Facile Fabrication of Solid‐state Electrochemiluminescence Sensor via Non‐covalent π‐π Stacking and Covalent Bonding on Graphite Electrode

Herein, a facile and efficient method was developed for fabrication of solid‐state electrochemiluminescence (ECL) sensor via non‐covalent π‐π stacking and covalent bonding on the graphite electrode (GE) surface. The electrode was firstly modified with 1‐aminopyrene via π‐π stacking between GE surface and the pyrene moiety. Thereafter a stable and efficient solid‐state ECL sensor was fabricated by covalent immobilization of ruthenium(II) onto the GE surface via amidation reaction between the 1‐aminopyrene and bis(2,2′‐bipyridyl)(4‐methyl‐4′‐carboxypropyl‐2,2′‐bipyridyl) ruthenium(II) bishexafluorophosphate. The sensor has been investigated using tripropylamine and tetracycline as representative analytes, and low detection limits of 0.7 nM and 3.5 nM (S/N=3) were reached, respectively.     

Tuning the π‐π stacking distance and J‐aggregation of DPP‐based conjugated polymer via introducing insulating polymer

The close π–π stacking and the high J‐aggregation during the formation of fibrillar morphology in films of the poly[[2,5‐bis(2‐octyldodecyl)?2,3,5,6‐tetrahydro‐3,6‐dioxopyrrolo[3,4‐c]pyrrole‐1,4‐diyl]‐alt–[[2,2′‐(2,5‐thiophene)bis‐thieno[3,2‐b]thiophen]‐5,5′‐diyl]] (PDPPTT‐T) are demonstrated via blending with polystyrene (PS). The hydrodynamic radius (R_h) of PDPPTT‐T is decreased from 16.7 nm in the neat solution to 12.7 nm in the blend solution at the ratio of 1/20(PDPPTT‐T/PS). This phenomenon suggests that blending PS is beneficial for the disentanglement of PDPPTT‐T. The disentanglement of PDPPTT‐T facilitates the formation of fibrillar morphology. The growth of the fibrils occurs along the molecular backbones and the width of the fibrils is parallel to the π–π stacking direction. The disentanglement of PDPPTT‐T helps the molecules adjust conformation to improve J‐aggregation and decrease the π–π stacking distance. The maximum absorption is red‐shifted from 825 nm to 849 nm and the relative intensity of J‐aggregation (the 0‐0/0‐1 ratio) is increased from 1.19 to 1.60. The π–π stacking distance decreases from 3.57 to 3.52 Å. The charge‐carrier mobility will be improved in the fibrillar morphology with close π–π stacking and high J‐aggregation. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 838–847     

The Influence of Oxygen Atoms on Conformation and π–π Stacking of Ladder‐Type Donor‐Based Polymers and Their Photovoltaic Properties

A novel ladder‐type donor pyran‐bridged indacenodithiophene (IDTP) is developed by introducing two oxygen atoms into indacenodithiophene unit. IDTP possesses a twisted backbone and leads to facially asymmetric arrangement of side chains, resulting in enhanced local π–π stacking of according polymer poly[(5,5,11,11‐tetrakis(4‐octylphenyl)‐5,11‐dihydrothieno[2′,3′:5,6]pyrano[3,4‐g]thieno[3,2‐c]isochromene)‐alt‐4,7‐(5‐fluoro‐2,1,3‐benzothiadiazole)] (PIDTP)‐FBT, which shows extended absorption range. Moreover, oxygen atoms render deeper highest occupied molecular orbital (HOMO) levels of poly[indacenodithiophene‐alt‐4,7‐(5‐fluoro‐2,1,3‐benzothiadiazole)] (PIDTP)‐FBT compared with PIDT‐FBT, therefore bringing a higher open‐circuit voltage (V _oc).     

Synthesis and Crystal Structure of a [Mo8O26]4– Cluster Derivative with 4‐MePyH+. First β‐Octamolybdate Derivative with π–π Stacking

Dioxobis(pyridine‐2‐thiolate‐N, S)molybdenum(VI) (MoO₂(Py‐S)₂), reacts with of 4‐methylpyridine (4‐MePy) in acetonitrile, by slow diffusion, to afford the title compound. This has been characterized by elemental analysis, IR and ¹H NMR spectroscopy. The X‐ray single crystal structure of the complex is described. Structural studies reveal that the molecular structure consists of a β‐Mo₈O₂₆ polyanion with eight MoO₆ distorted edge‐shared octahedra with short terminal Mo–O bonds (1.692–1.714 Å), bonds of intermediate length (1.887–1.999 Å) and long bonds (2.150–2.473 Å). Two different types of hydrogen bonds have been found: N–H···O (2.800–3.075 Å) and C–H···O (3.095–3.316 Å). The presence of π–π stacking interactions and strong hydrogen bonds are presumably responsible for the special disposition of the pyridinic rings around the polyanion cluster.     

Dissecting the concave–convex π‐π interaction in corannulene and sumanene dimers: SAPT(DFT) analysis and performance of DFT dispersion‐corrected methods

The characteristics of the concave–convex π‐π interactions are evaluated in 32 buckybowl dimers formed by corannulene, sumanene, and two substituted sumanenes (with S and CO groups), using symmetry‐adapted perturbation theory [SAPT(DFT)] and density functional theory (DFT). According to our results, the main stabilizing contribution is dispersion, followed by electrostatics. Regarding the ability of DFT methods to reproduce the results obtained with the most expensive and rigorous methods, TPSS‐D seems to be the best option overall, although its results slightly tend to underestimate the interaction energies and to overestimate the equilibrium distances. The other two tested DFT‐D methods, B97‐D2 and B3LYP‐D, supply rather reasonable results as well. M06‐2X, although it is a good option from a geometrical point of view, leads to too weak interactions, with differences with respect to the reference values amounting to about 4 kcal/mol (25% of the total interaction energy). © 2017 Wiley Periodicals, Inc.     

Energetic N‐Nitramino/N‐Oxyl‐Functionalized Pyrazoles with Versatile π–π Stacking: Structure–Property Relationships of High‐Performance Energetic Materials

N‐Nitramino/N‐oxyl functionalization strategies were employed to investigate structure–property relationships of energetic materials. Based on single‐crystal diffraction data, π–π stacking of pyrazole backbones can be tailored effectively by energetic functionalities, thereby resulting in diversified energetic compounds. Among them, hydroxylammonium 4‐amino‐3,5‐dinitro‐1H‐pyrazol‐1‐olate and dipotassium N,N′‐(3,5‐dinitro‐1H‐pyrazol‐1,4‐diyl)dinitramidate, with unique face‐to‐face π–π stacking, can be potentially used as a high‐performance explosive and an energetic oxidizer, respectively.     

π–π Stacking‐Interlinked Molecular Squares with Hepta‐Coordinated Cadmium(II) Corners, [Cd(DMAP)3(NO2)2]·0.5H2O

The single crystal X‐ray analysis data of the new hepta‐coordinate cadmium(II) complex of N,N‐dimethyl‐N‐(4‐pyridyl)amine (DMPA), [Cd(DMPA)₃(NO₂)₂]·0.5H₂O, shows that the coordination environment around the Cd^II is pentagonal bipyramidal. Furthermore, self‐assembly of this complex as molecular squares that interlink via π–π stacking interactions is observed. This network contains voids that are filled by water molecules.     

Preparation and chemical properties of soluble π‐conjugated poly(aryleneethynylene) consisting of azabenzothiadiazole as the electron‐accepting unit

A soluble charge‐transfer type poly(aryleneethynylene), PAE‐AzaBzTdz , consisting of a highly electron‐accepting azabenzothiadiazole unit was prepared in 99% yield by palladium‐catalyzed polycondensation between 4,7‐dibromo‐2,1,3‐azabenzothiadiazole ( Br₂‐AzaBzTdz ) and 1,4‐diethynyl‐2,5‐didodecyloxybenzene. PAE‐AzaBzTdz showed a number‐average molecular weight, M_n, of 6000 in gel‐permeation chromatography analysis and had good thermal stability as measured by TGA. UV–vis spectrum of PAE‐AzaBzTdz exhibited an absorption peak at 529 nm in chloroform, and the absorption peak shifted to a longer wavelength (601 nm) in film. Addition of MeOH to a CHCl₃ solution of PAE‐AzaBzTdz led to aggregation of the polymer to form stable colloidal particles. Results of filtration experiments using 0.2 and 0.02 μm membranes supported aggregation of the polymer. Addition of trifluoroacetic acid (TFA) to a chloroform solution of PAE‐AzaBzTdz led to a red‐shift of the UV–vis peak from 529 to 640 nm. An X‐ray diffraction pattern of powdery PAE‐AzaBzTdz indicated that the polymer assumed a layer‐to‐layer stacked structure with an interlayer distance of 3.4 Å in the solid state. An X‐ray diffraction pattern of cast film of PAE‐AzaBzTdz revealed that the polymer molecules in the cast film were ordered on the surface of Pt plate with the dodecyl side chain oriented toward the surface of the Pt plate. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2975–2982, 2008     

Phenylcarbamoylated β‐CD: π‐Acidic and π‐basic chiral selectors for HPLC

Two types of chiral stationary phases for HPLC based on π‐acidic or π‐basic perphenylcarbamoylated β‐CDs were synthesized. The relative structural features of the two effective chiral selectors are discussed and compared in both normal‐phase and RP modes. In addition, the nature and concentration of alcoholic modifiers were varied for optimal separation in normal phase and the structural variation of the analytes was also examined. The results showed that hydrogen bonding, steric effect and π‐acidic–π‐basic interaction contributed greatly to enantioseparation. Upon comparison, some of the differences in the separation behavior of the two types of chiral stationary phases might be due to the π‐acidic or π‐basic phenylcarbamate groups.     

Self‐Assembly and Disassembly of Vesicles as Controlled by Anion–π Interactions

Anion–π interactions have been widely studied as new noncovalent driving forces in supramolecular chemistry. However, self‐assembly induced by anion–π interactions is still largely unexplored. Herein we report the formation of supramolecular amphiphiles through anion–π interactions, and the subsequent formation of self‐assembled vesicles in water. With the π receptor 1 as the host and anionic amphiphiles, such as sodium dodecylsulfate (SDS), sodium laurate (SLA), and sodium methyl dodecylphosphonate (SDP), as guests, the sequential formation of host–guest supramolecular amphiphiles and self‐assembled vesicles was demonstrated by SEM, TEM, DLS, and XRD techniques. The intrinsic anion–π interactions between 1 and the anionic amphiphiles were confirmed by crystal diffraction, HRMS analysis, and DFT calculations. Furthermore, the controlled disassembly of the vesicles was promoted by competing anions, such as NO₃^?, Cl^?, and Br^?, or by changing the pH value of the medium.     

(E)‐3‐{4‐[(7‐Chloroquinolin‐4‐yl)oxy]‐3‐methoxyphenyl}‐1‐(4‐methylphenyl)prop‐2‐en‐1‐one: a ladder‐like structure resulting solely from π–π stacking interactions

In the title compound, C₂₆H₂₀ClNO₃, the quinoline fragment is nearly orthogonal to the adjacent aryl ring, while the rest of the molecular skeleton is close to being planar. The crystal structure contains no hydrogen bonds of any sort, but there are two π–π stacking interactions present. One, involving the quinoline ring, links molecules related by inversion, while the other, involving the two nonfused aryl rings, links molecules related by translation, so together forming a ladder‐type arrangement     

The Bright Future of Unconventional σ/π‐Hole Interactions

Non‐covalent interactions play a crucial role in (supramolecular) chemistry and much of biology. Supramolecular forces can indeed determine the structure and function of a host–guest system. Many sensors, for example, rely on reversible bonding with the analyte. Natural machineries also often have a significant non‐covalent component (e.g. protein folding, recognition) and rational interference in such ‘living’ devices can have pharmacological implications. For the rational design/tweaking of supramolecular systems it is helpful to know what supramolecular synthons are available and to understand the forces that make these synthons stick to one another. In this review we focus on σ‐hole and π‐hole interactions. A σ‐ or π‐hole can be seen as positive electrostatic potential on unpopulated σ* or π⁽*⁾ orbitals, which are thus capable of interacting with some electron dense region. A σ‐hole is typically located along the vector of a covalent bond such as X?H or X?Hlg (X=any atom, Hlg=halogen), which are respectively known as hydrogen and halogen bond donors. Only recently it has become clear that σ‐holes can also be found along a covalent bond with chalcogen (X?Ch), pnictogen (X?Pn) and tetrel (X?Tr) atoms. Interactions with these synthons are named chalcogen, pnigtogen and tetrel interactions. A π‐hole is typically located perpendicular to the molecular framework of diatomic π‐systems such as carbonyls, or conjugated π‐systems such as hexafluorobenzene. Anion–π and lone‐pair–π interactions are examples of named π‐hole interactions between conjugated π‐systems and anions or lone‐pair electrons respectively. While the above nomenclature indicates the distinct chemical identity of the supramolecular synthon acting as Lewis acid, it is worth stressing that the underlying physics is very similar. This implies that interactions that are now not so well‐established might turn out to be equally useful as conventional hydrogen and halogen bonds. In summary, we describe the physical nature of σ‐ and π‐hole interactions, present a selection of inquiries that utilise σ‐ and π‐holes, and give an overview of analyses of structural databases (CSD/PDB) that demonstrate how prevalent these interactions already are in solid‐state structures.     

Photophysical properties of σ–π‐conjugated alternating oligothienylene–oligosilylene polymers

UV‐visible absorption and fluorescence properties of three series of σ–π‐conjugated polymers (copolymers of alternative oligothienylene and oligosilylene units) have been studied in dioxane solution. The energies of the absorption maximum, fluorescence maximum, and the 0–0 transition are found to be linearly dependent on the reciprocal of the number of thiophene rings in the repeating unit of the polymer chain, but almost independent of the silicon atom number. The σ–π‐conjugation in the polymers results in red shift in the absorption and fluorescence maxima, higher fluorescence quantum yields, and longer fluorescence lifetimes of the polymers, with respect to their corresponding analogous α‐oligothiophenes. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1873–1880, 1999     

π‐stacking and C—X...D (X = H,NO2; D = O, π) interactions in the crystal network of both C—H...N and π‐stacked dimers of 1,2‐bis(4‐bromophenyl)‐1H‐benzimidazole and 2‐(4‐bromophenyl)‐1‐(4‐nitrophenyl)‐1H‐benzimidazole

Molecules of 1,2‐bis(4‐bromophenyl)‐1H‐benzimidazole, C₁₉H₁₂Br₂N₂, (I), and 2‐(4‐bromophenyl)‐1‐(4‐nitrophenyl)‐1H‐benzimidazole, C₁₉H₁₂BrN₃O₂, (II), are arranged in dimeric units through C—H...N and parallel‐displaced π‐stacking interactions favoured by the appropriate disposition of N‐ and C‐bonded phenyl rings with respect to the mean benzimidazole plane. The molecular packing of the dimers of (I) and (II) arises by the concurrence of a diverse set of weak intermolecular C—X...D (X = H, NO₂; D = O, π) interactions.     

A Zipper‐like Supramolecular Double‐Chain based on 1 D π‐π Stacking Interactions: Synthesis and Crystal Structure of [Cu(phen)(C4H4O4)(H2O)]2 · C4H6O4 (phen = 1,10‐phenanthroline)

[Cu(C₁₂H₈N₂)(C₄H₄O₄)(H₂O)]₂ · C₄H₆O₄ was prepared by the reaction of succinic acid, CuCl₂ · 2 H₂O, 1,10‐phenanthroline (phen = C₁₂H₈N₂), and Na₂CO₃ in a CH₃OH–H₂O solution. The crystal structure (triclinic, P 1 (no. 2), a = 7.493(1), b = 9.758(1), c = 13.517(1) Å; α = 68.89(1)°, β = 88.89(1)°, γ = 73.32(1)°, Z = 1, R = 0.0308, wR² = 0.0799 for 3530 observed reflections (F ≥ 2σ(F ) out of 3946 unique reflections) consists of hydrogen bonded succinic acid molecules and succinato bridged 1 D zipperlike supramolecular [Cu(phen)(C₄H₄O₄)_2/2(H₂O)]₂ double chains based on 1 D π‐π stacking interactions between the chelating phen systems at distances of 3.71 Å and 3.79 Å. The Cu atoms are fivefold trigonal bipyramidally coordinated by two N atoms of the bidentate chelating phen ligand and three O atoms of one water molecule and two bidentate bridging succinate ligands. The water O atom and one phen N atom are at the apical positions (equatorial: d(Cu–O) = 1.945, 2.254(2) Å, d(Cu–N) = 2.034(2) Å; axial: d(Cu–O) = 1.971(2) Å, d(Cu–N) = 1.995 Å).     

The peptide NCbz‐Val‐Tyr‐OMe and aromatic π–π interactions

The peptide N‐benzyloxycarbonyl‐L‐valyl‐L‐tyrosine methyl ester or NCbz‐Val‐Tyr‐OMe (where NCbz is N‐benzyloxycarbonyl and OMe indicates the methyl ester), C₂₃H₂₈N₂O₆, has an extended backbone conformation. The aromatic rings of the Tyr residue and the NCbz group are involved in various attractive intra‐ and intermolecular aromatic π–π interactions which stabilize the conformation and packing in the crystal structure, in addition to N—H...O and O—H...O hydrogen bonds. The aromatic π–π interactions include parallel‐displaced, perpendicular T‐shaped, perpendicular L‐shaped and inclined orientations.