Computational Study of Hydrogen Bonding in Substituted Phenol‐Acetonitrile‐Water Clusters

The calculations for a water‐acetonitrile‐substituted phenols system and the comparison with the experimental parameters will be given. Here we study change in the nature of the interactions into the system with donor and acceptor electron substituents on the phenolic ring, the structures, relative energies and harmonic frequencies. The conformers showed a significant difference in the OH and CN band shift depending on the type of the hydrogen bond formed and the position of the substituent on the phenolic ring. The cyclical hydrogen bonds between water‐acetonitrile and substituted phenol OH are important evidence of the relative stability in the system under study.     

Experimental and Computational Study of the Thermal Decomposition of 3‐Methyl‐3‐buten‐1‐ol in m‐Xylene Solution

An experimental study of the thermal decomposition of a β‐hydroxy alkene, 3‐methyl‐3‐buten‐1‐ol, in m‐xylene solution, has been carried out at five different temperatures in the range of 513.15–563.15 K. The temperature dependence of the rate constants for the decomposition of this compound in the corresponding Arrhenius equation is given by ln k (s^?1) = (25.65 ± 1.52) ? (17,944 ± 814) (kJ·mol^?1)·T^?1. A computational study has been carried out at the M05–2X/6–31+G(d,p) level of theory to calculate the rate constants and the activation parameters by the classical transition state theory. There is a good agreement between the experimental and calculated rate constants and activation Gibbs energies. The bonding characteristics of reactant, transition state, and products have been investigated by the natural bond orbital analysis, which provides the natural atomic charges and the Wiberg bond indices. Based on the results obtained, the mechanism proposed is a one‐step process proceeding through a six‐membered cyclic transition state, being a concerted and slightly asynchronous process. The results have been compared with those obtained previously by us (Struct Chem 2013, 24, 1811–1816) for the thermal decomposition of 3‐buten‐1‐ol, in m‐xylene solution. We can conclude that in the compound studied in this work, 3‐methyl‐3‐buten‐1‐ol, the effect of substitution at position 3 by a weakly activating CH₃ group is the stabilization of the transition state formed in the reaction and therefore a small increase in the rate of thermal decomposition.     

Intercalation of Sulfanilic Acid‐Phenol‐Formaldehyde Polycondensate into Hydrocalumite Type Layered Double ­Hydroxide

Polycondensates containing sulfonate groups, referred to as concrete superplasticizers, are widely used in the construction industry. A sulfanilic acid–phenol–formaldehyde polycondensate (SPF) with M_w ≈ 100.000 g · mol^–1 was synthesized from sulfanilic acid, phenol and formaldehyde by polycondensation reaction, and its intercalation into hydrocalumite type Layered Double Hydroxide (LDH) was investigated. Preparation was done by rehydration of tricalcium aluminate, a cement constituent, in the presence of the polymer. According to the XRD pattern, SPF was successfully intercalated. A d value of approx. 2.6 nm was found. Elemental composition of the new organo‐mineral phase reveals charge balancing of the cationic LDH main layers by the polycondensate. Thermogravimetry indicates that thermal degradation of intercalated SPF occurs at higher temperature, compared to non‐intercalated SPF. According to SEM imaging, the novel Ca‐Al‐LDH phase exhibits the morphology of intergrown platelets. Ultra‐thin nanosheets (foils) with approx. 50 nm thickness were obtained. The layered structure and d value obtained from diffraction analysis were confirmed by TEM imaging. The new hydride can be used as cement and concrete additive.     

Organo‐Iodine(III)‐Catalyzed Oxidative Phenol–Arene and Phenol–Phenol Cross‐Coupling Reaction

The direct oxidative coupling reaction has been an attractive tool for environmentally benign chemistry. Reported herein is that the hypervalent iodine catalyzed oxidative metal‐free cross‐coupling reaction of phenols can be achieved using Oxone as a terminal oxidant in 1,1,1,3,3,3‐hexafluoropropan‐2‐ol (HFIP). This method features a high efficiency and regioselectivity, as well as functional‐group tolerance under very mild reaction conditions without using metal catalysts.     

Kinetic Study of Di‐Tert‐Butyl Peroxide: Thermal Decomposition and Product Reaction Pathways

The major reaction path for oxidation of di‐tert‐butyl peroxide (DTBP) is generally considered to occur via fission of the weak peroxide RO? OR bond at temperatures above 393 K. The initial stable intermediates in the thermal decomposition or combustion of DTBP are acetone and ethane, and the overall reaction is accompanied by an important heat release which when mixed with air (oxygen) may exceed the self‐ignition temperatures. A kinetic study on plausible DTBP reaction paths was initiated in this work, and a detailed study of the thermochemistry of new intermediates, transition state structures, and products is reported. The density functional theory (DFT; B3LYP/6‐311g(d,p)), which is practical for large compounds along with the composite ab initio G3MP2B3 and G3 calculations, (when possible), are used. Computational chemistry results from DFT and ab initio calculations are coupled with isodesmic reaction analysis which, as demonstrated in previous studies, results in good accuracy. Over 10 unimolecular decomposition pathways are identified and reported.     

氟碳铈矿热分解动力学研究

采用Harcourt-Esson方法对不同来源的氟碳铈矿晶体热分解动力学进行了系统研究，得到的反应机制方程用普适积分法进一步验证，结果显示微山矿热分解为一级反应，不同品位的冕宁、非洲、芒廷帕斯氟碳铈矿热分解反应都是按照三维扩散机制进行的。     

Computational Kinetic Study for the Unimolecular Decomposition of Cyclopentanone

Among various categories of potential biofuel molecules, ketones are of significant interest. Cyclopentanone is a cyclic ketone that can be produced from biomass, and its combustion is still unknown. Moreover, its cyclic configuration makes it an interesting feedstock for the further production of high‐density fuels such as bi(cyclopentane). This study reports the first computational kinetic investigation of the unimolecular decomposition pathways of cyclopentanone by using the compound G3B3 method. The rate constants were calculated using Rice–Ramsperger–Kassel–Marcus theory in the temperature range of 800–2000 K. The results presented here can be used in a future kinetic combustion mechanism.     

2-硝基丙烯热解反应的理论研究

利用MO-AM1方法研究了2-硝基丙烯热解的反应途径。结果表明, 2-硝基丙烯可能首先热解产生一个四元环状中间体。该中间体依照分步过程继续分解时, 存在两种可能的途径, 其中先断N—O键的反应过程比先断C—C键的过程从能量上更为有利。反应过程中电荷无明显转移, 具有双自由基反应特点。     

Thermochemistry and Kinetics of the Thermal Decomposition of 1‐Chlorohexane

A theoretical kinetic study of the thermal decomposition of 1‐chlorohexane in gas phase between 600 and 1000 K was performed. Transition‐state theory and unimolecular reaction rate theory were combined with molecular information provided by quantum chemical calculations. Particularly, the B3LYP, BMK, M05–2X, and M06–2X formulations of the density functional theory (DFT) and the high‐level ab initio methods G3B3 and G4 were employed. The possible reaction channels for the thermal decomposition of 1‐chlorohexane were investigated, and the reaction takes place through the elimination of HCl with the formation of 1‐hexene. The derived high‐pressure limit rate coefficients are k _∞(600–1000 K) = (8 ± 5) × 10¹³ exp[‐((56.7 ± 0.4) kcal mol⁻¹/RT )] s⁻¹. The pressure effect over the reaction was analyzed from the calculation of the low‐pressure limit rate coefficients and the falloff curves. In addition, the standard enthalpies of formation at 298 K of −46.9 ± 1.5 kcal mol⁻¹ for 1‐chlorohexane and 5.8 ± 1.5 kcal mol⁻¹ for C₆H₁₃ radical were derived from isodesmic and isogiric reactions at high levels of theory.     

Phenol‐Substituted Tetrapyrazinoporphyrazines: pH‐Dependent Fluorescence in Basic Media

Tetrapyrazinoporphyrazines (TPyzPzs) bearing one, two, four or eight 3,5‐di(tert‐butyl)‐4‐hydroxyphenol moieties were synthesized as zinc(II) complexes and metal‐free derivatives. The deprotonation of the phenol using tetrabutylammonium hydroxide induced the formation of a strong donor for intramolecular charge transfer that switched OFF the red fluorescence (λ_F～660 nm) of the parent zinc TPyzPzs. The changes were fully reversible for TPyzPzs with one to four phenolic moieties, and an irreversible modification was observed for TPyzPzs substituted with eight phenols. The sensors were anchored to lipophilic particles in water, and a pK_a approximately 12.5–12.7 was determined for the phenolic hydroxyl based on fluorescence changes in different buffers. In addition, a novel concept for fluorescence OFF‐ON‐OFF switching in metal‐free TPyzPzs bearing phenolic moieties upon addition of specific amounts of base was demonstrated.     

Pincer‐Type Heck Catalysts and Mechanisms Based on PdIV Intermediates: A Computational Study

Pincer‐type palladium complexes are among the most active Heck catalysts. Due to their exceptionally high thermal stability and the fact that they contain Pd^II centers, controversial Pd^II/Pd^IV cycles have been often proposed as potential catalytic mechanisms. However, pincer‐type Pd^IV intermediates have never been experimentally observed, and computational studies to support the proposed Pd^II/Pd^IV mechanisms with pincer‐type catalysts have never been carried out. In this computational study the feasibility of potential catalytic cycles involving Pd^IV intermediates was explored. Density functional calculations were performed on experimentally applied aminophosphine‐, phosphine‐, and phosphite‐based pincer‐type Heck catalysts with styrene and phenyl bromide as substrates and (E)‐stilbene as coupling product. The potential‐energy surfaces were calculated in dimethylformamide (DMF) as solvent and demonstrate that Pd^II/Pd^IV mechanisms are thermally accessible and thus a true alternative to formation of palladium nanoparticles. Initial reaction steps of the lowest energy path of the catalytic cycle of the Heck reaction include dissociation of the chloride ligands from the neutral pincer complexes [{2,6‐C₆H₃(XPR₂)₂}Pd(Cl)] [X=NH, R=piperidinyl ( 1 a ); X=O, R=piperidinyl ( 1 b ); X=O, R=iPr ( 1 c ); X=CH₂, R=iPr ( 1 d )] to yield cationic, three‐coordinate, T‐shaped 14e^? palladium intermediates of type [{2,6‐C₆H₃(XPR₂)₂}Pd]⁺ ( 2 ). An alternative reaction path to generate complexes of type 2 (relevant for electron‐poor pincer complexes) includes initial coordination of styrene to 1 to yield styrene adducts [{2,6‐C₆H₃(XPR₂)₂}Pd(Cl)(CH₂?CHPh)] ( 4 ) and consecutive dissociation of the chloride ligand to yield cationic square‐planar styrene complexes [{2,6‐C₆H₃(XPR₂)₂}Pd(CH₂?CHPh)]⁺ ( 6 ) and styrene. Cationic styrene adducts of type 6 were additionally found to be the resting states of the catalytic reaction. However, oxidative addition of phenyl bromide to 2 result in pentacoordinate Pd^IV complexes of type [{2,6‐C₆H₃(XPR₂)₂}Pd(Br)(C₆H₅)]⁺ ( 11 ), which subsequently coordinate styrene (in trans position relative to the phenyl unit of the pincer cores) to yield hexacoordinate phenyl styrene complexes [{2,6‐C₆H₃(XPR₂)₂}Pd(Br)(C₆H₅)(CH₂?CHPh)]⁺ ( 12 ). Migration of the phenyl ligand to the olefinic bond gives cationic, pentacoordinate phenylethenyl complexes [{2,6‐C₆H₃(XPR₂)₂}Pd(Br)(CHPhCH₂Ph)]⁺ ( 13 ). Subsequent β‐hydride elimination induces direct HBr liberation to yield cationic, square‐planar (E)‐stilbene complexes with general formula [{2,6‐C₆H₃(XPR₂)₂}Pd(CHPh?CHPh)]⁺ ( 14 ). Subsequent liberation of (E)‐stilbene closes the catalytic cycle.     

1,3-二羧甲基咪唑盐酸盐热分解过程研究

离子液体是继超临界流体之后的一类新的绿色溶剂,因其具有一系列独特的性质,作为溶剂和反应介质已广泛应用于有机合成、催化反应工程、电化学、分离分析等领域.随着研究和应用的逐渐深入,仅仅将离子液体作为溶剂和反应介质已不能满足要求,使离子液体带上某些官能团,从而赋予其特定的功能,是相关领域的一个研究热点.1,3-二取代咪唑盐是一类常用的离子液体,对其功能化具有重要意义.1,3-二羧甲基咪唑的制备简单,将它与不同的酸如盐酸、磷酸、硼酸等进行反应,可得到对称二羧甲基取代的咪唑盐.这类咪唑盐作为缩聚单体与二醇或二胺反应,可得到每个重复链节上都含有咪唑阳离子的新的功能性聚酯或聚酰胺;如果用其掺杂导电聚苯胺,因其挥发性低则有可能大大提高聚苯胺的导电寿命.     

Phenol‐Derived Carbon Sealant Inspired by a Coalification Process

Recently, emerging functions utilizing phenolic molecules, such as surface functionalizing agents or bioadhesives, have attracted significant interest. However, the most important role of phenolic compounds is to produce carbonized plant matter called “coal”, which is widely used as an energy source in nearly all countries. Coalification is a long‐term, high‐temperature process in which phenols are converted into conducting carbonized matter. This study focuses on mimicking coalification processes to create conducting sealants from non‐conducting phenolic compounds by heat treatment. We demonstrate that a phenolic adhesive, tri‐hydroxybenzene (known as pyrogallol), and polyethylenimine mixture initially acts as an adhesive sealant that can be converted to a conducting carbon sealing material. The conductivity of the phenolic sealant is about 850 Ω^?1 cm^?1, which is an approximately two‐fold enhancement of the performance of carbon matter. Applications of the biomimetic adhesives described herein include conducting defect sealants in carbon nanomaterials and conducting binders for metal/carbon or ceramic/carbon composites.     

3-取代甲撑肼基二硫代甲酸甲酯类化合物热裂解的研究

首次采用气质联用仪研究了3-取代甲撑肼基二硫代甲酸甲酯类化合物的热裂解反应, 发现其在气化室可热裂解产生芳香腈、甲硫醇和异硫氰酸. 考察了3-苯基甲撑肼基二硫代甲酸甲酯在不同温度时的热裂解效率, 发现温度对其热裂解具有重要的影响, 该化合物在230 ℃时就能基本完全裂解. 同时还考察了含有不同取代基的化合物在210 ℃下的热裂解情况, 结果表明含推电子基的化合物比吸电子基化合物在气化室中裂解得完全, 热稳定性更差, 并根据实验结果推测了热裂解反应的可能机理.     

钼酸铵热分解过程动力学研究

有关多相钥酸钦在加热过程中的热分解行为，我们已用热重、差热及高温X一射线衍射等测试方法进行了系统研究以．如物相！fi．rsro为例4．50％（质量分数，下同）（NH4kM070。。·4H。0＋44．85％（NH小M05017＋50．65％（（NH4）2M04013十几（NH4）2M04013）的用酸按混合物消记     

ortho‐Selective Phenol‐Coupling Reaction by Anodic Treatment on Boron‐Doped Diamond Electrode Using Fluorinated Alcohols

Enlarged scope by fluorinated mediators : Oxyl radicals are easily formed on boron‐doped diamond (BDD) electrodes and can be exploited for the ortho‐selective coupling to the corresponding biphenols (see scheme). At partial conversion, a clean transformation is achieved that can be applied to electron‐rich as well as fluorinated phenols.

     

基于TGA-FTIR联用技术的EVA热解研究

采用热重-傅里叶变换红外光谱联用技术研究了在N2气氛下乙烯-乙酸乙烯酯共聚物(EVA)的热稳定性及其分解失重情况；实验首先单独使用热重分析仪考察了EVA在不同升温速率下的失重情况；然后采用热-红联用技术对EVA失重过程中的逸出气体进行考察；由实验结果可以明显地看出，EVA的分解失重分为两个阶段，并且随着升温速率的增大EVA的起始失重温度有所增加；第一个失重阶段所放出的气体经傅里叶变换红外光谱扫描并与标准气相谱库中乙酸的标准红外谱图对照后确定为乙酸，第二个失重阶段是由于碳氢链段的分解而引起的；最后根据升温速率为5℃／min时EVA第一个失重阶段的失重率计算得出EVA样品中乙酸乙烯酯的含量为31．8%(ω)。