Electrochemical deposition and characterization of mixed-valent rhenium oxide films prepared from a perrhenate solution

Cathodic electrodeposition of mixed-valent rhenium oxides at indium tin oxide, gold, rhenium, and glassy carbon electrodes from acidic perrhenate solutions (pH = 1.5 +/- 0.1) prepared from hydrogen peroxide and zerovalent rhenium metal is described. Cyclic voltammetry, variable angle spectroscopic ellipsometry (VASE), X-ray photoelectron spectroscopy (XPS), UV-vis spectroelectrochemistry, and electrochemical quartz crystal microbalance (EQCM) data indicate that the chemical nature of the electrodeposited rhenium species depends mainly upon the potential and supporting electrolyte. The presence of SO4(2-) as a supporting electrolyte inhibits the adsorption of perrhenate, ReO4-, at non-hydrogen adsorbing electrode materials. However, in acidic perrhenate solutions containing only protons and ReO4- anions, strong adsorption of ReO4- at potentials preceding hydrogen evolution occurs. This leads to the formation of an unstable ReIII2O3 intermediate which catalytically disproportionates to form mixed-valent rhenium films consisting of 72% ReIVO2 and 28% Re0. During the hydrogen evolution reaction (HER), hydrogen polarization causes the principle deposit to be more reduced, consisting of roughly 64% ReIVO2 and 36% Re0. Conclusively, metallic rhenium can be deposited at potentials preceding the HER at non-hydrogen adsorbing electrode materials, especially in the absence of SO4(2-) anions.     

Heterogenization of an organorhenium(VII) oxide on a modified mesoporous molecular sieve

A novel route to heterogenize an organorhenium(VII) oxide, derived from the well examined methyltrioxorhenium(VII) (MTO), on the surface of an iodosilane-modified MCM-41 is applied. The successful grafting of the -CH(2)-ReO3 moiety on the surface was evidenced by 1H CP MAS NMR, IR spectroscopy, TG-MS, and elemental analysis. XRD and TEM analyses confirm the retaining of long-range ordering throughout the grafting process. The rhenium loading of the mesoporous material after heterogenization of MTO is found to be 1.25 wt%. Despite containing formally a derivative of the very sensitive benzyltrioxorhenium(VII) the material is stable at room temperature and applicable as a heterogeneous catalyst for aldehyde olefination reactions.     

Electrochemical impedance spectroscopy as a probe for wet chemical silicon oxide characterization

The kinetics of the chemical growth of silicon oxide in H₂O₂-containing ammonia solutions and its break-up by dilute ammonia solutions was investigated using electrochemical techniques and more specifically electrochemical impedance spectroscopy. The recording of the open circuit potential (OCP), complemented by successive impedance diagrams, demonstrates clearly the build-up of a silicon oxide passivating layer when hydrophobic Si surfaces are immersed in NH₃+H₂O₂ solutions. The thickening of the chemical oxide coating mainly results in the decrease of the capacitance value together with the enhancement of the ohmic surface resistance. On the other hand, pure ammonia dilute solutions lead to the progressive destruction of this hydrophilic passivating surface oxide, which is revealed by the simultaneous decay of the real component of the impedance. Finally, we observed the break-up of the passive layer, characterized by a sudden drop of the OCP to a value quite identical to that obtained with a bare Si surface. This process resulted in a dramatic corrosion of the substrate surface. Electronic Publication     

Electrochemical determination of nitric oxide and of its derivatives

Nitric oxide (NO) is one of the simplest odd electron species. Furthermore, it is relatively hydrophobic, which is consistent with its role as a diffusible intracellular messenger or as an immune effector. NO is generated in biological systems and plays important roles as a regulatory molecule. The main problem in NO analysis is its extreme reactivity; in aerated water solution it is transformed into nitrite and nitrate, inactive biological forms. Moreover, it may lose an electron forming the NO⁺ ion, involved in the synthesis of nitrosothiols (RSNOs). The main problems encountered in the analytical determination of free NO and of RSNOs in biological systems are the low stability and the very low concentration of these compounds. The determination of nitrates and nitrites may also be difficult when their concentration is in the nmolar range. We describe an electrochemical assay for the determination in the same sample of free NO and of its derivatives in nmolar range. Owing to its high sensitivity, the procedure could also be applied to environmental analyses     

非化学计量的混合价态氧化钼(VI,V)修饰微电极的电化学制备

在新鲜配制的Na2MoO4的弱酸性水溶液中, 通过循环电位扫描在碳纤维微电极表面可沉积一层均匀的蓝色氧化钼(VI, V)薄膜, 膜的厚度通过电量进行控制。在电沉积之前, 电极的阳极化处理不仅可以加快氧化钼的电沉积, 而且可以改善膜的伏安行为。溶液的pH值对膜的电沉积和伏安行为有极大的影响。膜的阴极过程被认为是产生青钼铜: HxMoO3 (0相似文献   

Electrochemical reduction of graphene oxide and its electrochemical capacitive performance

A convenient method for the production of graphene is developed using the electrochemical reduction of graphite oxide (GO) in solution without assembling it onto the electrode. The samples were examined by X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and Raman spectroscopy. The results show that the number of oxygen functional groups can be significantly decreased. The electrochemical capacitance of the prepared graphene after 8 h of reduction is 158.5 F g^?1 at 0.5 A g^?1, much higher than that of GO and carbon nanotubes. The mechanism for this reaction is also proposed in this paper.     

Electrochemical sensing chemical oxygen demand based on the catalytic activity of cobalt oxide film

Cobalt oxide sensing film was in situ prepared on glassy carbon electrode surface via constant potential oxidation. Controlling at 0.8 V in NaOH solution, the high-valence cobalt catalytically oxidized the reduced compounds, decreasing its surface amount and current signal. The current decline was used as the response signal of chemical oxygen demand (COD) because COD represents the summation of reduced compounds in water. The surface morphology and electrocatalytic activity of cobalt oxide were readily tuned by variation of deposition potential, time, medium and Co²⁺ concentration. As confirmed from the atomic force microscopy measurements, the cobalt oxide film, that prepared at 1.3 V for 40 s in pH 4.6 acetate buffer containing 10 mM Co(NO₃)₂, possesses large surface roughness and numerous three-dimensional structures. Electrochemical tests indicated that the prepared cobalt oxide exhibited high electrocatalytic activity to the reduced compounds, accompanied with strong COD signal enhancement. As a result, a novel electrochemical sensor with high sensitivity, rapid response and operational simplicity was developed for COD. The detection limit was as low as 1.1 mg L⁻¹. The analytical application was studied using a large number of lake water samples, and the accuracy was tested by standard method.     

Electrochemical hydride generation of thallium

An electrochemical hydride generation (ECHG) technique was developed to improve the determination of thallium by atomic spectrometry. The technique is based on the catholyte variation system for production of thallium hydride. Using Pb-Sn alloy as cathode, a transient peak shaped signal was achieved and its height, the maximum absorbance value, was taken as an analytical parameter. Parameters that might affect the hydride generation efficiency were investigated and the analytical performance of the method under the optimized experimental conditions was assessed. The linear range was 1-250 ng mL⁻¹ for thallium and the relative standard deviation of the method was 4.2% (RSD, n = 7). The LOD for thallium was found to be 0.8 ng mL⁻¹, showing a significant improvement relative to conventional chemical hydride generation techniques. The proposed method was applied to the determination of thallium in unalloyed zinc standard reference material. This method offers high sensitivity, simplicity, rapidness, freeness from reagent and low acid consumption.     

Electrochemical generation of metastable rhenocene

Conclusions (⁵-C₅H₅)(³-C₅H₅)Re^– anions are formed in THF as a result of the irreversible two-electron electrochemical reduction of (Cp₂Re)₂ accompanied by cleavage of the Re-Re bond. The oxidation of these anions leads to the generation of monomeric rhenocene with E⁰=–1.06 V for the Cp₂Re^0/+ redox transition.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 2, pp. 483–485, February, 1987.     

Electrocatalysis and determination of hydrazine compounds in liquid chromatography at a mixed-valent cobalt oxide/cyanocobaltate film electrode

A glassy carbon electrode coated with an electrodeposited film of mixed-valent cobalt oxide/cyanocobaltate (CoO/CNCo) enabled hydrazine compounds to be catalytically oxidized at the greatly reduced overpotential and in a wide operational pH range (pH 2.0-7.0). Electrocatalytic activity at the CoO/CNCo modified electrode was evaluated with respect to solution pH, film thickness, supporting electrolyte ions, potential scan rate, operating potential, concentration dependence and other variables. The CoO/CNCo film electrode was completely compatible with a conventional reversed-phase liquid chromatographic (RP-LC) system. Practical RP-LC amperometric detection (RP-LCEC) of hydrazines was performed. A dynamic linear response range over three orders of magnitude and a detection limit at the pmol level were readily obtained. The CoO/CNCO film electrode exhibited excellent electrocatalytic stability in the flowing streams.     

Electrochemical and chemical polymerization of acrylamide

The electrochemical and chemical polymerization of acrylamide (AA) has been studied. The electrolysis of the monomer in N,N-dimethylformamide (DMF) containing (C₄H₉)₄NClO₄ as the supporting electrolyte leads to polymer formation in both anode and cathode compartments. The cathodic polymer dissolves in the reaction mixture and the anodic polymer precipitates during the course of polymerization. A plausible mechanism for the anodic and cathodic initiation reaction has been given. The chemical polymerization of acrylamide that has been initiated by HClO₄ is analogous to its anodic polymerization. The polymer yield increases with an increase in concentration of the monomer and HClO₄. Raising the reaction temperature also enhances the polymerization rate. The overall apparent activation energy of the polymerization was determined to be ca. 19 kcal/mole. The copolymerization of acrylamide was carried out with methyl methacrylate (MMA) in a solution of HClO₄ in DMF. The reactivity ratios are r₁ (AA) = 0.25 and r₂ = 2.50. The polymerization with HClO₄ appears to be by a free radical mechanism. When the polymerization of acrylamide is carried out with HClO₄ in H₂O, a crosslinked water-insoluble gel formation takes place.     

Electrochemical generation of glycosyl triflate pools

Glycosyl triflates, which serve as important intermediates in glycosylation reactions, were generated and accumulated by the low-temperature electrochemical oxidation of thioglycosides such as thioglucosides, thiogalactosides, and thiomannosides in the presence of tetrabutylammonium triflate (Bu(4)NOTf) as a supporting electrolyte. Thus-obtained solutions of glycosyl triflates (glycosyl triflate pools) were characterized by low-temperature NMR measurements. The thermal stability of glycosyl triflates and their reactions with glycosyl acceptors were also examined.     

Electrochemical generation of mercury cold vapor and its in-situ trapping in gold-covered graphite tube atomizers

The combination of more efficient flow-through electrochemical mercury cold vapor generation with its in-situ trapping in a graphite tube atomizer is described. This coupled technique has been optimized to attain the maximum sensitivity for Hg determination and to minimize the limits of detection and determination. A laboratory constructed thin-layer flow-through cell with a platinum cathode served as the cold vapor generator. Various cathode arrangements with different active surface areas were tested. Automated sampling equipment for the graphite atomizer with an untreated fused silica capillary was used for the introduction of the mercury vapor. The inner surface of the graphite tube was covered with a gold foil placed against the sampling hole.     

纳米氧化亚铜固载亚甲兰复合膜修饰玻碳电极的电化学性质及其对多巴胺的电催化

用十六烷基三甲基溴化铵为软模板制备了纳米氧化亚铜晶须,利用XRD和TEM进行表征。研究了纳米Cu2O-Nafion膜修饰玻碳电极的电化学性质,结果表明,纳米氧化亚铜在电极上表现出一对较为可逆的氧化还原峰,对应于Cu(Ⅱ)/Cu(Ⅰ)的氧化还原,峰电流与扫速成正比,表明纳米氧化亚铜在电极表面的电化学受表面控制。研究发现在亚甲基兰为媒介的情况下电极对多巴胺的催化能力进一步提高。在此电极上多巴胺呈现一对响应良好的准可逆氧化还原峰,峰电位差106 mV,峰电流大大提高,氧化峰电位大大降低,表现出良好的电催化作用。该电极可以在抗坏血酸存在下测定多巴胺。     

Electrochemical and chemical reduction of pyridyl-substituted pyrrolidinofullerenes

Using cyclic voltammetry, it is shown that formal reduction potentials of pyridyl-substituted pyrrolidinofullerenes are shifted to negative values as compared with formal potentials of the corresponding redoxtransitions of C₆₀, which indicates weakening of the acceptor properties of the fullerene fragment. NIR spectrophotometric and EPR spectroscopic studies show that cis-2′,5′-di-(4-pyridinyl)pyrrolidino-[3′,4′:1,2][60]fullerene is reduced with 1,8-diazobicyclo[5.4.0]undec-7-ene and morpholine to give a radical anion.     

Electrochemical codeposition of nickel oxide and polyaniline

Nickel oxide (NiO_x) and polyaniline (PAni) were electrocodeposited from NiSO₄ and aniline through cyclic voltammetric scans to afford PAni–NiO_x composite film at controlled pH environment. The electrochemical activities of the film were investigated by cyclic voltammetry in 0.1 M NaOH and 0.1 M H₂SO₄, respectively. Typical redox couples of PAni in 0.1 M H₂SO₄ appeared at approximately 0.2 and 0.4 V vs. saturated calomel electrode (SCE); Ni(II)/Ni(III) redox couple was observed at approximately 0.4 V vs. SCE in 0.1 M NaOH. The morphologies and elemental components of the films were inspected by scanning electron microscopy and energy dispersive X-ray diffraction. The stability of nickel oxide in the films was found to be enhanced against acidic environments. Electrochemical catalytic behavior of NiO_x within the composite film was conserved and demonstrated by catalytic oxidation of methanol and ethanol.     

Electrochemical generation of ozone in a system with a solid polymer electrolyte

Mechanisms of ozone generation in an electrochemical system with a solid polymer electrolyte and the electrode and catalytic materials used in systems of this kind are considered. The influence exerted by the process parameters and by the type of electrolyte and electrocatalysts on the productivity of the system and on the current efficiency by ozone is analyzed.