Systemic analysis of structures and contents of nitrogen-containing compounds and other non-hydrocarbons in crude oils in conjunction with chemometric resolution technique.

A method is described for the systemic identification and quantitative analysis of nitrogen-containing compounds and other non-hydrocarbons in crude oils. The pre-fractionation of a crude oil sample into 7 fractions was performed by di-adsorption column chromatography using neutral aluminum oxide and silica gel. A subsequent high-resolution separation of individual components was achieved by using capillary column gas chromatography, and compound types were detected by a mass spectrometer. In conjunction with a chemometric method, the compounds in the fractions were further resolved or separated, which made it possible to identify some nitrogen-containing compounds and other non-hydrocarbons in crude oils. To a certain extent, this method could relieve the difficulty of classical analysis in identifying those species with very low contents or incompletely separation, particularly in the cases where authentic standards were not available for addition into the unknown samples in order to reveal what indeed existed in them. The structures and contents of 168 nitrogen-containing compounds in one crude sample and 60 non-nitrogen-containing compounds in one of non-hydrocarbon fractions of this oil sample were determined, and the addition-recovery examination of some standard compounds showed that the analytical veracity was satisfactory.     

Evaluation of gas chromatography-mass spectrometry in conjunction with chemometric resolution for identification of nitrogen compounds in crude oil

A chemometric resolution method is described for the identification of nitrogen compounds in crude oil. Prefractionation of crude oil into discrete chemical classes was performed by adsorption column chromatography using small quantities of neutral aluminum oxide and silicic acid. Subsequent high-resolution separation of individual components was achieved by using capillary column gas chromatography, and compound types were detected by mass spectrometer. In conjunction with a combined chemometric method, each principal chemical class was further resolved and separated, which made it possible to identify some nitrogen compounds in the investigated oils. To a certain extent, this method could relieve classical analysis of difficulty in identifying those species with poorly low contents or partially chromatographic overlaps, particularly in the cases where authentic standards were not available for addition into the unknown analytical systems to reveal what indeed existed in them.     

Identification of some polycyclic nitrogen-containing compounds in coal-derived oil

A systematic method for the identification of aza-arenes in coal-derived oil was developed. The basic nitrogen-containing substances were extracted with 6 M hydrochloric acid and fractionated sequentially by using gel chromatography and thin-layer chromatography (TLC) on an alumina plate. The aza-arenes in these fractions were separated by using glass capillary gas chromatography. Individual compounds in the column effluent were trapped in a system consisting of a valve for flow switching and a trapping tube made from a glass capillary. The fluorescence spectra of nanogram to subnanogram amounts of trapped compounds were measured. Some attempts were made to identify components based on their TLC RF values and their fluorescence spectra, in addition to their mass spectra.     

Analysis of the essential oils of Coriandrum sativum Using GC-MS coupled with chemometric resolution methods

The essential oils extracted from Coriandrum sativum L. were analyzed by GC-MS coupled with chemometric resolution methods. Through the chemometric resolution methods, peak clusters were uniquely resolved into the pure chromatographic profiles and mass spectra of each component. Qualitative analysis was performed by comparing the pure mass spectra with those in the NIST 05 mass spectral library. Quantitative analysis was performed using the total volume integration method. A total of 118 constituents were detected, of which 104 were identified, accounting for 97.27% of the total content. The results indicate that GC-MS combined with chemometric resolution methods can greatly enhance the capability of separation and the reliability of qualitative and quantitative results. The combined method is an economical and accurate approach for the rapid analysis of the complex essential oil samples in Coriandrum sativum L.     

Reaction of N-tritylamines with nitrogen-containing heterocyclic compounds

Transtritylation occurs during the reaction of N-trityl-N-(β-cyanothethyl)amines with indole, morpholine, and 2- and 4-aminopyridines. The detritylation and transtritylation of the synthesized compounds were studied.     

多环芳烃指纹用于渤海采油平台原油的鉴别

采用气相色谱/质谱方法,对渤海海上4个不同区块、5个平台的6口油井原油进行了烷基化多环芳烃系列化合物和美国环保署（EPA）优先控制多环芳烃系列化合物的准确定性定量分析。通过多环芳烃原始指纹谱图、多环芳烃组分分布模式和特征比值的比较对上述原油进行鉴别。结果证明不同区块的原油中多环芳烃指纹信息不尽相同,即使在同一平台不同油井中所产的原油其指纹也存在一定差异。为确保原油鉴别的准确性,分析过程中必须在仪器的稳定性和样品前处理方面实施严格的质量控制措施。     

Analysis of sulfur-containing compounds in crude oils by comprehensive two-dimensional gas chromatography with sulfur chemiluminescence detection

This paper reports an analytical method for separating, identifying, and quantifying sulfur-containing compounds in crude oil fraction (IBP-360 degrees C) samples based on comprehensive two-dimensional gas chromatography coupled with a sulfur chemiluminescence detector. Various sulfur-containing compounds and their groups were analyzed with one direct injection. 3620 peaks were detected including 1722 thiols/thioethers/ disulfides/1-ring thiophenes, 953 benzothiophenes, 704 dibenzothiophenes, and 241 benzonaphthothiophenes. The target sulfur compounds and their groups were identified based on the group separation feature and structured retention of comprehensive two-dimensional gas chromatography as well as standard substances. The quantitative analysis of major sulfur-containing compounds and total sulfur was based on the linear response of the sulfur chemiluminescence detector using the internal standard method. The sulfur contents of target sulfur compounds and their groups in 4 crude oil fractions were also determined. The recoveries for standard sulfur-containing compounds were in the range of 90-102%. The quantitative result of total sulfur in the Oman crude oil fraction sample was compared with those from ASTM D 4294 standard method (total S by X-ray fluorescence spectrometry), the relative deviation (RD%) was 4.2% and the precision of the method satisfactory.     

Supramolecular compounds of indium sulfates with nitrogen-containing cations

Compounds with a general formula [Cat][In(H₂O) _n (SO₄)₂] _x · mH₂O (where Cat = C(NH₂)₃, H(2,2′-Bipy), H₂(4,4′-Bipy), H₂[Py(CH₂)₃Py], and H₃N(CH₂)₆NH₃) were synthesized and identified from the elemental analysis, IR, and thermogravimetric analysis data. X-ray diffraction analysis of crystalline [C(NH₂)₃][In(H₂O)₂(SO₄)₂] complex showed that the polymer chains of In aquasulfate form ensembles with guanidinium ions. The structure of [H₂(4,4′-Bipy)][In₂(H₂O)₆(SO₄)₄] · 2H₂O consists of the dimeric anions of indium sulfate. The coordination sphere of In includes three O atoms of three SO₄ groups and three O atoms of water molecules. The dimers are united into framework by diprotonated Bipy cations.     

Modification of polychloroprene-based adhesive compositions with nitrogen-containing compounds

The possibility of improving the adhesive characteristics of polychloroprene-based adhesive compositions by modifying them with nitrogen-containing adhesion promoters was studied. It was shown that the modification of polychloroprene with microquantities of nitrogen-containing compounds results in an increase in the durability of the glue fastening of rubbers based on different caoutchoucs by an average of 0.5–3.5 times.     

Thermo-oxidative reactions of crude oils

In this research, thermo-oxidative reactions of crude oils of different origin are determined in limestone matrix using simultaneous thermogravimetry and differential thermal analysis (TG–DTA) systems. Two different reaction regions were identified known as low temperature (LTO) and high temperature oxidation (HTO). Kinetic parameters of the samples were determined by four different methods and the results are discussed.     

Reactivity of digallane toward nitrogen-containing compounds

The reactions of [LGa–GaL] (L = dpp-bian = 1,2-bis[(2,6-di-isopropylphenyl)imino]acenaphthene) with ammonia and pyrrolidine in toluene lead to the formation of adducts [L(NH₃)Ga–Ga(NH₃)L], [L(HNC₄H₈)Ga–GaL] and [L(HNC₄H₈)Ga–Ga(HNC₄H₈)L], respectively. In contrast, the reaction between crystalline digallane and an excess of pyrrolidine leads to the formation of compound [LGa(NC₄H₈)(HNC₄H₈)]. The complex [LGa(C₅H₅N)(μ-O)Ga(C₅H₅N)L] was obtain from reaction of digallane with N₂O in the presence of pyridine.     

Identification of sterene compounds produced during the processing of edible oils

Samples of maize, rapeseed, soyabean, sunflower, and palm oils, collected at different stages in their respective refining processes, have been analyzed for the presence of dehydrated sterols (sterenes). A total of fifteen compounds were detected. Four have been characterized using model systems designed to investigate their formation. Their elemental composition, and that of the other eleven sterenes, was determined by high resolution mass spectrometry and structures assigned to a further six compounds. These included the -3,5-, -2,5-, -4,6-,-3,5,22-, and -4,6,22- sterenes. Sterenes were not present in crude or alkali neutralized oils. Bleaching introduced a maximum concentration of 5 μg g^?1 of total sterenes into the edible oils. Deodorization is the dominant stage in sterene production resulting in a maximum total concentration of 163 μg g^?1. This increased concentration arises due to dehydration of the sterols and considerable isomerism of the sterenes.     

Thermal characteristics of crude oils treated with rheology modifiers

Thermal characteristics of eight crude oils and their treatment with additives were studied by differential scanning calorimetry (DSC), thermomicroscopy, viscometer and pour point tester. Different additives were found as more effective for different type of crude oils depending on the wax content. Crude oils showed a reduced pour point after treatment with additives. Effects of different additives were also discussed by analysing the DSC curves and thermomicroscopy result.     

Identification and quantification of alkene-based drilling fluids in crude oils by comprehensive two-dimensional gas chromatography with flame ionization detection

Comprehensive two-dimensional gas chromatography with flame ionization detection (GC x GC-FID) was used to measure alkene-based drilling fluids in crude oils. Compared to one-dimensional gas chromatography, GC x GC-FID is more robust for detecting alkenes due to the increased resolution afforded by second dimension separations. Using GC x GC-FID to analyze four oil samples from one reservoir contaminated with the same drilling fluid, C(15), C(16), C(17), C(18) and C(20) alkenes were identified. The drilling fluid that contaminated these samples also differed from another commercially obtained fluid, which only contained C(16) and C(18) alkenes. These results should motivate the petroleum industry to consider GC x GC-FID for measuring drilling fluids.     

气流吹扫-注射器微萃取-全二维气相色谱法用于原油组分的表征

建立了气流吹扫-注射器微萃取（GP-MSE）与全二维气相色谱/飞行时间质谱（GC×GC/TOFMS）联用分析原油成分的方法。为了找到适用于原油样品分析的GP-MSE条件,用饱和烃混合标准溶液和15种芳烃的混合标准溶液进行了条件优化,得到的最佳条件如下:取样量5 mg、萃取溶剂正己烷20 μ L、载气流速2 mL/min、加热时间3 min、加热温度300 ℃、冷凝温度-2 ℃。处理后的样品在全二维色谱/飞行时间质谱上进样分析,得到了满意结果。方法的检出限为34~93 μg/L,线性相关系数（R²）>0.99,对50种烃类化合物的回收率在82.0%~107.3%之间,相对标准偏差<10%（n=5）。结果表明GP-MSE-GC×GC/TOFMS法是一种新型绿色、高效、灵敏的分析方法,非常适合原油中挥发性与半挥发性组分的分析。