Kinetic Studies on the Palladium(II)‐Catalyzed Oxidative Cross‐Coupling of Thiophenes with Arylboron Compounds and Their Mechanistic Implications

Reaction orders for the key components in the palladium(II)‐catalyzed oxidative cross‐coupling between phenylboronic acid and ethyl thiophen‐3‐yl acetate were obtained by the method of initial rates. It turned out that the reaction rate not only depended on the concentration of palladium trifluoroacetate (reaction order: 0.97) and phenylboronic acid (reaction order: 1.26), but also on the concentration of the thiophene (reaction order: 0.55) and silver oxide (reaction order: ?1.27). NMR spectroscopy titration studies established the existence of 1:1 complexes between the silver salt and both phenylboronic acid and ethyl thiophen‐3‐yl acetate. A low inverse kinetic isotope effect (k_H/k_D=0.93) was determined upon employing the 4‐deuterated isotopomer of ethyl thiophen‐3‐yl acetate and monitoring its reaction to the 4‐phenyl‐substituted product. A Hammett analysis performed with para‐substituted 2‐phenylthiophenes gave a negative ρ value for oxidative cross‐coupling with phenylboronic acid. Based on the kinetic data and additional evidence, a mechanism is suggested that invokes transfer of the phenyl group from phenylboronic acid to a 1:1 complex of palladium trifluoroacetate and thiophene as the rate‐determining step. Proposals for the structure of relevant intermediates are made and discussed.     

Copper‐Mediated ortho‐Nitration of (Hetero)Arenecarboxylates

Various (hetero)arenecarboxylic acids were converted to the corresponding Daugulis amides and nitrated selectively in the ortho‐position in the presence of [CuNO₃(PPh₃)₂] and AgNO₂ at 50 °C. A microwave‐assisted saponification allows regenerating the carboxylate group within minutes, which may then be removed tracelessly by protodecarboxylation, or substituted by aryl‐ or alkoxy‐groups via decarboxylative cross‐coupling.     

Enantioselective ortho‐CH Cross‐Coupling of Diarylmethylamines with Organoborons

The commonly used para‐nitrobenzenesulfonyl (nosyl) protecting group is employed to direct the C? H activation of amines for the first time. An enantioselective ortho‐C? H cross‐coupling between nosyl‐protected diarylmethylamines and arylboronic acid pinacol esters has been achieved utilizing chiral mono‐N‐protected amino acid (MPAA) ligands as a promoter.     

Rhodium‐Catalyzed Annulative Coupling of 3‐Phenylthiophenes with Alkynes Involving Double C‐H Bond Cleavages

Double C?H bond activation took place efficiently upon treatment of 3‐phenylthiophenes with alkynes in the presence of a rhodium catalyst and a copper salt oxidant to form the corresponding naphthothiophene derivatives. Dehydrogenative coupling with alkenes was also found to occur on the phenyl moiety rather than the thiophene ring. These reactions provide straightforward synthetic methods for π‐conjugated molecules involving a thiophene unit from readily available, simple building blocks.     

A Convenient Synthesis of N‐Aryl Benzamides by Rhodium‐Catalyzed ortho‐Amidation and Decarboxylation of Benzoic Acids

The rhodium‐catalyzed amidation of substituted benzoic acids with isocyanates by directed C?H functionalization followed by decarboxylation to afford the corresponding N‐aryl benzamides is demonstrated, in which the carboxylate serves as a unique, removable directing group. Notably, less common meta‐substituted N‐aryl benzamides are generated readily from more accessible para‐ or ortho‐substituted groups by employing this strategy.     

[RhIII(Cp*)]‐Catalyzed ortho‐Selective Direct C(sp2)H Bond Amidation/Amination of Benzoic Acids by N‐Chlorocarbamates and N‐Chloromorpholines. A Versatile Synthesis of Functionalized Anthranilic Acids

A Rh^III‐catalyzed direct ortho‐C?H amidation/amination of benzoic acids with N‐chlorocarbamates/N‐chloromorpholines was achieved, giving anthranilic acids in up to 85 % yields with excellent ortho‐selectivity and functional‐group tolerance. Successful benzoic acid aminations were achieved with carbamates bearing various amide groups including NHCO₂Me, NHCbz, and NHTroc (Cbz=carbobenzyloxy; Troc=trichloroethylchloroformate), as well as secondary amines, such as morpholines, piperizines, and piperidines, furnishing highly functionalized anthranilic acids. A stoichiometric reaction of a cyclometallated rhodium(III) complex of benzo[h]quinoline with a silver salt of N‐chlorocarbamate afforded an amido–rhodium(III) complex, which was isolated and structurally characterized by X‐ray crystallography. This finding confirmed that the C?N bond formation results from the cross‐coupling of N‐chlorocarbamate with the aryl–rhodium(III) complex. Yet, the mechanistic details regarding the C?N bond formation remain unclear; pathways involving 1,2‐aryl migration and rhodium(V)– nitrene are plausible.     

Rhodium(III)‐Catalyzed ortho CH Heteroarylation of (Hetero)aromatic Carboxylic Acids: A Rapid and Concise Access to π‐Conjugated Poly‐heterocycles

Rh^III‐catalyzed oxidative C? H/C? H cross‐coupling between (hetero)aromatic carboxylic acids and various heteroarenes has been accomplished to construct highly functionalized ortho‐carboxy‐substituted bi(hetero)aryls. The use of a carboxy group as the directing group obviates tedious steps for installation and removal of extra directing groups, and enables a facile one‐step synthesis of ortho‐carboxy bi(hetero)aryls. The method provides opportunities for rapid assembly of a library of important fluorene and coumarin‐type poly‐heterocycles through intramolecular electrophilic substitution or oxidative lactonization. As illustrative examples, the strategy developed herein greatly streamlines accesses to a variety of appealing polyheterocycles such as DTPO (5H‐dithieno[3,2‐b:2′,3′‐d]pyran‐5‐one), CPDTO (cyclopentadithiophen‐4‐one), and indenothiophenes.     

Nickel‐Catalyzed Cross‐Coupling Reactions of o‐Carboranyl with Aryl Iodides: Facile Synthesis of 1‐Aryl‐o‐Carboranes and 1,2‐Diaryl‐o‐Carboranes

A nickel‐catalyzed arylation at the carbon center of o‐carborane cages has been developed, thus leading to the preparation of a series of 1‐aryl‐o‐carboranes and 1,2‐diaryl‐o‐carboranes in high yields upon isolation. This method represents the first example of transition metal catalyzed C,C′‐diarylation by cross‐coupling reactions of o‐carboranyl with aryl iodides.     

Palladium‐Catalyzed Heteroarylation and Concomitant ortho‐Alkylation of Aryl Iodides

Three‐component couplings were achieved from common aryl halides, alkyl halides, and heteroarenes under palladium and norbornene co‐catalysis. The reaction forges hindered aryl–heteroaryl bonds and introduces ortho‐alkyl groups to aryl rings. Various heterocycles such as oxazoles, thiazoles and thiophenes underwent efficient coupling. The heteroarenes were deprotonated in situ by bases without the assistance of palladium catalysts.     

Zinc‐Catalyzed Dual C–X and C–H Borylation of Aryl Halides

A zinc‐catalyzed combined C? X and C? H borylation of aryl halides using B₂pin₂ (pin=OCMe₂CMe₂O) to produce the corresponding 1,2‐diborylarenes under mild conditions was developed. Catalytic C? H bond activation occurs ortho to the halide groups if such a site is available or meta to the halide if the ortho position is already substituted. This method thus represents a novel use of a group XII catalyst for C? H borylation. This transformation does not proceed via a free aryne intermediate, but a radical process seems to be involved.     

Stereoselective Synthesis of 1,3‐Diaminotruxillic Acid Derivatives: An Advantageous Combination of CH‐ortho‐Palladation and On‐Flow [2+2]‐Photocycloaddition in Microreactors

The stereoselective synthesis of ε‐isomers of dimethyl esters of 1,3‐diaminotruxillic acid in three steps is reported. The first step is the ortho‐palladation of (Z)‐2‐aryl‐4‐aryliden‐5(4H)‐oxazolones 1 to give dinuclear complexes 2 with bridging carboxylates. The reaction occurs through regioselective activation of the ortho‐C?H bond of the 4‐arylidene ring in carboxylic acids. The second step is the [2+2]‐photocycloaddition of the C?C exocyclic bonds of the oxazolone skeleton in 2 to afford the corresponding dinuclear ortho‐palladated cyclobutanes 3 . This key step was performed very efficiently by using LED light sources with different wavelengths (465, 525 or 625 nm) in flow microreactors. The final step involved the depalladation of 3 by hydrogenation in methanol to afford the ε‐1,3‐diaminotruxillic acid derivatives as single isomers.     

Dehydrogenative Carbon–Carbon Bond Formation Using Alkynyloxy Moieties as Hydrogen‐Accepting Directing Groups

In the presence of a catalyst system consisting of Pd(OAc)₂, PCy₃, and Zn(OAc)₂, the reaction of alkynyl aryl ethers with bicycloalkenes, α,ß‐unsaturated esters, or heteroarenes results in the site‐selective cleavage of two C? H bonds followed by the formation of C? C bonds. In all cases, the alkynyloxy group acts as a directing group for the activation of an ortho C? H bond and as a hydrogen acceptor, thus rendering the use of additives such as an oxidant or base unnecessary.     

Hypervalent Activation as a Key Step for Dehydrogenative ortho CC Coupling of Iodoarenes

Building on earlier results, a direct metal‐free α‐ arylation of substituted cyclic 1,3‐diones using ArI(O₂CCF₃)₂ reagents has been developed; unlike other arylative approaches, the arylated products retain the iodine substituent ortho to the newly formed C?C bond. The mechanism is explored by using DFT calculations, which show a vanishingly small activation barrier for the C?C bond‐forming step. In fact, taking advantage of an efficient in situ hypervalent activation, the iodoarenes are shown to undergo a cross‐ dehydrogenative C?C coupling at the C?H ortho to the iodine. When Oxone is used as terminal oxidant, the process is found to benefit from a rapid initial formation of the hypervalent ArI(OR)₂ species and the sulfate‐accelerated final coupling with a ketone. This method complements the ipso selectivity obtained in the metal‐catalyzed α‐arylation of carbonyl compounds.     

CuBr/proline‐catalyzed cross‐coupling of unactivated benzene with aryl halides

Direct C? H arylation of unactivated benzene with aryl halides was achieved using a readily available copper catalyst. The reaction was carried out at 80 °C, using CuBr as catalyst, proline as ligand and t‐BuOK as base. This radical cross‐coupling reaction between unactivated benzene and aryl iodides proceeds via homolytic aromatic substitution and offers an efficient method for the synthesis of various biaryls in good to excellent yields. Copyright © 2015 John Wiley & Sons, Ltd.     

Towards Ideal Synthesis: Alkenylation of Aryl CH Bonds by a Fujiwara–Moritani Reaction

An overview of recent progress in the Fujiwara–Moritani reaction, which is the palladium‐catalyzed oxidative coupling of arenes with olefins to afford alkenyl arenes, is described. It is emphasized that regioselectivity on aryl ortho‐ or meta‐C?H activation could be controlled very well in the presence of Pd, Rh, or Ru catalysts with the assistance of various chelation groups on aromatic rings in this coupling reaction. Catalytic alkenylation of aryl C?H bonds from simple arenes is also discussed, especially from electron‐deficient arenes. These advanced protocols would not only make the Fujiwara–Moritani reaction more useful and applicable in organic synthesis but also light the way for the further development of the functionalization of normal C?H bonds.     

Cobalt‐Catalyzed Intermolecular C(sp2)O Cross‐Coupling

Cobalt(II)‐catalyzed C(sp²)?O cross‐coupling between aryl/heteroaryl alcohols and vinyl/aryl halides in the presence of Cu^I has been achieved under ligand‐free conditions. In this reaction, copper plays a significant role in transmetalation rather than being directly involved in the C?O coupling. This unique Co/Cu‐dual catalyst system provides an easy access to a library of aryl–vinyl, heteroaryl–styryl, aryl–aryl, and heteroaryl–heteroaryl ethers in the absence of any ligand or additive.     

Regioselective Ruthenium‐Catalyzed Carbonylative Direct Arylation of Five‐Membered and Condensed Heterocycles

A ruthenium‐catalyzed carbonylative C?H bond arylation process for the three‐component synthesis of complex aryl–(hetero)aryl ketones in an aqueous solution has been developed. By exploiting the ortho‐activating effect of nitrogen‐containing directing groups, a regioselective, successive twofold C(sp²)?C(sp²) bond formation has been achieved. This straightforward catalytic process provides access to versatile products prevalent in multiple bioactive compounds and supplies a valuable functional group for subsequent transformations.     

Palladium‐Catalyzed Cascade CH Trifluoroethylation of Aryl Iodides and Heck Reaction: Efficient Synthesis of ortho‐Trifluoroethylstyrenes

A palladium‐catalyzed selective C? H bond trifluoroethylation of aryl iodides has been explored. The reaction allows for the efficient synthesis of a variety of ortho‐trifluoroethyl‐substituted styrenes. Preliminary mechanistic studies indicate that the reaction might involve a key Pd^IV intermediate, which is generated through the rate‐determining oxidative addition of CF₃CH₂I to a palladacycle; the bulky nature of CF₃CH₂I influences the reactivity. Reductive elimination from the Pd^IV complex then leads to the formation of the aryl–CH₂CF₃ bond.     

Palladium‐Catalyzed Oxidative Cross‐Coupling of α‐Cyanoketene Dithioacetals with Olefins

Efficient palladium‐catalyzed cross‐coupling reactions of the internal olefins α‐cyanoketene dithioacetals with a variety of olefins were achieved in dioxane/HOAc/DMSO (9:3:1 v/v/v) under air atmosphere or by means of AgOAc as the terminal oxidant. Electron‐deficient terminal olefins reacted to form the linear diene derivatives with air as the oxidant. Styrenes underwent the cross‐coupling to give both the linear and branched dienes when using AgOAc as the oxidant. Unactivated cyclic and linear internal olefin substrates both reacted in the presence of a catalytic amount of benzoquinone in air to produce skipped dienes. The typical products were structurally confirmed by X‐ray crystallography.     

Copper‐Catalyzed Reductive Cross‐Coupling of Nonactivated Alkyl Tosylates and Mesylates with Alkyl and Aryl Bromides

A copper‐catalyzed reductive cross‐coupling reaction of nonactivated alkyl tosylates and mesylates with alkyl and aryl bromides was developed. It provides a practical method for efficient and cost‐effective construction of aryl–alkyl and alkyl–alkyl C?C bonds with stereocontrol from readily available substrates. When used in an intramolecular fashion, the reaction enables convenient access to various substituted carbo‐ or heterocycles, such as 2,3‐dihydrobenzofuran and benzochromene derivatives.