Poly(arylene ether)s with pendant diphenyl phosphoryl groups: Synthesis,characterization, and thermal properties

A series of poly(arylene ether)s, (PAEs), carrying a pendant diphenyl phosphoryl group were prepared via the nucleophilic aromatic substitution (NAS) reactions of 3,5‐difluorotriphenylphosphine oxide, 6 . The difluoro monomer 6 was synthesized via two‐step reaction sequence and subsequently characterized by ¹H, ¹³C, ¹⁹F, and ³¹P NMR spectroscopy, GC/MS, and elemental analysis. The reactivity of the electrophilic sites in 6 , activated by only a diphenylphosphoryl group located in the meta‐position, in 6 was probed via NMR spectroscopy and model reactions and was determined to be sufficient to undergo typical NAS reactions. High molecular weight, amorphous, organic soluble poly(arylene ether)s, bearing a pendant diphenylphosphoryl group, were prepared via the reaction of 6 with a variety of bis‐phenols under typical NAS conditions. The poly(arylene ether)s were characterized for structure via the use of ¹H, ¹³C, and ³¹P NMR spectroscopy while their thermal properties were evaluated using DSC and TGA analysis. The glass transition temperatures (T_g) of the synthesized PAEs ranged from 143 to 175 °C, while their 5% weight loss temperatures ranged from 467 to 510 °C under nitrogen and from 470 to 526 °C in air. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and evaluation of properties of novel poly(benzimidazole‐amide)s

Novel aromatic polyamides have been prepared by a combination of diacids containing preformed benzimidazole rings and aromatic diamines. By the phosphorylation method of polycondensation, polymers of high molecular weight (inherent viscosities between 0.81 and 2.13 dL/g) were obtained, which showed good solubility in polar aprotic solvents. The combination of aromatic amide linkages and benzimidazole rings along the polymer chain endowed the polymers with high thermal resistance and excellent mechanical properties. Glass transition temperatures fell in the range of 290–330 °C as measured by differential scanning calorimetry, and initial decomposition temperatures under nitrogen were over 480 °C as measured by thermogravimetric analysis. Some polymer films showed outstanding tensile strength (over 150 MPa) and moduli (up to 5 GPa). The presence of benzimidazole rings in the current polyamides greatly enhanced their hydrophilicity in comparison with classical wholly aromatic polyamides; thus, although aromatic polyamide films normally show water sorption values of only 4–8%, some of the current poly(benzimidazole amide)s show water sorption up to 19% in a 65% relative humidity atmosphere. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7566–7577, 2008     

Synthesis,characterization, and electroluminescence properties of poly(fluorenevinylene benzobisthiazoles)

A series of vinylene‐linked copolymers based on electron‐deficient benzobisthiazole and electron‐rich fluorene moieties were synthesized via Horner–Wadsworth–Emmons polymerization. Three different polymers P1 , P2 , and P3 , were prepared bearing octyl, 3,7‐dimethyloctyl, and 2‐(2‐ethoxy)ethoxyethyl side chains, respectively. The polymers all possessed moderate molecular weights, good solubility in aprotic organic solvents, and high fluorescence quantum efficiencies in dilute solutions. P2 , which bore branched 3,7‐dimethyloctyl side chains, exhibited better solubility than the other polymers, but also exhibited the lowest thermal decomposition temperature of all polymers. Overall, the impact of the side chains on the polymers optical properties in solution was negligible as all three polymers gave similar absorption and emission spectra in both solution and film. Guest‐host light‐emitting diodes using dilute blends of the polymers in a poly(N‐vinylcarbazole) host gave blue‐green emission with P2 exhibiting the highest luminous efficiency, 0.61 Cd/A at ～500 nm. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis,photoluminescence, and electrochromism of novel aromatic poly(amine‐1,3,4‐oxadiazole)s bearing anthrylamine chromophores

Two novel poly(amine‐hydrazide)s were prepared from the polycondensation reactions of the dicarboxylic acid, 9‐[N,N‐di(4‐carboxyphenyl)amino]anthracene ( 1 ), with terephthalic dihydrazide ( TPH ) and isophthalic dihydrazide ( IPH ) via the Yamazaki phosphorylation reaction, respectively. The poly(amine‐hydrazide)s were readily soluble in many common organic solvents and could be solution cast into transparent films. Differential scanning calorimetry (DSC) indicated that these hydrazide polymers had glass‐transition temperatures (T_g) in the range of 182–230 °C and could be thermally cyclodehydrated into the corresponding oxadiazole polymers in the range of 300–400 °C. The resulting poly(amine‐1,3,4‐oxadiazole)s had useful levels of thermal stability associated with high T_g (263–318 °C), 10% weight‐loss temperatures in excess of 500 °C, and char yield at 800 °C in nitrogen higher than 55%. These organo‐soluble anthrylamine‐based poly(amine‐hydrazide)s and poly (amine‐1,3,4‐oxadiazole)s exhibited maximum UV‐vis absorption at 346–349 and 379–388 nm in N‐methyl‐2‐pyrrolidone (NMP) solution, respectively. Their photoluminescence spectra in NMP solution showed maximum bands around 490–497 nm in the green region. The poly(amine‐hydrazide) I ‐ IPH showed a green photoluminescence at 490 nm with PL quantum yield of 29.9% and 17.0% in NMP solution and film state, respectively. The anthrylamine‐based poly(amine‐1,3,4‐oxadiazole)s revealed a electrochromic characteristics with changing color from the pale yellow neutral form to the red reduced form when scanning potentials negatively from 0.00 to ?2.20 V. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1584–1594, 2009     

Synthesis and properties of fluorene‐based polyheteroarylenes for photovoltaic devices

Novel copolymers consisting of the alternating push–pull comonomers fluorene and thieno[3,4‐b]pyrazine/quinoxaline were synthesized by a palladium‐catalyzed Suzuki cross‐coupling reaction in 60–80% yields. The structure of the deeply colored copolymers was confirmed with ¹H and ¹³C NMR. All the new materials were characterized with spectroscopic and electrochemical methods. Bulk heterojunction organic solar cells based on some of the novel polymers in combination with the well‐known fullerene acceptor [6,6]‐phenyl C₆₁–butyric acid methyl ester were fabricated, and their photovoltaic parameters were measured. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6952–6961, 2006     

Synthesis,characterization, and photovoltaic properties of dithienylbenzobisazole‐dithienylsilole copolymers

Three conjugated polymers comprised of dioctyl‐dithieno‐[2,3‐b:2',3'‐d]silole and a donor‐acceptor‐donor triad of either cis‐benzbisoxazole, trans‐benzobisoxazole or trans‐benzobisthiazole were synthesized via the Stille cross‐coupling reaction. The impact of varying the heteroatoms and/or the location within the benzobisazole moiety on the optical and electronic properties of the resulting polymers was evaluated via cyclic voltammetry and UV‐Visible spectroscopy. All of the polymers have similar optical band‐gaps of ～1.9 eV and highest occupied molecular orbital levels of ? 5.2 eV. However, the lowest unoccupied molecular orbitals (LUMO) ranged from ? 3.0 to ? 3.2 eV. Interestingly, when the polymers were used as donor materials in bulk‐heterojunction photovoltaic cells with PC₇₁BM as the electron‐acceptor, the benzobisoxazole‐based polymers gave slightly better results than the benzobisthiazole‐containing polymers with power conversion efficiencies up to 3.5%. These results indicate that benzobisoxazoles are promising materials for use in OPVs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1533–1540     

Novel heterocyclic poly(arylene ether ketone)s: Synthesis and polymerization of 4‐(4′‐hydroxyaryl)(2H)phthalazin‐1‐ones with methyl groups

Based on green chemistry, a simple and efficient direct synthesis of 4‐(4′‐hydroxyaryl)(2H)phthalazin‐1‐ones ( 2a–2f ) was developed in a two‐step reaction, in which the Friedel–Crafts acylation reaction of six phenols with phthalic anhydride was initially carried out and then followed by cyclization with hydrazine hydrate in good to excellent yields with high regioselectivity. A number of novel heterocyclic poly(arylene ether ketone)s were prepared conveniently from several unsymmetrical, twist, and noncoplanar phthalazinone‐containing monomers ( 2a–2f ) and an activated difluoro monomer via a N? C coupling reaction. It was very interesting that the obtained monomers and polymers exhibited diverse properties with the variation of the number and location of the substituted methyl groups. All these polymers had a high molecular weight with M_n and η_inh in the range of 44,960–169,000 Da and 0.38–0.79 dL/g, respectively. Actually, the obtained polymers displayed excellent thermal properties with T_g's ranging from 222 to 248 °C and 5% weight loss temperatures in nitrogen higher than 430 °C. Moreover, these polymers were readily soluble in common organic solvents, such as N‐methyl‐2‐pyrrolidone, chloroform, pyridine, and m‐cresol, and could be cast into flexible and colorless or nearly colorless films by spin‐coating or casting processes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1525–1535, 2007     

s‐Triazine‐based hyperbranched polyethers: Synthesis,characterization, and properties

A series of s‐triazine‐based hyperbranched polyethers (HBPE) have been synthesized to obtain thermostability but flexible polymers by an interfacial polycondensation of different diols as A₂ and cyanuric chloride as B₃ monomers using A₂ + B₃ approach in the presence of a phase transfer catalyst. The polymerization reaction parameters are optimized, and the results indicate that the optimum conditions for the interfacial polycondensation are a 2:3 mole ratio of cyanuric chloride to diol using butanediol, benzyldimethylhexadecyl ammonium chloride as the catalyst, dichloromethane as the organic solvent, and a three‐step procedure with keeping the reaction mixture at different low temperatures for 2h/2h/5h. Other techniques such as high‐temperature solution, one‐step polycondensation, and transesterification were also carried out to synthesize the HBPE but proved to be not suitable due to large number of side reactions. The synthesized polymers were characterized by FTIR, ¹H NMR, and ¹³C NMR spectroscopy, hydroxyl number determination, solution viscosity measurements, and GPC analysis. The thermal behavior of the hyperbranched polymer was investigated by thermogravimetric analysis and differential scanning calorimetry. All the results were compared with those from an analogous linear polyether, obtained from 2‐methoxy‐4,6‐dichloro‐s‐triazine and butanediol by using the same polymerization technique. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3994–4004, 2010     

Copolyfluorenes containing bridged triphenylamine or triphenylamine: Synthesis,characterization, and optoelectronic properties

A novel aryl‐bridged triphenylamine derivative, 7‐t‐butyl‐5,5,9,9‐tetraaryl‐13b‐aza‐naphtho[3,2,1‐de]anthracene (ABTPA) was designed and synthesized. The alternating copolymers of ABTPA/dihexylfluorene ( P1 ) and triphenylamine (TPA)/dihexylfluorene ( P2 ) were synthesized by Suzuki coupling reaction. P1 shows excellent thermal stability with a decomposition temperature of 440 °C and a glass‐transition temperature of 326 °C. The HOMO energy levels of the two polymers are very close (?5.15 eV for P1 and ?5.13 eV for P2 ). The maximum absorption peak of P1 is red shifted by 23 nm with respect to P2 , because the incorporation of ABTPA units into the PF backbone enhances the electronic conjugation degree compared with the case of TPA units. The rigidity and the steric hindrance of the ABTPA in P1 result in a small Stokes shift and almost the same emission spectra of P1 between its film and solution. A PLED with simple configurations of ITO/ P1 /TNS (tetranaphthalen‐2‐yl‐silane)/Alq₃ (tris(8‐hydroxyquinolinolato)aluminum)/Al emits a blue light with emission peak at 436 nm, and exhibits a maximum current efficiency of 1.89 cd/A and a maximum luminance of 4183 cd/m², which is superior to the device with P2 as emissive layer under the identical conditions. These results indicate that ABTPA unit could be a very promising candidate to replace TPA unit and find widely application in organic/polymeric optoelectronic materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3651–3661, 2009     

Synthesis and light‐emitting properties of platinum‐containing oligoynes and polyynes derived from oligo(fluorenyleneethynylenesilylene)s

A series of blue‐light‐emitting oligo(fluorenyleneethynylenesilylene)s (OFESs) of the general formula HC?CRC?C(EC?CRC?C)_mEC?CRC?CH (E = SiPh₂, SiMe₂, or SiMe₂? SiMe₂; m = 0–2; R = 9,9‐dihexylfluorene‐2,7‐diyl) and their phosphorescent platinum‐containing oligoynes and polyynes were synthesized and characterized. The solution properties and regiochemical structures of this new structural class of organosilicon‐based polyplatinayne polymers {trans‐[? Pt(PBu₃)₂C ?CRC?C(EC?CRC?C)_mEC?CRC?C? ]_n} were studied with IR and NMR (¹H, ¹³C, ²⁹Si, and ³¹P) spectroscopy. The optical absorption and photoluminescence spectra of these metallopolymers were examined and compared with their discrete oligomeric model complexes. Our studies led to a novel approach of using the sp³‐silyl moiety as a conjugation interrupter to limit the effective conjugation length in metal polyynes, which could boost the phosphorescence decay rates essential for light‐energy harvesting from the triplet excited state. The influence of the heavy platinum atom and the group 14 silyl unit possessing different side‐group substituents on the thermal and phosphorescence properties was investigated in detail. We also established the goal of studying the evolution of the lowest singlet and triplet excited states with chain length m of OFESs and the nature of E in these metallopolymers. This work indicated that the phosphorescence emission efficiency harnessed through the heavy‐atom effect of platinum in the main chain did not change very much with oligomer chain length m but generally decreased with the E group in the order SiMe₂ > SiMe₂? SiMe₂ > SiPh₂. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4804–4824, 2006     

Synthesis and characterization of novel polybenzimidazoles bearing pendant phenoxyamine groups

A novel aromatic diacid, 3, 5‐dicarboxyl‐4′‐amino diphenyl ether, containing pendant phenoxy amine group was synthesized. Homo‐ and co‐polybenzimidazoles containing different content of pendant phenoxyamine groups were synthesized by condensation of 3,3′‐diaminobenzidine with this acid and a mixture of this acid and isophthalic acid in different ratio in polyphosphoric acid. Copolybenzimidazoles with structural variations were also synthesized based on this acid and pyridine dicarboxylic acid, terephthalic acid, adipic acid, or sebacic acid. The polymers have good solubility in polar aprotic solvents and strong acids and they form tough flexible films by solution casting. The polymers were characterized by different instrumental techniques (FTIR, TGA, DSC, XRD, etc.) and for solvent solubility, mechanical properties, inherent viscosity, and proton conductivity. The inherent viscosities of the polymers vary in the range of 0.62–1.52 dL/g. They have high thermal stability up to 475–506 °C (IDT) in nitrogen, high glass transition temperatures (T_g) ranging from 313 to 435 °C and good tensile strength ranging from 58 to 125 MPa. Proton conductivity of homo polymer is 3.72 × 10^?3 S/cm at 25 °C and 2.45 × 10^?2 S/cm at 200 °C © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5776–5793, 2008     

Synthesis and properties of fluorine‐containing poly(aryl ether oxadiazole)s

Fluorine‐containing poly(aryl ether 1,3,4‐ozadiazole)s were synthesized by the nucleophilic aromatic substitution reaction of 2,5‐bis(2,3,4,5,6‐pentafluorophenyl)‐1,3,4‐oxadiazole and various bisphenols in the presence of potassium carbonate. The polymerizations were carried out at 30 °C in 1‐methyl‐2‐pyrrolidinone to avoid the gelation caused by a crosslinking reaction at para and ortho carbons to the 1,3,4‐oxidiazole ring. The obtained polymers were all para‐connected linear structures. The obtained fluorine‐containing poly(aryl ether 1,3,4‐ozadiazole)s showed excellent solubility and afforded tough, transparent films by the solution‐casting method. They also exhibited a high glass transition temperature depending on the molecular structure, and the glass transition temperature could be controlled by the bisphenols in the range of 157–257 °C. They showed good thermal stability and excellent hydrophobicity due to the incorporation of the 2,3,5,6‐tetrafluoro‐1,4‐phenylene moiety. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2855–2866, 2007     

Exhaustive and partial alkoxylation of polymethylhydrosiloxane by copper‐catalyzed dehydrocoupling with alcohols: Synthesis,crosslinking behavior,and thermal properties of the products

Polymethylhydrosiloxane (PMHS) reacts with aliphatic and aromatic alcohols at room temperature in the presence of [CuH(PPh₃)]₆ complex catalyst to give poly[(methyl) (alkoxy)siloxane]s in high yields. Reactivity of alcohols decreases in the order of p‐methoxyphenol > p‐cresol > phenol > benzyl alcohol > allyl alcohol > ethanol > isopropanol > tert‐butyl alcohol. Partially p‐cresylated polymers, which still retain unreacted Si? H bonds, react further with ethylene glycol or water to form cross‐linked polymers, which, depending on the extent of cross linking, gelate during the cross‐linking process. Propargyl alcohol reacts with PMHS very rapidly to give exhaustively and partially propargyloxylated PMHS. Resulting polymers, upon heating, undergo crosslinking. Partially propargyloxylated polymers display high thermal stability [T_d5 (temperature of 5% weight loss) > 500 °C] as compared with starting PMHS (243 °C) and exhaustively propargyloxylated one (414 °C). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Access to nonisocyanate poly(thio)urethanes: A comparative study

This article describes the synthesis of new cyclic compounds able to react with amines to get nonisocyanate polyurethanes (NIPUs). The contribution of the most studied five‐membered cyclic carbonate was compared to five‐membered cyclic dithiocarbonate analogous and to a six‐membered cyclic carbonate. Difunctional reactive species were obtained by a simple substitution reaction or an efficient thiol–ene coupling reaction. The products, obtained with high yields, were characterized by 1H NMR, 13C NMR, and Fourier tansform infrared spectroscopy analysis. The dicyclocarbonates were then used to synthesize NIPUs by step growth polymerization with several diamines. These materials exhibited glass transition temperatures from 19 to ?29 °C, molar mass from 1800 to 20,400 g mol^?1, and a 20% mass loss temperature (T_d = 20%) between 249 and 296 °C. Such materials are interesting candidates for coating applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3284–3296     

Synthesis and properties of blue light‐emitting,silicon‐containing,regio‐ and stereoregular conjugated polymers

This article concerns the hydrosilylation polyaddition of 1,4‐bis(dimethylsilyl)benzene ( 1 ) with 4,4′‐diethynylbiphenyl, 2,7‐diethynylfluorene ( 2b ), and 2,6‐diethynylnaphthalene with RhI(PPh₃)₃ catalyst. Trans‐rich polymers with weight‐average molecular weights (M_w's) ranging from 19,000 to 25,000 were obtained by polyaddition in o‐Cl₂C₆H₄ at 150–180 °C, whereas cis‐rich polymers with M_w's from 4300 to 34,000 were obtained in toluene at 0 °C–r.t. These polymers emitted blue light in 4–81% quantum yields. The cis polymers isomerized into trans polymers upon UV irradiation, whereas the trans polymers did not. The device having a layer of polymer trans‐ 3b obtained from 1 and 2b demonstrated electroluminescence without any dopant. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2774–2783, 2004     

Silole‐containing poly(silylenevinylene)s: Synthesis,characterization, aggregation‐enhanced emission,and explosive detection

Hydrosilylation polymerizations of 1,1‐dimethyl‐2,5‐bis(4‐ethynylphenyl)‐3,4‐diphenylsilole with aromatic silylhydrides including 1,4‐bis(dimethylsilyl)benzene, 4,4′‐bis(dimethylsilyl)biphenyl, 2,5‐bis(dimethylsilyl)thiophene, and 2,7‐bis(dimethylsilyl)‐9,9‐dihexylfluorene in the presence of Rh(PPh₃)₃Cl catalyst in refluxed tetrahydrofuran afford a series of silole‐containing poly(silylenevinylene)s. Under optimum condition, the alkyne polyhydrosilylation reactions progress efficiently and regioselectively, yielding polymers with high molecular weights (M_w up to 95,300) and good stereoregularity (E content close to 99%) in high yields (up to 92%). The polymers are processable and thermally stable, with high decomposition temperatures in the range of 420?449 °C corresponding to 5% weight loss. They are weakly fluorescent in the solution state but become emissive in the aggregate and film states, demonstrating their aggregation‐enhanced emission characteristics. The explosive sensing capabilities of the polymers are examined in both solution and aggregate states. The emissions of the polymers aggregates in aqueous mixture are quenched more efficiently by picric acid in an exponential pattern with high quenching constants (up to 27,949 L mol^?1), suggesting that the polymers aggregates are sensitive chemosensors for explosive detection. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

New ladder‐type conjugated polymer with broad absorption,high thermal stability,and low band gap

New ladder‐type π‐conjugated polymer poly{6‐alkyl‐pyrrolo[3,2‐b:4,5‐b′]bis‐[1,4]benzothiazine} ( PPBBTZ ) was synthesized through a simple method. PPBBTZ showed good solubility in organic solvents (such as chloroform, tetrahydrofuran, chlorobenzene, o‐dichlorobenzene) and high thermal stability (decomposition temperatures up to 323 °C and 299 °C in nitrogen and air, respectively). The highest occupied molecular orbital and lowest unoccupied molecular orbital energy level estimated from electrochemistry result and absorption spectrum were ?5.46 and ?3.81 eV, respectively, with a band gap of 1.65 eV. More interestingly, PPBBTZ displayed broad absorption from ultraviolet to visible light regions (200–750 nm). These properties suggested PPBBTZ was a good candidate in opto‐electronics. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and electroluminescent properties of polyfluorene‐based conjugated polymers containing bipolar groups

A bipolar dibromo monomer, bis‐(4‐bromophenyl)[4‐(3,5‐diphenyl‐1,2,4‐ triazole‐4‐yl)‐phenyl]amine ( 9 ), containing electro‐rich triphenylamine and electro‐deficient 1,2,4‐triazole moieties was newly synthesized and characterized. Two fluorescent fluorene‐based conjugated copolymers ( TPAF , TPABTF ) were prepared via facile Suzuki coupling from the dibromo bipolar monomer, 4,7‐dibromo‐2,1,3‐benzothiadiazole ( BTDZ ), and 9,9‐dioctylfluorene. They were characterized by molecular weight determination, IR, NMR, DSC, TGA, solubility, absorption and photoluminescence spectra, and cyclic voltammetry. The polymers showed good solubility in common organic solvents such as dichloromethane, chloroform, tetrahydrofuran, and dichlorobenzene at room temperature. They had glass transition temperatures (T_g) higher than 135 °C and 5% degradation temperatures in nitrogen atmosphere were higher than 428 °C. Single layer polymer light‐emitting diodes (PLED) of ITO/PEDOT:PSS/polymer/metal showed a blue emission at 444 nm and Commission Internationale de I'Eclairage (CIE) 1931 color coordinates of (0.16, 0.13) for TPAF . The device using TPABTF as emissive material showed electroluminescence at 542 nm with CIE1931 of (0.345, 0.625), low turn‐on voltage of 5 V, a maximum electroluminance of 696 cd/m², and a peak efficiency of 2.02 cd/A. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6231–6245, 2009     

Synthesis and photovoltaic properties of 2,6‐bis(2‐thienyl) benzobisazole and 4,8‐bis(thienyl)‐benzo[1,2‐B:4,5‐B′]dithiophene copolymers

In an effort to design efficient low‐cost polymers for use in organic photovoltaic cells the easily prepared donor–acceptor–donor triad of a either cis‐benzobisoxazole, trans‐benzobisoxazole or trans‐benzobisthiazole flanked by two thiophene rings was combined with the electron‐rich 4,8‐bis(5‐(2‐ethylhexyl)‐thien‐2‐yl)‐benzo[1,2‐b:4,5‐b′]dithiophene. The electrochemical, optical, morphological, charge transport, and photovoltaic properties of the resulting terpolymers were investigated. Although the polymers differed in the arrangement and/or nature of the chalcogens, they all had similar highest occupied molecular orbital energy levels (?5.2 to ?5.3 eV) and optical band gaps (2.1–2.2 eV). However, the lowest unoccupied molecular orbital energy levels ranged from ?3.1 to ?3.5 eV. When the polymers were used as electron donors in bulk heterojunction photovoltaic devices with PC₇₁BM ([6,6]‐phenyl C₇₁‐butyric acid methyl ester) as the acceptor, the trans‐benzobisoxazole polymer had the best performance with a power conversion efficiency of 2.8%. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 316–324