Kinetics of the reaction of oh radicals with a series of branched alkanes at 297 ± 2 K

Relative rate constants for the reaction of OH radicals with a series of branched alkanes have been determined at 297 ± 2 K, using methyl nitrite photolysis in air as a source of OH radicals. Using a rate constant for the reaction of OH radicals with n-butane of 2.58 × 10^?12 cm³/molecule · s, the rate constants obtained are (× 10¹² cm³/molecule · s): isobutane, 2.29 ± 0.06; 2-methylbutane, 3.97 ± 0.11; 2,2-dimethylbutane, 2.66 ± 0.08; 2-methylpentane, 5.68 ± 0.24; 3-methylpentane, 5.78 ± 0.11; 2,2,3-trimethylbutane, 4.21 ± 0.08; 2,4-dimethylpentane, 5.26 ± 0.11; methylcyclohexane, 10.6 ± 0.3; 2,2,3,3-tetramethylbutane, 1.06 ± 0.08; and 2,2,4-trimethylpentane, 3.66 ± 0.16. Rate constants for 2,2-dimethylbutane, 2,4-dimethylpentane, and methylclohexane have been determined for the first time, while those for the other branched alkanes are in generally good agreement with the literature data. Primary, secondary, and tertiary group rate constants at room temperature have been derived from these and previous data for alkanes and unstrained cycloalkanes, with the secondary and tertiary group rate constants depending in a systematic manner on the identity of the neighboring groups. The use of these group rate constants, together with a previous determination of the effect of ring strain energy on the OH radical rate constants for a series of cycloalkanes, allows the a priori estimation of OH radical rate constants for alkanes and cycloalkanes at room temperature.     

Excess enthalpies of binary mixtures of 1-hexene with some branched alkanes at the temperature 298.15 K

Measurements of excess molar enthalpies at the temperature 298.15 K in a flow microcalorimeter are reported for the five binary mixtures formed by mixing 1-hexene with the branched alkanes: 2-methylpentane, 3-methylpentane, 2,2-dimethylbutane, 2,3-dimethylbutane, and 2,2,4-trimethylpentane. Smooth Redlich–Kister representations of the results are described. It was found that the Liebermann–Fried model also provided good representations of the results.     

Heat capacities of binary mixtures of n-heptane with hexane isomers

Volumetric heat capacities were measured for binary mixtures of n-heptane with n-hexane, 2-methylpentane, 3-methylpentane, 2,2-dimethylbutane, and 2,3-dimethylbutane at 298.15 K in a Picker flow microcalorimeter. The results were combined with previously published excess molar volumes to obtain excess molar isobaric heat capacities. Use of the Flory theory of mixtures to interpret the latter is discussed.     

Determination of the most stable conformers of branched alkanes by 13C-NMR spectroscopy at very low temperatures

¹³C-NMR measurements at 90,51 MHz at 85- 94 K lead to the conclusion, that for 2,3-dimethylbutane, 2,3-dimethylpentane as well as for meso- and DL- 3,4- dimethylhexane gauche is the minimum energy conformation     

Radiation-induced synthesis of branched liquid alkanes

The irradiation of gaseous alkane mixtures under circulation conditions was used for the synthesis of liquid branched hydrocarbons. It was found that the synthesized liquid product was a mixture of alkanes with the average molecular weight higher than the molecular weight of the parent gas by a factor of 3–4. The resulting liquids were characterized by boiling range from 35 to 200°C in atmospheric distillation. The average degree of molecular branching in the synthesized liquids was evaluated on the basis of their knock resistance. The octane ratings of liquid mixtures were above 95 (motor octane number) or 103 (research octane number). The fractional composition and detonation properties of the synthesized liquids suggested the prevalence of C₅–C₁₁ isomers with highly branched structures in these liquids. Depending on irradiation conditions, 2,3-dimethylbutane, 2-methylpentane, or 3-methylpentane was predominant among hexanes. As a rule, 2,2,3-trimethylbutane and 2,3-dimethylpentane prevailed among heptanes.     

Excess enthalpies of binary mixtures of n-octane with each of the hexane isomers at 298.15 K

Excess molar enthalpies, measured at 298.15 K in a flow microcalorimeter, are reported for the five binary systems formed by mixing n-octane with n-hexane, 2-methylpentane, 3-methylpentane, 2,2-dimethylbutane and 2,3-dimethylbutane. The results for equimolar mixtures, together with similar data for other n-alkane + hexane isomer mixtures, are correlated in terms of the acentric factors of the n-alkanes.     

Kinetic and mechanistic study with optically active, four-coordinate nickel(II) complexes: stereoselectivity in ligand substitution

Conventional and rapid scan stopped-flow spectrophotometry as well as polarimetry was used to study the kinetics of ligand substitution in six chiral bis N-alkylsalicylaldiminato nickel(II) complexes NiA2 by different chiral salen-type ligands H2B, according to NiA2 + H2B --> NiB + 2HA, in acetone at 298 K and, partly, at variable temperature. In most cases ligand substitution was found to follow monophasic second-order kinetics, rate = k x [NiA2] x [H2B]. Second-order rate constant k, lying in the range 10(-2)-400 M(-1) s(-1) at 298 K, was determined for the various combinations of enantiomers in a given system NiA2/H2B, namely, R-NiA2/R-H2B, S-NiA2/R-H2B, R-NiA2/S-H2B, and S-NiA2/S-H2B. It was found that ligand substitution is subject to chiral discrimination. The ratio of second-order rate constants, kfast/kslow, with kfast being rate constant k for the faster reacting pair of enantiomers and vice versa, lies in the range 1.0-3.0, depending on the nature of the N-alkyl groups in NiA2 and organic groups attached to the ethylene bridge in the salen ligands H2B. The rate discrimination factor of 3.0, as obtained for NiA2 = bis[N-dehydroabietylsalicylaldiminato]nickel(II) reacting with the R- and with the S-enantiomer of H2B = N,N'-disalicylidene-1,2-diamino-4-methylpentane, appears to be the highest stereoselectivity reported so far for ligand substitution in nickel(II) complexes. With NiA2 = R- and S-bis[N-(1-phenylethyl)-5-nitrosalicylaldiminato]nickel(II) and H2B = R- and S-N,N-disalicylidene-1,2-diamino-4-methylpentane, the kinetics of ligand substitution are biphasic, describing initial adduct formation between NiA2 and H2B (equilibrium constant K) and stepwise loss of the two bidentate ligands HA (first-order rate constants k1 and k2). The data for K, k1, and k2 for one of the combinations of enantiomers were determined at variable temperature, and the corresponding activation parameters are presented.     

The Complexing Abilities of Diethyleneoxy-and Xylene-bridged Cryptophanes with Alkanes

Abstract

The Syn isomers (3b and 4b) of xylene-bridged cryptophane showed selective complexing abilities for 2,2-dimethylbutane, 3-methylpentane, 3,3-di-methylpentane and 3-ethylpentane among the investigated alkanes, although the Anti isomers (3a,4a,5a) did not complex with these alkanes. However, both the Anti-and Syn-isomers (2a and 2b) of the diethyleneoxy-bridged cryptophane showed selective complexing abilities for 2,2-dimethylbutane, 3,3-dimethylpentane, 2,2,3-trimethylbutane and 2,2,3,3-terramethybutane among the investigated alkanes.     

Rate constants for the reactions of hydroxyl radical with several fluoroethers by the relative rate method

Relative rate experiments were used to measure ratios of chemical kinetics rate constants as a function of temperature for the reactions of OH with eight fluoroethers, including CF3OCF2CHF2, CF3OCF2CHFCF3, CHF2CF2OCHF2, CF3CHFCF2OCH2CF3, (CF3)2CHOCHF2, CF2HCF2OCH2CF3, CHF2CF2OCHFCF3, and CF3CH2OCH2CF3. The temperature ranges were about 270-400 K. Each compound was measured against at least two references. Results are compared with previous data where available. An approach using model compounds for the approximate estimation of rate constants for the fluoroethers is discussed. Observed temperature dependences for fluoroethers from the present work and some literature work are shown to be accurately predictable, based on a previously determined correlation of k298K with the pre-exponential factor, A, in the Arrhenius equation k = Ae(-E/RT).     

Rate constant for the reaction of OH with H2 between 200 and 480 K

The rate constant for the reaction of OH radicals with molecular hydrogen was measured using the flash photolysis resonance-fluorescence technique over the temperature range of 200-479 K. The Arrhenius plot was found to exhibit a noticeable curvature. Careful examination of all possible systematic uncertainties indicates that this curvature is not due to experimental artifacts. The rate constant can be represented by the following expressions over the indicated temperature intervals: k(H2)(250-479 K) = 4.27 x 10(-13) x (T/298)2.406 x exp[-1240/T] cm3 molecule(-1) (s-1) above T = 250 K and k(H2)(200-250 K) = 9.01 x 10(-13) x exp[-(1526 +/- 70)/T] cm3 molecule(-1) s(-1) below T = 250 K. No single Arrhenius expression can adequately represent the rate constant over the entire temperature range within the experimental uncertainties of the measurements. The overall uncertainty factor was estimated to be f(H2)(T) = 1.04 x exp[50 x /(1/T) - (1/298)/]. These measurements indicate an underestimation of the rate constant at lower atmospheric temperatures by the present recommendations. The global atmospheric lifetime of H2 due to its reaction with OH was estimated to be 10 years.     

Can alkane isomers be separated? Adsorption equilibrium and kinetic data for hexane isomers and their binary mixtures on MFI

In this study we present a global overview of the adsorption behavior of hexane isomers on MFI. With an experimental approach that couples a manometric technique with Near Infrared (NIR) spectroscopy, which has been recently developed, we did address adsorption kinetic properties of n-hexane, 2-methylpentane, 2,2-dimethylbutane and 2,3-dimethylbutane, and their binary mixtures. The adsorption equilibrium properties of the binary mixtures were also assessed using the same technique. Whereas the adsorption isotherms and heats of adsorption for single components have been studied by a manometric technique coupled with a micro calorimeter. The differential heats of adsorption of n-hexane increase slightly with loading, on the other hand the heat of adsorption of branched hexanes exhibits a decrease with loading. The diffusion rates on MFI of n-hexane, 2-methylpentane and 2,3-dimethylbutane are in the same order of magnitude. However, the diffusion rate of 2,2-dimethylbutane is two orders of magnitude lower than rates of the other isomers. In the binary mixtures the components interact and the difference between the diffusion rates of the components decreases. The MFI zeolite presents equilibrium selectivity towards the less branched isomers. In conclusion, a separation process for linear/mono-branched alkanes + double-branched alkanes, has to be based on its equilibrium properties and not based on adsorption kinetics.     

Selective methylative homologation: an alternate route to alkane upgrading

InI3 catalyzes the reaction of branched alkanes with methanol to produce heavier and more highly branched alkanes, which are more valuable fuels. The reaction of 2,3-dimethylbutane with methanol in the presence of InI3 at 180-200 degrees C affords the maximally branched C7 alkane, 2,2,3-trimethylbutane (triptane). With the addition of catalytic amounts of adamantane the selectivity of this transformation can be increased up to 60%. The lighter branched alkanes isobutane and isopentane also react with methanol to generate triptane, while 2-methylpentane is converted into 2,3-dimethylpentane and other more highly branched species. Observations implicate a chain mechanism in which InI3 activates branched alkanes to produce tertiary carbocations which are in equilibrium with olefins. The latter react with a methylating species generated from methanol and InI3 to give the next-higher carbocation, which accepts a hydride from the starting alkane to form the homologated alkane and regenerate the original carbocation. Adamantane functions as a hydride transfer agent and thus helps to minimize competing side reactions, such as isomerization and cracking, that are detrimental to selectivity.     

Isomerization of n-Hexane Over Platinum Ion-Exchanged Zeolite Beta

Zeolite Beta was synthesized from appropriate gels and crystallized under the controlled temperature and pressurized conditions. For isomerization of n-hexane, platinum ion-exchanged zeolite Beta exhibited high activity and selectivity for 2,2-dimethylbutane (2,2-DMB), 2,3-dimethylbutane (2,3-DMB), 2-methylpentane (2-MP) and 3-methylpentane (3-MP). As high as 72% of n-hexane conversion and 98% of product selectivity were obtained at 250°C, 1600 h^–1 for 20 min on stream. The influences of reaction temperature and space velocity were also studied. Pt/H-Beta zeolite was recommended as one of the promising catalyst for n-hexane isomerization due to its high activity and stability. The combined effect of the stronger acidity possessed by H-Beta and the dehydrogenation role played by Pt was believed to be responsible for the good catalytic performance of Pt/H-Beta.     

Kinetics Investigation of OH reaction with isoprene at 240-340 K and 1-3 torr using the relative rate/discharge flow/mass spectrometry technique

The kinetics of the reaction of OH radical with isoprene has been investigated at a total pressure of 1-3 Torr over a temperature range of 240-340 K using the relative rate/discharge flow/mass spectrometry (RR/DF/MS) technique. The reaction of isoprene with OH was found to be independent of pressure over the pressure range of 1-3 Torr at 298 K, and the reaction had reached its high-pressure limit at 1 Torr. However, the rate constant of this reaction is found to positively depend on pressure at 1-3 Torr and 340 K. At 298 K, the rate constant of this reaction was determined to be k1 = (10.4 +/- 1.9) x 10(-11) cm3 molecule(-1) s(-1), which is in good agreement with literature values. The Arrhenius expression for this reaction was determined to be k1 = (2.33 +/- 0.09) x 10(-11) exp[(444 +/- 27)/T] cm3 molecule(-1) s(-1) at 240-340 K. The atmospheric lifetime of isoprene was estimated to be 2.9 h based on the rate constant of isoprene + OH determined at 277 K in the present work.     

Comparison of radiolysis of cyclopentane, 2,3-dimethylbutane,and neopentane at 4.2 K with that at 77 K as studied by analysis of dimer products

The γ-radiolysis of cyclopentane, 2,3-dimethylbutane, and neopentane at 4.2 K was compared with that at 77 K by analysis of dimer products with capillary gas chromatography. In the radiolysis of cyclopentane, the yield of bicyclopentyl dimer at 4.2 K is lower than that at 77 K. The difference of the yields at two temperatures was explained in terms of disproportionation reaction of cyclopentyl radicals at very low temperature. In the radiolysis of 2,3-dimethylbutane, the distribution of dimer products at 4.2 K is different from that at 77 K. The results is due to the effect of phase change between two temperatures. In the radiolysis of 2,3-dimethylbutane, the fraction of unsaturated dimers in all dimer products at 77 K is much larger than that at 4.2 K. The olefinic dimer-products at 77 K is related to favorable formation of olefinic cations at 77 K. In the radiolysis of solid neopentane, addition of helium gas promotes the formation of 2,2,3,3-tetramethylbutane by a non-radical process.     

Mechanism and kinetics of hydrated electron diffusion

Molecular dynamics simulations are used to study the mechanism and kinetics of hydrated electron diffusion. The electron center of mass is found to exhibit Brownian-type behavior with a diffusion coefficient considerably greater than that of the solvent. As previously postulated by both experimental and theoretical works, the instantaneous response of the electron to the librational motions of surrounding water molecules constitutes the principal mode of motion. The diffusive mechanism can be understood within the traditional framework of transfer diffusion processes, where the diffusive step is akin to the exchange of an extramolecular electron between neighboring water molecules. This is a second-order process with a computed rate constant of 5.0 ps(-1) at 298 K. In agreement with experiment the electron diffusion exhibits Arrhenius behavior over the temperature range of 298-400 K. We compute an activation energy of 8.9 kJ mol(-1). Through analysis of Arrhenius plots and the application of a simple random walk model it is demonstrated that the computed rate constant for exchange of an excess electron is indeed the phenomenological rate constant associated with the diffusive process.     

Atmospheric degradation of 2-butanol, 2-methyl-2-butanol, and 2,3-dimethyl-2-butanol: OH kinetics and UV absorption cross sections

The absolute rate coefficients for the reactions of hydroxyl radical (OH) with 2-butanol (k(1)), 2-methyl-2-butanol (k(2)), and 2,3-dimethyl-2-butanol (k(3)) were measured as a function of temperature (263-354 K) and pressure (41-193 Torr of He, Ar, and N(2)) by the pulsed laser photolysis/laser-induced fluorescence technique. This work represents the first absolute determination of k(1)(-)k(3) and their temperature dependence. No pressure dependence of the rate coefficients was observed in the range studied. Thus, k(i)(298 K) values (x10(-12) cm(3) molecule(-1) s(-1) with an uncertainty of +/-2sigma) were averaged over the pressure range studied yielding 8.77 +/- 1.46, 3.64 +/- 0.60, and 9.01 +/- 1.00 for 2-butanol (k(1)), 2-methyl-2-butanol (k(2)), and 2,3-dimethyl-2-butanol (k(3)), respectively. k(1) and k(3) exhibit a slightly negative temperature dependence over the temperature range studied. In contrast, the rate coefficient for the reaction of OH with 2-methyl-2-butanol (k(2)) did not show any temperature dependence. Some deviation of the conventional Arrhenius behavior was clearly observed for k(3). In this case, the best fit to our data was found to be described by the three-parameter expression k(T) = A + B exp(-C/T). The UV absorption cross sections of 2-butanol, 2-methyl-2-butanol, and 2,3-dimethyl-2-butanol have also been measured at room temperature between 208 and 230 nm. The values reported constitute the first determination of the UV cross sections of those alcohols. Our results are compared with previous studies, when possible, and are discussed in terms of the H-abstraction by OH radicals. The atmospheric implications of these reactions and the photochemistry of these alcohols are also discussed.     

13C NMR studies of hydrocarbon guests in synthetic structure H gas hydrates: experiment and computation

(13)C NMR chemical shifts were measured for pure (neat) liquids and synthetic binary hydrate samples (with methane help gas) for 2-methylbutane, 2,2-dimethylbutane, 2,3-dimethylbutane, 2-methylpentane, 3-methylpentane, methylcyclopentane, and methylcyclohexane and ternary structure H (sH) clathrate hydrates of n-pentane and n-hexane with methane and 2,2-dimethylbutane, all of which form sH hydrates. The (13)C chemical shifts of the guest atoms in the hydrate are different from those in the free form, with some carbon atoms shifting specifically upfield. Such changes can be attributed to conformational changes upon fitting the large guest molecules in hydrate cages and/or interactions between the guests and the water molecules of the hydrate cages. In addition, powder X-ray diffraction measurements revealed that for the hexagonal unit cell, the lattice parameter along the a-axis changes with guest hydrate former molecule size and shape (in the range of 0.1 ?) but a much smaller change in the c-axis (in the range of 0.01 ?) is observed. The (13)C NMR chemical shifts for the pure hydrocarbons and all conformers were calculated using the gauge invariant atomic orbital method at the MP2/6-311+G(2d,p) level of theory to quantify the variation of the chemical shifts with the dihedral angles of the guest molecules. Calculated and measured chemical shifts are compared to determine the relative contribution of changes in the conformation and guest-water interactions to the change in chemical shift of the guest upon clathrate hydrate formation. Understanding factors that affect experimental chemical shifts for the enclathrated hydrocarbons will help in assigning spectra for complex hydrates recovered from natural sites.     

Rate constants for the gas-phase reactions of alkanes with Cl atoms at 296 ± 2 K

Rate constants for the gas-phase reactions of the Cl atom with a series of alkanes have been determined at 296 ± 2 K using a relative rate method. Using a rate constant for the Cl atom reaction with n-butane of 1.94 × 10^?10 cm³ molecule^?1 s^?1, the rate constants obtained (in units of 10^?11 cm³ molecule^?1 s^?1) were: 2-methylpentane, 25.0 ± 0.8; 3-methylpentane, 24.8 ± 0.6; cyclohexane, 30.8 ± 1.2; cyclohexane-d₁₂, 25.6 ± 0.8; 2,4-dimethylpentane, 25.6 ± 1.2; 2,2,3-trimethylbutane, 17.9 ± 0.7; methylcyclohexane, 34.7 ± 1.2; n-octane, 40.5 ± 1.2; 2,2,4-trimethylpentane, 23.1 ± 0.8; 2,2,3,3-tetramethylbutane, 15.6 ± 0.9; n-nonane, 42.9 ± 1.2; n-decane, 48.7 ± 1.8; and cis-bicyclo[4.4.0]decane, 43.1 ± 0.8, where the indicated errors are two least-squares standard deviations and do not include the uncertainties in the n-butane rate constant. These data have been combined with rate constants obtained previously for ten C₂? C₇ alkanes and this entire data set has been used to develop an estimation method allowing the room temperature rate constants for the reactions of the Cl atom with alkanes to be calculated. © 1995 John Wiley & Sons, Inc.     

Mechanism and selectivity of radical alkylation of 3,4-Dichloro-2,5-dihydrofuran-2,5-dione

The mechanism of radical alkylation of 3,4-dichloro-2,5-dihydrofuran-2,5-dione with cyclohexane and 2,3-dimethylbutane follows an addition-elimination pattern with reversible formation of alkyl radicals. The proposed kinetic scheme takes into account the possibility for isomerization of primary 2,3-dimethylbutane radicals into tertiary and is consistent with the experimental data. The regioselectivity of the process is linearly related to the concentration of hydrogen chloride, so that the rate constant for the addition of primary 2,3-dimethylbutane radical to 3,4-dichloro-2,5-dihydrofuran-2,5-dione may be estimated. Effective procedures for the synthesis of 3-chloro-4-(2,3-dimethylbut-2-yl)-, 3-chloro-4-cyclohexyl-, and 3,4-dicyclohexyl-2,5-dihydrofuran-2,5-diones have been proposed.