affected the yield and molecular weight of the star polymers. Star polymers with block arms were prepared by a linking reaction of living block copolymers of a fluorinated segment and a nonfluorinated segment. Heteroarm star‐shaped polymers containing two‐ or three‐arm species were synthesized using a mixture of different living polymer species for the reaction with a bifunctional vinyl ether. The obtained polymers underwent temperature‐induced solubility transitions in various organic solvents, and their concentrated solutions underwent sol–gel transitions, based on the solubility transition of a thermoresponsive fluorinated segment. Furthermore, a slight amount of fluorine groups were shown to be effective for physical gelation when those were located at the arm ends of a star polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Hydrosilation in Supercritical CO2: Synthesis of Fluorinated Polysiloxanes

Hydrosilation of poly(methylhydrosiloxane) with a fluorinated olefin in supercritical CO₂ (scCO₂) using Karstedt's Pt catalyst has been successfully demonstrated; results were compared with those obtained in a subcritical conventional solvent, i.e. toluene. Rates of hydrosilation were found to be dependent on solvent, reactant concentration, and reaction temperature. Levels of hydrosilation were 40–50%, depending on reaction conditions. Gel formation, which was not observed under any conditions in subcritical toluene, occurred in all reactions done in scCO₂ and accounted for up to 20 wt.‐% of the final product mix.     

One‐Pot Preparation of Fluorinated α‐Aminoalkyl Phosphonates under Microwave Irradiation and Solvent‐Free Conditions

A facile one‐pot method has been developed for the synthesis of fluorine‐containing α‐amino phosphonates in good yields by a three‐component reaction of fluorinated aromatic aldehydes, anilines, and diethyl phosphate in the presence of a silica‐gel support under microwave irradiation within 10 min. All new compounds are fully characterized by spectral methods and elemental analysis.     

Synthesis and surface properties of fluorinated block copolymers containing sulfonic groups

A series of fluorinated block copolymers with different fluorinated block lengths and compositions were synthesized by atom transfer radical polymerization (ATRP), and then the block copolymers containing sulfonic groups with various sulfonation levels were successfully prepared further via a sulfonation reaction. These well‐defined block copolymers were characterized by means of Fourier transform infrared (FTIR), ¹H‐nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC). The surface activities of the fluorinated block copolymers containing sulfonic groups in N‐methyl pyrrolidone solution and the surface properties of the films prepared from such a solution were examined, and the experimental results showed that the fluorinated block copolymers exhibited a high surface activity in solution and quite a low solid surface energy of films, even though they contain hydrophilic sulfonic groups. The critical surface tensions of these copolymers were estimated and were comparable to that of polytetrafluoroethylene. Even more interestingly, the surface activities of the block copolymers containing sulfonic groups or sodium sulfonate groups in aqueous solution were also measured. It was found that the surface activity in aqueous solution was weaker than that in N‐methyl pyrrolidone solution and depended on both the length of the fluorinated block and the sulfonation level of the block copolymers. The surface properties of the films prepared from the block copolymers in aqueous solution were tested, and most of these films exhibited a hydrophilic surface property. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4809–4819, 2004     

Assembly of Fluorinated Quaternary Stereogenic Centers through Catalytic Enantioselective Detrifluoroacetylative Aldol Reactions

A Cu‐catalyzed asymmetric detrifluoroacetylative aldol addition reaction of 2‐fluoro‐1,3‐diketones/hydrates to aldehydes in the presence of base and chiral bidentate ligand was developed. The reaction was carried out under convenient conditions and tolerated a wide range of substrates, resulting in fluorinated quaternary stereogenic α‐fluoro‐β‐hydroxy ketone products with good chemical yields, diastereo‐ and enantioselectivities. This catalytic asymmetric detrifluoroacetylative aldol addition reaction provides a new approach for the preparation of biologically relevant products containing C? F quaternary stereogenic centers.     

Miscibility and surface properties of fluorinated copolymer blends involving hydrogen‐bonding interactions

The miscibility and underlying hydrogen‐bonding interactions of blends of a fluorinated copolymer containing pyridine and a nonfluorinated copolymer containing methacrylic acid were studied with differential scanning calorimetry (DSC), transmission Fourier transform infrared (TX‐FTIR) spectroscopy, and X‐ray photoelectron spectroscopy (XPS), whereas the surface properties of the blends were investigated with contact‐angle measurements, time‐of‐flight secondary‐ion mass spectroscopy, XPS, and attenuated total reflectance Fourier transform infrared spectroscopy. DSC studies showed that the presence of a sufficient amount of 4‐vinylpyridine units in the fluorinated copolymer produced miscible blends with the nonfluorinated copolymer containing methacrylic acid. TX‐FTIR and XPS showed the existence of pyridine–acid interpolymer hydrogen‐bonding interactions. Even though the anchoring effect of hydrogen bonding hindered the migration of the fluorinated component to the blend surface, it could not completely eliminate the surface enrichment of the fluorinated component and the surface rearrangement of the fluorinated pendant chain. The air–blend interface was mainly occupied by the fluorinated pendant chain, and the surface energies of the blends were extremely low, even with only 1.5 wt % of the fluorinated component in the blends. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1145–1154, 2004     

Asymmetric synthesis of fluorinated cyclic beta-amino acid derivatives through cross metathesis

The asymmetric synthesis of several fluorinated cis-2-aminocycloalkane carboxylic acids (cis-2-ACACs) with a cross metathesis (CM) reaction as the key step has been carried out, constituting the first time a metathesis protocol has been undertaken with fluorinated imidoyl chlorides. Subsequent chemoselective hydrogenation of the olefin moiety, Dieckmann condensation, and stereoselective reduction of the iminic double bond afforded the corresponding beta-amino esters with several ring sizes. The asymmetric version of the process was achieved by using (-)-8-phenylmenthol as a chiral auxiliary.     

Synthesis and applications of novel fluoroalkyl end‐capped cooligomers containing diphenylacetylene segments: a new approach to the surface arrangement of diphenylacetylene segments on the traditional organic polymer

Fluoroalkyl end‐capped cooligomers containing diphenylacetylene segments [R_F‐(DPMA)_x‐(Co‐M)_y‐R_F] were prepared by reaction of fluoroalkanoyl peroxide with 4‐(phenylethynyl)phenyl methacrylate (DPMA) and radical polymerizable comonomers such as N,N‐dimethylacrylamide (DMAA) and acryloylmorpholine (ACMO) under very mild conditions. Fluorinated cooligomers containing diphenylacetylene segments thus obtained exhibited a good solubility in a variety of organic solvents. These fluorinated cooligomers were also applied to the surface modification of traditional organic polymers such as poly(methyl methacrylate) (PMMA) to exhibit not only a good surface active property imparted by fluorine but also a fluorescent characteristic related to diphenylacetylene segments on their surface. In addition, these fluorinated cooligomers could form the nanometer size‐controlled fluorinated molecular aggregates in chloroform. Interestingly, some benzenes and biphenyl (BP) derivatives could interact with these fluorinated oligomeric aggregates as guest molecules, and in particular 2‐chloro‐5‐nitrobenzotrifluoride (CNB) was most effective for enhancing the fluorescent intensity of these guest molecules. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and biological evaluation of new bicyclic fluorinated uracils through ring-closing metathesis

Two families of bicyclic fluorinated uracils have been prepared starting from a gem-difluorinated unsaturated nitrile, by means of a ring-closing metathesis reaction to form the new ring, which is fused at the C-5/C-6 or N-1/C-6 positions of the uracil moiety. The selective formation of olefin regioisomers in the metathesis process can be controlled according to the reaction conditions (catalyst, solvent, and temperature). The acaricidal activities of the resulting compounds have also been investigated.     

One‐pot synthesis of polyfluoroterphenyls via palladium‐catalyzed Suzuki–Miyaura coupling of chlorobromobenzene and CH bond functionalization of perfluoroarenes

An efficient tandem route for the synthesis of polyfluoroterphenyl derivatives has been developed. The target compounds were obtained in moderate to good yields by a Pd(OAc)₂‐catalyzed three‐component coupling reaction involving palladium‐catalyzed direct C? H activation of perfluoroarenes. This in turn will set the stage for a wide application of this useful reaction for the synthesis of fluorinated liquid crystal compounds containing the privileged polyfluoroterphenyl structure. Copyright © 2014 John Wiley & Sons, Ltd.     

New sensitive fluorophores for selective DNA detection

4,7-Disubstituted benzothiadiazoles containing 1-arylethynyl and 4-methoxyphenyl groups are selective photoluminescent "light up" probes to duplex DNA with unprecedented sensibility in both spectrophotometric and spectrofluorimetric measurements.