Effect of molecular weight of macro‐iniferter on electro‐optical properties of polymer dispersed liquid crystal films prepared by iniferter polymerization

Polymer dispersed liquid crystal (PDLC) films were prepared by a devised method, in which photo‐polymerization induced phase separation in a mixtures of a macro‐iniferter, methyl acrylater, and liquid crystal. The morphology of the obtained PDLC films was examined on a polarized optical microscopy, and the effect of molecular weight of MIs on the electro‐optical properties was deliberately investigated. Decreasing the molecular weight of MIs in the films led to formation of larger liquid crystal droplets and a lower V_th values. V_sat increased and the memory effect decreased because of the increased interface anchoring strength induced by the higher molecular weight of polymer matrices. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1530–1534, 2009     

Morphology and bridging properties of (AB)n multiblock copolymers

Motivated by recent experiments (Spontak, R. J.; Smith, S. D. J Polym Sci Part B: Polym Phys 2001, 39, 947) on morphological and mechanical properties of multiblock copolymers (AB)_n, we theoretically elucidate the links between microscopically determined properties, such as the bridging fraction of chains, and mechanical properties of these materials. We do this by applying self‐consistent mean‐field theory to determine morphological aspects such as period and interfacial width and calculate the bridging fractions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 104–111, 2003     

Glass transition and relaxation behavior of epoxy nanocomposites

With advances in nanoscience and nanotechnology, there is increasing interest in polymer nanocomposites, both in scientific research and for engineering applications. Because of the small size of nanoparticles, the polymer–filler interface property becomes a dominant factor in determining the macroscopic material properties of the nanocomposites. The glass‐transition behaviors of several epoxy nanocomposites have been investigated with modulated differential scanning calorimetry. The effect of the filler size, filler loading, and dispersion conditions of the nanofillers on the glass‐transition temperature (T_g) have been studied. In comparison with their counterparts with micrometer‐sized fillers, the nanocomposites show a T_g depression. For the determination of the reason for the T_g depression, the thermomechanical and dielectric relaxation processes of the silica nanocomposites have been investigated with dynamic mechanical analysis and dielectric analysis. The T_g depression is related to the enhanced polymer dynamics due to the extra free volume at the resin–filler interface. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3849–3858, 2004     

Pyrene‐cored covalent organic polymers by thiophene‐based isomers,their gas adsorption,and photophysical properties

Two new pyrene‐cored covalent organic polymers (COPs), CK‐COP‐1 and CK‐COP‐2 , were synthesized via the one‐step polymerization of two thiophene‐based isomers, 1,3,6,8‐tetra(thiophene‐2‐yl) pyrene ( L₁ ) and 1,3,6,8‐tetra(thiophene‐3‐yl) pyrene ( L₂ ). The resulting pyrene‐cored COPs exhibit rather different surface areas of 54 m² g^?1 and 615 m²g^?1 for CK‐COP‐1 and CK‐COP‐2 , respectively. The CO₂ uptake capacities of CK‐COP‐1 and CK‐COP‐2 also show different values of 2.85 and 9.73 wt % at 273 K, respectively. Furthermore, CK‐COP‐2 offers not only a larger CO₂ adsorption capacity but also a better CO₂/CH₄ selectivity at 273 K compared with CK‐COP‐1 . CK‐COP‐1 and CK‐COP‐2 also exhibit considerable differences in their photophysical property. The different structure and properties of CK‐COPs could be attributed to the isomer effect of their corresponding thiophene‐based monomers. © 2017 Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2383–2389     

Permeability and thermal properties of PDMS/LDPE multilayer composite membranes

This work reports on the preparation and properties of polydimethylsiloxane (PDMS)/low‐density polyethylene (LDPE) multilayer composite polymer membranes (MCPM) for gas separation applications. The membranes were produced by combining sequential coating with melt‐extrusion/salt leaching techniques. In particular, the gas sorption and permeation properties at different pressure (40–90 psig) and temperature (27–55 °C) are reported with morphology and thermogravimetric properties. The results show that a 20 μm PDMS layer was able to penetrate the microporous LDPE surface layer substrate leading to improved interfacial adhesion. Based on the different gases (CO₂, CH₄, and C₃H₈) solubility, permeability, and diffusivity obtained, these membranes are seen as good candidates for industrial gas separations. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1045–1052     

Effect of low‐temperature physical aging on the dynamic transitions of atactic polystyrene in the glassy state

The local and cooperative dynamics of atactic PS (a‐PS) were studied by broadband dielectric relaxation spectroscopy (BDRS) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR). The a‐PS has been subjected to thermal rejuvenation and subsequent quenching, short‐term aging (6 weeks), and long‐term aging (1 year) at ambient conditions. Where for the rejuvenated sample only an α‐ and a γ‐relaxation is observed, short‐term aging results in an additional β*‐relaxation that merges with the α‐relaxation at longer aging times. The γ‐relaxation is increasing in intensity and activation energy during aging. The α‐process shows no spectral changes and shift in the relaxation time upon aging. This may be attributed to a possible erasure of history of the material during the temperature‐sweep mode measurement. Fourier transform infrared spectroscopy (FTIR) results suggest that the energetically favorable trans‐trans (tt) conformers are increased in population with aging. © 2019 The Authors. Journal of Polymer Science Part B: Polymer Physics published by Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1394–1401     

Thermal and mechanical analysis of metallocene‐catalyzed ethene–α‐olefin copolymers: The influence of the length and number of the crystallizing side chains

Copolymers of ethene and 1‐octene, 1‐dodecene, 1‐octadecene, and 1‐hexacosene were carried out with [Ph₂C(2,7‐di‐^tertBuFlu)(Cp)]ZrCl₂/methylalumoxane as a catalyst to obtain short‐chain branched polyethylenes with branch lengths of 6–26 carbon atoms. This catalyst provided high activity and a very good comonomer and hydrogen response. In this study, the influence of the length and number of the side chains on the mechanical properties of the materials was investigated. The crystalline methylene sequence lengths of the copolymers and lamellar thicknesses were calculated after the application of a differential scanning calorimetry/successive self‐annealing separation technique. By dynamic mechanical analysis, the storage modulus as an indicator of the stiffness and the loss modulus as a measure of the effect of branching on the α and β relaxations were studied. The results were related to the measurements of the polymer density and tensile strength to determine the effect of longer side chains on the material properties. The hexacosene copolymers had side chains of 24 carbons and remarkable material properties very different from those of conventional linear low‐density polyethylenes. The side chains of these copolymers crystallized with one another and not only parallel to the backbone lamellar layer, depending on the hexacosene concentration in the copolymer. The side chains crystallized even at low hexacosene concentrations in the copolymer. A transfer of these results to 16 carbons side chains in ethene–octadecene copolymers was also possible. © 2006 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1600–1612, 2006     

Physical and dielectric properties of poly(vinylidene fluoride)/polybenzimidazole functionalized graphene nanocomposites

Polymer‐based nanocomposites with good dielectric behavior have engrossed research devotion because of their distinctive benefits in electronic applications. An in situ synthetic process for the polybenzimidazole functionalized graphene oxide (GBI) and its nanocomposite with poly(vinylidene fluoride) (PVDF) is described. GBI shows good dispersion in the bulk PVDF matrix implying a strong interaction of polybenzimidazole with PVDF as evident from morphological and FTIR studies. A gradual increment of GBI in PVDF increases its piezoelectric β‐polymorph formation with a maximum of 73% for 10 wt % GBI in PVDF (GBF10) which also exhibits highest thermal stability. An exhaustive study of frequency dependent electrical properties of GBF10 indicates significantly higher dielectric constant (61), low dielectric loss (0.42), and low AC conductivity value of 1.17 × 10^?10 S/cm at 100 Hz which are the key properties of a suitable capacitor. GBF10 also shows hydrophobic behavior (water uptake 2.89%) and low swelling ratio (1.143), providing an opportunity to use the composite film in fuel cell application. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 189–201     

Influence of sample preparation and processing on observed glass transition temperatures of polymer nanocomposites

Polymer composites composed of poly(methyl methacrylate) (PMMA) and silica (14 nm diameter) have been investigated. The influences of sample preparation and processing have been probed. Two types of sample preparation methods were investigated: (i) solution mixture of PMMA and silica in methyl ethyl ketone and (ii) in situ synthesis of PMMA in the presence of silica. After removing all solvent or monomer, as confirmed using thermogravimetric analysis, and after compression molding, drops in T_g of 5–15 °C were observed for all composites (2–12% w/w silica) and even pure polymer reference samples. However, after additional annealing for 72 h at 140 °C, all previously observed drops in T_g disappeared, and the intrinsic T_g of bulk, pure PMMA was again observed. This is indicative of nonequilibrium trapped voids being present in the as‐molded samples. Field‐emission scanning electron microscopy was used to show well‐dispersed particles, and dynamic mechanical analysis was used to probe the mechanical properties (i.e., storage modulus) of the fully equilibrated composites. Even though no equilibrium T_g changes were observed, the addition of silica to the PMMA matrices was observed to improve the mechanical properties of the glassy polymer host. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2270–2276, 2007     

Extraordinarily large swelling energy of iodine‐treated poly(vinyl alcohol) demonstrated by jump of a film

Organic material characteristics of volume change and stress generation have attracted the attention of many researchers aiming to develop chemomechanical systems such as artificial muscles and polymer engines having the advantages of high energy density and silent operation. Although polymer gels offer a relatively large actuator stroke, their mechanical properties are relatively poor and the working temperature is relatively low, often limited by the evaporation of liquid if contained. We have developed an iodine‐treated poly(vinyl alcohol) having extraordinarily large vapor‐induced deswelling stress reaching 59 MPa, which is one to two orders of magnitude greater than those of ordinary polymer gels. Furthermore, this material has extremely large volumetric and gravimetric energy densities reaching 1.3 × 10⁶ J m^?3 and 9.6 × 10² J kg^?1, respectively, and an elastic modulus of a few GPa and is heat‐resistant to at least 200 °C. The high performance of this material can be demonstrated by a jump of a film. © 2014 The Authors. Journal of Polymer Science Part B: Polymer Physics published by Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1357–1365     

Fluorinated comblike homopolymers: The effect of spacer lengths on surface properties

A series of polyacrylate monomers with F‐alkylalkyl [F(CF₂)_n(CH₂)_n′] side groups were prepared by free‐radical polymerization. The effect of the chemical structure on the surface properties of poly(ethylene terephthalate)s was evaluated by variations in the relative length of the fluorocarbon and hydrocarbon units in the side group. The resulting polymers were quite surface‐active in the solid state. The surface and bulk organization was investigated by X‐ray photoelectron spectroscopy analysis. A strong correlation between the bulk organization and surface properties of the polymers was established. The outmost layer, formed from trifluoromethyl groups and some ester functions, suggests that the side chain is arranged irregularly in the polymer–air interface. The length of the lateral chain governs this organization: long fluorinated chains and short hydrocarbon spacers are essential elements of the molecular design for such low‐surface‐energy materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3737–3747, 2005     

Interfacial adsorption characteristics of ionic polymeric amphiphiles with comb‐like structures: Effect of dodecyl and poly(ethylene oxide) side chains

Two sets of terpolymers, polymer A and polymer B consisting of almost same level of 2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid (AMPS) component at 0.635 ± 0.005 m and varying dodecyl methacrylate (DoDMAc) and monomethoxy poly(ethylene glycol) acrylate (PEGAc) components have been designed. Polymer A, consisting of less C₁₂ component, has been shown to promote intermolecular aggregated structures wherein C₁₂ domains exhibit compact packing characteristics. It is demonstrated that in polymer B, AMPS segments are predominantly present as ionic clusters contributing to a high pKa at about 9.50 for a low α of 0.20. From the results of interfacial adsorption estimations at air/solution and water/hexane interface, it is shown that open coil structures provided under high pH (>9.0) conditions promote efficiency of adsorption. This is shown from higher surface excess concentration (Γ) and lower interfacial area (a) estimated using Gibbs adsorption isotherm equation. For example, at water/hexane interface, polymer A exhibits Γ of 1.20 × 10^?3 moles/1000 m² at pH 3.2 and 1.97 × 10^?3 moles/1000 m² at pH 10.0. Significantly, in case of polymer B consisting of ionic clusters of AMPS, adsorption at the liquid/liquid interface is more efficient in comparison to polymer A at all pH. © 2008 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 46: 3257–3271, 2008     

Charge transport and structure in semimetallic polymers

Owing to changes in their chemistry and structure, polymers can be fabricated to demonstrate vastly different electrical conductivities over many orders of magnitude. At the high end of conductivity is the class of conducting polymers, which are ideal candidates for many applications in low‐cost electronics. Here, we report the influence of the nature of the doping anion at high doping levels within the semi‐metallic conducting polymer poly(3,4‐ethylenedioxythiophene) (PEDOT) on its electronic transport properties. Hall effect measurements on a variety of PEDOT samples show that the choice of doping anion can lead to an order of magnitude enhancement in the charge carrier mobility > 3 cm²/Vs at conductivities approaching 3000 S/cm under ambient conditions. Grazing Incidence Wide Angle X‐ray Scattering, Density Functional Theory calculations, and Molecular Dynamics simulations indicate that the chosen doping anion modifies the way PEDOT chains stack together. This link between structure and specific anion doping at high doping levels has ramifications for the fabrication of conducting polymer‐based devices. © 2017 The Authors. Journal of Polymer Science Part B: Polymer Physics Published by Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 97–104     

Organic–inorganic polyurethanes with double decker silsesquioxanes in the main chains: Morphologies,surface hydrophobicity,and shape memory properties

In this contribution, we reported an investigation of the morphologies, surface hydrophobicity, and shape memory properties of the organic–inorganic polyurethanes with double decker silsesquioxane (DDSQ) in the main chains. It was found that the organic–inorganic polyurethanes were microphase‐separated and that the POSS cages in the main chains were self‐organized into the spherical microdomains with the size of 10–50 nm in diameter. The introduction of POSS cages into the main chains resulted in the enhancement of glass transition temperatures (T_g's). In the meantime, the surface dewettability of the materials was significantly enhanced. X‐ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) indicates the improvement of the surface hydrophobicity resulted from the enrichment of POSS at the surfaces of the polyurethanes. The mechanical analyses, such as dynamic mechanical analysis (DMA) and creep‐recovery analysis (CRA), indicate that the POSS microdomains dispersed in the polyurethanes behaved as the physical crosslinking sites and promoted the formation of the crosslinked networks. Owing to the introduction of DDSQ into the main chains, the organic–inorganic polyurethanes significantly displayed shape memory properties, in marked contrast to the unmodified and linear polyurethane. The shape memory behavior has been addressed on the formation of the strong physically crosslinked networks in the organic–inorganic polyurethanes. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 893–906     

Toughness enhancers for bone scaffold materials based on biocompatible photopolymers

Providing access to the benefits of additive manufacturing technologies in tissue engineering, vinyl esters recently came into view as appropriate replacements for (meth)acrylates as precursors for photopolymers. Their low cytotoxicity and good biocompatibility as well as favorable degradation behavior are their main assets. Suffering from rather poor mechanical properties, particularly in terms of toughness, several improvements have been made over the last years. Especially, thiol–ene chemistry has been investigated to overcome those shortcomings. In this study, we focused on additional means to further improve the toughness of an already established biocompatible vinyl ester‐thiol formulation, eligible for digital light processing‐based stereolithography. All molecules were based on poly(ε‐caprolactone) as building block and the formulations were tested regarding their reactivity and the resulting mechanical properties. They all performed well as toughness enhancer, ultimately doubling the impact resistance of the reference system. © 2018 The Authors. Journal of Polymer Science Part A: Polymer Chemistry published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 110–119     

Stiffness quantification of conductive polymers for bioelectrodes

Conductive polymer (CP) coatings can improve the performance of metallic bioelectrodes in implantable devices, a benefit which is partially attributed to the “softer” material interface. However, due to the nature of CP fabrication on metallic substrates, accurate quantification of mechanical properties has been difficult to achieve. This study demonstrates that peak‐force quantitative nanomechanical mapping (PF‐QNM) is a robust technique for determining the modulus of CP coatings. The effect of dopant size, chemistry, and film hydration on the mechanical properties of poly(3,4‐ethylene dioxythiophene) (PEDOT) is also examined. Analysis of PEDOT doped with poly(styrene sulfonate) produced across five different thicknesses confirms the utility of PF‐QNM in yielding quantitative, repeatable moduli in both the dry and hydrated state. By doping PEDOT with paratoluene sulfonate and perchlorate (ClO₄) it is shown that the hydrophilicity and the size of the dopant are both critical factors influencing CP mechanical properties in the hydrated environment. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 666–675     

Effects of Moisture on the Mechanical Properties of Microcrystalline Cellulose and the Mobility of the Water Molecules as Studied by the Hybrid Molecular Mechanics–Molecular Dynamics Simulation Method

A hybrid molecular mechanics–molecular dynamics simulation method has been performed to study the effects of moisture content on the mechanical properties of microcrystalline cellulose (MCC) and the mobility of the water molecules. The specific volume and diffusion coefficient of the water increase with increasing moisture content in the range studied of 1.8–25.5 w/w%, while the Young's modulus decreases. The simulation results are in close agreement with the published experimental data. Both the bound scission and free‐volume mechanisms contribute to the plasticization of MCC by water. The Voronoi volume increases with increasing moisture content. It is related to the free volume and the increase enhances the mobility of the water molecules and thus increases the coefficient of diffusion of the water. Moreover, with increasing moisture content, the hydrogen bonding per water molecule between MCC–water molecules decreases, thus increasing the water mobility and number of free water molecules. © 2019 The Authors. Journal of Polymer Science Part B: Polymer Physics published by Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 454–464     

Properties of acyl modified poly(glycerol‐adipate) comb‐like polymers and their self‐assembly into nanoparticles

There is an increasing need to develop bio‐compatible polymers with an increased range of different physicochemical properties. Poly(glycerol‐adipate) (PGA) is a biocompatible, biodegradable amphiphilic polyester routinely produced from divinyl adipate and unprotected glycerol by an enzymatic route, bearing a hydroxyl group that can be further functionalized. Polymers with an average Mn of ～13 kDa can be synthesized without any post‐polymerization deprotection reactions. Acylated polymers with fatty acid chain length of C₄, C₈, and C₁₈ (PGAB, PGAO, and PGAS, respectively) at different degrees of substitution were prepared. These modifications yield comb‐like polymers that modulate the amphiphilic characteristics of PGA. This novel class of biocompatible polymers has been characterized through various techniques such as FT‐IR, ¹H NMR, surface, thermal analysis, and their ability to self‐assemble into colloidal structures was evaluated by using DLS. The highly tunable properties of PGA reported herein demonstrate a biodegradable polymer platform, ideal for engineering solid dispersions, nanoemulsions, or nanoparticles for healthcare applications. © 2016 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3267–3278     

Synthesis of reactive three‐arm star‐shaped oligoimides with narrow molecular weight distribution

Series of star‐shaped three arms oligoimides (SOI) with terminal amino groups with narrow MWD ((M_w/M_n = 1.1–2) was synthesized by the one‐stage high‐temperature polycondensation in molten benzoic acid at 140 °C. The (B3+AB′) approach with the “slow addition of monomer” method was used for this synthesis, where B3 is 2,4,6‐tris(4‐aminophenoxy)toluene and AB′ is 3‐aminophenoxy phthalic acid. The SOI arm's length was controlled by the AB′/B3 mole ratio of 10:1, 20:1, 40:1, and 100:1. By the reaction of SOI's terminal amino groups with acetic anhydride, corresponding acetamide derivatives were obtained. SOI synthesized are soluble in selected organic solvents. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2004–2009     

Apparent depth‐dependent modulus and hardness of polymers by nanoindentation: Investigation of surface detection error and pressure effects

Nanoindentation is a widely used technique to characterize the mechanical properties of polymeric materials at the nanoscale. Extreme surface stiffening has been reported for soft polymers such as poly(dimethylsiloxane) (PDMS) rubber. Our recent work [J. Polym. Sci. Part B Polym. Phys. 2017 , 55, 30–38] provided a quantitative model which demonstrates such extreme stiffening can be associated with experimental artifacts, for example, error in surface detection. In this work, we have further investigated the effect of surface detection error on the determination of mechanical properties by varying the sample modulus, instrument surface detection criterion, and probe geometry. We have examined materials having Young's moduli from ∼2 MPa (PDMS) to 3 GPa (polystyrene) using two different nanoindentation instruments (G200 and TI 950) which implement different surface detection methods. The results show that surface detection error can lead to apparent large stiffening. The errors are lower for the stiffer materials, but can still be significant if care is not taken to establish the range of the surface detection error in a particular experimental situation. We have also examined the effect of pressure beneath the probe on the nanoindentation‐determined modulus of polystyrene with different probe geometries. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 414–428