Water-soluble conjugated polymer-induced self-assembly of gold nanoparticles and its application to SERS

Gold nanochains were prepared by the assembly of citrate-stabilized gold nanospheres induced by cationic conjugated polymers. This assembly method was rapid, and the assembled product was very stable. A longitudinal plasmon resonance band was formed as a result of the coupling of gold nanoparticles and can be tuned from visible to near-infrared by adjusting the polymer/Au molar ratio. The gold nanochains were used as a SERS substrate and gave an enhancement factor of 8.4 x 10 (9), which is approximately 400 times larger than that on the isolated gold nanosphere substrate. The giant SERS enhancement is ascribed to the large electromagnetic fields of coupled gold nanoparticles.     

Constructing hybrid films of conjugated oligomers and gold nanoparticles for efficient photoelectronic properties

Hybrid films of conjugated oligomers and gold nanoparticles have been fabricated by a coordination approach on the surface of gold nanoparticles. This method facilitates mild linkage of the oligomer/nanoparticle layers in ambient conditions, which provides a general route for preparation of organic/inorganic interlayer superstructures. Characterization of the as-obtained hybrid film has been carried out by UV-vis absorption, fluorescence spectroscopy, and atomic force microscopy (AFM). The hybrid film exhibits dramatic changes in both optical and photovoltaic properties upon encapsulation of fullerene. A photoelectrical application is presented by taking electrochemical measurements of the self-assembled film. The results reveal potential technological uses in photovoltaic devices.     

Solid-state packing of conjugated oligomers: from pi-stacks to the herringbone structure

The solid-state structures of a series of bithiazole and thiophene oligomers, as well as a series of substituted pentacenes, are rationalized in terms of "pitch and roll" inclinations from an "ideal" cofacial pi-stack. Pitch inclinations translate adjacent molecules relative to one another in the direction of the long molecular axis, whereas roll inclinations translate the molecules along the short molecular axis. Thus, moderately large pitch distortions preserve pi-pi interactions between adjacent molecules, whereas roll translations greater than 2.5 A essentially destroy pi-pi overlap between adjacent molecules. The familiar herringbone packing is characterized by large roll distortions. It is shown that thiophenes tend to exhibit large roll translations, whereas thiazoles have small roll but large pitch translations. Substituted pentacenes tend to have both moderate pitch and roll distances. The relationship of molecular packing to transport properties is discussed.     

From oligomers to polymer: convergence in the HOMO-LUMO gaps of conjugated oligomers

[Structure: see text] Extrapolation of HOMO-LUMO gaps for pi-conjugated oligomers at the B3LYP/6-31G(d) level of theory predict accurately (within 0.1-0.2 eV) the band gaps of conjugated polymers only when long (at least 20-mer) pi-conjugated oligomers are used for the extrapolation.     

Solvent-induced self-assembly of mixed poly(methyl methacrylate)/polystyrene brushes on planar silica substrates: molecular weight effect

The effect of molecular weight on the solvent-induced self-assembly of mixed poly(methyl methacrylate) (PMMA)/polystyrene (PS) brushes on silicon wafers was studied. For a series of mixed brushes with a fixed PMMA M(n) and systematically changed PS M(n), a transition in water advancing contact angle (theta(a)) from 74 degrees, the value for a flat PMMA surface, to 91 degrees, the value for a flat PS film, was observed with increasing PS M(n) after treatment with CHCl(3). Atomic force microscopy studies showed smooth surfaces for all samples. While no significant changes in surface morphologies were observed after treatment with cyclohexane, a selective solvent for PS, contact angle and XPS studies indicated that the mixed brushes with a PS M(n) slightly smaller than that of PMMA underwent self-reorganization, exhibiting a different theta(a). Intriguing surface morphologies composed of relatively ordered nanoscale domains were found from mixed brushes with PS M(n) slightly smaller than or similar to that of PMMA after treatment with acetic acid, a selective solvent for PMMA. The nanodomains are speculated to be of a micellar structure, with PS chains forming a core shielded by PMMA chains.     

Controlling the self-assembly structure of magnetic nanoparticles and amphiphilic block-copolymers: from micelles to vesicles

We report how to control the self-assembly of magnetic nanoparticles and a prototypical amphiphilic block-copolymer composed of poly(acrylic acid) and polystyrene (PAA-b-PS). Three distinct structures were obtained by controlling the solvent-nanoparticle and polymer-nanoparticle interactions: (1) polymersomes densely packed with nanoparticles (magneto-polymersomes), (2) core-shell type polymer assemblies where nanoparticles are radially arranged at the interface between the polymer core and the shell (magneto-core shell), and (3) polymer micelles where nanoparticles are homogeneously incorporated (magneto-micelles). Importantly, we show that the incorporation of nanoparticles drastically affects the self-assembly structure of block-copolymers by modifying the relative volume ratio between the hydrophobic block and the hydrophilic block. As a consequence, the self-assembly of micelle-forming block-copolymers typically produces magneto-polymersomes instead of magneto-micelles. On the other hand, vesicle-forming polymers tend to form magneto-micelles due to the solubilization of nanoparticles in polymer assemblies. The nanoparticle-polymer interaction also controls the nanoparticle arrangement in the polymer matrix. In N,N-dimethylformamide (DMF) where PS is not well-solvated, nanoparticles segregate from PS and form unique radial assemblies. In tetrahydrofuran (THF), which is a good solvent for both nanoparticles and PS, nanoparticles are homogeneously distributed in the polymer matrix. Furthermore, we demonstrated that the morphology of nanoparticle-encapsulating polymer assemblies significantly affects their magnetic relaxation properties, emphasizing the importance of the self-assembly structure and nanoparticle arrangement as well as the size of the assemblies.     

TAT conjugated, FITC doped silica nanoparticles for bioimaging applications

Water-in-oil (w/o) microemulsion synthesis of 70 nm size monodisperse TAT (a cell penetrating peptide, CPP) conjugated, FITC (fluorescein isothiocyanate) doped silica nanoparticles (TAT-FSNPs) is reported; human lung adenocarcinoma (A549) cells (in vitro) and rat brain tissue (in vivo) were successfully labeled using TAT-FSNPs.     

New conjugated monomers and oligomers derived from chalcones and containing thiophene,pyrrole, and pyrimidine fragments

4New hybrid systems based on a series of chalcones and containing pyrimidine, thiophene, and pyrrole fragments were synthesized, and their electrochemical properties were studied.     

基于含硫芳杂稠环化合物的可溶性共轭齐聚物的合成、表征及其在有机薄膜晶体管中的应用

设计并合成了4个基于含硫芳杂稠环化合物的可溶性共轭齐聚物,即以3-十一烷基苯并[d,d’]噻吩并[3,2-b;4,5-b ’]并二噻吩(BTTT)为末端芳香单元,噻吩(T)、二噻吩(bT)、N-十二烷基-二噻吩并[3,2-b]吡咯(TP)或2,5-双(3-十二烷基噻吩)[3,2-b]并二噻吩 (qT)为中间芳香单元的...     

ZnS:Mn nanoparticles conjugated to sol–gel-derived silica matrices

Composites from ZnS:Mn nanoparticles and modified silicas are of interest for a broad range of potential applications in the form of films, structured particles, and self-assembled structures (e.g., colloidal crystals). They combine the versatility of silica sol gel chemistry with the wealth of functionalities available from doped nanoparticulate semiconductors (e.g., optical, electrical, and magnetic). In this work, ZnS:Mn nanoparticles have been prepared and modified in such a way that they can be incorporated seamlessly, either by inclusion or by covalent bonding into silicas. Functionalization was achieved through the use of silanes or thioles. Further processing by standard sol gel chemistry then either led directly to covalent conjugation with the silica network formed after condensation, or to isolated particles encapsulated in a silica shell. The results are heavily loaded (up to 30 wt%), transparent (including semiconductor particles that are smaller than 15 nm) and luminescent films, and massive bodies. In this work, the progress of nanocomposite formation was followed mainly by luminescence spectroscopy. Further work will have to address the electrical and magnetic properties of these nanocomposites as well.     

Didodecyldimethylammonium bromide lipid bilayer-protected gold nanoparticles: synthesis, characterization, and self-assembly

Didodecyldimethylammonium bromide (DDAB) lipid bilayer-protected gold nanoparticles (AuNPs), which were stable and hydrophilic, were synthesized by in situ reduction of HAuCl(4) with NaBH(4) in an aqueous medium in the presence of DDAB. As-prepared nanoparticles were characterized by UV-vis spectra, transmission electron microscopy, dynamic light scattering analysis, and X-ray photoelectron spectroscopy. All these data supported the formation of AuNPs. Fourier transform infrared spectroscopy (FTIR) and differential thermal analysis/thermogravimetric analysis data revealed that DDAB existed in a bilayer structure formed on the particle surface, resulting in a positively charged particle surface. The FTIR spectra also indicated that the DDAB bilayer coated on the surface of AuNPs was probably in the ordered gel phase with some end-gauche defects. On the basis of electrostatic interactions between such AuNPs and anionic polyelectrolyte poly(sodium 4-styrenesulfonate) (PSS), we successfully fabricated (PSS/AuNP)(n)() multilayers on a cationic polyelectrolyte poly(ethylenimine) coated indium tin oxide substrate via the layer-by-layer self-assembly technique and characterized as-formed multilayers with UV-vis spectra and atomic force microscopy.     

Preparation of hybrid fluorescent-magnetic nanoparticles for application to cellular imaging by self-assembly

A unique fluorescent-magnetic hybrid bimodal nanocomposite was prepared by the layer-by-layer self-assembly (LbL) technique fabrication of water-soluble conjugated polymers (CPs) onto the CoFe₂O₄@SiO₂ core-shell nanoparticles (NPs). First, magnetic CoFe₂O₄ nanoparticles were prepared as the magnetic core and coated with a SiO₂ shell to obtain a good dispersion in aqueous solution. Then the polyelectrolytes and cationic conjugated polymer PFV was assembled onto the surface of core-shell nanoparticles by the LbL technique. The prepared nanocomposites were magnetically responsive and fluorescent, simultaneously. Finally, the biomacromolecule heparin sodium (HS) was then assembled on the outer layer of the nanocomposite to provide a cytocompatible surface. The nanocomposites show monodispersity, good fluorescence and good biocompatibility that are useful for efficient cellular imaging. Moreover, the colloidal stability and the cellular uptake ability of the nanocomposition with HS layer were efficiently improved.     

meta-Substituted benzamide oligomers that complex mono-, di- and tricarboxylates: folding-induced selectivity and chirality

meta-Substituted arylamide trimer, pentamer and heptamer have been prepared from simple benzene-1,3-diamine, benzene-1,3-dicarboxylic acid, and 3-aminobenzoic acid units. 2D NOESY (1)H NMR experiments reveal that these flexible oligomers form folded conformations to complex di- and tricarboxylate anions of varying sizes and shapes in DMSO of high polarity, which is driven by multiple intermolecular N-H···O=C and C-H···O=C hydrogen-bonds between the amide and aromatic hydrogens of the oligomers and the carboxylate oxygens of the anions. Generally, tricarboxylate anions display an increased binding affinity compared with the dicarboxylate anions and the complexes formed by 1,3-benzenedicarboxylate anion are more stable than those formed by 1,2- or 1,4-benzenedicarboxylate anions. Circular dichroism experiments show that chiral glutamic acid dianion can induce the oligomers to produce chiral bias, leading to the formation of chiral supramolecular complexes.     

Binary fluids in planar nanopores: Adsorptive selectivity, heat capacity and self-diffusivity

Monte Carlo and molecular dynamics simulations are performed to study fluid adsorption of a two component fluid in slit pores of nanoscopic dimensions. The slit pores are immersed in a binary fluid bath, which is comprised of spherical molecules having a size ratio of 1.43, at constant temperature and composition. Pore width is varied to determine how the heat capacity and self-diffusion coefficient are linked to the composition and structure of the adsorbed fluid. In pores where the fluid structure is most pronounced, we observe: perfect (or near perfect) exclusion of one component by the other component, a heat capacity that rapidly oscillates and is of greater magnitude than in the fluid bath, and self-diffusion coefficients on the order of 10^–8 cm²/s. The behavior of the heat capacity and diffusion coefficients appears to arise from a near solid-like layering of OMCTS that occurs at certain favorable pore widths.     

Predicting self-assembly: from empirism to determinism

Self-assembly is one of the most important concepts of the 21st century. Strikingly, despite the rational design of molecules for biological and pharmaceutical applications is rather well established, only few are the attempts to formally refine predictions of self-assembly in material science. In the present tutorial review, we encompass some of the most significant efforts towards the systematic study of (thermodynamically stable) self-assembly. We discuss experimental and computer-simulated self-assembly events in hard-matter, soft-matter and higher symmetry architectures under the common framework of partition functions. In this framework, we endeavor to correlate state-of-the-art chemical design, programming and/or engineering of reversible (thermal and chemical equilibrium) self-assembly with knowledge of the underlying partition function landscape in a step towards quantitative predictions and ab initio molecular design.     

A combinatorial approach to study solvent-induced self-assembly of mixed poly(methyl methacrylate)/polystyrene brushes on planar silica substrates: effect of relative grafting density

This article reports the study of the effect of relative grafting densities of two polymer chains on solvent-induced self-assembly of mixed poly(methyl methacrylate) (PMMA)/polystyrene (PS) brushes through a combinatorial approach. Gradient-mixed PMMA/PS brushes were synthesized from a gradient-mixed initiator-terminated monolayer by combining atom transfer radical polymerization (ATRP) and nitroxide mediated radical polymerization (NMRP) in a two-step process. The gradient-mixed initiator-terminated monolayer was fabricated by first formation of a gradient in density of an ATRP initiator through vapor diffusion followed by backfilling of an NMRP-initiator-terminated trichlorosilane. After treatment of a gradient-mixed brush whose PS Mn was slightly lower than that of PMMA with glacial acetic acid, a selective solvent for PMMA, relatively ordered nanodomains were observed in the region where the ratio of PS to PMMA grafting density (number of polymer chains/nm2) was in the range from 0.67 to 2.17 and the overall grafting density was approximately 0.85 polymer chains/nm2. Contact angle hysteresis were high (> or =40 degrees ) in this region and XPS studies confirmed that the PMMA chains were enriched at the outermost layer. The nanodomains are speculated to be of a micellar structure with PS chains forming the core shielded by PMMA chains.     

Two strategies for the self-assembly of gold nanoparticles: Photoreaction and radical reaction

Poly(N-isopropylacrylamide)-b-poly(vinylpyridine) (PNIPAAm-b-PVP) and poly(N-isopropylacrylamide-co-hydroxylethyl methacrylate)-b-poly(vinylphenol) (P(NIPAAm-co-HEMA)-b-PVPhol) were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. Above two copolymers could form complex in pure water and in DMF/water environment with the DMF content lower than 40% by hydrogen bondings. The morphologies of the complex were investigated by transmission electron microscope (TEM). It was found that the dimension of the complex in strong acid (pH 1.0) or base environment (pH 12.0) was smaller than the one in weak acid or in neutral environment. After the shell cross-linking of the complex, the complex showed a type of "swollen" state in acid or base environment which is similar to the properties of microgel.     

Supramolecular gold nanoparticles for the redox recognition of oxoanions: syntheses, titrations, stereoelectronic effects, and selectivity

Stable, CH(2)Cl(2)-soluble mixed dodecanethiol/(amidoferrocenyl)alkanethiol (AFAT) gold colloids were synthesized by ligand substitution reactions from Brust's dodecanethiol gold colloids and the AFAT ligands to study the recognition and titration of oxoanions. Gold colloids were obtained with various chain lengths (C(11) and C(6) chains) of the AFAT ligand and different proportions of AFAT ligands in the colloids. Modification of the amidoferrocenyl structure [replacement of the free C(5)H(5) ferrocene ring by C(5)Me(5) (Cp) or C(5)H(4)COCH(3)] has been achieved to investigate the stereoelectronic effects on the recognition. The cyclic voltammetry of these colloids in CH(2)Cl(2) on Pt electrode shows a reversible Fe(II/III) wave with some adsorption. With AFAT ligands, a new, less electrochemically reversible wave (with some adsorption) at a potential 220 +/- 20 mV less positive than that of the initial wave appears upon titration of [n-Bu(4)N][H(2)PO(4)], and the initial wave completely disappears after addition of 1 equiv of anion, which allows its titration. The potential shift does not depend on the AFAT proportion nor on its chain length but is reduced with Cp and enhanced with C(5)H(4)COCH(3), showing the key role of the hydrogen bonding between the -NH-amido group and a terminal oxygen atom of the oxoanions. According to the Echegoyen-Kaifer model, the potential shift leads to the ratio K((+))/K((0)) of apparent association constants. In the presence of both [n-Bu(4)N][HSO(4)] and [n-Bu(4)N]Cl, a shift of the initial wave (rather than its replacement) allows an easy titration, ideally with 20-Fc. Upon addition of [n-Bu(4)N][HSO(4)] alone, a weak wave shift (30 mV) of the colloids is also observed, allowing the titration of the HSO(4)(-) anion by the colloids containing a low percentage of AFAT ligand. The Echegoyen-Kaifer model provides access to the apparent association constant K((+)) in this case for which the interaction between the anion and the neutral form of the host is not significant. With the C(5)H(4)COCH(3) modification of the amidoferrocenyl branch, a new wave appears at a potential 70 mV more positive than the initial wave, signifying a stronger interaction with this modified ligand than with the parent AFAT ligand. These colloids favorably compare with ferrocenyl dendrimers in terms of rapid synthesis and selectivity of H(2)PO(4-) over HSO(4-) and with gold surfaces for the recognition of HSO(4)(-).     

A controlled and reproducible pathway to dye-tagged, encapsulated silver nanoparticles as substrates for SERS multiplexing

Silver nanoparticles tagged with dyes and encapsulated within a silica layer, offer a convenient potential substrate for performing multiplexed surface-enhanced Raman scattering (SERS) analysis. In contrast to our earlier work with gold particles, aggregation of silver particles is found to be mostly independent of dye addition, allowing for a reproducible preparation in which aggregation is actively induced by the addition of NaCl. Separating the aggregation step eliminates competitive binding between the dyes and silica-coating reagents, enabling the efficient use of a wide variety of weakly binding dyes to conveniently generate robust, high-intensity SERS substrates at a variety of excitation frequencies.