Synthesis and ‘double click’ density functionalization of 8-aza-7-deazaguanine DNA bearing branched side chains with terminal triple bonds

The 7-[di(prop-2-ynl)amino]prop-1-ynyl derivative of 8-aza-7-deaza-2′-deoxyguanosine (1) was synthesized from 7-iodo-8-aza-7-deaza-2′-deoxyguanosine (7) by Sonogashira cross-coupling and converted into the phosphoramidite building block 10. Oligonucleotides bearing branched side chains with terminal triple bonds were prepared by solid-phase synthesis containing single or multiple residues of 1 as 2′-deoxyguanosine surrogates. T_m measurements demonstrate that compound 1 has a positive effect on duplex stability, which is comparable to the stabilizing effect of the octa-1,7-diynylated non-branched nucleoside 2. Nucleoside 1 and corresponding oligonucleotides were functionalized by the Cu(I)-mediated 1,3-dipolar cycloaddition ‘double click’ reaction with diverse ligands (AZT 3, benzyl azide 4, 11-azidoundecanol 5 and m-dPEG™₄-azide 6). The conjugation reactions were carried out in solution and on solid support. Nucleoside 1 allowed ‘double’ functionalization of a single residue with two reporter groups. The ‘double click’ reaction proceeded smoothly even when two residues of nucleoside 1 were arranged in proximal positions. Hybridization with complementary strands led to a stable oligonucleotide duplex. Molecular modeling indicates that inspite of the crowded steric situation with four AZT ligands within closest proximal positions, all ligands are well accommodated in the major groove not disturbing the DNA helix.     

Non-C2-symmetrical antimony-phosphorus ligand, (R/S)-2-diphenylphosphano-2′-di(p-tolyl)stibano-1,1′-binaphthyl (BINAPSb): preparation and its use for asymmetric reactions as a chiral auxiliary

A new non-C₂-symmetrical antimony-phosphorous ligand, (±)-2-diphenyl-phosphano-2′-di(p-tolyl)stibano-1,1′-binaphthyl (BINAPSb) 3, has been prepared from 2-bromo-2′-diphenylphosphano-1,1′-naphthyl 4 via its borane complex 6, and could be resolved by the separation of a mixture of the diastereomeric palladium complexes 8A and 8B derived from the reaction of (±)-3 with optically active palladium reagent (S)-7. The enantiomerically pure BINAPSb 3 has proved to be highly effective in the palladium-catalyzed asymmetric hydrosilylation of styrene as a chiral auxiliary.     

Regioselective monobromination of (E)-1-(2′-hydroxy-4′,6′-dimethoxyphenyl)-3-aryl-2-propen-1-ones using bromodimethylsulfonium bromide and synthesis of 8-bromoflavones and 7-bromoaurones

A wide variety of monobrominated compounds 2a-l have been prepared in good yields from (E)-1-(2′-hydroxy-4′,6′-dimethoxyphenyl)-3-aryl-2-propen-1-ones (1a-l) through regioselective ring bromination using 1.5 equiv of bromodimethylsulfonium bromide (BDMS) at room temperature. Similarly, some of the 2′-hydroxychalcones can be converted directly into tribromides 3 or dibromides 4 by employing 4.0 equiv of BDMS under different reaction conditions which in turn can be transformed into 8-bromoflavones and 7-bromoaurones on treatment with 0.2 M ethanolic KOH solution. Mild reaction conditions, good yields and no chromatographic separation are some of the salient features of the present protocol.     

Synthesis of sulfur containing analogues of the soluble guanylate cyclase inhibitor 8-bromo-4H-[1,2,4]oxadiazolo[3,4-c][1,4]benzoxazin-1-one NS2028

Sulfur analogues of the soluble guanylate cyclase (sGC) inhibitor NS2028 1a are synthesized. Treating 8-bromo-2H-benzo[b][1,4]oxazin-3(4H)-one oxime (6) with 1,1′-thiocarbonyldiimidazole (1.1 equiv) gave the carbamothioate 8-bromo-4H-[1,2,4]oxadiazolo[3,4-c][1,4]benzoxazine-1-thione (3a) in 83% yield. Alternatively reacting NS2028 1a with P₂S₅ (0.5 equiv) affords the carbamothioate 3a in 80% yield. Similar treatment of 8-aryl substituted NS2028 analogues 1b-d with P₂S₅ gave the carbamothioates 3b-d in 64-91% yields. Although quite stable, the carbamothioates 3a-d could be thermally isomerized in the presence of Cu (10 mol %) to afford the thiocarbamates 4a-d in high yields. Interestingly, in the case of carbamothioate 3a Pd and In metals also facilitated the isomerization. Furthermore, treatment of the thiocarbamates 4a-d with P₂S₅ (0.5 equiv) affords the carbamodithioates 5a-d in 72-89% yields. All new compounds are fully characterized including single crystal X-ray data for carbamothioate 3a and thiocarbamate 4a. Finally, a mechanism is proposed for the carbamothioate to thiocarbamate isomerization.     

7-Deaza-2,8-diazaadenine containing oligonucleotides: synthesis, ring opening and base pairing of 7-halogenated nucleosides

Oligonucleotides containing 7-bromo-7-deaza-2,8-diaza-2′-deoxyadenosine (3) and 5-amino-3-bromo-4-carbamoyl-1-(2′-deoxy-β-d-erythro-pentofuranosyl)pyrazole (4) were synthesized. Compound 3 was prepared from 7-bromo-8-aza-7-deaza-2′-deoxyadenosine (5) via the 1,N⁶-etheno derivative 6 and was converted into the phosphoramidite 11. The 7-bromo substituent of 3 increases oligonucleotide duplex stability compared to the non-halogenated nucleoside. Oligonucleotides incorporating 3 are transformed to those containing 4 during long time deprotection at elevated temperature (25% aq ammonia, 60 °C, 30 h). Compound 3 forms a strong base pair with dG. The base pair stability decreases in the order dG>dT>dA>dC. Similar recognition selectivity is observed for the pyrazole nucleoside 4, however, due to decreased stacking and higher flexibility of the pyrazole moiety, duplexes are less stable than those containing 3.     

Cyclization reaction of cyclopentadienone with prop-2-yn-1-ol in priority to Diels-Alder reaction

2,5-Bis(methoxycarbonyl)-3,4-diphenylcyclopentadienone (1a) reacts with prop-2-yn-1-ols (2) to give 3-methylene-2,3,3a,6a-tetrahydrocyclopenta[b]furan-4-one derivatives in the presence of trialkylamines.     

The counterion influence on the CH-activation of methane by palladium(II) biscarbene complexes - structures, reactivity and DFT calculations

Novel bridged palladium(II) biscarbene complexes with different counterions are reported: 1,1^′-dimethyl-3,3^′-methylene-4-diimidazolin-2,2^′-diylidene palladium(II) bischloride (1) and bis(trifluoroacetate) (2) have been synthesized in good yields. Both complexes are active in the catalytic conversion of methane to methanol and show comparable activities to previously published NHC-catalysts. The results of the single-crystal X-ray structure determination of 1,1^′-dimethyl-3,3^′-methylene-4-diimidazolin-2,2^′-diylidene palladium(II) bischloride (1) and 1,1^′-dimethyl-3,3^′-methylene-4-diimidazolin-2,2^′-diylidene palladium (II) bis(trifluoro-acetate) 2 confirmed the structural similarity to the known corresponding palladium bromide and iodide complexes. Since free 1,1^′-dimethyl-R-3,3^′-methylene-4-diimidazolin-2,2^′-diylidene are only available in low yields these compounds have been synthesized via the bromide complex, exchanging the counterion by AgCF₃COO or by exchanging the counterion of the imidazolium salt by NH₄PF₆.     

Efficient synthesis of brominated tetrathiafulvalene (TTF) derivatives: solid-state structure and electrochemical behaviour

An efficient synthesis is reported for 4,5-dibromo-[1,3]dithiole-2-thione (1) and 4-bromo-1,3-dithiole-2-thione (7) by bromination of lithiated vinylene trithiocarbonate. Compound 1 acts as a convenient precursor to a number of asymmetric electron donors. This is exemplified by the formation of 4,5-dibromo-4′,5′-bis(2′-cyanoethylsulfanyl)TTF (3) by cross-coupling methodology and subsequent conversion into 4,5-dibromo-4′,5′-ethylenedithioTTF (4) by reaction with caesium hydroxide and 1,2-dibromoethane. The new donor 4,5-dibromo-4′,5′-ethylenedithiodiselenadithiafulvalene (5) was prepared by cross-coupling of 1 and 4,5-ethylenedithio-1,3-diselenol-2-one (6). The X-ray structures of 3 and 5 are reported.     

The synthesis of R-3-alkoxy-1-(1′-hydroxyethyl)-4-methoxy-2-(1″-propenyl)benzenes utilizing Corey-Bakshi-Shibata asymmetric reductions

Pyrolysis of the 3-O-allyl derivative 7 of isovanillin followed by alkylation of the derived allylphenol 8 afforded a series of benzaldehyde derivatives 9-11 each of which was transformed by initial treatment with methylmagnesium bromide followed by oxidation of the corresponding alcohols with activated manganese dioxide into a series of ketones 15-17. Palladium(0) catalysed isomerization of the double bond in the prop-2′-enyl side-chain afforded ketones 36-38 which were subjected to the Corey-Bakshi-Shibata asymmetric reduction protocol to afford the R-3-alkoxy-1-(1′-hydroxyethyl)-4-methoxy-2-(1″-propenyl) benzenes 42-44 in yields of approximately 60% and with ee's of 75%.     

Synthesis of a solvent-sensitive highly fluorescent derivative of perfluorocyclopentene

A solvent-sensitive highly fluorescent compound, N-[2-(1′,3′,4′,4′,5′,5′-hexafluorocyclopentenyl)]-4-(5-methoxy-thiazolyl)pyridine (1D) was synthesized as an unexpected product of the reaction of 4-bromo-5-methoxy-2-(4-pyridyl)thiazole (1B) with perfluorocyclopentene in the presence of n-BuLi. Primary mechanism of this reaction was proposed, and the photophysical properties of 1D in different solvents were studied.     

Cationoid rearrangements in reactions of perfluoro-1-arylbenzocyclobutenes with antimony pentafluoride

In the presence of antimony pentafluoride at 130 °C, the four-membered ring of perfluoro-1-(2-ethylphenyl)benzocyclobutene (2) undergoes cleavage, forming perfluoro-2-ethyl-2′-methyldiphenylmethane (5). Compound 5 is converted, under the action of SbF₅ at 170 °C, to perfluoro-8,9-dimethyl-1,2,3,4-tetrahydrofluorene (8). Perfluoro-1-(4-ethylphenyl)benzocyclobutene (3) remains unchanged at 130 °C, whereas at 170 °C it gives a mixture of perfluorinated 4′-ethyl-2-methyldiphenylmethane (9), 6-ethyl-1,2,3,4-tetrahydroanthracene (11) and 2-ethyl-9,10-dihydroanthracene (12). When heated with SbF₅ at 170 °C, perfluoro-1-phenylbenzocyclobutene (1) remains unchanged. Solution of compounds 2, 3, 5 and 9 in SbF₅-SO₂ClF generated the perfluorinated 1-(2-ethylphenyl)-1-benzocyclobutenyl (29), 1-(4-ethylphenyl)-1-benzocyclobutenyl (30), 2-ethyl-2′-methyldiphenylmethyl (31) and 4′-ethyl-2-methyldiphenylmethyl (32) cations, respectively.     

The novel transition metal free synthesis of 1,1′-biazulene

Reaction of 1-azulenyl methyl sulfoxide (1) under acidic conditions gave the 1,1′-biazulene derivative 3. Methylmercapt groups of 3 were readily converted to formyl groups by Vilsmeier reaction to afford 3,3′-diformyl-1,1′-biazulene (4), which reacted with pyrrole in the presence of acetic acid to give the parent 1,1′-biazulene (5). Reaction of 5 with pyridine in the presence of Tf₂O gave 3,3′-dihydropyridyl-1,1′-biazulene derivative 6. 3,3′-(4-Pyridyl)-1,1′-biazulene (7) was obtained by the reaction of 3 with KOH in EtOH at room temperature in good yield.     

Trimetallic complexes containing 1,1′-Rc′(CC)2 units [Rc′ = ruthenocene-1,1′-diyl, Ru(η-C5H4-)2]

Reactions between 1,1′-(Me₃SiCC)₂Rc′ [Rc′ = ruthenocen-1,1′-diyl, Ru(η-C₅H₄-)₂] and RuCl(PP)Cp′ in the presence of KF gave 1,1′-{Cp(PP)RuCC}₂Rc′ [Cp′ = Cp, PP = PPh₃1, P(m-tol)₃2, dppe 3, dppf 4; Cp′ = Cp^∗, PP = dppe 5]. Compounds 1 and 2 react with tcne to give two diastereomers a/b of the allylic (vinylcarbene) complexes 6 and 7, while methylation of 5 gave the bis-vinylidene [1,1′-{Cp^∗(dppe)RuCCMe}₂Rc′](BPh₄)₂ (8). The X-ray structures of 4, 6b and 8 have been determined. Cyclic voltammograms indicate that there is some electronic communication between the ruthenium end-groups through the Rc′ centre.     

Microwave-assisted synthesis of novel bis(2-thioxothiazolidin-4-one) derivatives as potential GSK-3 inhibitors

(5Z,5′Z)-3,3′-(1,4-Phenylenebis(methylene)-bis-(5-arylidene-2-thioxothiazolidin-4-one) derivatives (5a-r) have been synthesized by the condensation reaction of 3,3′-(1,4- or 1,3-phenylenebis(methylene))bis(2-thioxothiazolidin-4-ones) (3a,b) with suitably substituted aldehydes (4a-f) or 2-(1H-indol-3-yl)2-oxoacetaldehydes (8a-c) under microwave conditions. The bis(2-thioxothiazolidin-4-ones) were prepared from the corresponding primary alkyl amines (1a,b) and di-(carboxymethyl)-trithiocarbonyl (2). The 2-(1H-indol-3-yl)-2-oxoacetaldehydes (8a-c) were synthesized from the corresponding acid chlorides (7a-c) using HSnBu₃.     

Synthesis and structural characterization of 1′-(diphenylphosphino)ferrocene-1-carboxamide, its corresponding hydrazide, some heterocycles derived from the hydrazide and palladium(II) complexes with these functional phosphinoferrocene ligands

Two polar phosphinoferrocene ligands, 1′-(diphenylphosphino)ferrocene-1-carboxamide (1) and 1′-(diphenylphosphino)ferrocene-1-carbohydrazide (2), were synthesized in good yields from 1′-(diphenylphosphino)ferrocene-1-carboxylic acid (Hdpf) via the reactive benzotriazole derivative, 1-[1′-(diphenylphosphino)ferrocene-1-carbonyl]-1H-1,2,3-benzotriazole (3). Alternatively, the hydrazide was prepared by the conventional reaction of methyl 1′-(diphenylphosphino)ferrocene-1-carboxylate with hydrazine hydrate, and was further converted via standard condensation reactions to three phosphinoferrocene heterocycles, viz 2-[1′-(diphenylphosphino)ferrocen-1-yl]-1,3,4-oxadiazole (4), 1-[1′-(diphenylphosphino)ferrocen-1-carbonyl]-3,5-dimethyl-1,2-pyrazole (5), and 1-[1′-(diphenylphosphino)ferrocene-1-carboxamido]-3,5-dimethylpyrrole (6). Compounds 1 and 2 react with [PdCl₂(cod)] (cod = η²:η²-cycloocta-1,5-diene) to afford the respective bis-phosphine complexes trans-[PdCl₂(L-κP)₂] (7, L = 1; 8, L = 2). The dimeric precursor [(L^NC)PdCl]₂ (L^NC = 2-[(dimethylamino-κN)methyl]phenyl-κC¹) is cleaved with 1 to give the neutral phosphine complex [(L^NC)PdCl(1-κP)] (9), which is readily transformed into a ionic bis-chelate complex [(L^NC)PdCl(1-κ²O,P)][SbF₆] (10) upon removal of the chloride ligand with Ag[SbF₆]. Pyrazole 5 behaves similarly affording the related complexes [(L^NC)PdCl(5-κP)] (12) and [(L^NC)PdCl(5-κ²O,P)][SbF₆] (13), in which the ferrocene ligand coordinates as a simple phosphine and an O,P-chelate respectively, while oxadiazole 4 affords the phosphine complex [(L^NC)PdCl(4-κP)] (11) and a P,N-chelate [(L^NC)PdCl(4-κ²N³,P)][SbF₆] (14) under similar conditions. All compounds were characterized by elemental analysis and spectroscopic methods (multinuclear NMR, IR and MS). The solid-state structures of 1⋅½AcOEt, 2, 7⋅3CH₃CN, 8⋅2CHCl₃, 9⋅½CH₂Cl₂⋅0.375C₆H₁₄, 10, and 14 were determined by single-crystal X-ray crystallography.     

The cyclopalladation reaction of 2-phenylaniline revisited

2-Phenylaniline reacted with Pd(OAc)₂ in toluene at room temperature for 24 h in a one-to-one molar ratio and with the system PdCl₂, NaCl and NaOAc in a 1 (2-phenylaniline):1 (PdCl₂):2 (NaCl):1 (NaOAc) molar ratio in methanol at room temperature for one week to give the dinuclear cyclopalladated compounds (μ-X)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}]₂ [1a (X = OAc) and 1b (X = Cl)] in high yield. Moreover, the reaction between 2-phenylaniline and Pd(OAc)₂ in one-to-one molar ratio in acid acetic at 60 °C for 4 h, followed by a metathesis reaction with LiBr, allowed isolation of the dinuclear cyclopalladated compound (μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}]₂ (1c) in moderate yield. A parallel treatment, but using monodeuterated acetic acid (DOAc) as solvent in the cyclopalladation reaction, allowed isolation of a mixture of compounds 1c, 1c_d1 [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄](μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)-3-d-C₆H₃] and 1c_d2 (μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)-3-d-C₆H₃}]₂ in moderate yield and with a deuterium content of ca. 60%. 1a and 1b reacted with pyridine and PPh₃ affording the mononuclear cyclopalladated compounds [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}(X)(L)] [2a (X = OAc, L = py), 2b (X = Cl, L = py), 3a (X = OAc, L = PPh₃) and 3b (X = Cl, L = PPh₃)] in a yield from moderate to high. Furthermore, 1a reacted with Na(acac) · H₂O to give the mononuclear cyclopalladated compound 4 [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}(acac)] in moderate yield. ¹H NMR studies in CDCl₃ solution of 2a, 2b, 3a, 3b and 4 showed that 2a and 3a presented an intramolecular hydrogen bond between the acetato ligand and the amino group, and were involved in a dynamic equilibrium with water present in the CDCl₃ solvent; and that the enantiomeric molecules of 2b and 4 were in a fast exchange at room temperature, while they were in a slow exchange for 2a, 3a and 3b. The X-ray crystal structures of 3b and 4 were determined. 3b crystallized in the triclinic space group with a = 9.9170(10), b = 10.4750(10), c = 12.0890(10) Å, α = 98.610(10)°, β = 94.034(10)° and γ = 99.000(10)° and 4 in the monoclinic space group P2₁/a with a = 11.5900(10), b = 11.2730(10), c = 12.2150(10) Å, α = 90°, β = 107.6560(10)° and γ = 90°.     

Controlled vinyl-addition-type polymerization of norbornene initiated by several cobalt complexes having substituted terpyridine ligands

A series of cobalt(II) complexes having terpyridine derivatives such as 2,2^′:6^′,2″-terpyridine (1), 4,4^′,4″-^tBu₃-2,2^′:6^′,2″-terpyridine (2), 5,5″-Me₂-2,2^′:6^′,2″-terpyridine (3), 6,6″-Me₂-2,2^′:6^′,2″-terpyridine (4) and 6,6″-(3,5-Me₂C₆H₃)₂-2,2^′:6^′,2″-terpyridine (5) was synthesized. The structures of 1, 3, and 4 were confirmed by X-ray crystallography. The coordination sphere around the cobalt center in 1 can be described as pseudo square pyramidal. On the other hand, complex 4 has pseudo trigonal bipyramidal structure. Upon activation with d-MAO (dried-methylaluminoxane), these complexes showed high activities for the polymerization of norbornene (NBE). In particular, polymerization of NBE with 4/d-MAO system at room temperature resulted in quantitative yield within several hours to give the polymers with relatively narrow molecular weight distributions and controlled molecular weight. The polymerizations of NBE with these cobalt catalyst systems proceeded in vinyl addition polymerization, which was confirmed by ¹H NMR spectra of the resulting polymers.     

Dinuclear double-helical cobalt complexes with two-armed terdentate ligands: Synthesis,structure and physical properties

Three ligands with flexible bis-terdentate coordination sites, di(2-pyridylcarbaldehyde)-6,6′-dicarboxylic acid hydrazone-2,2′-bipyridine (H₂L¹), di(2-acetylpyridyl)-6,6′-dicarboxylic acid hydrazone-2,2′-bipyridine (H₂L²) and di(2-pyridylketone)-6,6′-dicarboxylic acid hydrazone-2,2′-bipyridine (H₂L³) have been easily prepared. Dinuclear double-stranded helicates Co₂(L¹)₂(ClO₄)₂(C₂H₅OH)₂(H₂O)₂ (1), Co₂(HL²)(L²)(ClO₄)₃(C₂H₅OH)₂(H₂O)₂ (2) and Co₂(HL³)(L³)(ClO₄)₃(H₂O)₄ (3) based on the ligands, H₂L^1–3, respectively, have been obtained via self-assembly, their structures were determined by FT-IR, Elemental Analysis, ESI-MS and X-ray diffraction method.     

Arylation of β-methallyl alcohol catalyzed by Pd(OAc)2 in combination with P(t-Bu)3: application to fragrance synthesis

Pd(OAc)₂ in combination with P(t-Bu)₃ catalyzes the coupling of β-methallyl alcohol with 1-bromo-3,4-(methylenedioxy)benzene (1a), 1-bromo-4-methoxybenzene (1b), or 1-bromo-4-tert-butylbenzene (1c). The reaction affords the corresponding 2-methyl-3-aryl-propanals, which are valuable floral fragrances. With 1a or 1b high reaction rates are obtained at 130 °C using NMP/water mixtures and an inorganic base such as Na₂CO₃. The chemoselectivity of the reaction is almost complete, so that the process appears practically feasible. In contrast, the coupling of β-methallyl alcohol with 1c proceeds with low reaction rates.     

Synthesis,structural analysis,and thermal and spectroscopic studies of methylmalonate-containing zinc(II) complexes

The synthesis, crystal structure, thermal analysis and spectroscopic studies of five zinc(II) complexes of formulae [Zn(Memal)(H₂O)]_n (1) and [Zn₂(L)(Memal)₂(H₂O)₂]_n (2-5) [H₂Memal = methylmalonic acid, and L = 4,4′-bipyridine (4,4′-bpy) (2), 1,2-bis(4-pyridyl)ethylene (bpe) (3), 1,2-bis(4-pyridyl)ethane (bpa) (4) and 4,4′-azobispyridine (azpy) (5)] are presented here. The crystal structure of 1 is a three-dimensional arrangement of zinc(II) cations interconnected by methylmalonate groups adopting the μ₃-κ²O:κO’:κO”:κO”’ coordination mode to afford a rare (10,3)-d utp-network. The structures of the compounds 2-5 are also three-dimensional and they consist of corrugated square layers of methylmalonate-bridged zinc(II) ions which are pillared by bis-monodentate 4,4′-bpy (2), bpe (3), bpa (4) and azpy (5) ligands. The Memal ligand in 2-5 adopts the μ₃-κO:κO′:κO′′:κO′′′ coordination mode. Each zinc(II) ion in 1-5 is six-coordinated with five (1)/four (2-5) methylmalonate-oxygen atoms, a water molecule (1-5) and a nitrogen atom from a L ligand (2-5) building distorted octahedral environments. The rod-like L co-ligands in 2-5 appear as useful tools to control the interlayer metal-metal separation, which covers the range 8.4311(5) Å (2) – 9.644(3) Å (5). The influence of the co-ligand on the fluorescence properties of this series of compounds has been analyzed and discussed by steady-state and time resolved spectroscopy on all five compounds in the solid state.