甲醇在Pt (100)表面吸附与解离的第一性原理研究.

采用基于第一性原理的密度泛函理论结合周期模型方法对甲醇在Pt(100)完整表面的吸附与解离进行了研究. 通过比较不同吸附位置的吸附能与构型参数发现,表面top吸附位为最稳定吸附位,甲醇分子通过氧原子吸附于Pt(100)表面. 同时计算了甲醇分子在top吸附位可能的解离路径,发现在解离过程中OH键首先断裂的路径为最低能量路径. 分解生成的若干产物其吸附稳定性排序为CH₃O>CH₂OH>CH₃>CH₂O.     

气体分子在Co-BN表面吸附的第一性原理研究

采用包含色散力校正的密度泛函理论(DFT-D)方法系统地研究了气体分子(O2, H2, NO, CO, CO2, SO2, H2S, H2O)在Co掺杂单层BN(Co-BN)表面的吸附, 分析了吸附小分子的几何结构, 吸附能, 电荷转移等情况. 结果表明: 1) CO等气体分子主要吸附在Co及其近邻六元环的顶位, 吸附结构的电荷转移表明掺杂原子Co对BN衬底的气敏特性有较好的调制作用; 2) 在Co-BN表面吸附的O2和CO较易被活化, 表明Co-BN可能是一种对CO氧化有较好催化活性的新型催化材料.     

三氧化钨表面氢吸附机理的第一性原理研究

采用基于密度泛函理论的第一性原理平面波超软赝势方法,在广义梯度近似下,研究了立方WO_3,WO_3(001)表面结构及其氢吸附机理.计算结果表明立方晶体WO_3理论带隙宽度为0.587 eV.WO_3(001)表面有WO终止(001)表面和O终止(001)表面两种结构,表面结构优化后W—O键长和W—O—W键角改变,从而实现表面弛豫;WO终止(001)表面和O终止(001)表面分别呈现n型半导体特征和p型半导体特征.分别计算了H原子吸附在WO终止(001)表面和O终止(001)表面的H—O_(2c)—H,H—O_(2c)…H—O_(2c),H—O_(1c)—H和H—O_(1c)…H—O_(1c)四种吸附构型,其中H—O_(1c)—H吸附构型的吸附能最小,H—O键最短,H失去电子数最多,分别为-3.684 eV,0.0968 nm和0.55e,此吸附构型最稳定.分析其吸附前后的态密度,带隙从吸附前的0.624 eV增加到1.004 eV,价带宽度基本不变.H的1s轨道电子与O的2p,2s轨道电子相互作用,在-8和-20 eV附近各形成了一个较强的孤立电子峰,两个H原子分别与一个O_(1c)原子形成化学键,最终吸附反应生成了一个H_2O分子,同时产生了一个表面氧空位.     

S在Pt皮肤Pt3Ni(111)面吸附的第一性原理研究

采用基于密度泛函理论的第一性原理方法,计算并分析了S原子在 Pt皮肤Pt3Ni(111)面不同位置的吸附特性.结果表明：S原子在Pt皮肤Pt3Ni的fcc位吸附最强,吸附能为5. 49 eV;与S原子在纯净Pt(111)表面的吸附相比,S原子在Pt皮肤Pt3Ni表面相应吸附位置的吸附能变小、与近邻的Pt原子形成的S-Pt键变长,表明掺杂的Ni会减小相应位点S原子的吸附能,降低体系对S原子的吸附能力,进而减弱S吸附对体系催化能力的影响;态密度分析发现, S原子的吸附使得Pt基催化剂的催化活性降低,主要是S的2p电子引起的;这些结果将为后续研究Pt基合金电极抗S中毒效果以及探究S原子吸附后Pt3Ni的活性位提供依据.     

碱金属在石墨烯表面吸附,迁移行为的第一性原理研究

利用基于密度泛函理论的第一性原理方法计算了3种碱金属(Li,Na,K)在石墨烯表面的吸附性质,迁移行为和电学性质.结果表明:3种碱金属在石墨烯表面的最稳定吸附位都是H位;吸附过程中电荷由碱金属原子向石墨烯片层转移.Li→Na→K,吸附能先减小再增大,吸附的强弱顺序为Li-石墨烯体系K-石墨烯体系Na-石墨烯体系;体系的离子性逐渐增强;碱金属原子在石墨烯表面的迁移激活能逐渐降低,迁移行为更容易实现.     

碱金属在石墨烯表面吸附，迁移行为的第一性原理研究

利用基于密度泛函理论的第一性原理方法计算了3种碱金属（Li,Na,K）在石墨烯表面的吸附性质,迁移行为和电学性质。结果表明：3种碱金属在石墨烯表面的最稳定吸附位都是H位;吸附过程中电荷由碱金属原子向石墨烯片层转移。Li→Na→K,吸附能先减小再增大,吸附的强弱顺序为Li−石墨烯体系强于K −石墨烯体系和Na−石墨烯体系;体系的离子性逐渐增强;碱金属原子在石墨烯表面的迁移激活能逐渐降低,迁移行为更容易实现。     

碱金属在石墨烯表面吸附，迁移行为的第一性原理研究

利用基于密度泛函理论的第一性原理方法计算了3种碱金属（Li,Na,K）在石墨烯表面的吸附性质,迁移行为和电学性质。结果表明：3种碱金属在石墨烯表面的最稳定吸附位都是H位;吸附过程中电荷由碱金属原子向石墨烯片层转移。Li→Na→K,吸附能先减小再增大,吸附的强弱顺序为Li−石墨烯体系强于K −石墨烯体系和Na−石墨烯体系;体系的离子性逐渐增强;碱金属原子在石墨烯表面的迁移激活能逐渐降低,迁移行为更容易实现。     

SnPc在Ag(111)表面吸附特性的第一性原理研究

采用第一性原理研究了SnPc分子在Ag(111)表面的吸附构型和电子结构. Sn-up和Sn-down两种优化的吸附构型与实验测量结果非常吻合,SnPc以Sn-down构型吸附在Ag(111)表面显得更稳定. Sn原子在两种吸附构型之间转换所需要能量与转换方向有关,由Sn-up向Sn-down构型转换时需翻越一个1.68 eV的能垒,反之需要2.17 eV. 扫描隧道显微镜理论模拟图像给出实验观测结果的主要特征,Sn-up分子的中心处为一个亮斑,而Sn-down分子中心为一个空洞. 计算结果验证了实验提出的Sn原子吸附位置的转换机理.     

ZnO 极性表面及其N原子吸附机理的第一性原理研究

基于密度泛函理论的第一性原理赝势法计算了ZnO极性表面的几何结构和电子结构特性,对比分析了ZnO(0001)和ZnO(0001)表面结构弛豫、能带结构、电子态密度及N吸附ZnO极性表面的形成能情况.计算结果表明: 相对于ZnO(0001)表面,ZnO(0001)表面受结构弛豫影响更加明显,而ZnO(0001)表面完整性更好.相对于体相ZnO结构,ZnO(0001)表面的能带带隙变窄,同时价带顶附近能级非局域性增强使晶体表面的导电性能变得更好;而ZnO(0001)表面的能带带隙变宽,由于O^{-关键词： 密度泛函理论 第一性原理 ZnO极性表面 N吸附}     

含Nb或Ge的锆合金表面氧吸附行为的第一性原理研究

采用基于密度泛函理论的第一性原理方法, 研究了纯锆表面和含Nb或Ge锆合金表面上氧的吸附性质. 结果表明, Nb和Ge对Zr(0001), (1120)和(1010)表面吸附性质的影响各不相同. 根据计算得到的偏聚能结果, Nb和Ge迁移到Zr(0001)表面比迁移到其他两个表面更容易, 而Nb和Ge 都可以降低Zr(0001)表面对氧原子的吸附能力, 因此这两种元素都能抑制锆合金的初始氧化. 进一步的电子结构分析发现, Nb和Ge改变表面对氧原子的吸附能力是通过改变表面d能带的分布来实现的.     

CO adsorption and dissociation on iron oxide supported Pt particles

We studied CO adsorption on Pt particles deposited on well-ordered Fe₃O₄(1 1 1) thin films grown on Pt(1 1 1) by temperature programmed desorption (TPD). A highly stepped Pt(1 1 1) surface produced by ion sputtering and annealing at 600 K was studied for comparison. Structural characterization was performed by scanning tunneling microscopy and Auger electron spectroscopy. The TPD spectra revealed that in addition to the desorption peaks at ∼400 and 480 K, assigned to CO adsorbed on Pt(1 1 1) facets and low-coordination sites respectively, the Pt nanoparticles annealed at 600 K exhibit a desorption state at ∼270 K. This state is assigned to initial stages of strong metal support interaction resulting in partial Fe-Pt intermixing. On both Pt/Fe₃O₄(1 1 1) and stepped Pt(1 1 1) surfaces CO is found to dissociate at 500 K. The results suggest that CO dissociation and carbon accumulation occur on the low-coordinated Pt sites.     

NO adsorption and diffusion on unreconstructed Pt{1 0 0} surface. A density functional theory investigation

Ab initio density functional theory was used to investigate the adsorption and diffusion of a single NO molecule on the unreconstructed Pt{1 0 0}-(1 × 1) surface. To our knowledge this is the first theoretical study of the NO diffusion activation energy on the Pt{1 0 0} surface. The most stable adsorption position for NO corresponds to the bridge site with the axis of the molecule perpendicular to the surface. The bond of the NO molecule to the surface is through the N-atom. We found that there is a low adsorption energy when the NO molecule is bonded through the O-atom and the axis is perpendicular to the surface, for the three high symmetry sites investigated. NO diffusion between bridge-hollow sites, bridge-atop sites, and hollow-atop sites was also investigated. The barrier for NO diffusion is 0.41 eV, which corresponds to the energy difference between the bridge and hollow sites. This value is around 15% of the highest adsorption energy found on this surface. NO stretch frequencies are also calculated for the three high symmetry sites investigated.     

Pt/N-codoped TiO2 nanotubes and its photocatalytic activity under visible light

Pt/N-codoped TiO₂ nanotubes were prepared and characterized by various analytical methods, such as transmission electron microscope (TEM), diffuse reflection spectra (DRS), X-ray powder diffraction (XRD), X-ray photoelectron emission spectroscopy (XPS) and fluorescence spectra (FL). The photocatalytic efficiency was evaluated by the photodegradation of Rhodamine B (RB) in an aqueous solution under visible light irradiation. It has been confirmed that Pt/N-codoped TiO₂ nanotubes could be excited by visible light and the recombination rate of electron-hole pairs declined significantly. The higher visible light activity is due to the codoping of nitrogen and platinum.     

Hydrogen adsorption on Pt-decorated closed-end armchair (3,3), (4,4) and (5,5) single-walled carbon nanotubes

ABSTRACT

Structures of small lengths of capped (3,3), (4,4) and (5,5) single-walled carbon nanotubes (SWCNTs) and their structures decorated by Pt atom and Pt_n clusters (n = 2–4) were obtained using density functional theory calculations. Binding abilities of Pt atom and Pt_n clusters on the outer surface of SWCNTs at various adsorption sites were explored. Adsorptions of H₂ onto Pt atom of the Pt-decorated (3,3), (4,4) and (5,5) SWCNTs were studied and their adsorption energies are reported. The thermodynamic properties and equilibrium constants for H₂ adsorptions on the Pt₄-decorated (3,3), (4,4) and (5,5) SWCNTs were obtained. The adsorption of H₂ on the Pt atom of the Pt₄/(3,3) SWCNT was found to be the most preferred reaction of which enthalpy and free energy changes at room temperature are ?46.61 and ?23.99 kcal/mol, respectively.     

单原子Pt吸附于不同原子暴露终端BiOBr{001}面的第一性原理研究

基于密度泛函理论(density functional theory, DFT)的第一性原理方法研究了暴露不同原子终端的BiOBr{001}表面以及单原子Pt吸附于BiOBr{001}-BiO不同位置的几何构型、电子结构、光学性质和电荷转移.计算结果表明:BiOBr{001}面BiO终端暴露可诱导产生表面态且价带和导带能级向低能方向移动,光氧化性增强,尤其导带下方出现的表面态能级有助于光生电子-空穴对的分离和迁移,光吸收显著增强,且BiOBr{001}面BiO终端的功函数远低于贵金属Pt,有利于电荷定向转移.其次,单原子Pt吸附于BiOBr{001}-BiO为基底的表面,在禁带中间诱导产生杂质能级, Pt吸附于穴位时吸附能最小,光响应能力最好且电荷转移量最大,吸附于顶位和桥位时,形成开放性的贫电子区域,因此可预测穴位为Pt原子的吸附位点,预示其良好的降解有机污染物效果, Pt吸附于BiOBr{001}-BiO的顶位和桥位,具有潜在的CO_2还原或固氮等领域应用.     

Anomalous adsorption of Cs on Pt(1 1 1)

The adsorption of Cs on Pt(1 1 1) surfaces and its reactivity toward oxygen and iodine for coverages θ_Cs?0.15 is reported. These surfaces show unusual “anomalous” behavior compared to higher coverage surfaces. Similar behavior of K on Pt(1 1 1) was previously suggested to involve incorporation of K into the Pt lattice. Despite the larger size of Cs, similar behavior is reported here. Anomalous adsorption is found for coverages lower than 0.15 ML, at which point there is a change in the slope of the work function. Thermal Desorption Spectroscopy (TDS) shows a high-temperature Cs peak at 1135 K, which involves desorption of Cs⁺ from the surface.The anomalous Cs surfaces and their coadsorption with oxygen and iodine are characterized by Auger Electron Spectroscopy (AES), TDS and Low Electron Energy Diffraction (LEED). Iodine adsorption to saturation on Pt(1 1 1)(anom)-Cs give rise to a sharp LEED pattern and a distinctive work function increase. Adsorbed iodine interacts strongly with the Cs and weakens the Cs-Pt bond, leading to desorption of Cs_xI_y clusters at 560 K. Anomalous Cs increases the oxygen coverage over the coverage of 0.25 ML found on clean Pt. However, the Cs-Pt bond is not significantly affected by coadsorbed oxygen, and when oxygen is desorbed the anomalous cesium remains on the surface.     

Impact of potassium on the heats of adsorption of adsorbed CO species on supported Pt particles by using the AEIR method

The heats of adsorption at several coverages of the linear and bridged CO species (denoted L and B, respectively) adsorbed on the Pt⁰ sites of the 2.9 wt% Pt/10% K/Al₂O₃ catalyst are determined using the Adsorption Equilibrium Infrared spectroscopy method. The addition of K on 2.9% Pt/Al₂O₃ modifies significantly the adsorption of CO on the Pt particles: (a) the ratio L/B is decreased from 8.4 to 1, (b) a new adsorbed CO species is detected with an IR band at 1763 cm⁻¹, (c) the heats of adsorption of L and B CO species are significantly altered and the positions of their IR bands are shifted. The heats of adsorption of L CO species are decreased: i.e. 206 and 105 kJ/mol at low coverages on Pt/Al₂O₃ and Pt/K/Al₂O₃ respectively. Two B CO species denoted B1 and B2, with different heats of adsorption are observed on Pt/K/Al₂O₃. The heats of adsorption of B2 CO species (major B CO species) are significantly larger than those measured in the absence of K: i.e. 94 and 160 kJ/mol at low coverages on Pt/Al₂O₃ and Pt/K/Al₂O₃ respectively, whereas those of B1 CO species (minor species) are similar: 90 kJ/mol at low coverages. These values are consistent with the qualitative High Resolution Electron Energy Loss Spectrometry literature data on Pt(1 1 1) modified by potassium.     

掺杂硅烯吸附CO分子的第一性原理研究

硅烯具有独特的电子、光学、热学、力学以及量子特性,在电子器件、电极材料、储氢材料、催化剂和气体传感器等领域有巨大的潜在应用价值.本文采用基于密度泛函理论的第一性原理计算方法,利用Materials Studio软件中的CASTEP程序包对硅烯与CO分子之间的吸附行为进行了研究.重点研究了硅烯掺杂方式、CO分子吸附构型及硅烯空位缺陷浓度对CO分子吸附的影响,研究结果表明：1)空位缺陷硅烯对CO分子的吸附能力最强;2)碳原子垂直朝向空位缺陷硅烯更有利于CO分子的吸附;3)硅烯对CO分子的吸附能力随其空位浓度的增加显著增强;4)空位硅烯向CO分子转移电荷,电荷转移量与二者的吸附作用强弱呈正相关.该研究可为硅烯基CO气体传感器的设计提供理论指导.     

第一性原理研究氧在Ni(111)表面上的吸附能及功函数

采用基于密度泛函理论（DFT）广义梯度近似（GGA）下的第一性原理方法系统地研究了不同覆盖度下O在Ni（111）表面的吸附特性.计算结果表明,O在Ni（111）表面的稳定吸附位为三重面心立方（fcc）洞位,吸附能随着覆盖度的增加而减小,O诱导Ni（111）表面功函数的变化量与覆盖度成近线性关系,并随着覆盖度的增加而增大.同时,通过对电子密度和分波态密度的分析发现：O在Ni（111）表面的吸附使得Ni表面电子向O原子转移,形成表面偶极矩,导致功函数增加;表面Ni原子的3d轨道和O的2p轨道通过耦合、杂化作用形成成键态和反键态,而反键态几乎不被占据,因而O—Ni键相互作用比较强,吸附能较大. 关键词： 表面吸附 密度泛函理论 吸附能 功函数