Synthesis, characterization and crystal structures of cyclometallated palladium (II) compounds containing difunctional ligands with [P,P], [As,As], [N,N], [P,As], [P,N] and [P,O] donor atoms

Treatment of the chloro-bridged dinuclear complex [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}(μ-Cl)]₂ (1) with homobidentate [P,P], [As,As], [N,N], and heterobidentate [P,As], [P,N] ligands in a 1:1 molar ratio gave the dinuclear complexes [{Pd[3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N](Cl)}₂{μ-L}] (L = Ph₂PC₄H₆(NH)CH₂PPh₂ (2); Ph₂As(CH₂)₂AsPh₂ (3); 1,3-(NH₂CH₂)₂C₆H₄ (4); Ph₂P(CH₂)₂AsPh₂ (5); Ph₂P(CH₂)₂NH₂ (6)), with the bidentate ligands bridging the two cyclometallated fragments.The reaction with the homobidentate ligands in a 1:2 molar ratio in the presence of NaClO₄ afforded the mononuclear compounds [[Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{L-P,P}][ClO₄] (L = Ph₂PC₄H₆(NH)CH₂PPh₂ (7); (o-Tol)₂P(CH₂)₂P(o-Tol)₂ (8)), [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{Ph₂As(CH₂)₂AsPh₂-As,As}][ClO₄] (9) and [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{L-N,N}][ClO₄] (L = NH₂(CH₂)₃NH₂ (10); NH₂(C₆H₈)CH₂(C₆H₈)NH₂ (11); 1,3-(NH₂CH₂)₂C₆H₄ (12); 1,3-(NH₂)₂C₅H₃N (13); NH₂(C₆H₄)O(C₆H₄)NH₂ (14); NMe₂(CH₂)₂NMe₂ (15)), in which the chloro ligands are absent and the bidentate ligands are chelated to the palladium atom.Reaction of 1 with Ph₂P(CH₂)₂AsPh₂ in 1:2 molar ratio in acetone in the presence of NH₄PF₆ afforded the analogous mononuclear compound [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{Ph₂P(CH₂)₂AsPh₂-P,As}][PF₆] (16); whereas reaction with Ph₂P(CH₂)₃NH₂ gave [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{Ph₂P(CH₂)₃N(CMe₂)-P,N}][PF₆] (17), derived from intermolecular condensation between the aminophosphine and acetone. Condensation of the NH₂ group was precluded by change of solvent, using dichloromethane.Iminophoshines also reacted with 1 in 1:2 molar ratio in acetone to give a new series of mononuclear cyclometallated complexes: [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{L-P,N}][ClO₄] (L = Ph₂PC₆H₄C(H)NCy (20); Ph₂PC₆H₄C(H)NC(CH₃)₃ (21); Ph₂PC₆H₄C(H)NNMe₂ (22); Ph₂PC₆H₄C(H)NNHMe (23); Ph₂PC₆H₄C(H)NNHPh (24)). Analogous complexes with a stable P,O-chelate were obtained using bidentate [P,O] donor ligands: [Pd{3,4-(MeO)₂C₆H₂C(H)N(Cy)-C6,N}{L-P,O}][Cl] (L = 2-(Ph₂P)C₆H₄CHO (25); Ph₂PN(Me)C(O)Me (26)).The crystal structures of compounds 1, 5, 15, 16, 18, 20 have been determined by X-ray crystallography.     

Pd2dba3/P(i-BuNCH2CH2)3N: a highly efficient catalyst for the one-pot synthesis of trans-4-N,N-diarylaminostilbenes and N,N-diarylaminostyrenes

A Pd₂dba₃/P(i-BuNCH₂CH₂)₃N catalyzed one-pot synthesis of unsymmetrically substituted trans-4-N,N-diarylaminostilbenes and both symmetrically and unsymmetrically substituted N,N-diarylaminostyrene derivatives is reported. The procedure involves two or more palladium catalyzed sequential coupling reactions (an amination and an inter-molecular Heck reaction) in one-pot using the same catalyst system with two different aryl halides, including aryl chlorides and hetero aryl halides as the coupling partners.     

Synthesis and characterization of n=5, 6 members of the La4Srn−4TinO3n+2 series with layered structure based upon perovskite

Layered compounds have been synthesized and structurally characterized for the n=5 and 6 members of the perovskite-related family La₄Sr_n−4Ti_nO_3n+2 by combining X-ray diffraction and transmission electron microscopy. Their structure can be regarded as comprising [(La,Sr)₅Ti₅O₁₇] and [(La,Sr)₆Ti₆O₂₀] perovskite blocks joined by crystallographic shears along the a-axis, with consecutive blocks shifted by 1/2 [100]_p. The n=5 member is similar to the previously reported n=5 member of other A_nB_nO_3n+2-related series. The n=6 member, which has only been briefly reported in other systems previously, is also a well-behaved member of this A_nB_nO_3n+2 series.     

Syntheses and structures of zinc and tin(II) compounds with hemilabile N-silyl-tert-butylamido and N-silyl-p-tolylamido ligands that contain pendent tert-butoxy groups

Syntheses and solid-state structures of zinc and tin(II) compounds, containing the N-silyl-amide ligands (O^tBu)(NR)SiMe₂, R = ^tBu (L^tBu), or R = p-tolyl (L^pTol), are reported. The N-silyl amines were synthesized by modified published procedures from commercially available Me₂SiCl₂, ^tBuOH, and ^tBuNH₂, or p-Me-C₆H₄NH₂, respectively. Treatment of SnCl₂ with LiL^pTol furnished Sn(L^pTol)₂, which was X-ray structurally characterized and shown to contain two covalent Sn-N bonds and two asymmetrical O → Sn donor bonds. The single-crystal X-ray structure of Sn(L^tBu)₂ revealed a much more symmetrically-coordinated, pseudo-trigonal-bipyramidal tin atom. Aminolysis of diethylzinc with HL^pTol produced [EtZn(L^pTol)]₂, which crystallized as a centrosymmetric dimer, containing four-coordinate zinc atoms connected by bridging amides. Zinc dichloride, by contrast, reacted with two equivalents of LiL^tBu to produce the homoleptic, pseudo-spirocyclic Zn(L^tBu)₂.     

Alkyl and dialkylammonium tetrafluoroborate catalyzed cis-trans isomerization of 1,3,5-trimethyl-1,3,5-triphenylcyclotrisiloxane

Alkyl and dialkylammonium tetrafluoroborate promoted cis-trans isomerization of 1,3,5-trimethyl-1,3,5-triphenylcyclotrisiloxane (1) in DMSO-d₆ were studied. The isomerization equilibrium constant K are within the range of 3.74-3.30 from 22 to 47 °C. Thermodynamic parameters of ΔH° and ΔS° for the isomerization were −0.95 kcal/mol and −0.59 cal/mol-K respectively. The isomerization rate is first order in [cis-1] and second order in [R_nNH_4−nBF₄]. Both components of R_nNH_4−n⁺ and BF₄⁻ are essential for the catalytic cis-trans isomerization. The catalytic strength follows the decreasing order of ⁺H₃N(CH₂)₆NH₃⁺>n-C₈H₁₇NH₃⁺>n-C₁₆H₃₃NH₃⁺>Me₃CNH₃⁺>PhCH₂NH₃⁺>Et₂NH₂⁺?Ph₂CHNH₃⁺, Et₃NH⁺. Inversion region was observed in the plot of ln(k_f/T) versus (1/T) with the ceiling located at around 38 °C. The positive activation enthalpy of 9 kcal/mol was estimated at 22-32 °C. The activation enthalpy turns to be slightly negative at T>38 °C.     

Preparation, spectroscopic properties of 1,4-di (N,N-diisopropylacetamido)-2,3(1H,4H)-quinoxalinedione (L) lanthanide complexes and the supramolecular structure of [Nd2L2(NO3)6(H2O)2]·H2O

The reaction of lanthanide nitrate with 1,4-di (N,N-diisopropylacetamido)-2,3(1H,4H)-quinoxalinedione (L) yields six novel Ln(III) complexes ([Ln₂L₂(NO₃)₆(H₂O)₂]·H₂O) which are characterized by elemental analysis, thermogravimetric analysis (TGA), conductivity measurements, IR, electronic and ¹H NMR spectroscopies. A new quinoxalinedione-based ligand is used as antenna ligand to sensitize the emission of lanthanide cations. The lowest triplet state energy level of the ligand in the nitrate complex matches better to the resonance level of Eu(III) and Sm(III) than Tb(III) and Dy(III) ion. The f-f fluorescence is induced in the Eu³⁺ and Sm³⁺ complexes by exciting into the π-π* absorptions of the ligand in the UV. Furthermore, the crystal structures of a novel binuclear complex [Nd₂L₂(NO₃)₆(H₂O)₂]·H₂O has been determined by single-crystal X-ray diffraction. The binuclear [Nd₂L₂(NO₃)₆(H₂O)₂]·H₂O complex units are linked by the intermolecular hydrogen bonds and π-π interactions to form a two-dimensional (2-D) layer supramolecule.     

Synthesis and properties of the Co7Se8−xSx and Ni7Se8−xSx solid solutions

We report the synthesis and elementary properties of the Co₇Se_8−xS_x (x=0-8) and Ni₇Se_8−xS_x (x=0-7) solid solutions. Both systems form a NiAs-type structure with metal vacancies. In general, the lattice parameters decrease with increasing x, but in the Ni₇Se_8−xS_x system c increases on going from x=5 to 7. Magnetic susceptibility measurements show that all samples exhibit temperature-independent paramagnetism from 25-250 K. Samples within the Co₇Se_8−xS_x system, as well as Ni₇Se₈ and Ni₇SeS₇, were found to be poor metals with resistivities of ∼0.20 and ∼0.06 mΩ cm at 300 K, respectively. The Sommerfeld constant (γ) was determined from specific heat measurements to be ∼13 mJ/mol_CoK² and ∼7 mJ/mol_NiK² for Co₇Se_8−xS_x and Ni₇Se_8−xS_x, respectively.     

Effect of boron non-stoichiometry on B-site in perovskite type structure ScBxRh3 and CeBxRh3 on charges of atoms on A-site: study by X-ray photoelectron and nuclear magnetic resonance spectroscopies

The solid solutions of ScBRh₃-ScRh₃ and CeBRh₃-CeRh₃ are synthesized by the arc melting method, where RBRh₃ and RRh₃ (R=rare earth element) have perovskite and AuCu₃ type structures, respectively. The binding energy of Sc 2p_3/2 for ScB_xRh₃ increases with the boron concentration. The Knight shift of ⁴⁵Sc observed by nuclear magnetic resonance spectroscopy decreases with increase of boron concentration. The decrement of the Knight shift corresponds the Sc 4s electron density at the Fermi level. The intensity ratio of f²: f¹: f⁰ of Ce 3d XPS spectrum changes with boron concentration of CeB_xRh₃. It is concluded that in both cases of ScB_xRh₃ and CeB_xRh₃ the charge on the atoms on A-site changes with the concentration of the atoms on B-site, where the atoms are not directly bound.     

Visible light-induced magnetization change of the cyano-bridged 3d-4f heterobimetallic

A visible light-induced magnetization change of the 3d-4f heterometallic, [Nd(DMF)₄(H₂O)₃(μ-NC)Co(CN)₅]·H₂O (DMF=N,N-dimethylformamide), is observed and described. The plots of χ_MT versus T of the complex showed that the χ_MT values, after visible light illumination, were enhanced by about 25% as compared to before irradiation in the temperature range of 5-40 K.     

Synthesis, characterization and intercalation property of layered zirconium benzylamino-N,N-dimethylphosphonate phosphate materials

Layered zirconium benzylamino-N,N-dimethylphosphonate phosphate (ZBMPA) was prepared by the reaction of zirconyl chloride with benzylamino-N,N-dimethylphosphonic acid (H₂BMPA) and phosphoric acid in the presence of hydrofluoric acid. The intercalation of n-alkylamines (n-butylamine, n-heptylamine and n-decylamine) into ZBMPA was primarily investigated at room temperature. These materials were characterized by elemental analysis, ICP, XRD, SEM, FT-IR, Raman spectra, TG and DSC. The composition of ZBMPA is Zr(HPO₄)(C₆H₅CH₂N(CH₂PO₃)₂)_0.5 · 2.0H₂O. The interlayer distance of ZBMPA, n-butylamine, n-heptylamine and n-decylamine intercalation compounds is 2.03, 2.58, 2.52 and 3.17 nm, respectively. ZBMPA and the n-alkylamine intercalation compounds are different in the morphology and vibration spectra. Thermogravimetries of all materials obtained reveal three step mass losses at temperatures of up to 1000 °C. These results indicate that n-alkylamines are intercalated into the galleries of host ZBMPA.     

Synthesis and characterization of new Rh complexes bearing CO, PPh3 and chelating P,O- or Se,Se-ligands: Application to hydroformylation of styrene

The complexes [Rh(CO)(PPh₃){Ph₂PNP(O)Ph₂-P,O}] (3), [Rh(CO)₂{Ph₂P(Se)NP(Se)Ph₂-Se,Se′}] (5), and [Rh(CO)(PPh₃){Ph₂P(Se)NP(Se)Ph₂-Se,Se′}] (6), were synthesised by stepwise reactions of CO and PPh₃ with [Rh(cod){Ph₂PNP(O)Ph₂-P,O}] (2) and [Rh(cod){Ph₂P(Se)NP(Se)Ph₂-Se,Se′}] (4), respectively. The complexes 3, 5 and 6 have been studied by IR, as well as ¹H and ³¹P NMR spectroscopy. The ν(CO) bands of complexes 3 and 6 appear at approximately 1960 cm⁻¹, indicating high electron density at the Rh^I centre. The structure of complexes 3 and 6 has been determined by X-ray crystallography, and the ³¹P NMR chemical shifts have been resolved via low temperature NMR experiments. Both complexes exhibit square planar geometry around the metal centre, with the five-membered ring of complex 3 being almost planar, and the six-membered ring of complex 6 adopting a slightly distorted boat conformation. The C-O bond of the carbonyl ligand is relatively weak in both complexes, due to strong π-back donation from the electron rich Rh^I centre. The catalytic activity of the complexes 2, 3 and 6 in the hydroformylation of styrene has been investigated. Complexes 2 and 3 showed satisfactory catalytic properties, whereas complex 6 had effectively no catalytic activity.     

Crystal Structure of Pseudorhombohedral InFe1−xTixO3+x/2 (x=2/3)

The structure of pseudorhombohedral-type InFe_1−xTi_xO_3−x/2 (x=2/3) was refined by Rietveld profile fitting. The crystal is a commensurate member of a series in a solution range on InFeO₃-In₂Ti₂O₇ including incommensurate structures. The structure with the unit cell of a=5.9188(1), b=10.1112(2), and c=6.3896(1) Å, β=108.018(2)°, and a space group P2₁/a is the alternate stacking of an edge-shared InO₆ octahedral layer and an Fe/Ti-O plane along c^*. Metal sites on the Fe/Ti-O plane are surrounded by four oxygen atoms on the Fe/Ti-O plane and two axial ones. Electric conductivities of the order 10⁻⁴ S/cm were observed for the samples at 1000 K, while the oxide ion transport number is almost zero as no electromotive force was detected by an oxygen concentration cell.     

Catalytic photocarboxylation of 1,1-diphenylethylene with N,N,N′,N′-tetramethylbenzidine and carbon dioxide

Photocarboxylation of 1,1-diphenylethylene with N,N,N′,N′-tetramethylbenzidine (TMB) in MeCN under bubbling of CO₂ proceeded with high catalytic efficiency, giving 3,3-diphenylacrylic acid (DPA) and 3-hydroxy-3,3-diphenylpropionic acid (20). The turnover number (TON=(DPA+20)/TMB) reached 17. Similarly, 1-phenyl-1-cyclohexene yielded cis-2-acetamido-2-phenylcyclohexanecarboxylic acid with TON 5.9. As compared with related N,N-dimethylaniline derivatives, TMB is more resistant to photodecomposition, has the much larger absorbance in the S₀→S₁ transition, and has the lower quenching efficiency by CO₂. Probably these factors are partly responsible for the high TON observed for TMB.     

On the conformational characteristics of the O,O,O-trimethyl selenophosphate molecule

Spectroscopic and theoretical studies were carried out for O,O,O-trimethyl selenophosphate molecule. DFT structural and vibrational calculations were performed at 6-311++G^∗∗ level. Ar/matrix-FTIR spectra were recorded. A coexistence of different conformers with C₃ and C₁ symmetries was detected at different temperatures. Spectral evidence of a lower energy C_s conformer was found. These conclusions are consistent with the results from DFT calculations. A tentative assignment of the features observed in the Ar/matrix-FTIR spectra is proposed.     

Selective functionalization at the small rim of calix[6]arene. Synthesis of novel non-symmetrical N3, N4 and N3ArO biomimetic ligands

Eight novel calix[6]arene-based biomimetic ligands for transition metal ions have been synthesized. They display a non-symmetrical N₃, N₄ or N₃ArO binding core that mimics enzyme active sites presenting histidine and tyrosine residues. The key step for their synthesis is the mono-alkylation at the small rim of the C_3v symmetrical trimethyl ether derivative of tBu-calix[6]arene with N-Boc-2-chloroethylamine to yield a novel calix[6]arene synthon. Its combined O-alkylation with a chloromethyl aromatic amine and N-deprotection or alkylation or reductive alkylation with a salicylaldehyde derivative yielded the calix[6]arene-based ligands with mixed N/O donors.     

Dielectric properties of some MM′O4 and MTiM′O6 (M=Cr, Fe, Ga; M′=Nb, Ta, Sb) rutile-type oxides

We describe an investigation of the structure and dielectric properties of MM′O₄ and MTiM′O₆ rutile-type oxides for M=Cr, Fe, Ga and M′=Nb, Ta and Sb. All the oxides adopt a disordered rutile structure (P4₂/mnm) at ambient temperature. A partial ordered trirutile-type structure is confirmed for FeTaO₄ from the low temperature (17 K) neutron diffraction studies. While both the MM′O₄ oxides (CrTaO₄ and FeTaO₄) investigated show a normal dielectric property MTiM′O₆ oxides for M=Fe, Cr and M′=Nb/Ta/Sb display a distinct relaxor/relaxor-like response. Significantly the corresponding gallium analogs, GaTiNbO₆ and GaTiTaO₆, do not show a relaxor response at T<500 K.     

A novel boron-rich quaternary scandium borocarbosilicide Sc3.67−xB41.4−y−zC0.67+zSi0.33−w

A novel quaternary scandium borocarbosilicide Sc_3.67−xB_41.4−y−zC_0.67+zSi_0.33−w was found. Single crystallites were obtained as an intergrowth phase in the float-zoned single crystal of Sc_0.83−xB_10.0−yC_0.17+ySi_0.083−z that has a face-centered cubic crystal structure. Single crystal structure analysis revealed that the compound has a hexagonal structure with lattice constants a = b = 1.43055(8) nm and c = 2.37477(13) nm and space group (No. 187). The crystal composition calculated from the structure analysis for the crystal with x = 0.52, y = 1.42, z = 1.17, and w = 0.02 was ScB_12.3C_0.58Si_0.10 and that agreed rather well with the composition of ScB_11.5C_0.61Si_0.04 measured by EPMA. In the crystal structure that is a new structure type of boron-rich borides, there are 79 structurally independent atomic sites, 69 boron and/or carbon sites, two silicon sites and eight scandium sites. Boron and carbon form seven structurally independent B₁₂ icosahedra, one B₉ polyhedron, one B₁₀ polyhedron, one irregularly shaped B₁₆ polyhedron in which only 10.7 boron atoms are available because of partial occupancies and 10 bridging sites. All polyhedron units and bridging site atoms interconnect each other forming a three-dimensional boron framework structure. Sc atoms reside in the open spaces in the boron framework structure.     

Synthesis, structure and physical properties of Ru ferrites: BaMRu5O11 (M=Li and Cu) and BaM′2Ru4O11 (M′=Mn, Fe and Co)

The synthesis, structure, and physical properties of five R-type Ru ferrites with chemical formula BaMRu₅O₁₁ (M=Li and Cu) and BaM′₂Ru₄O₁₁ (M′=Mn, Fe and Co) are reported. All the ferrites crystallize in space group P6₃/mmc and consist of layers of edge sharing octahedra interconnected by pairs of face sharing octahedra and isolated trigonal bipyramids. For M=Li and Cu, the ferrites are paramagnetic metals with the M atoms found on the trigonal bipyramid sites exclusively. For M′=Mn, Fe and Co, the ferrites are soft ferromagnetic metals. For M′=Mn, the Mn atoms are mixed randomly with Ru atoms on different sites. The magnetic structure for BaMn₂Ru₄O₁₁ is reported.     

Synthesis of the first difunctional N-fluoro perfluoroalkylsulfonylimides, CF3SO2NFSO2(CF2)nSO2NFSO2CF3

Synthesis of difunctional N,N′-difluoro perfluoroalkylsulfonamides, CF₃SO₂NFSO₂(CF₂)_nSO₂NFSO₂CF₃, where n=4, 6 is reported. A related compound with an oxygen linkage CF₃SO₂NFSO₂(CF₂)₂O(CF₂)₂SO₂NFSO₂CF₃ has also been prepared. These reagents showed good activity for electrophilic fluorination.