Ions Can Move a Proton‐Coupled Electron‐Transfer Reaction into Tunneling Regime

The effects of charged species on proton‐coupled electron‐transfer (PCET) reaction should be of significance for understanding/application of important chemical and biological PCET systems. Such species can be found in proximity of activated complex in a PCET reaction, although they are not involved in the charge transfer process. Reported here is the first study of the above‐mentioned effects. Here, the effects of Na⁺, K⁺, Li⁺, Ca²⁺, Mg²⁺, and Me₄N⁺ observed in PCET reaction of ascorbate monoanions with hexacyanoferrate(III) ions in H₂O reveal that, in presence of ions, this over‐the‐barrier reaction entered into tunneling regime. The observations are: a) dependence of the rate constant on the cation concentration, where the rate constant is 71 (at I = 0.0023), and 821 (at 0.5M K⁺), 847 (at 1.0M Na⁺), and 438 M ^?1 s^?1 (at 0.011M Ca²⁺); b) changes of kinetic isotope effect (KIE) in the presence of ions, where k_H/k_D=4.6 (at I = 0.0023), and 3.4 (in the presence of 0.5M K⁺), 3.3 (at 1.0M Na⁺), 3.9 (at 0.001M Ca²⁺), and 3.9 (at 0.001M Mg²⁺), respectively; c) the isotope effects on Arrhenius pre‐factor where A_H/A_D=0.97 (0.15) in absence of ions, and 2.29 (0.60) (at 0.5M Na⁺), 1.77 (0.29) (at 1.0M Na⁺), 1.61 (0.25) (at 0.5M K⁺), 0.42 (0.16) (at 0.001M Ca²⁺) and 0.16 (0.19) (at 0.001M Mg²⁺); d) isotope differences in the enthalpies of activation in H₂O and in D₂O, where ΔΔH^?(D,H)=3.9 (0.4) kJ mol^?1 in the absence of cations, 1.3 (0.6) at 0.5M Na⁺, 1.8 (0.4) at 0.5M K⁺, 1.5 (0.4) at 1.0M Na⁺, 5.5 (0.9) (at 0.001M Ca²⁺), and 7.9 (2.8) (at 0.001M Mg²⁺) kJ mol^?1; e) nonlinear proton inventory in reaction. In the H₂O/dioxane 1 : 1, the observed KIE is 7.8 and 4.4 in the absence and in the presence of 0.1M K⁺, respectively, and A_H/A_D=0.14 (0.03). The changes when cations are present in the reaction are explained in terms of termolecular encounter complex consisting of redox partners, and the cation where the cation can be found in a near proximity of the reaction‐activated complex thus influencing the proton/electron double tunneling event in the PCET process. A molecule of H₂O is involved in the transition state. The resulting ‘configuration’ is more ‘rigid’ and more appropriate for efficient tunneling with Na⁺ or K⁺ (extensive tunneling observed), i.e., there is more precise organized H transfer coordinate than in the case of Ca²⁺ and Mg²⁺ (moderate tunneling observed) in the reaction.     

Synthesis,structural and chemosensitivity studies of arene d6 metal complexes having N‐phenyl‐N´‐(pyridyl/pyrimidyl)thiourea derivatives

The d⁶ metal complexes of thiourea derivatives were synthesized to investigate its cytotoxicity. Treatment of various N‐phenyl‐N´ pyridyl/pyrimidyl thiourea ligands with half‐sandwich d⁶ metal precursors yielded a series of cationic complexes. Reactions of ligand (L1‐L3) with [(p‐cymene)RuCl₂]₂ and [Cp*MCl₂]₂ (M = Rh/Ir) led to the formation of a series of cationic complexes bearing general formula [(arene)M(L1)к²_(N,S)Cl]⁺, [(arene)M(L2)к²_(N,S)Cl]⁺ and [(arene)M(L3)к²_(N,S)Cl]⁺ [arene = p‐cymene, M = Ru ( 1 , 4 , 7 ); Cp*, M = Rh ( 2 , 5 , 8 ); Cp*, Ir ( 3 , 6 , 9 )]. These compounds were isolated as their chloride salts. X‐ray crystallographic studies of the complexes revealed the coordination of the ligands to the metal in a bidentate chelating N,S‐ manner. Further the cytotoxicity studies of the thiourea derivatives and its complexes evaluated against HCT‐116 (human colorectal cancer), MIA‐PaCa‐2 (human pancreatic cancer) and ARPE‐19 (non‐cancer retinal epithelium) cancer cell lines showed that the thiourea ligands displayed no activity. Upon complexation however, the metal compounds possesses cytotoxicity and whilst potency is less than cisplatin, several complexes exhibited greater selectivity for HCT‐116 or MIA‐PaCa‐2 cells compared to ARPE‐19 cells than cisplatin in vitro. Rhodium complexes of thiourea derivatives were found to be more potent as compared to ruthenium and iridium complexes.     

High‐Speed Living Polymerization of Polar Vinyl Monomers by Self‐Healing Silylium Catalysts

This contribution describes the development and demonstration of the ambient‐temperature, high‐speed living polymerization of polar vinyl monomers (M) with a low silylium catalyst loading (≤ 0.05 mol % relative to M). The catalyst is generated in situ by protonation of a trialkylsilyl ketene acetal (^RSKA) initiator (I) with a strong Brønsted acid. The living character of the polymerization system has been demonstrated by several key lines of evidence, including the observed linear growth of the chain length as a function of monomer conversion at a given [M]/[I] ratio, near‐precise polymer number‐average molecular weight (M_n, controlled by the [M]/[I] ratio) with narrow molecular weight distributions (MWD), absence of an induction period and chain‐termination reactions (as revealed by kinetics), readily achievable chain extension, and the successful synthesis of well‐defined block copolymers. Fundamental steps of activation, initiation, propagation, and catalyst “self‐repair” involved in this living polymerization system have been elucidated, chiefly featuring a propagation “catalysis” cycle consisting of a rate‐limiting C? C bond formation step and fast release of the silylium catalyst to the incoming monomer. Effects of acid activator, catalyst and monomer structure, and reaction temperature on polymerization characteristics have also been examined. Among the three strong acids incorporating a weakly coordinating borate or a chiral disulfonimide anion, the oxonium acid [H(Et₂O)₂]⁺[B(C₆F₅)₄]^? is the most effective activator, which spontaneously delivers the most active R₃Si⁺, reaching a high catalyst turn‐over frequency (TOF) of 6.0×10³ h^?1 for methyl methacrylate polymerization by Me₃Si⁺ or an exceptionally high TOF of 2.4×10⁵ h^?1 for n‐butyl acrylate polymerization by iBu₃Si⁺, in addition to its high (>90 %) to quantitative efficiencies and a high degree of control over M_n and MWD (1.07–1.12). An intriguing catalyst “self‐repair” feature has also been demonstrated for the current living polymerization system.     

Three‐Way Cooperativity in d8 Metal Complexes with Ligands Displaying Chemical and Redox Non‐Innocence

Reversible proton‐ and electron‐transfer steps are crucial for various chemical transformations. The electron‐reservoir behavior of redox non‐innocent ligands and the proton‐reservoir behavior of chemically non‐innocent ligands can be cooperatively utilized for substrate bond activation. Although site‐decoupled proton‐ and electron‐transfer steps are often found in enzymatic systems, generating model metal complexes with these properties remains challenging. To tackle this issue, we present herein complexes [(cod_?H)M(μ‐L^2?) M (cod_?H)] (M=Pt^II, [ 1 ] or Pd^II, [ 2 ], cod=1,5‐cyclooctadiene, H₂L=2,5‐di‐[2,6‐(diisopropyl)anilino]‐1,4‐benzoquinone), in which cod acts as a proton reservoir, and L^2? as an electron reservoir. Protonation of [ 2 ] leads to an unusual tetranuclear complex. However, [ 1 ] can be stepwise reversibly protonated with up to two protons on the cod_?H ligands, and the protonated forms can be stepwise reversibly reduced with up to two electrons on the L^2? ligand. The doubly protonated form of [ 1 ] is also shown to react with OMe^? leading to an activation of the cod ligands. The site‐decoupled proton and electron reservoir sources work in tandem in a three‐way cooperative process that results in the transfer of two electrons and two protons to a substrate leading to its double reduction and protonation. These results will possibly provide new insights into developing catalysts for multiple proton‐ and electron‐transfer reactions by using metal complexes of non‐innocent ligands.     

On the Gas‐Phase Reactivity of Complexed OH+ with Halogenated Alkanes

OH⁺ is an extraordinarily strong oxidant. Complexed forms (L? OH⁺), such as H₂OOH⁺, H₃NOH⁺, or iron–porphyrin‐OH⁺ are the anticipated oxidants in many chemical reactions. While these molecules are typically not stable in solution, their isolation can be achieved in the gas phase. We report a systematic survey of the influence on L on the reactivity of L? OH⁺ towards alkanes and halogenated alkanes, showing the tremendous influence of L on the reactivity of L? OH⁺. With the help of with quantum chemical calculations, detailed mechanistic insights on these very general reactions are gained. The gas‐phase pseudo‐first‐order reaction rates of H₂OOH⁺, H₃NOH⁺, and protonated 4‐picoline‐N‐oxide towards isobutane and different halogenated alkanes C_nH_2n+1Cl (n=1–4), HCF₃, CF₄, and CF₂Cl₂ have been determined by means of Fourier transform ion cyclotron resonance meaurements. Reaction rates for H₂OOH⁺ are generally fast (7.2×10^?10–3.0×10^?9 cm³ mol^?1 s^?1) and only in the cases HCF₃ and CF₄ no reactivity is observed. In contrast to this H₃NOH⁺ only reacts with tC₄H₉Cl (k_obs=9.2×10^?10), while 4‐CH₃‐C₅H₄N‐OH⁺ is completely unreactive. While H₂OOH⁺ oxidizes alkanes by an initial hydride abstraction upon formation of a carbocation, it reacts with halogenated alkanes at the chlorine atom. Two mechanistic scenarios, namely oxidation at the halogen atom or proton transfer are found. Accurate proton affinities for HOOH, NH₂OH, a series of alkanes C_nH_2n+2 (n=1–4), and halogenated alkanes C_nH_2n+1Cl (n=1–4), HCF₃, CF₄, and CF₂Cl₂, were calculated by using the G3 method and are in excellent agreement with experimental values, where available. The G3 enthalpies of reaction are also consistent with the observed products. The tendency for oxidation of alkanes by hydride abstraction is expressed in terms of G3 hydride affinities of the corresponding cationic products C_nH_2n+1⁺ (n=1–4) and C_nH_2nCl⁺ (n=1–4). The hypersurface for the reaction of H₂OOH⁺ with CH₃Cl and C₂H₅Cl was calculated at the B3 LYP, MP2, and G3_m* level, underlining the three mechanistic scenarios in which the reaction is either induced by oxidation at the hydrogen or the halogen atom, or by proton transfer.     

Ion‐Pair SN2 Reaction of OH− and CH3Cl: Activation Strain Analyses of Counterion and Solvent Effects

We have theoretically studied the non‐identity S_N2 reactions of M_nOH^(n?1)+CH₃Cl (M⁺=Li⁺, Na⁺, K⁺, and MgCl⁺; n=0, 1) in the gas phase and in THF solution at the OLYP/6‐31++G(d,p) level using polarizable continuum model (PCM) implicit solvation. We want to explore and understand the effect of the metal counterion M⁺ and solvation on the reaction profile and the stereoselectivity of these processes. To this end, we have explored the potential energy surfaces of the backside (S_N2‐b) and frontside (S_N2‐f) pathways. To explain the computed trends, we have carried out analyses with an extended activation strain model (ASM) of chemical reactivity that includes the treatment of solvation effects.     

Breaking and Making of Carbon–Carbon Bonds by Lanthanides and Third‐Row Transition Metals

Carbon‐atom extrusion from the ipso‐position of a halobenzene ring (C₆H₅X; X=F, Cl, Br, I) and its coupling with a methylene ligand to produce acetylene is not confined to [LaCH₂]⁺; also, the third‐row transition‐metal complexes [MCH₂]⁺, M=Hf, Ta, W, Re, and Os, bring about this unusual transformation. However, substrates with substituents X=CN, NO₂, OCH₃, and CF₃ are either not reactive at all or give rise to different products when reacted with [LaCH₂]⁺. In the thermal gas‐phase processes of atomic Ln⁺ with C₇H₇Cl substrates, only those lanthanides with a promotion energy small enough to attain a 4fⁿ5d¹6s¹ configuration are reactive and form both [LnCl]⁺ and [LnC₅H₅Cl]⁺. Branching ratios and the reaction efficiencies of the various processes seem to correlate with molecular properties, like the bond‐dissociation energies of the C?X or M⁺?X bonds or the promotion energies of lanthanides.     

Discrete Divalent Rare‐Earth Cationic ROP Catalysts: Ligand‐Dependent Redox Behavior and Discrepancies with Alkaline‐Earth Analogues in a Ligand‐Assisted Activated Monomer Mechanism

The first solvent‐free cationic complexes of the divalent rare‐earth metals, [{RO}RE^II]⁺[A]^? (RE^II=Yb^II, 1 ; Eu^II, 2 ) and [{LO}RE^II]⁺[A]^? ([A]^?=[H₂N{B(C₆F₅)₃}₂]^?; RE^II=Yb^II, 3 ; Eu^II, 4 ), have been prepared by using highly chelating monoanionic aminoether‐fluoroalkoxide ({RO}^?) and aminoether‐phenolate ({LO}^?) ligands. Complexes 1 and 2 are structurally related to their alkaline‐earth analogues [{RO}AE]⁺[A]^? (AE=Ca, 5 ; Sr, 6 ). Yet, the two families behave very differently during catalysis of the ring‐opening polymerization (ROP) of L ‐lactide (L ‐LA) and trimethylene carbonate (TMC) performed under immortal conditions with excess BnOH as an exogenous chain‐transfer agent. The ligand was found to strongly influence the behavior of the RE^II complexes during ROP catalysis. The fluoroalkoxide RE^II catalysts 1 and 2 are not oxidized under ROP conditions, and compare very favorably with their Ca and Sr congeners 5 and 6 in terms of activity (turnover frequency (TOF) in the range 200–400 mol_L‐LA (mol_Eu h^?1)) and control over the parameters during the immortal ROP of L ‐LA (M_n,theor≈M_n,SEC, M_w/M_n<1.05). The Eu^II‐phenolate 4 provided one of the most effective ROP cationic systems known to date for L ‐LA polymerization, exhibiting high activity (TOF up to 1 880 mol_L‐LA?(mol_Eu h)^?1) and good control (M_w/M_n=1.05). By contrast, upon addition of L ‐LA the Yb^II‐phenolate 3 immediately oxidizes to inactive RE^III species. Yet, the cyclic carbonate TMC was rapidly polymerized by combinations of 3 (or even 1 ) and BnOH, revealing excellent activities (TOF=5000–7000 mol_TMC?(mol_Eu h)^?1) and unusually high control (M_n,theor≈M_n,SEC, M_w/M_n<1.09); under identical conditions, the calcium derivative 5 was entirely inert toward TMC. Based on experimental and kinetic data, a new ligand‐assisted activated monomer ROP mechanism is suggested, in which the so‐called ancillary ligand plays a crucial role in the catalytic cycle. A coherent reaction pathway computed by DFT, compatible with the experimental data, supports the proposed scenario.     

Heterostructured Inter‐Doped Ruthenium–Cobalt Oxide Hollow Nanosheet Arrays for Highly Efficient Overall Water Splitting

The development of transition‐metal‐oxides (TMOs)‐based bifunctional catalysts toward efficient overall water splitting through delicate control of composition and structure is a challenging task. Herein, the rational design and controllable fabrication of unique heterostructured inter‐doped ruthenium–cobalt oxide [(Ru–Co)O_x] hollow nanosheet arrays on carbon cloth is reported. Benefiting from the desirable compositional and structural advantages of more exposed active sites, optimized electronic structure, and interfacial synergy effect, the (Ru–Co)O_x nanoarrays exhibited outstanding performance as a bifunctional catalyst. Particularly, the catalyst showed a remarkable hydrogen evolution reaction (HER) activity with an overpotential of 44.1 mV at 10 mA cm^?2 and a small Tafel slope of 23.5 mV dec^?1, as well as an excellent oxygen evolution reaction (OER) activity with an overpotential of 171.2 mV at 10 mA cm^?2. As a result, a very low cell voltage of 1.488 V was needed at 10 mA cm^?2 for alkaline overall water splitting.     

Bio‐Inspired Transition Metal–Organic Hydride Conjugates for Catalysis of Transfer Hydrogenation: Experiment and Theory

Taking inspiration from yeast alcohol dehydrogenase (yADH), a benzimidazolium (BI⁺) organic hydride‐acceptor domain has been coupled with a 1,10‐phenanthroline (phen) metal‐binding domain to afford a novel multifunctional ligand ( L ^BI+) with hydride‐carrier capacity ( L ^BI++H^?? L ^BIH). Complexes of the type [Cp*M( L ^BI)Cl][PF₆]₂ (M=Rh, Ir) have been made and fully characterised by cyclic voltammetry, UV/Vis spectroelectrochemistry, and, for the Ir^III congener, X‐ray crystallography. [Cp*Rh( L ^BI)Cl][PF₆]₂ catalyses the transfer hydrogenation of imines by formate ion in very goods yield under conditions where the corresponding [Cp*Ir( L ^BI)Cl][PF₆] and [Cp*M(phen)Cl][PF₆] (M=Rh, Ir) complexes are almost inert as catalysts. Possible alternatives for the catalysis pathway are canvassed, and the free energies of intermediates and transition states determined by DFT calculations. The DFT study supports a mechanism involving formate‐driven Rh?H formation (90 kJ mol^?1 free‐energy barrier), transfer of hydride between the Rh and BI⁺ centres to generate a tethered benzimidazoline (BIH) hydride donor, binding of imine substrate at Rh, back‐transfer of hydride from the BIH organic hydride donor to the Rh‐activated imine substrate (89 kJ mol^?1 barrier), and exergonic protonation of the metal‐bound amide by formic acid with release of amine product to close the catalytic cycle. Parallels with the mechanism of biological hydride transfer in yADH are discussed.     

Phase‐Transfer Activation of Transition Metal Catalysts

With metal‐based catalysts, it is quite common that a ligand (L) must first dissociate from a catalyst precursor (L′_nM?L) to activate the catalyst. The resulting coordinatively unsaturated active species (L′_nM) can either back react with the ligand in a k_?1 step, or combine with the substrate in a k₂ step. When dissociation is not rate determining and k_?1[L] is greater than or comparable to k₂[substrate], this slows the rate of reaction. By introducing a phase label onto the ligand L and providing a suitable orthogonal liquid or solid phase, dramatic rate accelerations can be achieved. This phenomenon is termed “phase‐transfer activation”. In this Concept, some historical antecedents are reviewed, followed by successful applications involving fluorous/organic and aqueous/organic liquid/liquid biphasic catalysis, and liquid/solid biphasic catalysis. Variants that include a chemical trap for the phase‐labeled ligands are also described.     

Ultra‐small sugar‐substituted N‐heterocyclic carbene‐protected palladium nanoparticles and catalytic activity

Ultra‐small Pd nanoparticles (UNPs) represent a distinctive type of nanomaterial making them very attractive for a range of applications. Herein, chiral sugar‐substituted N‐heterocyclic carbenes (NHCs) with various lengths of alkyl chain (sugar‐NHCs‐ⁿC_nH_2n+1) were first used to prepare water‐soluble Pd@NHCs‐sugar UNPs via an efficient ligand‐exchange strategy, which can be handled under air and are stable over 10 months. The Pd@NHCs‐sugar UNPs were highly monodisperse, with tunable core diameters from 1.7 to 2.1 nm, and an effect of the particle size on the N‐substituted aliphatic chains was observed. To investigate the accessibility of the surface, the Pd@NHCs‐sugar UNPs were studied as catalysts for C–C coupling reaction in eco‐friendly ethanol aqueous solution without any precipitation of metallic Pd. The presence of the longest aliphatic group in the Pd@NHCs‐sugar UNPs imparts to them the highest catalyst activity (turnover number and turnover frequency up to 196 000 and 3 920 000 h^?1).     

Significant Polar Comonomer Enchainment in Zirconium‐Catalyzed,Masking Reagent‐Free,Ethylene Copolymerizations

In principal, the direct copolymerization of ethylene with polar comonomers should be the most efficient means to introduce functional groups into conventional polyolefins but remains a formidable challenge. Despite the tremendous advances in group 4‐centered catalysis for olefin polymerization, successful examples of ethylene + polar monomer copolymerization are rare, especially without Lewis acidic masking reagents. Here we report that certain group 4 catalysts are very effective for ethylene + CH₂=CH(CH₂)_nNR₂ copolymerizations with activities up to 3400 Kg copolymer mol^?1‐Zr h^‐1 atm^‐1, and with comonomer enchainment up to 5.5 mol % in the absence of masking reagents. Group 4 catalyst‐amino‐olefin structure–activity‐selectivity relationships reflect the preference of olefin activation over free amine coordination, which is supported by mechanistic experiments and DFT analysis. These results illuminate poorly understood facets of d⁰ metal‐catalyzed polar olefin monomer copolymerization processes.     

Significant Polar Comonomer Enchainment in Zirconium‐Catalyzed,Masking Reagent‐Free,Ethylene Copolymerizations

In principal, the direct copolymerization of ethylene with polar comonomers should be the most efficient means to introduce functional groups into conventional polyolefins but remains a formidable challenge. Despite the tremendous advances in group 4‐centered catalysis for olefin polymerization, successful examples of ethylene + polar monomer copolymerization are rare, especially without Lewis acidic masking reagents. Here we report that certain group 4 catalysts are very effective for ethylene + CH₂=CH(CH₂)_nNR₂ copolymerizations with activities up to 3400 Kg copolymer mol^?1‐Zr h^‐1 atm^‐1, and with comonomer enchainment up to 5.5 mol % in the absence of masking reagents. Group 4 catalyst‐amino‐olefin structure–activity‐selectivity relationships reflect the preference of olefin activation over free amine coordination, which is supported by mechanistic experiments and DFT analysis. These results illuminate poorly understood facets of d⁰ metal‐catalyzed polar olefin monomer copolymerization processes.     

The Electrochemical Behavior of α‐Ketoglutarate at the Hanging Mercury Drop Electrode in Acidic Aqueous Solution and Its Practical Application in Environmental and Biological Samples

The voltammetric behavior of α‐ketoglutarate (α‐KG) at the hanging mercury drop electrode (HMDE) has been investigated in acetate buffer solution. Under the optimum experimental conditions (pH 4.5, 0.2 M NaAc‐HAc buffer solution), a sensitive reductive wave of α‐KG was obtained by linear scan voltammetry (LSV) and the peak potential was ?1.18 V (vs. SCE), which was an irreversible adsorption wave. The kinetic parameters of the electrode process were α=0.3 and k_s=0.72 1/s. There was a linear relationship between peak current i_{p, α‐KG} and α‐KG concentration in the range of 2×10^?6–8×10^?4 M α‐KG. The detection limit was 8×10^?7 M and the relative standard deviation was 2.0% (C_α‐KG=8×10^?4 M, n=10). Applications of the reductive wave of α‐KG for practical analysis were addressed as follows: (1) It can be used for the quantitative analysis of α‐KG in biological samples and the results agree well with those obtained from the established ultraviolet spectrophotometric method. (2) Utilizing the complexing effect between α‐KG and aluminum, a linear relationship holds between the decrease of peak current of α‐KG Δi_p and the added Al concentration Cequation/tex2gif-inf-5.gif in the range of 5.0×10^?6–2.5×10^?4 M. The detection limit was 2.2×10^?6 M and the relative standard deviation was 3.1% (Cequation/tex2gif-inf-6.gif=4×10^?5 M, n=10). It was successfully applied to the detection of aluminum in water and synthetic biological samples with satisfactory results, which were consistent with those of ICP‐AES. (3) It was also applied to study the effect of Al^III on the glutamate dehydrogenase (GDH) activity in the catalytically reaction of α‐KG+NH +NADH?L ‐glutamate+NAD⁺+H₂O by differential pulse polarography (DPP) technique. By monitoring DPP reductive currents of NAD⁺ and α‐KG, an elementary important result was found that Al could greatly affect the activity of GDH. This study could be attributed to intrinsic understanding of the aluminum's toxicity in enzyme reaction processes.     

Ionophores in Rubidium Ion‐Selective Membrane Electrodes

Binaphthyl‐based crown ethers incorporating anthraquinone, benzoquinone, and 1,4‐dimethoxybezene have been synthesized and tested for Rb⁺ selective ionophores in the poly(vinyl chloride) (PVC) membrane. The membrane containing NPOE gave a better Rb⁺ selectivity than those containing either DOA or BPPA as a plasticizer. The response was linear within the concentration range of 1.0×10^?5–1.0×10^?1 M and the slope was 54.7±0.5 mV/dec. The detection limit was determined to be 9.0×10^?6 M and the optimum pH range of the membrane was 6.0–9.0. The ISE membrane exhibits good selectivity for Rb⁺ over ammonium, alkali metal, and alkaline earth metal ions. Selectivity coefficients for the other metal ions, log K^Pot were ?2.5 for Li⁺, ?2.4 for Na⁺, ?2.0 for H⁺, ?1.0 for K⁺, ?1.2 for Cs⁺, ?1.6 for NH₄⁺, ?4.5 for Mg²⁺, ?5.0 for Ca²⁺,?4.9 for Ba²⁺. The lifetime of the membrane was about one month.     

Characterization of N‐Boc/Fmoc/Z‐N′‐formyl‐gem‐diaminoalkyl derivatives using electrospray ionization multi‐stage mass spectrometry

N‐Boc/Fmoc/Z‐N′‐formyl‐gem‐diaminoalkyl derivatives, intermediates particularly useful in the synthesis of partially modified retro‐inverso peptides, have been characterized by both positive and negative ion electrospray ionization (ESI) ion‐trap multi‐stage mass spectrometry (MSⁿ). The MS² collision induced dissociation (CID) spectra of the sodium adduct of the formamides derived from the corresponding N‐Fmoc/Z‐amino acids, dipeptide and tripeptide acids show the [M + Na‐NH₂CHO]⁺ ion, arising from the loss of formamide, as the base peak. Differently, the MS² CID spectra of [M + Na]⁺ ion of all the N‐Boc derivatives yield the abundant [M + Na‐C₄H₈]⁺ and [M + Na‐Boc + H]⁺ ions because of the loss of isobutylene and CO₂ from the Boc protecting function. Useful information on the type of amino acids and their sequence in the N‐protected dipeptidyl and tripeptidyl‐N′‐formamides is provided by MS² and subsequent MSⁿ experiments on the respective precursor ions. The negative ion ESI mass spectra of these oligomers show, in addition to [M‐H]^?, [M + HCOO]^? and [M + Cl]^? ions, the presence of in‐source CID fragment ions deriving from the involvement of the N‐protecting group. Furthermore, MSⁿ spectra of [M + Cl]^? ion of N‐protected dipeptide and tripeptide derivatives show characteristic fragmentations that are useful for determining the nature of the C‐terminal gem‐diamino residue. The present paper represents an initial attempt to study the ESI‐MS behavior of these important intermediates and lays the groundwork for structural‐based studies on more complex partially modified retro‐inverso peptides. Copyright © 2013 John Wiley & Sons, Ltd.     

Axial base‐controlled catalytic activity,oxidative stability and product selectivity of water‐insoluble manganese and iron porphyrins for oxidation of styrenes in water under green conditions

A series of water‐insoluble iron(III) and manganese(III) porphyrins, FeT(2‐CH₃)PPCl, FeT(4‐OCH₃)PPCl, FeT(2‐Cl)PPCl, FeTPPCl, MnT(2‐CH₃)PPOAc, MnT(4‐OCH₃)PPOAc, MnT(2‐Cl)PPOAc and MnTPPOAc, in the presence of imidazole (ImH), F^?, Cl^?, Br^? and acetate were used as catalysts for the aqueous‐phase heterogeneous oxidation of styrenes to the corresponding epoxides and aldehydes with sodium periodate. Also, the effect of various reaction parameters such as reaction time, molar ratio of catalyst to axial base, type of axial base, molar ratio of olefin to oxidant and nature of metal centre on the activity and oxidative stability of the catalysts and the product selectivity was investigated. Higher catalytic activities were found for the iron complexes. Interestingly, the selectivity towards the formation of epoxide and aldehyde (or acetophenone) was significantly influenced by the type of axial base. Furthermore, Br^? and ImH were found to be the most efficient co‐catalysts for the oxidation of olefins performed in the presence of the manganese and iron porphyrins, respectively. The optimized molar ratio of catalyst to axial base was different for various axial bases. Also, the order of co‐catalyst activity of the axial bases obtained in aqueous medium was different from that reported for organic solvents. The use of a convenient axial base under optimum reaction catalyst to co‐catalyst molar ratio in the presence of the manganese porphyrin gave the oxidative products with a conversion of ca 100% in a reaction time of less than 3 h. However, the catalytic activity of the iron porphyrins could not be effectively improved by increasing the catalyst to co‐catalyst molar ratio.     

Centimeter‐Sized Single Crystal of Two‐Dimensional Halide Perovskites Incorporating Straight‐Chain Symmetric Diammonium Ion for X‐Ray Detection

Two‐dimensional (2D) AA′_n?1M_nX_3n+1 type halide perovskites incorporating straight‐chain symmetric diammonium cations define a new type of structure, but their optoelectronic properties are largely unexplored. Reported here is the synthesis of a centimeter‐sized AA′_n?1M_nX_3n+1 type perovskite, BDAPbI₄ (BDA=NH₃C₄H₈NH₃), single crystal and its charge‐transport properties under X‐ray excitation. The crystal shows a staggered configuration of the [PbI₆]^4? layers, a band gap of 2.37 eV, and a low trap density of 3.1×10⁹ cm^?3. The single‐crystal X‐ray detector exhibits an excellent sensitivity of 242 μC Gy_air^?1 cm^?2 under the 10 V bias (0.31 V μm^?1), a detection limit as low as 430 nGy_air s^?1, ultrastable response current, a stable baseline with the lowest dark current drift of 6.06×10^?9 nA cm^?1 s^?1 V^?1, and rapid response time of τ_rise=7.3 ms and τ_fall=22.5 ms. These crystals are promising candidates for the next generation of optoelectronic devices.     

d‐electron count,ion‐pairing and diagonal twist angles in metallo‐bis(dithiolene) complexes

Electronic structure calculations for late transition metals coordinated by two dithiolene ligands are found to be consistent with existing structures and also predict the geometries of Ni(I) species for which no solid state structures have been reported. Of particular interest are the compounds [M(mnt)₂]^{n −} (M = Ni, Pd, and Pt with n = 1, 2, 3; M = Cu with n = 2). Calculations have been performed with and without ion‐paring with M(diglyme)⁺ (M = Li, Na, K) and R₄N⁺ (R = Me, Bu). The diagonal twist angle between two NiS₂ planes is found to depend on (i) the metal's d‐electron count, spanning from 0° (planar d⁷ and d⁸), to 42° (d⁹), to 90° (pseudo‐tetrahedral d¹⁰), and (ii) the identity of the ion‐paired cations. Calculated ion‐pairing energies are functions of the cation size and charge‐density, being larger for alkali‐metal coordinated diglyme and smaller for tetra‐alkyl ammonium cations. © 2016 Wiley Periodicals, Inc.