Hollow porous organic polymer: High‐performance adsorption for organic dye in aqueous solution

Several hollow porous organic polymers were conveniently fabricated by poly‐condensation of tetraphenyl porphyrin (TPP), tetrabiphenyl porphyrin (TBPP), or triphenylbenzene (TPB), with nano‐sized ZnO particles as template and AlCl₃ as catalyst. The hollow polymers exhibit much enhanced adsorption capacity for organic dyes in aqueous solution relative to the pristine polymers. Particularly, the hollow polymer based on TBPP (h‐COP‐P) displays high adsorption capacity (460 mg/g within 500 min) as well as good recycling performance toward Rhodamine B. This capacity is about three times larger than that of corresponding pristine POPs (COP‐P) and is even comparable with the best performed organic polymers reports to date, which is ascribed to its unique hydrophobic hollow structure. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1329–1337     

Effect of neighboring groups on the pH responsive adsorption/desorption behaviors of carboxylate functionalized hollow polymer particles

In this article, a serial of bi‐functionalized hollow polymer particles (BF‐HPPs), containing both carboxylate and different amide/amine groups [HPP‐NH₂, HPP‐ethylenediamine (EDA), and HPP‐diethylenetriamine (DETA)], were specially designed and synthesized to investigate the effect of neighboring amino groups on their adsorption/desorption behavior. Due to the high density of carboxylate groups, these BF‐HPPs can serve as efficient adsorbents for selective removal of positively charged methylene blue (b‐MB). With increasing chain length of the neighboring amino groups, the maximum adsorption capacities (q_max) at pH 7 decrease dramatically from 606.1 mg g^?1 for HPP‐NH₂, to 404.9 mg g^?1 for HPP‐EDA, and 332.2 mg g^?1 for HPP‐DETA, due to increasing steric hindrance. Significantly, the equilibrium adsorption can be achieved within 15 min for HPP‐EDA and HPP‐DETA, while it takes more than 720 min for HPP‐NH₂. Moreover, the q_max of HPP‐DETA exhibits remarkable pH‐sensitive property, which decreases sharply to 32.7 mg g^?1 at pH 3 due to strong electrostatic repulsion between positively charged ammonium groups and b‐MB molecules. Accordingly, the desorption efficiency of HPP‐DETA reached up to 94% after one desorption step, which is much higher than that of HPP‐EDA (78%) and HPP‐NH₂ (60%). The absorbed b‐MB can be facilely desorbed and the adsorption capacity of the regenerated HPP‐DETA keeps above 95% after five consecutive adsorption–desorption cycles. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1404–1413     

Melamine driven supramolecular self‐assembly of nucleobase derivatives in water

Water‐soluble supramolecular polymers, especially made up of biomolecules, are ideally suited to build new biomaterials that can mimic or interact with dynamic, biological environments. Here, two derivatives from thymine (T), that is N‐[2‐(3,4‐Dihydro‐5‐methyl‐2,4‐dioxo‐1(2H)‐pyrimidinyl)acetyl]‐L‐phenylalanine (T‐phe) and N‐(2‐Aminoethyl)‐3,4‐dihydro‐5‐methyl‐2,4‐dioxo‐1(2H)‐pyrimidineacetamide (T‐NH₂) were synthesized. Then the optimal condition for self‐assembly of T‐phe and T‐NH₂ driven by melamine (M) was explored. It was observed that M/T kept at 1:3 with equivalent T‐phe and T‐NH₂ under neutral environment resulted in long fibers (>1 μm) with extremely high aspect ratios, which suggested that electrostatic and π‐stacking interactions could be effectively orchestrated by hydrogen bonds to direct the hierarchical assembly. Furthermore, hydrogels were spontaneously generated with a concentrated solution of T‐phe, T‐NH₂, and M due to the fibril entanglement. Given its biomimetic nature and efficient self‐assembly process, this newly developed supramolecular polymer stacked by tetrameric structures represented an innovative concept and pathway for novel bio‐inspired materials. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 789–796     

Polymer brushes grafted from graphene via bioinspired polydopamine chemistry and activators regenerated by electron transfer atom transfer radical polymerization

Polymer brushes decorated reduced GO (rGO) with advanced applications have been prepared by bioinspired polydopamine (PDA) chemistry integrated with activators regenerated by electron transfer atom transfer radical polymerization (ARGET‐ATRP) technique. First, rGO/PDA was obtained by the process for graphene oxide (GO) coated with a homogeneous bio‐adhesive PDA layer. Then the initiator 2‐bromoisobutyryl bromide (BIBB) was immobilized on the surface of PDA functionalized rGO. Finally, rGO/PDA‐Br was polymerized with N, N‐diethylaminoethyl methacrylate (DEAEMA) and glycidyl methacrylate (GMA) to obtain rGO/PDA‐g‐polymer brushes by ARGET‐ATRP process. The prepared rGO/PDA‐g‐PGMA brush would be subjected to further functionalization with ethylenediamine (EDA), which would impart the obtained products (rGO/PDA‐g‐PGMA‐NH₂) with good adsorption ability toward cationic dyes. The chemical structures and morphologies of the functionalized GO products have been characterized in detail by Fourier transform infrared spectroscopy (FTIR), X‐ray photoelectron spectroscopy (XPS), Raman spectroscopy, thermal gravimetric analysis (TGA), scanning electron microscope (SEM), transmission electron microscope(TEM), and atomic force microscopy (AFM). The distinctive pH‐responsive character of rGO/PDA‐g‐PDEAEMA and adsorption ability of rGO/PDA‐g‐PGMA‐NH₂ for cationic dyes have been explored by UV–vis spectrophotometer. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 689–698     

Synthesis and characteristics of poly(N‐isopropylacrylamide‐co‐methacrylic acid)/Fe3O4 thermosensitive magnetic composite hollow latex particles

In this study, the poly(NIPAAm–MAA)/Fe₃O₄ hollow latex particles were synthesized by three steps. The first step was to synthesize the poly(methyl methacrylate‐co‐methylacrylate acid) (poly(MMA‐MAA)) copolymer latex particles by the method of soapless emulsion polymerization. Following the first step, the second step was to polymerize N‐isopropylacrylamide (NIPAAm), MAA, and crosslinking agent (N,N'‐methylene‐bisacrylamide (MBA)) in the presence of poly(MMA‐MAA) latex particles to form the linear poly(MMA‐MAA)/crosslinking poly (NIPAAm‐MAA) core‐shell latex particles. After the previous processes, the core‐shell latex particles were heated in the presence of NH₄OH to dissolve the linear poly(MMA‐MAA) core in order to form the poly(NIPAAm‐MAA) hollow latex particles. In the third step, Fe²⁺ and Fe³⁺ ions were introduced to bond with the ? COOH groups of MAA segments in the poly(NIPAAm‐MAA) hollow polymer latex particles. Further by a reaction with NH₄OH and then Fe₃O₄ nanoparticles were generated in situ and the poly(NIPAAm‐MAA)/Fe₃O₄ magnetic composite hollow latex particles were formed. The concentrations of MAA, crosslinking agent (N,N'‐methylene bisacrylamide), and Fe₃O₄ nanoparticles were important factors to influence the morphology of hollow latex particles and lower critical solution temperature of poly(NIPAAm–MAA)/Fe₃O₄ magnetic composite hollow latex particles. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Metal Microporous Aromatic Polymers with Improved Performance for Small Gas Storage

A novel metal‐doping strategy was developed for the construction of iron‐decorated microporous aromatic polymers with high small‐gas‐uptake capacities. Cost‐effective ferrocene‐functionalized microporous aromatic polymers (FMAPs) were constructed by a one‐step Friedel–Crafts reaction of ferrocene and s‐triazine monomers. The introduction of ferrocene endows the microporous polymers with a regular and homogenous dispersion of iron, which avoids the slow reunion that is usually encountered in previously reported metal‐doping procedures, permitting a strong interaction between the porous solid and guest gases. Compared to ferrocene‐free analogues, FMAP‐1, which has a moderate BET surface area, shows good gas‐adsorption capabilities for H₂ (1.75 wt % at 77 K/1.0 bar), CH₄ (5.5 wt % at 298 K/25.0 bar), and CO₂ (16.9 wt % at 273 K/1.0 bar), as well as a remarkably high ideal adsorbed solution theory CO₂/N₂ selectivity (107 v/v at 273 K/(0–1.0) bar), and high isosteric heats of adsorption of H₂ (16.9 kJ mol^?1) and CO₂ (41.6 kJ mol^?1).     

Solvent‐Dependent Synthesis from Layer to Microporous Pillared‐Layer Framework for Selective Sorption of Gas Light Hydrocarbons

Three metal‐organic frameworks, [Zn₃(bdc)₃(DMA)₂] ( 1 ) (H₂bdc = terephthalic acid; DMA = N,N‐dimethylacetamide), [Zn₃(bdc)₃(DMA)(DMPU)] ( 2 ) (DMPU = 1,3‐dimethylpropyleneurea), and [Zn₃(bdc)₄(Hdma)₂] ( 3 ) [Hdma = protonated dimethylamine (Me₂NH₂)] were synthesized by using different solvents. The solvents determine the framework architectures range from layer to microporous pillared‐layer framework. The microporous framework has 8‐connected bcg topology and shows selective sorption ability for gas light hydrocarbons.     

Tuning the adsorption and fluorescence properties of aminal‐linked porous organic polymers through N‐heterocyclic group decoration

Aiming at tuning the adsorption and fluorescence properties of targeted porous organic polymer, four new aminal‐linked porous organic polymers (NAPOPs) were synthesized through the reaction of 1,4‐Bis(4,6‐diamino‐s‐triazin‐2‐yl) benzene (BATB) with four kinds of aldehydes substituted with different N‐heterocyclic groups. Among the polymers, NAPOP‐3 decorated with 5‐phenyl‐tetrazole group shows the largest CO₂ adsorption capacity (2.52 mmol g^?1 at 273 K and 100 kPa) because of its relative large surface area, while NAPOP‐1 decorated with piperazine groups shows relative large CO₂/N₂ adsorption selectivity (77 at 273 K and 100 kPa), attributable to its large CO₂ adsorption heats and cabined pore (<4 Å). Meanwhile, NAPOP‐1 and ?3 exhibit high adsorption rate toward iodine with a high capacity (>240 wt %). In addition, different luminescence emissions were also observed for NAPOPs, indicating different intramolecular charger transfer occurred inside polymer networks. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1724–1730     

N‐Doped Yellow TiO2 Hollow Sphere‐Mediated Visible‐Light‐Driven Efficient Esterification of Alcohol and N‐Hydroxyimides to Active Esters

Herein we report a simple synthetic protocol for N‐doped yellow TiO₂ (N‐TiO₂) hollow spheres as an efficient visible‐light‐active photocatalyst using aqueous titanium peroxocarbonate complex (TPCC) solution as precursor and NH₄OH. In the developed strategy, the ammonium ion of TPCC and NH₄OH acts as nitrogen source and structure‐directing agent. The synthesized N‐TiO₂ hollow spheres are capable of promoting the synthesis of active esters of N‐hydroxyimide and alcohol through simultaneous selective oxidation of alcohol to aldehyde followed by cross‐dehydrogenative coupling (CDC) under ambient conditions upon irradiation of visible light. It is possible to develop a novel and cost‐effective one‐pot strategy for the synthesis of important esters and amides on gram scale using the developed strategy. The catalytic activity of N‐TiO₂ hollow spheres is much superior to that of other reported N‐TiO₂ samples as well as TiO₂ with varying morphology.     

Optimization of preparation of thermally stable cellulose nanofibrils via heat‐induced conversion of ionic bonds to amide bonds

Improving the thermal stability of nanocelluloses is important for practical applications such as melt compounded nanocellulose‐reinforced polymer composites and flexible substrates for nanocellulose‐containing electronic devices. Here, we report optimum conditions for a straightforward surface modification strategy for improving the thermal stability of 2,2,6,6‐tetramethypiperidine‐1‐oxyl (TEMPO)‐oxidized cellulose nanofibrils (TOCNs); the heat‐induced conversion of TOCN alkyl ammonium carboxylates to amides. Different amine‐terminated compounds (R‐NH₂) were grafted onto the surface of TOCNs under aqueous conditions. The influences of R‐NH₂ molecular weight, R‐NH₂/TOCN‐COOH molar ratio, and thermal stability of R‐NH₂ on the properties of the grafted TOCN films were investigated through infrared spectroscopy and thermogravimetric analysis. For maximum thermal improvement of up to 90 °C, complete ionic bonding of TOCN carboxy groups with R‐NH₂ was required, as well as proper selection of the R‐NH₂ compound. A controlled heating process was also needed to achieve effective ionic‐to‐amide bond conversion. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1750–1756     

Effective removal of 2,4,6‐trinitrophenol over hexagonal metal–organic framework NH2‐MIL‐88B(Fe)

A nanostructured organic–inorganic framework, hexagonal NH₂‐MIL‐88B, has been prepared through a facile one‐pot reflux reaction and then it was characterized using various techniques. The as‐prepared sample with high specific surface area (414 m² g^?1) showed excellent adsorption for 2,4,6‐trinitrophenol (TNP) in the liquid phase. Detailed studies of the adsorption kinetics, adsorption mechanism, adsorption isotherm, activation energy and various thermodynamic parameters were conducted. The adsorption mechanism of NH₂‐MIL‐88B for TNP may be ascribed to hydrogen bond interaction, and the complexation between ─OH in TNP and unsaturated Fe(III) on the surface of NH₂‐MIL‐88B. The maximum adsorption capacity of NH₂‐MIL‐88B for TNP based on the Langmuir isotherm was 163.66 mg g^?1. The as‐prepared NH₂‐MIL‐88B adsorbent seems to be a promising material in practice for TNP removal from aqueous solution.     

Tuning CO2 Uptake and Reversible Iodine Adsorption in Two Isoreticular MOFs through Ligand Functionalization

The synthesis and characterization of two isoreticular metal–organic frameworks (MOFs), {[Cd(bdc)(4‐bpmh)]}_n?2 n(H₂O) ( 1 ) and {[Cd(2‐NH₂bdc)(4‐bpmh)]}_n?2 n(H₂O) ( 2 ) [bdc=benzene dicarboxylic acid; 2‐NH₂bdc=2‐amino benzene dicarboxylic acid; 4‐bpmh=N,N‐bis‐pyridin‐4‐ylmethylene‐hydrazine], are reported. Both compounds possess similar two‐fold interpenetrated 3D frameworks bridged by dicarboxylates and a 4‐bpmh linker. The 2D Cd‐dicarboxylate layers are extended along the a‐axis to form distorted square grids which are further pillared by 4‐bpmh linkers to result in a 3D pillared‐bilayer interpenetrated framework. Gas adsorption studies demonstrate that the amino‐functionalized MOF 2 shows high selectivity for CO₂ (8.4 wt % 273 K and 7.0 wt % 298 K) over CH₄, and the uptake amounts are almost double that of non‐functional MOF 1 . Iodine (I₂) adsorption studies reveal that amino‐functionalized MOF 2 exhibits a faster I₂ adsorption rate and controlled delivery of I₂ over the non‐functionalized homolog 1 .     

Stereoselective synthesis and polymerization of Exo‐5‐trimethylsilylnorbornene

Herein the stereoselective two‐step synthesis of pure exo‐5‐trimethylsilylnorbornene is reported. The monomer proved to be highly reactive in both metathesis and addition polymerization. ROMP polymerization was catalyzed by the first‐generation Grubbs catalyst. High‐molecular‐weight saturated addition polymers were prepared using nickel or palladium complexes as precatalysts and Na⁺[B(3,5‐(CF₃)₂C₆H₃)₄]⁻ and/or MAO as cocatalysts. The obtained addition polynorbornenes are highly gas permeable and microporous materials possessing large free volume and BET surface area (up to 540 m²/g). The influence of the substituent orientation (exo‐ vs. exo‐/endo‐mixture) on polymer properties was established. The metathesis polymer based on exo‐isomer exhibits 1.5‐ to 2‐fold increase of permeability coefficients for all gases in comparison to the similar polymer based on the mixture of exo‐ and endo‐isomers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1234–1248     

Synthesis,Water Adsorption,and Proton Conductivity of Solid‐Solution‐Type Metal–Organic Frameworks Al(OH)(bdc‐OH)x(bdc‐NH2)1−x

Mixed‐ligand metal–organic frameworks Al(bdc‐OH)_x(bdc‐NH₂)_1?x (H₂bdc‐NH₂=aminoterepthalic acid, H₂bdc‐OH=hydroxyterephthalic acid) were synthesized and their water adsorption behavior and proton conductivity were investigated. All obtained compounds were isostructural to MIL‐53 (MIL=Materials of Institut Lavoisier) according to XRD measurements under ambient humidity conditions, and were also found to be single phase across the whole mixing ratio from the XRD measurements under humidified conditions. This result clearly shows that all compounds are a solid‐solution‐type mixture of ligands. MIL‐53‐NH₂ adsorbs one water molecule per formula with humidification whereas MIL‐53‐OH adsorbs five water molecules. The mixing ratio of the ligands in Al(OH)(bdc‐OH)_x(bdc‐NH₂)_1?x affected the gate‐opening pressure for water adsorption and total water uptake. Proton conductivity of these compounds largely depends on the adsorbed amount of water, which indicates that the proton conductivity of these compounds depends strongly on the hydrogen‐bond network of the conducting media.     

Soluble polybenzimidazoles with intrinsic porosity: Synthesis,structure, properties and processability

We have explored two novel comonomers, namely, 4,16‐dicarboxyl[2.2]paracyclophane and 5,5′,6,6′‐tetraamino‐3,3,3′,3′‐tetramethyl‐1,1′‐spirobi[indane], for the synthesis of co‐polybenzimidazoles (co‐PBIs) with intrinsic porosity. Both these monomers possess twisted structures that can lead to “awkward” macromolecular shapes that cannot pack efficiently. The consequences of introducing these two monomers on the structure and properties of PBIs are reported. The random copolymers synthesized are amorphous and possess glass transition temperatures (T_gs) greater than 400 °C. T_g decreases with increasing comonomer content indicating an increase in fractional free volume. The copolymers have low surface area. TEM and BET measurements show evidence of mesopore formation. The copolymers show significant carbon dioxide adsorption. Single chain molecular dynamics simulation of 24‐mer repeat units shows intramolecular void spaces arising as a result of distorted polymer chain with reduced conformational mobility. These studies define a new synthetic strategy for “bottoms‐up” synthesis of PBIs with intrinsic porosity. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1046–1057     

Hydrothermal Synthesis of Unique Hollow Hexagonal Prismatic Pencils of Co3V2O8⋅n H2O: A New Anode Material for Lithium‐Ion Batteries

Hollow structures of transition‐metal oxides, particularly mixed‐metal oxides, could be promising for various applications such as lithium‐ion batteries (LIBs). Compared to the synthesis of metal oxide hollow spheres by the template method, non‐spherical metal oxide hollow hexagonal polyhedra have not been developed to date. Herein, we report the controlled hydrothermal synthesis of a new phase of Co₃V₂O₈?n H₂O hollow hexagonal prismatic pencils (HHPPs), which is composed of uniform structural units. By varying the amount of NaOH in the presence of NH₄⁺ and without any template or organic surfactant, the hexagonal prismatic pencils gradually transform from solid into hollow structures, with sizes varying from 5 to 20 μm. The structure of pencils can be preserved only in a limited range of the molar ratio of OH^?/NH₄⁺. As a new anode material for LIBs, such hollow pencils exhibit impressive lithium storage properties with high capacity, good cycling stability, and superior rate capability.     

Permeability and thermal properties of PDMS/LDPE multilayer composite membranes

This work reports on the preparation and properties of polydimethylsiloxane (PDMS)/low‐density polyethylene (LDPE) multilayer composite polymer membranes (MCPM) for gas separation applications. The membranes were produced by combining sequential coating with melt‐extrusion/salt leaching techniques. In particular, the gas sorption and permeation properties at different pressure (40–90 psig) and temperature (27–55 °C) are reported with morphology and thermogravimetric properties. The results show that a 20 μm PDMS layer was able to penetrate the microporous LDPE surface layer substrate leading to improved interfacial adhesion. Based on the different gases (CO₂, CH₄, and C₃H₈) solubility, permeability, and diffusivity obtained, these membranes are seen as good candidates for industrial gas separations. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1045–1052     

Single Crystal to Single Crystal (SC‐to‐SC) Transformation from a Nonporous to Porous Metal–Organic Framework and Its Application Potential in Gas Adsorption and Suzuki Coupling Reaction through Postmodification

A new amino‐functionalized strontium–carboxylate‐based metal–organic framework (MOF) has been synthesized that undergoes single crystal to single crystal (SC‐to‐SC) transformation upon desolvation. Both structures have been characterized by single‐crystal X‐ray analysis. The desolvated structure shows an interesting 3D porous structure with pendent ?NH₂ groups inside the pore wall, whereas the solvated compound possesses a nonporous structure with DMF molecules on the metal centers. The amino group was postmodified through Schiff base condensation by pyridine‐2‐carboxaldehyde and palladium was anchored on that site. The modified framework has been utilized for the Suzuki cross‐coupling reaction. The compound shows high activity towards the C?C cross‐coupling reaction with good yields and turnover frequencies. Gas adsorption studies showed that the desolvated compound had permanent porosity and was microporous in nature with a BET surface area of 2052 m² g^?1. The material also possesses good CO₂ (8 wt %) and H₂ (1.87 wt %) adsorption capabilities.     

Multiarm star nanocarriers containing a poly(ethylene imine) core and polylactide arms

Star polymers (SPs) containing a hyperbranched poly(ethylene imine) (PEI; number‐average molecular weight = 10,000) core and polylactide arms were synthesized via the ring‐opening polymerization of lactide. PEI was used as a multifunctional macroinitiator for the ring‐opening polymerization of lactide. Different lactide monomer/amino‐functional group (LA/NH_n; n = 1 or 2) ratios were used for preparing SPs with different molecular weights. SPs were able to encapsulate small guest molecules such as Rose Bengal; they also transported small, hydrophilic molecules from water to the organic phase. The transport capacity of all the nanocarriers depended on the LA/NH_n ratio used for synthesizing the SPs. Nanocarriers with a higher LA/NH_n ratio had higher transport capacities. The size of all the nanocarriers depended on the type of solvent. In chloroform, these nanoparticles had several sizes that were related to the self‐assembly of these nanocarriers, but in acetone, they were monodisperse, and their size was smaller than that in chloroform. Also, the transport of polar dyes from water to the chloroform phase was possible. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5740–5749, 2006     

Comparisons of glyphosate adsorption properties of different functional Cr‐based metal–organic frameworks

A Cr‐based metal–organic framework, namely, MIL‐101(Cr), was modified with amino (NH₂–) and urea (UR₂–) groups, and the materials were evaluated as adsorbents for glyphosate, and a comparison with commercial activated carbon was also discussed. The effects of the adsorption factors, such as adsorbent concentration, adsorption time, pH and ionic strength were mainly investigated. The results showed that a pseudo‐second‐order rate equation described the adsorption kinetics mechanisms well, while the Langmuir model and the Freundlich model fitted different adsorption isotherms, respectively. Among the adsorbents we studied, NH₂‐MIL‐101(Cr) showed the maximum adsorbing capacity, which is 64.25 mg/g when pH = 3.0, while UR₂‐MIL‐101(Cr) did not reach the best adsorption performance due to the steric hindrance. The work opens up a new way for the modification of metal–organic frameworks for adsorption process.