Physicochemical features of the formation of siliceous porous mesophases

Data on the optimization of alkalinity of the reaction mixture and the reaction temperature in the formation of the siliceous porous mesophase material C₁₆−SiO₂-MMM are presented. A criterion for the evaluation of the level of structure optimization for mesoporous mesophases is formulated. Measurements of the texture parameters of the materials treated in acidic media led to the assumption that the walls in the pure siliceous C₁₆−SiO₂-MMM system consist of separate blocks, which, apparently, are not bound completely to one another by chemical interactions. For Part 2, see Ref. 1. Published inIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1685–1691, October, 2000.     

异相晶种诱导快速合成低硅菱沸石分子筛

在不含有机模板剂体系(OSDAs)中,利用异相晶种(T型分子筛)诱导快速合成出纯相的低硅菱沸石分子筛。采用XRD、SEM、TEM、27Al MAS NMR和紫外拉曼等手段表征分子筛的结构属性和形貌特点。详细研究了菱沸石分子筛的晶化过程以及晶种添加量、nAl2O3/nSi O2、nH2O/nSiO2和碱度对菱沸石分子筛晶化的影响,并探讨T型分子筛晶种诱导合成菱沸石分子筛的晶化机理。原位合成体系中仅形成L型分子筛晶相,而一定量T型分子筛异相晶种的加入诱导溶胶快速制备出纯相的菱沸石分子筛。T型分子筛晶体在一定的水热条件下不断溶解而释放的六元环(6R)和四元环(4R)迅速形成菱沸石分子筛特征笼(CHA笼),抑制了L型分子筛特征单元和特征笼(不含四元环的CAN笼)的形成。     

Organic Thin Film Transistors Based on 2,3‐Dimethylpentacene and 2,3‐Dimethyltetracene

2,3‐Dimethylpentacene (DMP) and 2,3‐dimethyltetracene (DMT) were synthesized, characterized and employed as the channel material in the fabrication of thin‐film transistors. The two methyl groups increase the chemical stability of the compounds versus the pristine acene analogues. The crystals maintain herringbone‐like molecular packing, whereas the weak dipole associated with the unsymmetrical molecule induces an anti‐parallel alignment among the neighbors. This structural motif favors layered film growth on SiO₂/Si surface. Thin film transistors prepared on SiO₂/Si and n‐nonyltrichlorosilane‐modified SiO₂/Si at different substrate temperatures were compared. DMP‐based transistors prepared on rubbed n‐nonyltrichlorosilane‐modified SiO₂/Si substrate gave the highest field‐effect mobility of 0.46 cm²/Vs, whereas DMT‐based transistor gave a mobility of 0.028 cm²/Vs.     

Peculiarities of xonotlite synthesis from the raw materials with different SiO2 activities

In this work, the peculiarities of xonotlite hydrothermal synthesis at 200 °C from lime and SiO₂ materials with different pozzolanic activities (A_P) were investigated: calcinated opoka (A_p?=?170.1 mgCaO kg^?1), granite sawing waste (A_p?=?52.2 mgCaO g^?1) and reagent SiO₂·nH₂O (A_p?=?336.8 mgCaO kg^?1). By XRD, DSC, TG, SEM, FT-IR methods have been shown that the formation of crystalline calcium silicate hydrates and the sequence of the intermediate phases existence are influenced not only by SiO₂ component activity, but by other factors too. The use of the most active raw meal with SiO₂·nH₂O results in a very rapid formation of z-phase, C–S–H(I) and gyrolite, which hardly recrystallize into thermodynamically stable mineral—xonotlite. The impurities in the starting materials may promote the formation of some other compounds and retard the synthesis of stoichiometric ones: high content of Al-containing minerals in granite sawing waste (15.41% of Al₂O₃) predetermines that 1.13 nm tobermorite even after 72 h of hydrothermal curing did not recrystallize into xonotlite. Regardless of its average activity, calcinated opoka is an excellent material for the synthesis of crystalline calcium silicate hydrates. Amorphous SiO₂ from opoka begins to react first, followed by tridymite and cristobalite. 1.13 nm tobermorite and xonotlite are formed at the beginning of the hydrothermal synthesis (4 h), and this greatly reduces the probability of the existence of amorphous phases.

     

Effect of Support on Metathesis of n‐Decane: Drastic Improvement in Alkane Metathesis with WMe5 Linked to Silica–Alumina

[WMe₆] ( 1 ) supported on the surface of SiO₂–Al₂O₃₍₅₀₀₎ ( 2 ) has been extensively characterized by solid‐state NMR spectroscopy, elemental analysis, and gas quantification, which clearly reveal the formation of a mixture of monopodal and bipodal species with the migration of methyl from W to Al. The supported species SiO₂–Al₂O₃₍₅₀₀₎ ( 2 ) transformed at 120 °C into two types of carbynic centers, one of which is cationic and the other neutral. These species are very efficient for the metathesis of n‐decane. Comparison with already‐synthesized neutral bipodal tungsten indicates that the high increase in activity is due to the cationic character of the grafted tungsten.     

以四乙基氢氧化铵为模板并通过转晶法合成高硅铝比的SSZ⁃13沸石分子筛

使用四乙基氢氧化铵为有机模板剂,以低硅铝比(nSiO2/nAl2O3)的Y分子筛为铝源,通过转晶法制备结晶度良好的SSZ?13沸石分子筛。从凝胶配比方面考察了不同原料组成对分子筛合成的影响,并通过X射线衍射(XRD)、扫描电子显微镜(SEM)及电感耦合等离子体(ICP)表征水热反应过程中的物相、形貌、硅铝比等变化,揭示分子筛合成过程。氨选择性催化还原(NH3?SCR)反应显示该分子筛具有优异的催化活性,为其工业上的广泛应用提供了可能性。     

Ethylene Adsorption and Oxidation Kinetics in the Reactions with Pd(II)/SiO2 and Cr(VI)/SiO2: Consideration of Substrate Distribution between the Gas Phase,Silica Gel,and Reaction Centers

The kinetics of ethylene oxidation by PdCl₂ and CrO₃ complexes supported on silica gel (300 K, closed batch reactor) and the adsorption of C₂H₄ by silica gel and metal complex reaction centers (M ⁿ ) were studied. A new version of the kinetic distribution method was applied to determine the rate constants of ethylene reactions with metal complexes with consideration for the equilibrium distribution of C₂H₄ among the reactor gas phase, silica gel, and M ⁿ . The rate constant of a first-order reaction with respect to Cr(VI) (k _e) remained constant as [M ⁿ ] was increased up to 0.15 mol % with the absence of detectable ethylene adsorption by chromium(VI). In the case of Pd(II)/SiO₂, strong ethylene adsorption by palladium(II) was found, and k _e was an exponential function of [M ⁿ ]. This exponential function is indicative of an increase in the specific activity of Pd(II) with palladium concentration on SiO₂. Taking into account the adsorption of ethylene (physisorption on SiO₂ and chemisorption on Pd(II)), we found an analogy between the kinetic behaviors of Pd(II) in reactions with ethylene on silica gel and with ethylene and other hydrocarbons in solutions.     

Sol-Gel Processing of PbZrO3 Thin Films

PbZrO₃ (PZ) thin films have been prepared by 2-methoxyethanol route from lead oxide or lead acetate and zirconium n-butoxide. The use of lead oxide as lead source and the seeding layer of TiO₂ on Pt/TiO₂/SiO₂/Si substrate facilitate the formation of the perovskite phase.     

Catalytic Reactions of n-Propanol and n-Butanol with Hydrogen Sulfide

The transformations of n-propanol and n-butanol in an H₂S atmosphere at T = 300–350°C and P = 0.1 MPa in the presence of acid–base catalysts were studied. Only alcohol dehydration with the release of alkenes occurred at a high rate on catalysts with strong proton sites (tungstosilicic and tungstophosphoric acids on SiO₂ or a decationized high-silica zeolite), whereas alcohol thiolation with the formation of alkanethiols also occurred on catalysts with Lewis acid sites (Al₂O₃; NaX; MgO; Cr/SiO₂; and Al₂O₃ modified with W, K, Na, K₂WO₄, or Na₂WO₄). The rate of reaction decreased with decreasing strength of Lewis acid sites and with increasing strength of basic sites; however, the selectivity of thiol formation increased. Alumina modified with alkaline additives was the most selective catalyst. In the presence of this catalyst, an alcohol selectively reacted with H₂S to form an alkanethiol, and the alkanethiol underwent partial decomposition with the release of an alkene and H₂S at a long contact time.     

A simple microextraction and preconcentration approach based on a mixed matrix membrane

A simple adsorption/desorption procedure using a mixed matrix membrane (MMM) as extraction medium is demonstrated as a new miniaturized sample pretreatment and preconcentration technique. Reversed-phase particles namely polymeric bonded octadecyl (C₁₈) was incorporated through dispersion in a cellulose triacetate (CTA) polymer matrix to form a C₁₈-MMM. Non-steroidal anti-inflammatory drugs (NSAIDs) namely diclofenac, mefenamic acid and ibuprofen present in the environmental water samples were selected as targeted model analytes. The extraction setup is simple by dipping a small piece of C₁₈-MMM (7 mm × 7 mm) in a stirred 10 mL sample solution for analyte adsorption process. The entrapped analyte within the membrane was then desorbed into 100 μL of methanol by ultrasonication prior to high performance liquid chromatography (HPLC) analysis. Each membrane was discarded after single use to avoid any analyte carry-over effect. Several important parameters, such as effect of sample pH, salting-out effect, sample volume, extraction time, desorption solvent and desorption time were comprehensively optimized. The C₁₈-MMM demonstrated high affinity for NSAIDs spiked in tap and river water with relative recoveries ranging from 92 to 100% and good reproducibility with relative standard deviations between 1.1 and 5.5% (n = 9). The overall results obtained were found comparable against conventional solid phase extraction (SPE) using cartridge packed with identical C₁₈ adsorbent.     

Preparation and properties of polyborosiloxanes as precursors for borosilicate formation of SiO2–B2O3 gel fibers and oxides by the sol-gel method using tetraacetoxysilane and boron tri-n-butoxide

Formation of SiO₂–B₂O₃ gel fibers and oxides was investigated by the sol-gel method using tetraacetoxysilane (TAS) and boron tri-n-butoxide (BTB). Low molecular weight borosiloxanes (BS) were formed by the reaction of TAS with BTB in THF. Partial alkoxylation and hydrolysis of BS followed by further condensation of the resulting polymer (PBS) solutions led to the formation of highly polymerized polyborosiloxanes (HPBS) with good spinnability. Gel fibers were obtained by dry spinning of HPBS. The compositions of PBS and gels were not consistent with that in feed. Heat treatment of the gels, however, provided SiO₂–B₂O₃ oxides with compositions almost compatible with those of the gels. © 1994 John Wiley & Sons, Inc.     

Thermal properties of oxide glasses

Glasses with the composition Li₂O·2SiO₂·nTiO₂ and Li₂O·2SiO₂·nZrO₂, where n=0, 0.03, 0.062, 0.1, were prepared and the onset and peak temperatures have been determined by DTA. From these characteristic temperatures, the kinetic parameters describing the nucleation and crystal growth have been obtained by isoconversional methods. The kinetic parameters have been used for the calculation of nucleation and crystal growth times for individual glasses so determining the order of glass stability at reheating. The stability of glasses increases with the content of TiO₂ or ZrO₂ where the increase is higher for ZrO₂. Within the concentration range under study, the increase of both times with the metal oxide concentration is quadratic. It has been discussed that the crystallization kinetics does not obey the Arrhenius law and, therefore, when using the evaluation methods based on this law, the results should not be extrapolated outside the temperature range of the measurements.     

Ultrathin polymer gate buffer layer for air‐stable,low‐voltage,n‐channel organic thin‐film transistors

An ultrathin poly(methyl methacrylate) (PMMA) buffer layer was developed to improve the performance of n‐channel organic thin‐film transistors (OTFTs). The 8 nm‐thick PMMA film, prepared by spin‐coating, provided a very smooth surface and a uniform coverage on SiO₂ surface reproducibly, which was confirmed by X‐ray reflectivity (XR) measurement. Then, we fabricated N,N′‐ditridecyl‐3,4,9,10‐perylenetetracarboxylic diimide (PTCDI‐C13) thin‐film transistors with and without this 8 nm‐thick PMMA insulating layer on SiO₂ gate insulators and achieved one‐order increase of field‐effect mobility (up to 0.11 cm²/(Vs) in a vacuum), one‐half decrease of threshold voltage, and reduction of current hysteresis with the PMMA layer. Only TFTs with the PMMA layer displayed n‐channel operation in air and showed field‐effect mobility of 0.10 cm²/(Vs). We consider that electrical characteristics of n‐channel OTFTs were considerably improved because the ultrathin PMMA film could effectively passivate the SiO₂ insulator surface and decrease interfacial electron traps. This result suggests the importance of the ultrathin PMMA layer for controlling the interfacial state at the semiconductor/insulator interface and the device characteristics of OTFTs. Copyright © 2009 John Wiley & Sons, Ltd.     

Mechanism of Charging of Au Atoms and Nanoclusters on Li Doped SiO2/Mo(112) Films

We present the results of supercell DFT calculations on the adsorption properties of Au atoms and small clusters (Au_n, n≤5) on a SiO₂/Mo(112) thin film and on the same system modified by doping with Li atoms. The adsorbed Li atoms penetrate into the pores of the silica film and become stabilized at the interface where they donate one electron to the Mo metal. As a consequence, the work function of the Li‐doped SiO₂/Mo(112) film is reduced and results in modified adsorption properties. In fact, while on the undoped SiO₂/Mo(112) film Au interacts only very weakly, on the Li‐doped surface Au atoms and clusters bind with significant bond strengths. The calculations show that this is due to the occurrence of an electron transfer from the SiO₂/Mo(112) interface to the adsorbed gold. The occurrence of the charge transfer is related to the work function of the support but also to the possibility for the silica film to undergo a strong polaronic distortion.     

Amino-Modified Silicate Xerogels Complexed with Cu(II) as Catalyst Precursors. Coordination State and Thermal Decomposition

The sol-gel process is a useful method for preparing two series of organically and co-ordinately modified xerogels of the types [CuN _n ]·N _5–n ·5xSiO_4/2 (n < 4) and [Cu(N–N)_n]·(N–N)_2–n ·2x SiO_4/2(n 2), where N = NH₂(CH₂)₃ SiO_3/2, N–N = NH₂(CH₂)₂NH·(CH₂)₃SiO_3/2 and x = [SiO_4/2]/[N] or [SiO_4/2]/[N–N]. The amino groups in the materials are coordinately active and participate partly in the coordination sphere of Cu(II) ions. The composition of the coordination sphere can be varied with the SiO_4/2 content and also as a result of the thermal decomposition of the organic residues at higher temperatures.Because the xerogel materials are considered to be catalyst precursors, this study is focused on their coordination and thermal properties. The prepared xerogels, such as silica, aminated silicates with N and N–N, as well as those entities complexed with Cu(II), were characterised by FT-IR spectroscopy. During gelation and thermal decomposition the materials were analysed by electron paramagnetic resonance (EPR) spectroscopy. The xerogels were additionally studied by UV-Vis absorption spectroscopy. The gaseous products of the thermal decomposition of these materials in an Ar atmosphere were investigated by the use of FT-IR spectroscopy coupled with TG and DTG thermal analysis. These data were complemented by temperature-programmed decomposition (TPDec) in a 2% O₂ + 98% Ar stream coupled with quadrupole mass spectroscopy.     

Effect of Pt nanoparticle size on the specific catalytic activity of Pt/SiO<Subscript>2</Subscript> and Pt/TiO<Subscript>2</Subscript> in the total oxidation of methane and <Emphasis Type="Italic">n</Emphasis>-butane

The dependence of the specific catalytic activity (A _sp ) of the catalysts Pt/SiO₂ and Pt/TiO₂ in the total oxidation of CH₄ and n-C₄H₁₀ on the Pt nanoparticle size (in the range from 1 to 4 nm) was studied. The specific catalytic activity increases with an increase in the platinum nanoparticle size, indicating that the total oxidation is a structure-sensitive reaction. The structure sensitivity depends on the size of an oxidized molecule: it increases sharply on going from CH₄ to n-C₄H₁₀. The support also exerts a considerable effect on the A _sp value: in the oxidation of both CH₄ and C₄H₁₀ the specific catalytic activity for the catalysts Pt/TiO₂ is 3–4 times that for Pt/SiO₂.     

ZrCdOx/SAPO-18双功能催化剂催化CO2加氢合成低碳烯烃性能

采用并流共沉淀法制备了不同Zr/Cd原子比（n_Zr/n_Cd）的ZrCdO_x金属氧化物，并与水热法制备的不同硅铝比（n_SiO2/n_{Al2O3）的片状SAPO-18分子筛物理混合制得ZrCdOx/SAPO-18双功能催化剂，研究了其催化CO2加氢直接合成低碳烯烃性能。采用透射电子显微镜（TEM）、X射线衍射（XRD）、N2吸附-脱附、CO2程序升温脱附（CO2-TPD）、NH3程序升温脱附（NH3-TPD）和X射线光电子能谱（XPS）对催化剂进行了分析。与单一ZrO2相比，引入CdO使得ZrCdOx比表面积下降，当nZr/nCd=8时制备的Zr8Cd1氧化物呈现出无定形小颗粒状，Zr与Cd之间较强的协同作用使得ZrCdOx氧化物产生了更多的氧空位，有利于CO2的吸附活化。通过对Zr8Cd1金属氧化物与SAPO-18（硅铝比0.1）的质量比、工艺反应温度、压力和空速对催化性能影响的考察，获得了最佳反应条件。研究还发现，当SAPO-18的硅铝比从0.1降为0.01时，Brø；nsted酸含量降低，产物中烯烃/烷烃物质的量之比从18.6提高至37.2，但副产物CO含量迅速增加，低碳烯烃时空收率明显下降。}     

Electrophoretic mobility and stability of SiO2 nanoparticles in the solutions of AOT in n-hexadecane-chloroform mixtures

Electrophoretic mobility of SiO₂ nanoparticles in a n-hexadecane-chloroform mixture depending on AOT concentration and chloroform content was determined. It was shown that an increase in chloroform content and a decrease in AOT concentration cause a growth in electrophoretic mobility. The use of the values of Debye lengths (characteristic thickness) of the diffuse part of the electric double layer (EDL) that were determined previously allowed us to calculate the electrokinetic potential and to evaluate the stability of organosols. The obtained data were in good correlation with the dynamics of temporal changes of hydrodynamic radius and the intensity of light scattering. Organosols may be used for heteroaggregation (sorption) of Au and Ag nanoparticles on SiO₂.     

Nonhydrolytic synthesis and structural study of methoxyl-terminated polysiloxane D/Q resins

Low-viscosity, methoxylated polysiloxane resins incorporating Me₂SiO_2/2 (D) and SiO_4/2 (Q) units were prepared using nonhydrolytic condensation between Si—Cl and Si—OMe groups with the formation of MeCl, catalyzed by a Lewis acid. With the commonly used catalysts, condensation between two Si—OMe groups, with formation of Me₂O, also took place to a large extent, hindering the control of the degree of condensation of the resins. Several catalysts were tested by monitoring the formation of MeCl and Me₂O using sealed NMR tubes and ¹H-NMR spectroscopy. The best compromise between reactivity and selectivity was obtained with ZrCl₄. Resins with various compositions were prepared in the absence of solvent by condensation between Me₂SiCl₂ and Si(OMe)₄ at 130°C, catalyzed by 1 mol % ZrCl₄. They were characterized using viscosimetry, gas chromatography coupled with mass-spectrometry (GC-MS), and quantitative ²⁹Si-NMR spectroscopy. The resins consisted of a complicated mixture of oligomers, linear or branched (n > 1) and cyclic (n > 3), with a high degree of D/Q bonding. The distribution of Si—OMe and Si—OSi bonds and the bonding between D and Q units were found to be nearly random. This was ascribed to the occurrence of Si—OSi/Si—OMe and Si—OSi/Si—OSi redistribution reactions that reached equilibrium during the synthesis. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2415–2425, 1998