Intrinsically microporous polyimides containing spirobisindane and phenazine units: Synthesis,characterization and gas permeation properties

A new diamine containing spirobisindane and phenazine units, namely, 3,3,3′,3′‐tetramethyl‐2,2′,3,3′‐tetrahydro‐1,1′‐spirobi[cyclopenta[b]phenazine]‐7,7′‐diamine (TTSBIDA) was synthesized starting from commercially available 5,5′,6,6′‐tetrahydroxy‐3,3,3′,3′‐tetramethyl‐1,1′‐spirobisindane (TTSBI). TTSBI was oxidized to 3,3,3′,3′‐tetramethyl‐2,2′,3,3′‐tetrahydro‐1,1′‐spirobi[indene]‐5,5′,6,6′‐tetraone (TTSBIQ) which was subsequently condensed with 4‐nitro‐1,2‐phenylenediamine to obtain 3,3,3′,3′‐tetramethyl‐7,7′‐dinitro‐2,2′,3,3′‐tetrahydro‐1,1′‐spirobi[cyclopenta[b]phenazine] (TTSBIDN). TTSBIDN was converted into TTSBIDA by reduction of the nitro groups using hydrazine hydrate in the presence of Pd/C as the catalyst. A series of new polyimides of intrinsic microporosity (PIM‐PIs) were synthesized by polycondensation of TTSBIDA with commercially available aromatic dianhydrides. PIM‐PIs exhibited amorphous nature, high thermal stability (T₁₀ > 480 °C) and intrinsic microporosity (BET surface area = 59–289 m²/g). The gas permeation characteristics of films of selected PIM‐PIs were evaluated and they exhibited appreciable gas permeability as well as high selectivity. The CO₂ and O₂ permeability of PIM‐PIs were in the range 185.4–39.2 and 30.6–6.2 Barrer, respectively. Notably, polyimide derived from TTSBIDA and 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride (PIM‐PI‐6FDA) exhibited high CO₂ and O₂ permeability of 185.4 and 30.6 Barrer with CO₂/CH₄ and O₂/N₂ selectivity of 43.1 and 5.1, respectively. The data of PIM‐PI‐6FDA for CO₂/CH₄ and O₂/N₂ gas pairs were located near Robeson upper bound. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 766–775     

Investigation of gas transport and other physical properties in relation to the bromination degree of polymers of intrinsic microporosity

In this work, the synthesis of novel polymers of intrinsic microporosity (PIMs) with different degrees of bromine substitution by a free-radical substitution reaction was performed. The synthesized polymers were thoroughly characterized and their bromination degree was verified via nuclear magnetic resonance. The brominated PIMs were investigated by infrared spectroscopy, X-ray diffraction, and density measurements and correlated with their gas transport properties. It was found that with an increase in the bromination degree, the synthesized PIMs exhibited a significant increase in polymer chain packing density which led to reduced fractional free volume and consequent decrease in gas diffusion and permeability coefficients. The change in permeability coefficients caused an improvement in the CO₂/N₂, CO₂/CH₄, and O₂/N₂ ideal permeability selectivities. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2752–2761     

Monodentate and bridging behaviour of the sulfur‐containing ligand 4′‐[4‐(methylsulfanyl)phenyl]‐4,2′:6′,4′′‐terpyridine in two discrete zinc(II) complexes with acetylacetonate

The Zn complexes bis(acetylacetonato‐κ²O,O′)bis{4′‐[4‐(methylsulfanyl)phenyl]‐4,2′:6′,4′′‐terpyridine‐κN¹}zinc(II), [Zn(C₅H₇O₂)₂(C₂₂H₁₇N₃S)₂], (I), and {μ‐4′‐[4‐(methylsulfanyl)phenyl]‐4,2′:6′,4′′‐terpyridine‐κ²N¹:N^1′′}bis[bis(acetylacetonato‐κ²O,O′)zinc(II)], [Zn₂(C₅H₇O₂)₄(C₂₂H₁₇N₃S)], (II), are discrete entities with different nuclearities. Compound (I) consists of two centrosymmetrically related monodentate 4′‐[4‐(methylsulfanyl)phenyl]‐4,2′:6′,4′′‐terpyridine (L1) ligands binding to one Zn^II atom sitting on an inversion centre and two centrosymmetrically related chelating acetylacetonate (acac) groups which bind via carbonyl O‐atom donors, giving an N₂O₄ octahedral environment for Zn^II. Compound (II), however, consists of a bis‐monodentate L1 ligand bridging two Zn^II atoms from two different Zn(acac)₂ fragments. Intra‐ and intermolecular interactions are weak, mainly of the C—H...π and π–π types, mediating similar layered structures. In contrast to related structures in the literature, sulfur‐mediated nonbonding interactions in (II) do not seem to have any significant influence on the supramolecular structure.     

Effective enhancement of selectivities and capacities for CO2 over CH4 and N2 of polymers of intrinsic microporosity via postsynthesis metalation

A series of metalized C-PIM-M (M = Na⁺, Mg²⁺, Al³⁺, PIMs = polymers of intrinsic microporosity) materials were prepared from a carboxyl-functionalized PIM (C-PIMs). The C-PIM-Na exhibited a high CO₂ adsorption capacity of 2.44 mmol/g and extreme low CH₄ uptake of 0.28 mmol/g at 273 K and 101 kPa among three metallated PIMs. It showed remarkably high CO₂/CH₄ and CO₂/N₂ selectivities at both 273 and 293 K due to an advantageous pore-blocking effect of Na⁺ cation.     

A series of two‐dimensional lanthanide coordination polymers: synthesis,structures, magnetism and selective luminescence detection for heavy metal ions and toxic solvents

A series of two‐dimensional (2D) coordination polymers (CPs), namely poly[[bis(μ‐acetato)diaqua(μ₆‐biphenyl‐3,3′,5,5′‐tetracarboxylato)bis(N,N‐dimethylacetamide)digadolinium(III)] N,N‐dimethylacetamide monosolvate], {[Gd₂(C₁₆H₆O₈)(C₂H₃O₂)₂(C₄H₉NO)₂(H₂O)₂]·C₄H₉NO}_n ( CP1 ), poly[[bis(μ‐acetato)diaqua(μ₆‐biphenyl‐3,3′,5,5′‐tetracarboxylato)bis(N,N‐dimethylacetamide)didysprosium(III)] N,N‐dimethylacetamide monosolvate], {[Dy₂(C₁₆H₆O₈)(C₂H₃O₂)₂(C₄H₉NO)₂(H₂O)₂]·C₄H₉NO}_n ( CP2 ), poly[bis(μ‐acetato)diaqua(μ₆‐biphenyl‐3,3′,5,5′‐tetracarboxylato)bis(N,N‐dimethylacetamide)dineodymium(III)], [Nd₂(C₁₆H₆O₈)(C₂H₃O₂)₂(C₄H₉NO)₂(H₂O)₂]_n ( CP3 ), poly[bis(μ‐acetato)diaqua(μ₆‐biphenyl‐3,3′,5,5′‐tetracarboxylato)bis(N,N‐dimethylacetamide)disamarium(III)], [Sm₂(C₁₆H₆O₈)(C₂H₃O₂)₂(C₄H₉NO)₂(H₂O)₂]_n ( CP4 ), has been synthesized from rigid biphenyl‐3,3′,5,5′‐tetracarboxylic acid under solvothermal conditions. Their structures have been determined by single‐crystal X‐ray diffraction analyses, elemental analyses, IR spectra, powder X‐ray diffraction and thermogravimetric analyses, and CP1 – CP4 crystallize in the monoclinic space group P2₁/n. CP1 – CP4 are isomorphous and feature similar 2D double layers, which are further extended via interlayer hydrogen‐bonding interactions into a three‐dimensional (3D) supramolecular structure. Hydrogen‐bonding interactions between N,N‐dimethylacetamide molecules and carboxylate O atoms strengthen the packing of the layers. The organic ligands interconnect with metal ions to generate 2D layered structures with a (4,4)‐connected net having {4⁴.6²} topology. CP1 has been investigated for its magnetic properties and magnetic susceptibility measurements were carried out in the range 2.0–300 K. The results of the magnetic measurements show weak antiferromagnetic coupling between the Gd^III ions in CP1 . Moreover, the strong luminescence of CP2 and CP4 can be selectively quenched by the Fe³⁺ ion and toxic solvents (e.g. acetone).     

Bipodal 1,1′‐acyl‐3,3,3′,3′‐tetraalkylbis(thiourea) ligands with flexible C3, C4 and C6 spacer groups

In the structures of 3,3,3′,3′‐tetraethyl‐1,1′‐(propane‐1,3‐diyldicarbonyl)bis(thiourea), C₁₅H₂₈N₄O₂S₂, (I), 3,3,3′,3′‐tetraethyl‐1,1′‐(butane‐1,4‐diyldicarbonyl)bis(thiourea), C₁₆H₃₀N₄O₂S₂, (II), and 3,3,3′,3′‐tetrabutyl‐1,1′‐(hexane‐1,6‐diyldicarbonyl)bis(thiourea), C₂₆H₅₀N₄O₂S₂, (III), compound (I) displays resonance‐assisted hydrogen bonding, (II) exhibits an inversion centre, and both (II) and (III) are characterized by intermolecular hydrogen bonds between the carbonyl O atoms and thioamide H atoms, leading to chains of hydrogen‐bonded molecules throughout the structures. The accurate structural data for these molecules is expected to assist in molecular modelling and other studies currently in progress.     

Synthesis and characterization of aromatic cyclolinear phosphazene polyetherketones containing bis‐Spiro‐substituted cyclotriphosphazene unit

A novel monomer, 2,2‐bis‐(4′‐fluorobenzoylphenoxy)‐4,4,6,6‐bis[spiro‐(2′,2″‐dioxy‐1′, 1′‐biphenylyl)] cyclotriphosphazene, was synthesized and polymerized with 4,4′‐difluorobenzophenone as a comonomer and 4,4′‐isopropylidenediphenol or 4,4′‐(hexafluoroisopropylidene) diphenol in N,N‐dimethylacetamide at 162 °C for 4 h to give two series of aromatic cyclolinear phosphazene polyetherketones containing bis‐spiro‐substituted cyclotriphosphazene groups. The structure of the monomer was confirmed by ¹H, ¹³C, and ³¹P NMR. The effect of the incorporation of the bis‐spiro‐substituted cyclotriphosphazene group on the thermal properties of these polymers was investigated by DSC and thermogravimetric analysis. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2993–2997, 2001     

Synthesis,structure, thermostability and luminescence properties of ZnII and CdII coordination polymers based on dimethysuccinate and flexible 1,4‐bis(imidazol‐1‐ylmethyl)benzene ligands

The design and synthesis of functional coordination polymers is motivated not only by their structural beauty but also by their potential applications. Zn^II and Cd^II coordination polymers are promising candidates for producing photoactive materials because these d¹⁰ metal ions not only possess a variety of coordination numbers and geometries, but also exhibit luminescence properties when bound to functional ligands. It is difficult to predict the final structure of such polymers because the assembly process is influenced by many subtle factors. Bis(imidazol‐1‐yl)‐substituted alkane/benzene molecules are good bridging ligands because their flexibility allows them to bend and rotate when they coordinate to metal centres. Two new Zn^II and Cd^II coordination polymers based on mixed ligands, namely, poly[[μ₂‐1,4‐bis(imidazol‐1‐ylmethyl)benzene‐κ²N³:N^3′]bis(μ₃‐2,2‐dimethylbutanoato‐κ³O¹:O⁴:O^4′)dizinc(II)], [Zn₂(C₆H₈O₄)₂(C₁₄H₁₄N₄)]_n, and poly[[μ₂‐1,4‐bis(imidazol‐1‐ylmethyl)benzene‐κ²N³:N^3′]bis(μ₃‐2,2‐dimethylbutanoato‐κ⁵O¹,O^1′:O⁴,O^4′:O⁴)dicadmium(II)], [Cd₂(C₆H₈O₄)₂(C₁₄H₁₄N₄)]_n, have been synthesized under hydrothermal conditions and characterized by single‐crystal X‐ray diffraction, elemental analysis, IR spectroscopy and thermogravimetric analysis. Both complexes crystallize in the monoclinic space group C2/c with similar unit‐cell parameters and feature two‐dimensional structures formed by the interconnection of S‐shaped Zn(Cd)–2,2‐dimethylsuccinate chains with 1,4‐bis(imidazol‐1‐ylmethyl)benzene bridges. However, the Cd^II and Zn^II centres have different coordination numbers and the 2,2‐dimethylsuccinate ligands display different coordination modes. Both complexes exhibit a blue photoluminescence in the solid state at room temperature.     

A dihydroxidotetracopper(II) framework supported by 4,4′‐(adamantane‐1,3‐diyl)bis(1,2,4‐triazole) and benzene‐1,3,5‐tricarboxylate bridges

The new bifunctional ligand 4,4′‐(adamantane‐1,3‐diyl)bis(1,2,4‐triazole) (tr₂ad) and benzene‐1,3,5‐tricarboxylate sustain complementary coordination bridging for the three‐dimensional framework of poly[[bis[μ₃‐4,4′‐(adamantane‐1,3‐diyl)bis(1,2,4‐triazole)‐κ³N¹:N²:N^1′]bis(μ₄‐benzene‐1,3,5‐tricarboxylato‐κ⁴O¹:O^1′:O³:O⁵)di‐μ₃‐hydroxido‐κ⁶O:O:O‐tetracopper(II)] dihydrate], {[Cu₄(C₉H₃O₆)₂(OH)₂(C₁₄H₁₈N₆)₂]·2H₂O}_n. The net node is a centrosymmetric (μ₃‐OH)₂Cu₄ cluster [Cu—O = 1.9525 (14)–2.0770 (15) Å and Cu...Cu = 3.0536 (5) Å] involving two independent copper ions in tetragonal pyramidal CuO₄N and trigonal bipyramidal CuO₃N₂ environments. One carboxylate group of the anion is bridging and the other two are monodentate, leading to the connection of three hydroxide clusters and the generation of neutral coordination layers separated by 9.3583 (5) Å. The interlayer linkage is effected by μ₃‐tr₂ad ligands, with one triazole group N¹:N²‐bridging and the second monodentate [Cu—N = 1.9893 (19), 2.010 (2) and 2.411 (2) Å]. In total, the hydroxide clusters are linked to six close neighbors within the carboxylate layer and to four neighbors via tr₂ad bridges. Hydrogen bonding of solvent water molecules to noncoordinated triazole N atoms and carboxylate groups provides two additional links for the net, which adopts a 12‐connected topology corresponding to hexagonal closest packing. The study also introduces a new type of bis(triazole) ligand, which may find wider applications for supramolecular synthesis.     

One‐dimensional CuII coordination polymers containing C2h‐symmetric 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate linkers

Two new one‐dimensional Cu^II coordination polymers (CPs) containing the C_2h‐symmetric terphenyl‐based dicarboxylate linker 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate (3,3′‐TPDC), namely catena‐poly[[bis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ⁴O,O′:O′′:O′′′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂]·H₂O}_n, (I), and catena‐poly[[aquabis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ²O³:O^3′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂(H₂O)]·H₂O}_n, (II), were both obtained from two different methods of preparation: one reaction was performed in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) as a potential pillar ligand and the other was carried out in the absence of the DABCO pillar. Both reactions afforded crystals of different colours, i.e. violet plates for (I) and blue needles for (II), both of which were analysed by X‐ray crystallography. The 3,3′‐TPDC bridging ligands coordinate the Cu^II ions in asymmetric chelating modes in (I) and in monodenate binding modes in (II), forming one‐dimensional chains in each case. Both coordination polymers contain two coordinated dimethylamine ligands in mutually trans positions, and there is an additional aqua ligand in (II). The solvent water molecules are involved in hydrogen bonds between the one‐dimensional coordination polymer chains, forming a two‐dimensional network in (I) and a three‐dimensional network in (II).     

Design,synthesis, and gas permeation properties of polyimides containing pendent imidazolium groups

Film‐forming polymers containing ionic groups have attracted considerable attention as emerging materials for gas separation applications. The aim of this article was to synthesize new film‐forming polyimides containing imidazolium groups (PI‐IMs) and establish their structure–performance relationship. In this context, a new aromatic diamine, namely, N¹‐(4‐aminophenyl)‐N¹‐(4‐(2‐phenyl‐1H‐imidazol‐1‐yl)phenyl)benzene‐1,4‐diamine (ImTPADA), was synthesized and polycondensed with three aromatic dianhydrides, namely, 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, 4,4‐(4,4‐isopropylidenediphenoxy) bis(phthalic anhydride), and 4,4′‐oxydiphthalic anhydride to form the corresponding polyimides containing pendent 2‐phenylimidazole groups (PI‐IEs). Next, PI‐IMs were prepared by N‐quaternization of pendent 2‐phenylimidazole groups present in PI‐6FDA using methyl iodide followed by anion exchange with bis(trifluoromethane)sulfonimide lithium salt (LiTf₂N). PI‐IEs and PI‐IMs exhibited reasonably high molecular weights, amorphous nature, good solubility, and could be cast into self‐standing films from their DMAc solutions. Thermogravimetric analysis showed that 10% weight loss temperature of PI‐IEs and PI‐IMs were in the range 545–475 °C and 303–306 °C, respectively. Gas permeability analysis of films of PI‐IEs and PI‐IMs was investigated by variable‐volume method and it was observed that incorporation of ionic groups into PI‐6FDA resulted in increased permeability while maintaining selectivity. In particular, polymer bearing Tf₂N⁻ anion exhibited high CO₂ permeability (33.3 Barr) and high selectivity for CO₂/CH₄ (41.1) and CO₂/N₂ (35.4). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1721–1729     

Dinuclear Complexes of Copper(I) with Crown Ether‐containing N‐Thiophosphorylated Bis‐thioureas and 2,2′‐Bipyridine or 1,10‐Phenanthroline: Synthesis,Characterization, and Picrate Extraction Properties

Reaction of O,O′‐diisopropylthiophosphoric acid isothiocyanate (iPrO)₂P(S)NCS with 1,10‐diaza‐18‐crown‐6, 1,7‐diaza‐18‐crown‐6, or 1,7‐diaza‐15‐crown‐5 leads to the N‐thiophosphorylated bis‐thioureas N,N′‐bis[C(S)NHP(S)(OiPr)₂]‐1,10‐diaza‐18‐crown‐6 ( H₂L^I ), N,N′‐bis[C(S)NHP(S)(OiPr)₂]‐1,7‐diaza‐18‐crown‐6 ( H₂L^II ) and N,N′‐bis[C(S)NHP(S)(OiPr)₂]‐1,7‐diaza‐15‐crown‐5 ( H₂L^III ). Reaction of the potassium salts of H₂L^I–III with a mixture of CuI and 2,2′‐bipyridine ( bpy ) or 1,10‐phenanthroline ( phen ) in aqueous EtOH/CH₂Cl₂ leads to the dinuclear complexes [Cu₂(bpy)₂L^I–III] and [Cu₂(phen)₂L^I–III] . The structures of these compounds were investigated by ¹H, ³¹P{¹H} NMR spectroscopy, and elemental analysis. The crystal structures of H₂L^I and [Cu₂(phen)₂L^I] were determined by single‐crystal X‐ray diffraction. Extraction capacities of the obtained compounds in comparison to the related compounds 1,10‐diaza‐18‐crown‐6, N,N′‐bis[C(=CMe₂)CH₂P(O)(OiPr)₂]‐1,10‐diaza‐18‐crown‐6, N,N′‐bis[C(S)NHP(O)(OiPr)₂]‐1,10‐diaza‐18‐crown‐6 towards the picrate salts LiPic, NaPic, KPic. and NH₄Pic were also studied.     

New organic–inorganic frameworks incorporating iso‐ and heteropolymolybdate units and a 3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium multiple hydrogen‐bond donor

Poly[bis(3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium) γ‐octamolybdate(VI) dihydrate], {(C₁₀H₁₆N₄)₂[Mo₈O₂₆]·2H₂O}_n, (I), and bis(3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium) α‐dodecamolybdo(VI)silicate tetrahydrate, (C₁₀H₁₆N₄)₂[SiMo₁₂O₄₀]·4H₂O, (II), display intense hydrogen bonding between the cationic pyrazolium species and the metal oxide anions. In (I), the asymmetric unit contains half a centrosymmetric γ‐type [Mo₈O₂₆]⁴⁻ anion, which produces a one‐dimensional polymeric chain by corner‐sharing, one cation and one water molecule. Three‐centre bonding with 3,3′,5,5′‐tetramethyl‐4,4′‐bi‐1H‐pyrazole‐2,2′‐diium, denoted [H₂Me₄bpz]²⁺ [N...O = 2.770 (4)–3.146 (4) Å], generates two‐dimensional layers that are further linked by hydrogen bonds involving water molecules [O...O = 2.902 (4) and 3.010 (4) Å]. In (II), each of the four independent [H₂Me₄bpz]²⁺ cations lies across a twofold axis. They link layers of [SiMo₁₂O₄₀]⁴⁻ anions into a three‐dimensional framework, and the preferred sites for pyrazolium/anion hydrogen bonding are the terminal oxide atoms [N...O = 2.866 (6)–2.999 (6) Å], while anion/aqua interactions occur preferentially viaμ₂‐O sites [O...O = 2.910 (6)–3.151 (6) Å].     

Conformational dynamics of bis(BF2)‐2,2′‐bidipyrrins revealed by through‐space 13C?19F and 19F?19F couplings

The conformation of [bis‐(N,N′‐difluoroboryl)]‐3,3′‐diethyl‐4,4′,8,8′,9,9′,10,10′‐octamethyl‐2,2′‐bidipyrrin (1) in solution was studied by analyzing the ¹³C? ¹⁹F and ¹⁹F? ¹⁹F through‐space spin–spin couplings. The ¹H and ¹³C NMR spectra were assigned on the basis of nuclear Overhauser effect spectroscopy (NOESY), heteronuclear single‐quantum correlation (HSQC), and heteronuclear multiple‐bond correlation (HMBC) experiments. The ¹⁹F spectrum of 1 was compared with that of 2‐ethyl‐1,3,5,6,7‐pentamethyl‐4,4‐difluoro‐4‐bor‐3a,4a‐diaza‐s‐indacen (2). The ¹⁹F? ¹⁹F through‐space spin? spin coupling in 1 was thus assigned and the coupling constant was obtained by simulating the coupling patterns. The obtained conformation of 1 was compared with those of the known complexes [bis‐(N,N′‐difluoroboryl)]‐3,3′,8,8′,9,9′‐hexaethyl‐4,4′,10,10′‐tetramethyl‐6,6′‐(4‐methylphenyl)‐2,2′‐bidipyrrin (3)and [bis‐(N,N′‐difluoroboryl)]‐9,9′‐diethyl‐4,4′,8,8′,10,10′‐hexamethyl‐3,3′‐bis(methoxycarbonylethyl)‐2,2′‐bidipyrrin (4). The conformational dynamics of 1, 3, and 4 was surveyed by observing the temperature dependence of the through‐space coupling constants between 253 and 333 K. The ¹³C? ¹⁹F and ¹⁹F? ¹⁹F through‐space spin–spin couplings thus confirm similar conformations of different BisBODIPYs in solution in contrast to earlier findings in the solid state. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis,crystal structures,photoluminescence, electrochemistry and DFT study of aluminium(III) and gallium(III) complexes containing a novel tetradentate Schiff base ligand

Single crystals of the aluminium and gallium complexes of 6,6′‐{(1E,1′E)‐[1,2‐phenylenebis(azanylylidene)]bis(methanylylidene)}bis(2‐methoxyphenol), namely diaqua(6,6′‐{(1E,1′E)‐[1,2‐phenylenebis(azanylylidene)]bis(methanylylidene)}bis(2‐methoxyphenolato)‐κ⁴O¹,N,N′,O^1′)aluminium(III) nitrate ethanol monosolvate, [Al(C₂₂H₁₈N₂O₄)(H₂O)₂]NO₃·C₂H₅OH, 1 , and diaqua(6,6′‐{(1E,1′E)‐[1,2‐phenylenebis(azanylylidene)]bis(methanylylidene)}bis(2‐methoxyphenolato)‐κ⁴O¹,N,N′,O^1′)gallium(III) nitrate ethanol monosolvate, [Ga(C₂₂H₁₈N₂O₄)(H₂O)₂]NO₃·C₂H₅OH, 2 , were obtained after successful synthesis in ethanol. Both complexes crystallized in the triclinic space group P, with two molecules in the asymmetric unit. In both structures, in one of the independent molecules the tetradentate ligand is almost planar while in the other independent molecule the ligand shows significant distortions from planarity, as illustrated by the largest distance from the plane constructed through the central metal atom and the O,N,N′,O′‐coordinating atoms of the ligand in 1 of 1.155 (3) Å and a distance of 1.1707 (3) Å in 2 . The possible reason for this is that there are various strong π‐interactions in the structures. This was confirmed by density functional theory (DFT) calculations, as were the other crystallographic data. DFT was also used to predict the outcome of cyclic voltammetry experiments. Ligand oxidation is more stabilized in the gallium complex. Solid‐state photoluminescence gave an 80 nm red‐shifted spectrum for the gallium complex, whereas the aluminium complex maintains the ligand curve with a smaller red shift of 40 nm.     

Cationic,water‐soluble,fluorene‐containing poly(arylene ethynylene)s: Effects of water solubility on aggregation,photoluminescence efficiency,and amplified fluorescence quenching in aqueous solutions

Three novel fluorene‐containing poly(arylene ethynylene)s with amino‐functionalized side groups were synthesized through the Sonogashira reaction. They were poly{9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene}‐alt‐co‐{2,5‐bis[3′‐(N,N‐diethylamino)‐1′‐oxapropyl]‐1,4‐phenylene} ( P1 ), poly{9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene} ( P2 ), and poly({9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene}‐alt‐co‐(1,4‐phenylene)) ( P3 ). Through the postquaternization treatment of P1 – P3 with methyl iodide, we obtained their cationic water‐soluble conjugated polyelectrolytes (WSCPs): P1′ – P3′ . The water solubility was gradually improved from P3′ to P1′ with increasing contents of hydrophilic side chains. After examining the ultraviolet–visible absorption and photoluminescence (PL) spectra, fluorescence lifetimes, and dynamic light scattering data, we propose that with the reduction of the water solubility from P1′ to P3′ , they exhibited a gradually increased degree of aggregation in H₂O. The PL quantum yields of P1′ – P3′ in H₂O displayed a decreasing tendency consistent with the increased degree of aggregation, suggesting that the pronounced degree of aggregation was an important reason for the low PL quantum yields of WSCPs in H₂O. Two structurally analogous water‐soluble trimers of P2′ and P3′ , model compounds 2,7‐bis(9″,9″‐bis{6‴‐[(N,N‐diethyl)‐N‐methylammonium] hexyl}‐2″‐fluorenylethynyl)‐9,9‐bis{6′‐[(N,N‐diethyl)‐N‐methylammonium]hexyl}fluorene hexaiodide and 1,4‐bis(9′,9′‐bis{6″‐[(N,N‐diethyl)‐N‐methylammonium]hexyl}‐2′‐fluorenylethynyl)benzene tetraiodide, were synthesized. The amplified fluorescence quenching of these WSCPs by Fe(CN)₆⁴⁻ in H₂O was studied by comparison with a corresponding analogous trimer. The effects of aggregation on the fluorescence quenching may be two‐edged in these cases. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5778–5794, 2006     

Azide‐based Cross‐Linking of Polymers of Intrinsic Microporosity (PIMs) for Condensable Gas Separation

Cross‐linked polymers of intrinsic microporosity (PIM)s for gas separation membranes, were prepared by a nitrene reaction from a representative PIM in the presence of two different diazide cross‐linkers. The reaction temperature was optimized using TGA. The homogenous membranes were cast from THF solutions of different ratios of PIM to azides. The resulting cross‐linked structures of the PIMs membranes were formed at 175 °C after 7.5 h and confirmed by TGA, XPS, FT‐IR spectroscopy and gel content analysis. These resulting cross‐linked polymeric membranes showed excellent gas separation performance and can be used for O₂/N₂ and CO₂/N₂ gas pairs, as well as for condensable gases, such as CO₂/CH₄, propylene/propane separation. Most importantly, and differently from typical gas separation membranes derived from glassy polymers, the crosslinked PIMs showed no obvious CO₂ plasticization up to 20 atm pressure of pure CO₂ and CO₂/CH₄ mixtures.

     

Synthesis of spiro[indoline‐3,3′‐pyrrolizines] by 1,3‐dipolar reactions between isatins,l‐proline and electron‐deficient alkenes

Two spiro[indoline‐3,3′‐pyrrolizine] derivatives have been synthesized in good yield with high regio‐ and stereospecificity using one‐pot reactions between readily available starting materials, namely l ‐proline, substituted 1H‐indole‐2,3‐diones and electron‐deficient alkenes. The products have been fully characterized by elemental analysis, IR and NMR spectroscopy, mass spectrometry and crystal structure analysis. In (1′RS ,2′RS ,3SR ,7a′SR )‐2′‐benzoyl‐1‐hexyl‐2‐oxo‐1′,2′,5′,6′,7′,7a′‐hexahydrospiro[indoline‐3,3′‐pyrrolizine]‐1′‐carboxylic acid, C₂₈H₃₂N₂O₄, (I), the unsubstituted pyrrole ring and the reduced spiro‐fused pyrrole ring adopt half‐chair and envelope conformations, respectively, while in (1′RS ,2′RS ,3SR ,7a′SR )‐1′,2′‐bis(4‐chlorobenzoyl)‐5,7‐dichloro‐2‐oxo‐1′,2′,5′,6′,7′,7a′‐hexahydrospiro[indoline‐3,3′‐pyrrolizine], which crystallizes as a partial dichloromethane solvate, C₂₈H₂₀Cl₄N₂O₃·0.981CH₂Cl₂, (II), where the solvent component is disordered over three sets of atomic sites, these two rings adopt envelope and half‐chair conformations, respectively. Molecules of (I) are linked by an O—H…·O hydrogen bond to form cyclic R ₆⁶(48) hexamers of (S ₆) symmetry, which are further linked by two C—H…O hydrogen bonds to form a three‐dimensional framework structure. In compound (II), inversion‐related pairs of N—H…O hydrogen bonds link the spiro[indoline‐3,3′‐pyrrolizine] molecules into simple R ₂²(8) dimers.     

Magnetic Ordering in Iron(II) Complexes due to a 2D Network of Hydrogen Bonds

The magnetic properties of two octahedral iron(II) complexes with Schiff base like equatorial N₂O₂ coordinating ligands and methanol (MeOH) as axial ligand are reported. Both compounds [FeL1(MeOH)₂] ( 1 ) and [FeL2(MeOH)₂] ( 2 ) (with L1 = [3,3′]‐[1,2‐phenylenebis(iminomethylidyne)‐bis(2,4‐pentanedionato)(2‐)‐N,N′,O²,O²′] and L2 = [E,E]‐[{diethyl 2,2′‐1,2‐phenylenebis(iminomethylidyne)bis(3‐oxo‐3‐phenylpropanato)} (2‐)‐N,N′,O3,O3′]) show a weak spontaneous magnetization below T_C = 10 K. Results from X‐ray structure analysis of 1 indicate, that this is due to 2D network of hydrogen bonds as previously discussed for a similar complex.     

Syntheses and properties of organosoluble polyimides based on 5,5′‐bis[4‐(4‐aminophenoxy)phenyl]‐4, 7‐methanohexahydroindan

A series of organosoluble aromatic polyimides (PIs) was synthesized from 5,5′‐bis[4‐(4‐aminophenoxy)phenyl]‐4,7‐methanohexahydroindan (3) and commercial available aromatic dianhydrides such as 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA), 4,4′‐oxydiphthalic anhydride (ODPA), 4,4′‐sulfonyl diphthalic anhydride (SDPA), or 2,2′‐bis(3,4‐dicarboxyphenyl) hexafluoropropanic dianhydride (6FDA). PIs (III_c–f), which were synthesized by direct polymerization in m‐cresol, had inherent viscosities of 0.83–1.05 dL/g. These polymers could easily be dissolved in N,N′‐dimethylacetamide (DMAc), N‐methyl‐2‐pyrrolidone (NMP), N,N‐dimethylformamide (DMF), pyridine, m‐cresol, and dichloromethane. Whereas copolymerization was proceeded with equivalent molar ratios of pyromellitic dianhydride (PMDA)/6FDA, 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA)/6FDA, or BTDA/SDPA, or ½ for PMDA/SDPA, copolyimides (co‐PIs), derived from 3 and mixed dianhydrides, were soluble in NMP. All the soluble PIs could form transparent, flexible, and tough films, and they showed amorphous characteristics. These films had tensile strengths of 88–111 MPa, elongations at break of 5–10% and initial moduli of 2.01–2.67 GPa. The glass transition temperatures of these polymers were in the range of 252–311°C. Except for III_e, the 10% weight loss temperatures (T_d) of PIs were above 500°C, and the amount of carbonized residues of the PIs at 800°C in nitrogen atmosphere were above 50%. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1681–1691, 1999