Nitride Spinel: An Ultraincompressible High‐Pressure Form of BeP2N4

Owing to its outstanding elastic properties, the nitride spinel γ‐Si₃N₄ is of considered interest for materials scientists and chemists. DFT calculations suggest that Si₃N₄‐analog beryllium phosphorus nitride BeP₂N₄ adopts the spinel structure at elevated pressures as well and shows outstanding elastic properties. Herein, we investigate phenakite‐type BeP₂N₄ by single‐crystal synchrotron X‐ray diffraction and report the phase transition into the spinel‐type phase at 47 GPa and 1800 K in a laser‐heated diamond anvil cell. The structure of spinel‐type BeP₂N₄ was refined from pressure‐dependent in situ synchrotron powder X‐ray diffraction measurements down to ambient pressure, which proves spinel‐type BeP₂N₄ a quenchable and metastable phase at ambient conditions. Its isothermal bulk modulus was determined to 325(8) GPa from equation of state, which indicates that spinel‐type BeP₂N₄ is an ultraincompressible material.     

Mechanical properties of the Ni filler metal layer in Si3N4 joints measured by nanoindentation

Nanoindentation experiments were done on Si₃N₄/Ni/Si₃N₄ specimens bonded at different temperatures. Tests were carried out in both the ceramic adherent and the metal filler. Results from nanoindentation experiments done across the interlayer verify that a solution of Si atoms in the Ni interlayer did not modify the mechanical properties of the metal (elastic modulus and hardness). The increase in bonding temperature produced an increase in hardness in the metal interlayer but did not affect its elastic modulus. This hardening of the Ni interlayer was related to the decrease in the shear strength of these joints. Copyright © 2004 John Wiley & Sons, Ltd.     

Magnetic Investigations and 151Eu Mössbauer Spectroscopy of MYbSi4N7 with M = Sr,Ba, Eu

The isotypic nitridosilicates MYb[Si₄N₇] (M = Sr, Ba, Eu) were obtained by the reaction of the respective metals with Si(NH)₂ in a radiofrequency furnace below 1600 °C. On the basis of powder diffraction data of MYb[Si₄N₇] Rietveld refinements of the lattice constants were performed; these confirmed the previously published single‐crystal data. The compounds contain a condensed network of corner‐sharing [N(SiN₃)₄] units. The central nitrogen thus exhibits ammonium character. Magnetic susceptibility measurements of MYb[Si₄N₇] (M = Sr, Ba, Eu) show paramagnetic behavior with experimental magnetic moments of 3.03(2), (Sr), 2.73(2) (Ba), and 9.17(2) (Eu) μ_B per formula unit. In EuYbSi₄N₇ the europium and ytterbium atoms are in stable divalent and trivalent states, respectively. According to the non‐magnetic character of the alkaline earth cations, ytterbium has to be in an intermediate valence state Yb^III‐x in the strontium and barium compound. Consequently, either a partial exchange N^3—/O^2— resulting in compositions MYb^III‐x[Si₄N_7—xO_x] or an introduction of anion defects according to MYb^III‐x[Si₄N_7—x/3□_x/3] has to be assumed. The phase width 0 ≤ x ≤ 0.4 was estimated according to the magnetic measurements. ¹⁵¹Eu Mössbauer spectra of EuYb[Si₄N₇] at 78 K show a single signal at an isomer shift of δ = —12.83(3) mm s^—1 subject to quadrupole splitting of ΔE_Q = 5.7(8) mm s^—1, compatible with purely divalent europium.     

Crystal structures and antibacterial properties of Cu(II) complexes containing an unsymmetrical N2O Schiff base ligand and bidentate N-donor heterocyclic co-ligands

Abstract

Three new Cu(II) Schiff base complexes with bidentate N-donor heterocyclic co-ligands, 2,2'-bipyridine (1), 1,10-phenanthroline (2), and 2,9-dimethyl-1,10-phenanthroline (3), were synthesized and characterized by FT-IR and UV-vis spectroscopy. Molecular structures of [C₂₀H₂₁CuN₄O](ClO₄) (1) and [C₂₄H₂₅CuN₄O](ClO₄) (3) were characterized by single-crystal X-ray crystallography. The Schiff base ligand is an N₂O-type ligand, which is the mono-condensed form of the reaction between 1,3-propanediamine and salicylaldehyde. The antibacterial activities of these complexes were investigated against one gram positive and four gram negative bacteria. Considerable antibacterial activity was obtained against both gram type bacteria. Complexes 2 and 3 with 1,10-phenanthroline and 2,9-dimethyl-1,10-phenanthroline, respectively, showed better antibacterial activity compared to 1 which has the 2,2'-bipyridine co-ligand.     

A spontaneous solid-state NO donor to fight antibiotic resistant bacteria

This study substantiates the chemical origin of a free-radical-driven antibacterial effect at the surface of biomedical silicon nitride (Si₃N₄) in comparison with the long-known effect of oxygen reduction by oxidized TiO₂ at the surface of biomedical titanium alloys. Similar to the antibacterial effect exerted by reactive oxygen species (ROS; i.e., superoxide anions, hydroxyl radicals, singlet oxygen, and hydrogen peroxide) from TiO₂, reactive nitrogen species (RNS), such as nitrous oxide (N₂O), nitric oxide (NO), and peroxynitrite (^?OONO) in Si₃N₄, severely affect bacterial metabolism and lead to their lysis. However, in vitro experiment with gram-positive Staphylococcus epidermidis (S. epidermidis, henceforth) revealed that ROS and RNS promoted different mechanisms of lysis. Fluorescence microscopy of NO radicals and in situ time-lapse Raman spectroscopy revealed different metabolic responses of living bacteria in contact with different substrates. After 48 h, the DNA of bacteria showed complete destruction on Si₃N₄, while carbohydrates of the peptidoglycan membrane induced bacterial degradation on Ti-alloy substrates. Different spectroscopic fingerprints for bacterial lysis documented the distinct effects of RNS and ROS. Spontaneously activated in aqueous environment, the RNS chemistry of Si₃N₄ proved much more effective in counteracting bacterial proliferation as compared to ROS formed on TiO₂, which requires external energy (photocatalytic activation) to enhance effectiveness. Independent of surface topography, the antibacterial effect observed on Si₃N₄ substrates is due to its unique kinetics ultimately producing NO and represents a new intriguing avenue to fight bacterial resistance to conventional antibiotics.     

Nitride Spinel: An Ultraincompressible High-Pressure Form of BeP2N4

Owing to its outstanding elastic properties, the nitride spinel γ-Si₃N₄ is of considered interest for materials scientists and chemists. DFT calculations suggest that Si₃N₄-analog beryllium phosphorus nitride BeP₂N₄ adopts the spinel structure at elevated pressures as well and shows outstanding elastic properties. Herein, we investigate phenakite-type BeP₂N₄ by single-crystal synchrotron X-ray diffraction and report the phase transition into the spinel-type phase at 47 GPa and 1800 K in a laser-heated diamond anvil cell. The structure of spinel-type BeP₂N₄ was refined from pressure-dependent in situ synchrotron powder X-ray diffraction measurements down to ambient pressure, which proves spinel-type BeP₂N₄ a quenchable and metastable phase at ambient conditions. Its isothermal bulk modulus was determined to 325(8) GPa from equation of state, which indicates that spinel-type BeP₂N₄ is an ultraincompressible material.     

Superlubricity behaviors of Si3N4/DLC Films under PAO oil with nano boron nitride additive lubrication

The tribological properties of Si₃N₄ ball sliding against diamond‐like carbon (DLC) films were investigated using a ball‐on‐disc tribometer under dry friction and oil lubrications, respectively. The influence of nano boron nitride particle as lubricant additive in poly‐α‐olefin (PAO) oil on the tribological properties of Si₃N₄/DLC films was evaluated. The microstructure of DLC films was measured by Raman spectroscopy and X‐ray photoelectron spectroscopy. The experimental results show coefficient of friction (COF) of Si₃N₄/DLC films was as low as 0.035 due to the formation of graphite‐like transfer films under dry friction condition. It also indicates that the tribological properties of Si₃N₄/DLC films were influenced significantly by the viscosity of oil and the content of nano boron nitride particle in PAO oil. COF increases with the viscosity of PAO oil increasing. Si₃N₄/DLC films exhibit the superlubricity behaviors (μ=0.001 and nonmeasurable wear) under PAO 6 oil with 1.0 wt% nano boron nitride particle lubrication, indicating that the improved boundary lubrication behaviors have indeed been responsible for the significantly reduced friction. Nano boron nitride additive is used as solid lubricant‐like nano scale ball bearing to the pointlike contact and a soft phase bond with the weak van der Waals interaction force on the contact surface to improve the lubrication behaviors of Si₃N₄/DLC films. The potential usefulness of nano boron nitride as lubricant additive in PAO oil for Si₃N₄/DLC films has been demonstrated under oil lubrication conditions. The present work will extend the wide application of nano particle additive and introduce a new approach to superlubricity under boundary lubrication in future technological areas. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of polyphenylquinoxaline copolymers via aromatic nucleophilic substitution reactions of an A‐B quinoxaline monomer

A self‐polymerizable quinoxaline monomer (A‐B) has been synthesized and polymerized via aromatic nucleophilic substitution reactions. An isomeric mixture of self‐polymerizable quinoxaline monomers—2‐(4‐hydroxyphenyl)‐3‐phenyl‐6‐fluoroquinoxaline and 3‐(4‐hydroxyphenyl)‐2‐phenyl‐6‐fluoroquinoxaline—was polymerized in N‐methyl‐2‐pyrrolidinone (NMP) to afford high molecular weight polyphenylquinoxaline (PPQ) with intrinsic viscosities up to 1.91 dL/g and a glass‐transition temperature (T_g) of 251 °C. A series of comonomers was polymerized with A‐B to form PPQ/polysulfone (PS), PPQ/polyetherether ketone (PEEK), and PPQ/polyethersulfone (PES) copolymers. The copolymers readily obtained high intrinsic viscosities when fluorine was displaced in NMP under reflux. However, single‐electron transfer (SET) side reactions, which limit molecular weight, played a more dominant role when chlorine was displaced instead of fluorine. SET side reactions were minimized in the synthesis of PPQ/PS copolymers through mild polymerization conditions in NMP for longer polymerization times. Thus, the T_g's of PES (T_g = 220 °C), PEEK (T_g = 145 °C), and PS (T_g = 195 °C) were raised through the incorporation of quinoxaline units into the polymer. Copolymers with high intrinsic viscosities resulted in all cases, except in the case of PPQ/PEEK copolymers when 4,4′‐dichlorobenzophenone was the comonomer. © 2001 John Wiley & Sons, Inc. J Polym Sci A Part A: Polym Chem 39: 2037–2042, 2001     

Kinetics of Silicon Nitride Formation on SiO2‐Derived Rice Husk Ash Using the Chemical Vapor Infiltration Method

Since silicon nitride coatings on silicon dioxide are attractive for the semiconductor and electronics industries, cognizance of their formation kinetics is crucial for optimization of production parameters. In this contribution, the deposition kinetics (rate constant and activation energy) of Si₃N₄ by the hybrid system chemical vapor infiltration route (HYSY‐CVI), starting from N₂:NH₃ and SiF₄ (produced by the decomposition of Na₂SiF₆) has been studied. The deposition rate equation for Si₃N₄ was established from several possible gas‐phase or surface reaction steps involved in the growth of Si₃N₄ coatings onto silica‐derived rice husk ash (RHA). Based on a judicious analysis of four different models, it was found that Freundlich's adsorption model satisfactorily represents the rate of Si₃N₄ deposition process onto RHA.     

CuCl2 heterogenized on metformine‐modified polystyrene resin as an antibacterial agent and recyclable nanocatalyst for Ullmann‐type C‐N coupling reactions

Merrifield Resin was functionalized with metformine and applied as a solid support to immobilize the CuCl₂. The Ps‐Met/CuCl₂ was characterized by several techniques including Fourier transform infrared (FTIR), field emission scanning electron microscopy (FESEM), energy‐dispersive X‐ray spectroscopy (EDX), wavelength‐dispersive X‐ray spectroscopy (WDX) and inductively coupled plasma (ICP). The Ps‐Met/CuCl₂ was used as an efficient recyclable solid nanocatalyst for N‐arylation of indole and aniline through coupling reactions of Ullmann‐type C‐N. The advantages of this method are easy workup, improved yields, and simple recovery via filtration. Ultimately, the Ps‐Met/CuCl₂ antibacterial property was examined against two bacteria (Staphylococcus aureus (Staph. aureus) and Escherichia coli (E. coli)) and indicated its antibacterial performance against gram negative (E. coli) bacteria and gram positive (Staph. aureus).     

Planarity of heteroaryldithiocarbazic acid derivatives showing tuberculostatic activity: structure–activity relationships

The search for new tuberculostatics is an important issue due to the increasing resistance of Mycobacterium tuberculosis to existing agents and the resulting spread of the pathogen. Heteroaryldithiocarbazic acid derivatives have shown potential tuberculostatic activity and investigations of the structural aspects of these compounds are thus of interest. Three new examples have been synthesized. The structure of methyl 2‐[amino(pyridin‐3‐yl)methylidene]hydrazinecarbodithioate, C₈H₁₀N₄S₂, at 293 K has monoclinic (P2₁/n) symmetry. It is of interest with respect to antibacterial properties. The structure displays N—H…N and N—H…S hydrogen bonding. The structure of N′‐(pyrrolidine‐1‐carbonothioyl)picolinohydrazonamide, C₁₁H₁₅N₅S, at 100 K has monoclinic (P2₁/n) symmetry and is also of interest with respect to antibacterial properties. The structure displays N—H…S hydrogen bonding. The structure of (Z)‐methyl 2‐[amino(pyridin‐2‐yl)methylidene]‐1‐methylhydrazinecarbodithioate, C₉H₁₃N₄S₂, has triclinic (P) symmetry. The structure displays N—H…S hydrogen bonding.     

ChemInform Abstract: Crystal Structures and Properties of Nitrogen Oxides under High Pressure.

First‐principles calculations (USPEX and CASTEP code) using plane‐wave pseudopotentials under the generalized gradient approximation functional of Perdew—Burke—Ernzerhof are performed to investigate the structural, electronic, and elastic properties of N₂O₄ and N₂O₅.     

Sm2Si3O3N4 und Ln2Si2,5Al0,5O3,5N3,5 (Ln = Ce,Pr, Nd,Sm, Gd) – neuer synthetischer Zugang zu N‐haltigen Melilith‐Phasen und deren Einkristall‐Röntgenstrukturanalyse

Sm₂Si₃O₃N₄ and Ln₂Si_2.5Al_0.5O_3.5N_3.5 (Ln = Ce, Pr, Nd, Sm, Gd) – A Novel Synthetic Approach for the Preparation of N‐containing Melilites and X‐Ray Single‐Crystal Structure Determination The high‐temperature synthesis of nitridosilicates using an especially developed rf furnace was now transferred to the preparation of single‐crystalline oxonitridosilicates and oxonitridoaluminosilicates (sialons). Sm₂Si₃O₃N₄ was obtained by the reaction of SrCO₃, Si(NH)₂, and the respective lanthanoides, for Ln₂Si_2.5Al_0.5O_3.5N_3.5 (Ln = Ce, Pr, Nd, Sm, Gd) additionally AlN was used. The compounds were obtained as coarsely crystalline products. Their crystal structures were refined on the basis of single‐crystal X‐ray diffraction data. Sm₂Si₃O₃N₄ (a = 768.89(4), c = 499.60(4) pm) and the isotypic sialons Ce₂Si_2.5Al_0.5O_3.5N_3.5 (a = 779.20(3), c = 506.94(4) pm), Pr₂Si_2.5Al_0.5O_3.5N_3.5 (a = 778.26(4), c = 508.56(5) pm), Nd₂Si_2.5Al_0.5O_3.5N_3.5 (a = 776.15(4), c = 506.7(3) pm), Sm₂Si_2.5Al_0.5O_3.5N_3.5 (a = 772.63(13), c = 502.80(9) pm), and Gd₂Si_2.5Al_0.5O_3.5N_3.5 (a = 774.15(5), c = 506.46(4) pm) are new representatives of the N‐containing melilite structure type (space group P 4 2₁m (no. 113), Z = 2). For the structure analysis specific models were applied, which have been developed by Werner et al. on the basis of powder diffraction data.     

Two new zinc(II) and mercury(II) complexes based on N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide): synthesis,crystal structures and antibacterial activities

Reaction of N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide), C₂₀H₁₈F₂N₄O₂, ( L^F ), with zinc chloride and mercury(II) chloride produced different types and shapes of neutral coordination complexes, namely, dichlorido[N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide)‐κ²N,O]zinc(II), [ZnCl₂(C₂₀H₁₈F₂N₄O₂)], ( 1 ), and dichlorido[N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide)‐κ⁴O,N,N′,O′]mercury(II), [HgCl₂(C₂₀H₁₈F₂N₄O₂)], ( 2 ). The organic ligand and its metal complexes are characterized using various techniques: IR, UV–Vis and nuclear magnetic resonance (NMR) spectroscopies, in addition to powder X‐ray diffraction (PXRD), single‐crystal X‐ray crystallography and microelemental analysis. Depending upon the data from these analyses and measurements, a typical tetrahedral geometry was confirmed for zinc complex ( 1 ), in which the Zn^II atom is located outside the bis(benzhydrazone) core. The Hg^II atom in ( 2 ) is found within the core and has a common octahedral structure. The in vitro antibacterial activities of the prepared compounds were evaluated against two different bacterial strains, i.e. gram positive Bacillus subtilis and gram negative Pseudomonas aeruginosa bacteria. The prepared compounds exhibited differentiated growth‐inhibitory activities against these two bacterial strains based on the difference in their lipophilic nature and structural features.     

Phenakite‐Type BeP2N4—A Possible Precursor for a New Hard Spinel‐Type Material

BeP₂N₄ was synthesized in a multi‐anvil apparatus starting from Be₃N₂ and P₃N₅ at 5 GPa and 1500 °C. The compound crystallizes in the phenakite structure type (space group R$\bar 3$ , no. 148) with a=1269.45(2) pm, c=834.86(2) pm, V=1165.13(4)×10⁶ pm³ and Z=18. As isostructural and isovalence‐electronic α‐Si₃N₄ transforms into β‐Si₃N₄ at high pressure and temperature, we studied the phase transition of BeP₂N₄ into the spinel structure type by using density functional theory calculations. The predicted transition pressure of 24 GPa is within the reach of today’s state of the art high‐pressure experimental setups. Calculations of inverse spinel‐type BeP₂N₄ revealed this polymorph to be always higher in enthalpy than either phenakite‐type or spinel‐type BeP₂N₄. The predicted bulk modulus of spinel‐type BeP₂N₄ is in the range of corundum and γ‐Si₃N₄ and about 40 GPa higher than that of phenakite‐type BeP₂N₄. This finding implies an increase in hardness in analogy to that occurring for the β‐ to γ‐Si₃N₄ transition. In hypothetical spinel‐type BeP₂N₄ the coordination number of phosphorus is increased from 4 to 6. So far only coordination numbers up to 5 have been experimentally realized (γ‐P₃N₅), though a sixfold coordination for P has been predicted for hypothetic δ‐P₃N₅. We believe, our findings provide a strong incentive for further high‐pressure experiments in the quest for novel hard materials with yet unprecedented structural motives.     

Theoretical Investigation of the Solid State Reaction of Silicon Nitride and Silicon Dioxide forming Silicon Oxynitride (Si2N2O) under Pressure

The high‐pressure behavior of Si₂N₂O is studied for pressures up to 100 GPa using density functional theory calculations. The investigation of a manifold of hypothetical polymorphs leads us to propose two dense phases of Si₂N₂O, succeeding the orthorhombic ambient‐pressure polymorph at higher pressures:a defect spinel structure at moderate pressures and a corundum‐type structure at very high pressures. Taking into account the formation of silicon oxynitride from silicon dioxide and silicon nitride and its pressure dependence, we propose five pressure regions of interest for Si₂N₂O within the pseudo‐binary phase diagram SiO₂‐Si₃N₄: (i) stability of the orthorhombic ternary phase of Si₂N₂O up to 6 GPa, (ii) a phase assemblage of coesite, stishovite, and β‐Si₃N₄ between 6 and 11 GPa, (iii) a possible defect spinel modification of Si₂N₂O between 11 and 16 GPa, (iv) a phase assemblage of stishovite and γ‐Si₃N₄ above 40 GPa, and (v) a possible ternary Si₂N₂O phase with corundum‐type structure beyond 80 GPa. The existence of both ternary high‐pressure phases of Si₂N₂O, however, depends on the delicate influence of configurational entropy to the free energy of the solid state reaction.     

Cationic poly(ester‐phosphoester)s: Facile synthesis and antibacterial properties

Biodegradable poly(ester‐phosphoester)s bearing multiple chloroethyl groups were synthesized facilely by the ring‐opening copolymerization of 2‐(2‐chloroethoxy)‐2‐oxo‐1,3,2‐dioxaphospholane (CEP) and ε‐caprolactone (CL) in the presence of lanthanum tris(2,6‐di‐tert‐butyl‐4‐methylphenolate)s (La(DBMP)₃) as single‐component catalyst under mild conditions. Then the quaternization reaction was carried out between the halide copolymers and a series of N,N‐dimethyl alkylamines to give poly(ester‐phosphoester)s containing ammonium groups with various charge density and alkyl chain length. The antibacterial properties of these cationic poly(esterphosphoester)s were evaluated by OD600 and zone of inhibition methods against gram‐negative (Escherichia coli) and gram‐positive (Staphylococcus aureus) bacteria. Cationic poly(esterphosphoester)s with long alkyl chain on the ammonium groups show excellent antibacterial activity for both gram‐negative and gram‐positive bacteria even with low charge density. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3667–3673     

2‐[(E)‐(4‐Hydroxy‐3‐methoxybenzylidene)amino]‐N‐(2‐methylphenyl)‐4,5,6,7‐tetrahydro‐1‐benzothiophene‐3‐carboxamide

The title compound, C₂₄H₂₄N₂O₃S, exhibits antifungal and antibacterial properties. The compound crystallizes with two molecules in the asymmetric unit, with one molecule exhibiting `orientational disorder' in the crystal structure with respect to the cyclohexene ring. The o‐toluidine groups in both molecules are noncoplanar with the respective cyclohexene‐fused thiophene ring. In both molecules, there is an intramolecular N—H...N hydrogen bond forming a pseudo‐six‐membered ring which locks the molecular conformation and eliminates conformational flexibility. The crystal structure is stabilized by O—H...O hydrogen bonds; both molecules in the asymmetric unit form independent chains, each such chain consisting of alternating `ordered' and `disordered' molecules in the crystal lattice.     

Preparation and properties of Ni–Co–P/nano‐sized Si3N4 electroless composite coatings

Ni–Co–P/nano‐sized Si₃N₄ composite coating was successfully fabricated on aluminum alloys by electroless plating in this work. The surface and cross‐sectional morphologies, composition, microstructure, microhardness, friction and wear behavior of deposits were investigated with SEM, EDS, XRD, Vickers hardness and high‐speed reciprocating friction, respectively. It was found that a Ni–Co–P/nano‐sized Si₃N₄ composite coating on aluminum alloy substrate is uniform and compact. The existence of nano‐sized Si₃N₄ particles in the Ni–Co–P alloy matrix causes a rougher surface with a granular appearance, and increases the microhardness but decreases the friction coefficients and wear rate of electroless coatings. Meanwhile, the effects of heat treatment at 200, 300, 400 and 500 °C for 1 h on the hardness and tribological properties were researched. It is revealed that both of the microhardness and tribological properties of Ni–Co–P coatings and Ni–Co–P/Si₃N₄ composite coatings increase with the increase of heating temperature in the range of 200–400 °C, but show different behavior for the two coatings after annealing at 500 °C. Copyright © 2011 John Wiley & Sons, Ltd.     

Ti,Cr, Al和B合金化元素对α-Nb5Si3力学性能和电子结构的影响

采用基于密度泛函理论(DFT)的第一性原理方法,通过比较形成能(E_form)、价电子浓度(VEC)、弹性常数(C_ij)、剪切模量(G)与体模量(B)的比值(G/B)以及派-纳力(τ_P-N)等参量的变化,研究了Ti、Cr、Al和B合金化对D8₁结构的α-Nb₅Si₃结构稳定性和力学性能的影响. 研究表明：合金化元素Ti、Cr、Al和B分别优先占据α-Nb₅Si₃中Nb^4c、Nb^4c、Si^4a和Si^8h位置;添加不同含量合金化元素的α-Nb₅Si₃仍保持稳定的D8₁结构;Ti、Al和B合金化使α-Nb₅Si₃的脆性增加,而随着Cr含量的增加,α-Nb₅Si₃的韧性逐渐增强. 此外,态密度(DOS)和Mulliken布居等电子结构的计算结果表明：Ti、Al和B合金化导致α-Nb₅Si₃脆性增加的主要原因是提高了共价键的强度;而Cr合金化的增韧作用主要来源于共价键数量的减少和强度的削弱,以及更多的反键态被占据.