Moxifloxacinium chloride–water–methanol (2/1/1), a novel anti­bacterial agent

Moxifloxacin, a novel fluoro­quinolone with a broad spectrum of anti­bacterial activity, is available as the solvated monohydro­chloride salt 7‐[(S,S)‐2‐aza‐8‐azoniabicyclo­[4.3.0]non‐8‐yl]‐1‐cyclo­propyl‐6‐fluoro‐8‐meth­oxy‐4‐oxo‐1,4‐dihydroquinoline‐3‐carboxylic acid chloride–water–methanol (2/1/1), C₂₁H₂₅FN₃O₄⁺·Cl⁻·0.5H₂O·0.5CH₃OH. The asymmetric unit contains two cations, two chloride ions, a mol­ecule of water and one methanol mol­ecule. The two cations adopt conformations that differ by an almost 180° rotation with respect to the piperidinopyrrolidine side chain. The cyclo­propyl ring and the meth­oxy group are not coplanar with the quinoline ring system. The carboxylic acid function, the protonated terminal piperidyl N atom, the water mol­ecule, the chloride ion and the methanol mol­ecule participate in O—H⋯O, O—H⋯Cl, N—H⋯O and N—H⋯Cl hydrogen bonding, linking the mol­ecules into extended two‐dimensional networks.     

The A Πu-X Πg emission spectrum of I2

The A ²Π_u-X ²Π_g electronic emission spectrum of I₂⁺ has been recorded at a low rotational temperature in a crossed molecular beam/electron beam apparatus. Six vibrational sequences with five or more members have been assigned to progressions in ν′, giving ω′_e = 122±8 cm⁻¹, but a full vibrational analysis has not been possible. It is not known whether this is due to the relatively poor resolution (≈5 cm⁻¹) at which the spectrum has been recorded or because the A ²Π_u state is perturbed in one or both spin-orbit components. Existing data on the A state of I₂⁺ are reviewed.     

Sauroine—a novel Lycopodium alkaloid from Huperzia saururus

A novel Lycopodium alkaloid, sauroine (7,8-dihydroxylycopodine, 1) was isolated from the aerial parts of the medicinal species Huperzia saururus. The structure and relative stereochemistry of 1 were elucidated on the basis of its spectral data.     

High-resolution laser spectroscopy of the AΠu-XΠg system of Br2

The laser excitation spectrum of the Br₂⁺ molecular ion was observed at rotational resolution for the first time, with the ions being generated by Penning ionization. In contrast to Cl₂⁺ and F₂⁺ but in agreement with recent theoretical work, no vibrational or rotational perturbations are observed. The data from a number of vibrational bands are fitted simultaneously to give reliable estimates of the Dunham rotational and vibrational constants. This fit indicates that the vibrational numbering used in previous studies should be increased by 1 in the upper state.     

(Mn1−xPbx)Pb10+ySb12−yS26−yCl4+yO, a new oxy-chloro-sulfide with ∼2 nm-spaced (Mn,Pb)Cl4 single chains within a waffle-type crystal structure

The new oxy-chloro-sulfide (Mn_1−xPb_x)Pb_10+ySb_12−yS_26−yCl_4+yO (x ∈ [0.2-0.3]; y ∈ [0.3-1.6]) was synthesized by dry way at 500-600 °C. A single crystal ∼Mn_0.7Pb_11.0Sb_11.3S_25.3Cl_4.7O indicates a monoclinic symmetry, space group C2/m, with a = 37.480(8), b = 4.1178(8), c = 18.167(4) Å, β = 106.37(3)°, V = 2690.2(9) Å³, Z = 2. Its crystal structure was determined by X-ray single crystal diffraction, with a final R = 5.11%. Modular analysis of the crystal structure reveals a “waffle” architecture, where complex rods with lozenge section delimitate an internal channel filled by a single chain of (Mn_0.7Pb_0.3)Cl₆ octahedra connected by opposite edges. Minimal inter-chain distances are close to 18 Å. The rod wall, two-atom thick, presents, in alternation with S atoms, Pb or (Pb,Sb) cations with prismatic coordination in the internal atom layer, while the external atom layer is constituted exclusively by Sb cations with dissymmetric square pyramidal coordination. A (Pb,Sb)₂S₂ fragment connects two successive rods along (2 0 1) to form a waffle-type palissadic layer. The unique O position, half filled, presents the same environment than the isolated O positions in the oxy-sulfide Pb₁₄Sb₃₀S₅₄O₅, or oxy-chloro-sulfides Pb₁₈Sb₂₀S₄₆Cl₂O and (Cu,Ag)₂Pb₂₁Sb₂₃S₅₅ClO. This compound belongs to a pseudo-homologous series of chalcogenides with waffle structure, ordered according to the size of their lozenge shape channel. Such a complex senary compound of the oxy-chloro-sulfide type illustrates the structural competition between three cations, on one hand, and, on the other hand, three anions. This compound is of special interest regarding the 1D distribution of magnetic Mn²⁺ atoms at the ∼2 nm scale.     

Slow magnetic relaxation in a novel carboxylate/oxalate/hydroxyl bridged dysprosium layer

A new 2D dysprosium layer compound has been successfully synthesized from reaction with 2-(3-pyridyl) pyrimidine-4-carboxylic acid (H3-py-4-pmc), in which the Dy³⁺ ions reside in square antiprismatic coordination environments and are connected by carboxylate/oxalate/hydroxyl bridges. Magnetic studies reveal ferromagnetic interactions between Dy³⁺ ions, slow magnetic relaxation with an effective energy barrier U _eff of 186 K under zero dc field and pronounced hysteresis loops at low temperatures. Further dilution magnetic study suggests that the slow magnetic relaxation originates from the single-ion magnetic behavior of Dy³⁺ ion and that magnetic coupling suppresses the quantum tunneling of magnetization at low temperature. In addition, theoretical calculation indicates strong Ising anisotropy of the Dy³⁺ ion that is due to the strong interaction between Dy³⁺ ions and hydroxyl groups.     

Synthesis of a Doubly Boron‐Doped Perylene through NHC‐Borenium Hydroboration/C−H Borylation/Dehydrogenation

Reaction of an N‐heterocyclic carbene (NHC)–borenium ion with 9,10‐distyrylanthracene forms four B−C bonds through two selective, tandem hydroboration–electrophilic C−H borylations to yield an isolable, crystallographically characterizable polycyclic diborenium ion as its [NTf₂]⁻ salt ( 1 ). Dehydrogenation of 1 with TEMPO radical followed by acidic workup yields a 3,9‐diboraperylene as its corresponding borinic acid ( 2 ). This sequence can be performed in one pot to allow the facile, metal‐free conversion of an alkene into a small molecule containing a boron‐doped graphene substructure. Doubly boron‐doped perylene 2 exhibits visible range absorbance and fluorescence in chloroform solution (Φ =0.63) and undergoes two reversible one‐electron reductions at moderate potentials of −1.30 and −1.64 eV vs. ferrocenium/ferrocene in DMSO. Despite sterically accessible boron centers and facile electrochemical reductions, compound 2 is air‐, moisture‐, and silica gel‐stable.     

Ethylene/ethane separation by CuCl/AC adsorbent prepared using CuCl<Subscript>2</Subscript> as a precursor

Activated carbon (AC) supported CuCl (CuCl/AC) for ethylene/ethane separation has been prepared with CuCl₂ as precursor by a solid-state dispersion method. The samples are characterized by inductively coupled plasma optical emission spectrometry, X-ray diffraction, N₂ adsorption/desorption and X-ray photoelectron spectroscopy, and investigated for ethylene (C₂H₄) and ethane (C₂H₆) adsorptions. The characterization results reveal that CuCl₂ supported on AC can be highly dispersed on the surfaces of AC support and completely converted to CuCl after activation at 543 K in N₂. The resultant adsorbent displays high ethylene adsorption capacity, high C₂H₄/C₂H₆ adsorption selectivity and excellent reversibility. The adsorption isotherms of ethylene and ethane on CuCl/AC at temperatures up to 333 K can be well fitted by the Sips models, and the corresponding isosteric heats of adsorption are calculated from the Clausius–Clapeyron equation. The value of isosteric heat of adsorption suggests that the interaction of ethylene with CuCl/AC is between physisorption and chemisorption.     

Über geordnete Perowskite mit Kationenfehlstellen. VIII. Strukturuntersuchungen an Ba2Ba7/8□1/8UO57/8□1/8

On ordered perovskites with cationic vacancies. VIII. Structure investigations on Ba₂Ba_7/8□_1/8UO_57/8□_1/8 The reddish brown Ba₂Ba_7/8□_1/8UO_57/8□_1/8 belongs to the group of oxygen perovskites with an ordered distribution of cationic vacancies. It crystallized tetragonally (a = 12.62₄ Å; c = 17.53₄ Å) with 16 formula units in the unit cell: Ba₃₂Ba₁₄□₂U₁₆O₉₄□₂. For the space group I4/mmm intensity calculations on powder data gave a refined, intensity related R′ value of 13.4%. The octahedrally coordinated barium an uranium atoms are 1:1 ordered; both cationic vacancies are located in the barium sublattice and form a body centered arrangement. For the 94 oxygen atoms and the two oxygen vacancies a statistical distribution was chosen. In the lattice all cations neighbouring the cationic vacancies are dislocated: The corresponding barium atoms in the close packed sheets move by ～0.55 Å in direction of the holes, on the contary the uranium atoms concerned are shifted away by ～0.17 Å and ～0.26 Å respectively.     

Darstellung,Eigenschaften und Kristallstruktur von RuSn6[(Al1/3–xSi3x/4)O4]2 (0 ≤ x ≤ 1/3) – einem Oxid mit isolierten RuSn6‐Oktaedern

Preparation, Properties, and Crystal Structure of RuSn₆[(Al_1/3–xSi_3x/4)O₄]₂ (0 ≤ x ≤ 1/3) – an Oxide with isolated RuSn₆ Octahedra RuSn₆[(Al_1/3–xSi_3x/4)O₄]₂ is obtained by the solid state reaction of RuO₂, SnO₂, Sn, and Si in an Al₂O₃‐crucible at 1273 to 1373 K. The compound is cubic with the space group Fm 3 m (a = 9.941(1) Å, Z = 4, R₁ = 0.0277, wR₂ = 0.0619), a semiconductor and stable in air. Results of Mößbauer measurements as well as bond length‐bond strength calculations justify the ionic formulation Ru²⁺Sn₆²⁺[(Al_1/3–x³⁺Si_3x/4⁴⁺)O₄^2–]₂. The central motif of the crystal structure are separated RuSn₆‐octahedrea. These are interconnected by oxygen atoms, arranged tetrahedrely above the surfaces of the RuSn₆‐octahedrea and partialy filled with Al and Si, respectively. Because of these features the compound can be considered as a variant of the crystal structure type of pentlandite.     

Diffraction and DAFS Studies of a Ba4(BaxPt1−x)Pt2O9Twinned Crystal, a Member of the Bap(BaxPt1−x)Ptp−2O3p−3Series

Crystallographic studies of the Ba–Pt–O system have been undertaken using X-ray and electron diffraction techniques. The system is described by means of a Ba_p(Ba_xPt²⁺_1−x)Pt⁴⁺_p−2O_3p−3formula which corresponds to a BaO₃hexagonal based framework with Pt chains, whereprepresents the oxygen deficiency and the presence of both Pt⁴⁺and Pt²⁺cations in the compounds, andxa possible substitution of Pt²⁺by Ba²⁺in trigonal prismatic sites. The structure of a Ba₄(Ba_0.04Pt²⁺_0.96)Pt⁴⁺₂O₉crystal has been solved by using 5548 X-ray difraction reflections collected on a twinned crystal. Refinements were performed with two distinct models: an “average”P321 space group and an “orthorhombic”C2 space group with cell parametersa=17.460(4) Å,b=10.085(2) Å,c=8.614(3) Å. In this structure, two Pt⁴⁺and one Pt²⁺cations are distributed over four Ba planes and form chains along thecaxis, consisting of two face-sharing Pt⁴⁺O₆octahedra connected with one Pt²⁺O₆trigonal prism. A lattice misfit occurs between the rigid barium lattice and the PtO₃chains, giving rise to a composite structure. Twinning and domain configurations are described and taken into account in the refinement. This twinning is related to the presence of Pt²⁺cations, whose positions break the threefold axis symmetry. A diffraction anomalous fine structure (DAFS) study was also performed on this twinned single crystal. Anomalous scattering factorsf′ andf″ for platinum in this crystal were refined near the L_IIIPt absorption edge. They confirm the weak barium occupancy of the trigonal prismataic site and the Pt⁴⁺valence of the octahedral sites. Reflection overlaps, due to twinning, flatten the DAFS sensitivity to Pt atoms in the prismatic sites and did not allow their clear valence determination, but Pt–O bond lengths agree with the presence of Pt²⁺cations at the center of prismatic faces. Electron diffraction patterns of powders having slightly different composition show a continuous evolution of incommensurate Bragg peaks and a weak correlation between the PtO₃chains. They also confirm the composite nature and the one-dimensionality of the Ba_p(Ba_xPt²⁺_1−x)Pt⁴⁺_p−2O_3p−3series, which can produce highly anisotropic physical properties.     

N-Dansyl-carbazoloquinone; a chemical and electrochemical fluorescent switch

A new ‘push-pull’ molecule having an efficient fluorophore (dansyl) in electronic communication with an active redox quencher (phenyl-carbazoloquinone) through an NH-bridge was designed and synthesized. This all-organic molecule is suggested as a highly reversible ‘on/off’ molecular switching system. Chemical and electrochemical inter-conversion between the quinone acceptor and the dansyl donor were demonstrated via UV-vis, cyclic voltammetry and fluorescence measurements.     

Self‐assembly in a polystyrene/montmorillonite nanocomposite

A self‐assembly phenomenon in an extruded polystyrene/clay nanocomposite sample is observed during a temperature increase process. Wide‐angle X‐ray diffraction (WAXD), transmission electron microscopy (TEM), and infrared dichroism techniques have been employed to investigate the self‐assembly phenomenon. The results show that in the self‐assembly structure the montmorillonite primary particles orient parallel, and the phenyl rings of the polystyrene align perpendicular to the primary particles, whereas no obvious orientation of the aliphatic chain was observed.     

Oxygen permeation through a Ce0.8Sm0.2O2−δ–La0.8Sr0.2CrO3−δ dual-phase composite membrane

A composite of oxygen ion conducting oxide Ce_0.8Sm_0.2O_2−δ (60 vol.%) and electron conducting oxide La_0.8Sr_0.2CrO_3−δ was prepared by sintering a powder compact at a temperature of 1550 °C. No significant reaction between the two constituent oxides was observed under preparation and oxygen permeation conditions. Appreciable oxygen permeation fluxes through the composite membrane were measured at elevated temperatures with one side of it exposed to the ambient air and the other side to a flowing helium gas stream. The oxygen flux initially increased with time, and took a long time to reach a steady value. A steady oxygen permeation flux as high as 1.4 × 10⁻⁷ mol cm⁻² s⁻¹ was obtained with a 0.3 mm thick membrane at 950 °C under a relatively small oxygen partial pressure difference of 0.21 bar/0.0092 bar. It was revealed that the overall oxygen permeation process was mainly limited by the transport in the bulk of the membrane in the range of the membrane thickness greater than 1.0 mm, and the limitation by the surface oxygen exchange came into play at reduced thickness of 0.6 mm.     

Synthesis of a soluble vinyl‐type polynorbornene with a half‐titanocene/methylaluminoxane catalyst

Norbornene polymerization was performed with monocyclopentadienyltitanium tribenzyloxide activated with methylaluminoxane (MAO). The catalyst afforded a pure vinyl‐type polymer at temperatures below 80 °C and at appropriate MAO concentrations. However, at higher temperatures or high MAO concentrations, a portion of the titanium species was pyrolyzed to form an alkylidene compound that catalyzed the ring‐opening metathesis polymerization of norbornene. As a result, both vinyl‐type and ring‐opening polymers were produced under the reaction conditions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1421–1425, 2002     

Reduced Graphene Oxide/Pt Nanoparticles/Zn‐MOF‐74 Nanomaterial for a Glucose Biosensor Construction

In this study, a new glucose biosensor was fabricated by immobilizing glucose oxidase (GOx) on platinum nanoparticles (Pt NPs) decorated reduced graphene oxide (rGO)/Zn‐MOF‐74 hybrid nanomaterial. Herein, the biosensor fused the advantages of rGO with those of porous Zn‐MOF and conductive Pt NPs. This has not only enlarged the surface area and porosity for the efficient GOx immobilization and faster mass transport, but also provided favorable electrochemical features such as high current density, remarkable electron mobility through metal nanoparticles, and improved electron transfer between the components. The GOx‐rGO/Pt NPs@Zn‐MOF‐74 coated electrode displayed a linear measurement range for glucose from 0.006 to 6 mM, with a detection limit of 1.8 μM (S/N: 3) and sensitivity of 64.51 μA mM^?1 cm^?2. The amperometric response of the enzyme biosensor demonstrated the typical behavior of Michaelis‐Menten kinetics. The obtained satisfying sensitivity and measurement range enabled fast and accurate glucose measurement in cherry juice using the fabricated biosensor. The water‐stable Zn‐MOF‐74 demonstrated higher enzyme loading capacity and can be potent supporting material for biosensor construction.