Synthesis and characterization of nano Ag end capped L-cysteine bridged diblock copolymer

The target of the present investigation is synthesis and characterization of an amphiphilic diblock copolymer with antibacterial property. Ring opening polymerization (ROP) of ε-caprolactone (CL) and tetrahydrofuran (THF) was carried out under inert atmosphere by using L-cysteine as a bridging agent in the presence of stannous octoate (SO) as a catalyst. The nano silver end capped diblock copolymer was synthesized by in situ method. Thus obtained nano silver end capped L-cysteine bridged diblock copolymer was characterized by various analytical methods like Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, circular dichroism (CD), fluorescence spectroscopy, gel permeation chromatography (GPC), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM) and zeta potential. The antimicrobial property of the nano silver end capped diblock copolymer against e-coli was tested.     

Monte Carlo simulation of AB diblock copolymer between surface and substrate and comparison of experimental results

The morphologies of AB diblock copolymer film between the substrate and surface were investigated via Monte Carlo simulations on simple cubic lattices. The morphological dependence of the diblock copolymer thin film on the thickness, as well as the composition and interactive intensity has been mainly studied. With the increase of A‐segments fraction, various microdomain morphologies including regular parallel stripe‐like, mesh‐like, and normal lamella near the region of the surface were generated in this work. The morphology of thin films of asymmetric diblock copolymer was found to form cylinders in a bulk system when L_z was equal to 30. The morphologies of PS‐b‐PDMS diblock copolymer films have been studied via atomic force microscopy (AFM) and transition electron microscopy (TEM) measurements. The surface morphology of the PS‐b‐PDMS copolymer thin film shows a mesh‐like microphase separated structure, and PDMS continuous phase protruded on the PS dispersed phase. The surface composition of PS‐b‐PDMS copolymer thin films was measured by means of X‐ray photoelectron spectroscopy (XPS) and ATR‐IR. The comparison results show that the experimental observations are in good agreement with the simulation results. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1835–1845, 2006     

Synthesis and bulk characterization of new P(CB‐b‐S) diblock copolymers

Strongly asymmetric chlorinated polybutadiene‐b‐polystyrene, [P((CB)_x‐b‐(PS)_y)] diblock copolymers with increasing x/(x + y) ratios (up to 5.2 mol %) have been synthesized by the selective chlorination of the polybutadiene (PB) block in solution. Chlorination has been performed in anhydrous dichloromethane added with an antioxidant [2,2′‐methylenebis‐(6‐tert‐butyl‐4‐methyl‐phenol)], at −50°C, under a continuous Ar flow and in the dark. Under the optimized experimental conditions, the PB chlorination is not complete, but the PS block is left unmodified. Even in the presence of a large chlorine excess (Cl₂/butene unit molar ratio of 2.5), the experimental degree of chlorination of homo PB does not exceed 85%. The chlorinated copolymers have been characterized by ¹H‐NMR, IR spectroscopy, size‐exclusion chromatography, and elemental analysis. The chlorinated copolymers have also been studied by DSC and SAXS after annealing at 150°C. Although at this temperature the parent homopolymers are immiscible, no microphase separation has been observed for the block copolymers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 233–244, 1999     

Synthesis and chiral micellization behavior of optically active amphiphilic diblock copolymer bearing quinine pendants

A novel optically active amphiphilic diblock copolymer bearing quinine pendants poly(ethylene oxide)‐b‐poly(glycidyl triazolyl‐L ‐quinine) (MPEO‐b‐PGTQ) was synthesized by “click” reaction of alkyne‐modified diblock copolymer poly(ethylene oxide)‐b‐poly(glycidyl propargyl ether) (MPEO‐b‐PGPE) and 9‐N₃‐quinine. The structure and composition of copolymers were characterized by gel permeation chromatography, ¹H nuclear magnetic resonance spectroscopy (¹H NMR), elemental analysis and optical rotation measurements, which showed that the synthetic route could provide the copolymer with well‐defined composition and with similar optical activity compared to its parent quinine. The micellization behavior of this chiral copolymer was investigated in different solvent systems. The results from fluorescence spectroscopy, UV spectroscopy, dynamic light scattering, transmission electron microscopy, ¹H NMR and circular dichroism (CD) spectroscopy indicated that the MPEO‐b‐PGTQ could form regular chiral spherical micelles in H₂O and Tetrahydrofuran‐H₂O (10:90, V/V) systems, and the state of aggregated chiral micelles depended on the nature of the medium. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3640–3650, 2009     

Aggregation behavior of MPEG‐PCL diblock copolymers in aqueous solutions and morphologies of the aggregates

Poly(ethylene glycol)‐b‐polycaprolactone (MPEG‐PCL) diblock copolymers were synthesized via a ring‐opening polymerization of ε‐CL monomers with MPEG as an initiator. Their solubilities and apparent critical micelle concentrations (CMC) in aqueous solution were investigated as well as the determination of the micellar hydrodynamic diameter using dynamic light scattering (DLS). As PCL block length increased, the solubility and CMC decreased while diameters of micelles increased. The gel–sol transition behaviors were investigated using a vial tilting method. Aqueous solutions of copolymers undergo a gel to sol transition with increase in temperature when their polymer concentrations are above a critical gel concentration (CGC). The CGC of the copolymers and gel–sol transition temperature are influenced by the PCL chain length. The tapping mode AFM was performed by imaging the freeze‐dried deposits from the copolymer solutions on mica to investigate a process from free chains to micelles and to gel. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3406–3417, 2006     

PS-b-PNIPAM/Ag复合微粒的制备与表征

采用原子转移自由基聚合(ATRP)法合成了聚苯乙烯-b-聚(N-异丙基丙烯酰胺)(PS-b-PNIPAM)两亲性嵌段共聚物, 并以其为模板, 聚乙烯亚胺(PEI)作为银离子和嵌段共聚物PS-b-PNIPAM的交联剂以及还原剂, 制备了PS-b-PNIPAM/Ag复合纳米微粒. 利用透射电子显微镜(TEM)、X射线衍射(XRD)和傅里叶变换红外(FTIR)光谱对复合纳米微粒的形貌及其成分进行了表征. X射线衍射和电子衍射证明银纳米微粒具有良好的面心立方体单晶结构. 研究结果表明, 不同浓度的两亲性嵌段共聚物PS-b-PNIPAM在丙酮中形成的胶束模板对银纳米粒子的尺寸及其分布有重要的影响.     

Phase behavior of the polybutadiene–polystyrene diblock copolymer with the addition of the nonselective solvent dichlorobenzene in temperature and pressure fields

Thermal composition fluctuations were measured in a polybutadiene–polystyrene diblock copolymer with small-angle neutron scattering as a function of the temperature, pressure, and solvent content. The solvent was dichlorobenzene. In particular, we determined the phase diagram, the Flory–Huggins parameter, and the Ginzburg parameter. The two latter parameters were determined in terms of a theory by Fredrickson and Helfand from the susceptibility at an elevated temperature in the disordered regime. These parameters showed an overall linear decrease with pressure and a minimum at a 10% solvent content. The ordering temperature could be sufficiently well described by the theory of concentrated solutions. These results were consistent with corresponding experiments on a polybutadiene–polystyrene blend, for which the compensation of the free volume was observed by the solvent molecules. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3179–3190, 2004     

Facile synthesis and responsive behavior of PDMS‐b‐PEG diblock copolymer brushes via photoinitiated “thiol‐ene” click reaction

We present herein a mild and rapid method to create diblock copolymer brushes on a silicon surface via photoinitiated “thiol‐ene” click reaction. The silicon surface was modified with 3‐mercaptopropyltrimethoxysilane (MPTMS) self‐assembled monolayer. Then, a mixture of divinyl‐terminated polydimethylsiloxane (PDMS) and photoinitiator was spin‐coated on the MPTMS surface and exposed to UV‐light. Thereafter, a mixture of thiol‐terminated polyethylene glycol (PEG) and photoinitiator were spin‐coated on the vinyl‐terminated PDMS‐treated surface, and the sequent photopolymerization was carried out under UV‐irradiation. The MPTMS, PDMS, and PEG layers were carefully identified by X‐ray photoelectron spectroscopy, atomic force microscopy, ellipsometry, and water contact angle measurements. The thickness of the polydimethylsiloxane‐block‐poly(ethylene glycol) (PDMS‐b‐PEG) diblock copolymer brush could be controlled by the irradiation time. The responsive behavior of diblock copolymer brushes treated in different solvents was also discussed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Chain diffusion in the melt of an asymmetric diblock copolymer in the disordered and ordered state

 The self-diffusion in a polystyrene-b-polyisoprene diblock copolymer with a strongly asymmetric composition was investigated with dependence on temperature by pulsed field gradient (PFG) NMR. The diblock shows with decreasing temperature a disorder-to-order-transition at T _ODT=393 K from a micellar liquid-like to a bcc ordered state which was recently measured by SAXS [M. Schwab and B. Stühn, Phys. Rev. Lett. (1996) 76: 924]. Two diffusivities were observed, one of the free diblock chains and one of the diblock chains fixed in micelles. The volume fraction of free chains decreases with decreasing temperature. The diffusivity of the free chains must be related to chain stretching. The experiments show that within the time of the NMR experiment (300 ms) there is no exchange between the diblock chains in the free state and those fixed in the core of the micelles. Received: 25 March 1997 Accepted: 25 April 1997     

Reactively and physically compatibilized immiscible polymer blends: stability of the copolymer at the interface

This paper reports on the interfacial behaviour of block and graft copolymers used as compatibilizers in immiscible polymer blends. A limited residence time of the copolymer at the interface has been shown in both reactive blending and blend compatibilization by preformed copolymers. Polystyrene (PS)/polyamide6 (PA6), polyphenylene oxide (PPO)/PA6 and polymethylmethacrylate (PMMA)/PA6 blends have been reactively compatibilized by a styrene-maleic anhydride copolymer SMA. The extent of miscibility of SMA with PS, PPO and PMMA is a key criterion for the stability of the graft copolymer at the interface. For the first 10 to 15 minutes of mixing, the in situ formed copolymer is able to decrease the particle size of the dispersed phase and to prevent it from coalescencing. However, upon increasing mixing time, the copolymer leaves the interface which results in phase coalescence. In PS/LDPE blends compatibilized by preformed PS/hydrogenated polybutadiene (hPB) block copolymers, a tapered diblock stabilizes efficiently a co-continuous two-phase morphology, in contrast to a triblock copolymer that was unable to prevent phase coarsening during annealing at 180°C for 150 minutes.     

多尺度结构Ag/PA6纳米纤维膜的制备及其催化性能

随着工业的进步,废水处理特别是印染废水的处理成为亟待解决的问题.银纳米粒子因其特殊的物理化学性能而表现出催化活性,但银纳米粒子的团聚限制了其使用,所以出现了一系列新的载体材料,如微球、薄膜和纤维等.其中电纺纳米纤维由于具有高比表面积,作为载体材料具有非常大的优势,而将常规电纺纳米纤维作为载体也已有报道.但是,将具有更高比表面积的电纺纳米纤维作为载体,特别是一种类似于树枝状结构的多尺度纳米纤维作为载体还鲜有报道.本文制备了一种多尺度结构的PA6纳米纤维膜,该纳米纤维膜由直径为50?120 nm的主纤维和10?50 nm的分支纤维构成;由于分支纤维的出现,多尺度结构纳米纤维膜的比表面积得到了提高,可以为银纳米粒子的负载提供更多附着位点.制备的多尺度结构纳米纤维膜通过银胶溶液浸渍成功地负载银纳米粒子,对制备的纳米纤维膜的形态、化学结构以及对亚甲基蓝的催化性能进行了探讨.SEM,EDS和TEM结果表明,银纳米粒子成功地负载在多尺度结构纳米纤维的表面,并且银纳米粒子的粒径以及负载量可以通过变换银胶溶液的浓度合理调控.此外,与常规PA6纳米纤维膜相比,多尺度结构纳米纤维膜更有利于银纳米粒子的分散,同样通过银胶溶液A浸渍,负载在多尺度结构纳米纤维上银纳米粒子粒径为8.6 nm,而负载在普通PA6纳米纤维上银纳米粒子粒径为11.2 nm.XPS分析表明,银纳米粒子成功地负载到多尺度结构纳米纤维上,并且经不同银胶溶液处理,纳米纤维膜的载银量不同.通过O的高能XPS分析发现,银纳米粒子与PA6分子间形成了配位键,这在一定程度上有利于Ag纳米粒子的固定,阻止了Ag纳米粒子的团聚.Ag/PA6纳米纤维膜以及多尺度结构Ag/PA6纳米纤维膜催化降解实验表明,多尺度结构Ag/PA6纳米纤维膜具有较高的催化活性,反应2 h后对10 mg/L亚甲基蓝的降解率达到98.13%,并且降解过程符合伪一级动力学.不同浸渍液浓度处理纳米纤维膜催化实验表明,Ag纳米粒子的大小以及含量都会影响纳米纤维的催化活性,纳米粒子粒径越小,其催化活性越高;不同NaBH4加入量催化体系催化实验表明,随着NaBH4加入量的增大,催化体系的降解率增高,其对催化体系的催化性能起着至关重要的作用;其他条件一定,随着染料初始浓度的增大,催化体系的催化性能下降;循环实验表明,经5次循环之后,其降解率仍高达83.5%,该纳米纤维膜具有一定的循环使用性能.     

氯化胆碱离子液体中纳米银的电化学制备与表征

在氯化胆碱离子液体中,采用牺牲阳极法直接从金属银制备了纳米银微粒;利用X射线衍射仪、透射电子显微镜、傅立叶红外光谱和热分析仪对样品进行了分析表征.结果表明:所制备的银纳米微粒大致呈球形,具有面心立方结构,粒径约为60nm.作为溶剂的离子液体同时具有分散剂和稳定剂的功能,可防止银纳米微粒之间的团聚及表面氧化.     

Effect of styrene-4-vinyl pyridine diblock copolymer on morphological,thermal, and mechanical properties of poly(2,6-dimethyl-1,4-phenylene ether)/polyethylene ionomer blends

The compatibilizing effects of a styrene-4-vinyl pyridine diblock copolymer on the properties of immiscible poly(2,6-dimethyl-1,4-phenylene ether) (PPE)/polyethylene ionomer (Surlyn) blends are investigated by examining the phase morphology and the thermal and mechanical properties. The block copolymer is synthesized by sequential anionic polymerization at ?78°C and melt-mixed with PPE and Surlyn at 290°C. When a small amount of block copolymer is present, the domain size of the dispersed phase becomes smaller. The tensile strength and elongation at break increase with addition of the block copolymer for PPE-rich matrix blends, whereas the tensile strength increases but the elongation at break decreases for Surlyn-rich matrix blends. These effects are interpreted in terms of the interfacial activity and the reinforcing effect of the block copolymer. From the experimental results, it is concluded that the block copolymer plays a role as an effective compatibilizer for PPE/Surlyn blends. © 1994 John Wiley & Sons, Inc.     

双Schiff碱过渡金属配合物的合成及对环己烯催化氧化性能的研究

Schiff碱及其配合物在治疗肿瘤、抗菌、仿生载氧等方面具有优异的性能,在催化领域中也表现出多种性质。本文合成了三种结构简单的Schiff碱配体以及它们的过渡金属配合物,并研究了其对环己烯的催化环氧化性能。配体的结构如下。     

新型层柱化合物合成、表征及催化活性

将含过氧铌一、三取代钨硅、钨磷过氧杂多阴离子利用离子交换法嵌入Zn2Al类水滑石中制得层柱化合物,利用XRD,IR,UV等方法对产物的结构进行了表征。结果表明在层柱化合物中过氧杂多阴离子仍然保持Keggin结构,并且过氧键没被破坏。层柱化合物在酯化反应中显示优良的催化性能。     

Synthesis and characterization of linear ABC triblock copolymer of ethylene oxide,methyl methacrylate,and styrene

A well‐defined linear ABC triblock copolymer of ethylene oxide (EO), methyl methacrylate (MMA), and styrene (St) was prepared by sequential living anionic and photo‐induced charge transfer polymerization (CTP) using p‐aminophenol as parent compound. In the first step, the diblock copolymer of PEO‐b‐PMMA with a protected aniline end group at PEO end was prepared by initiating of phenoxo‐anion the polymerization of EO and MMA successively, then the diblock copolymer of PEO‐b‐PMMA via deprotection of aniline at PEO end constituted a binary initiation system with benzophenone (BP) by charge transfer complex mechanism to initiate the polymerization of St under UV‐irradiation. The GPC and NMR measurements support that in copolymerization, either in the first or second step, neither homopolymer nor side reactions, such as chain transfer or chain termination, was found. The effect of the concentration of PEO_a‐b‐PMMA and St, and the polarity of solvent on the polymerization rate (R_p) of CTP is discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 825–833, 1999     

十一钨锆杂多配合物位置异构体的合成表征及催化性能

过渡元素取代的杂多配合物由于其独特的催化活性和抗病毒性受到人们的重视 ,由于缺位 β位的介稳定性和异构化 ,给合成带来了一定的困难。我们发现 ,某些单取代金属衍生物中 β异构体具有良好的催化活性[1 ,2 ] 。本文报道了通式为α ,βi K6[SiW1 1 ZrO40 ]·XH2 O( βi=β1 ,β2 ,β3)的四种异构体 (简记作α ,β SiW1 1 Zr)的合成、表征及四种异构体对烯烃环氧化反应的催化活性 ,为研究Zr杂多化合物的应用提供选择。1　实验部分1 1　仪器与试剂日本岛津IR 40 8红外光谱仪 (KBr压片 ) ,美国PE公司产λ 35型紫外分光光谱仪 ;384B…     

Structure and morphology controllable synthesis of Ag/carbon hybrid with ionic liquid as soft-template and their catalytic properties

Ag/carbon hybrids were fabricated by the redox of glucose and silver nitrate (AgNO₃) in the presence of imidazolium ionic liquid ([C₁₄mim]BF₄) under hydrothermal condition. Monodisperse carbon hollow sub-microspheres encapsulating Ag nanoparticles and Ag/carbon cables were selectively prepared by varying the concentration of ionic liquid. Other reaction parameters, such as reaction temperature, reaction time and the mole ratio of silver nitrate to glucose, play important roles in controlling the structures of the products. The products were characterized by XRD, TEM (HRTEM), SEM, energy-dispersive X-ray spectroscopy (EDX), FTIR spectroscopy and a Raman spectrometer. The possible formation mechanism was proposed. The catalytic property of the hybrid in the oxidation of 1-butanol by H₂O₂ was also investigated.     

Cytotoxic performance of green synthesized Ag and Mg dual doped ZnO NPs using Salvadora persica extract against MDA-MB-231 and MCF-10 cells

In this study, dual doped Zinc oxide nanoparticles consisted of silver and magnesium were prepared by Salvadora persica extract. Powder X-ray diffraction (PXRD) analysis displayed the formation of wurtzite ZnO phase nanostructures and dual doped nanoparticles. The morphological observations of scanning electron microscopy (SEM) confirmed the hexagonal morphology of prepared nanoparticles. The Raman scattering of this product exhibited the first and second orders of polar and non-polar modes that are the characteristic bonds of a wurtzite structure. The toxicity effects of synthesized un-doped, as well as Ag and Mg dual doped ZnO NPs on breast cancer cell (MDA-MB-231) and breast normal cell (MCF-10A) lines, were investigated by the means of MTT test. Accordingly, in comparison to the case of silver and magnesium doped zinc oxide nanoparticles, the un-doped ZnO NPs caused a more toxic impact on MDA-MB-231cells. There was a lack of any significant toxicity effects from un-doped and Ag and Mg dual doped ZnO nanoparticles on the experimented normal cell line (MCF-10A). The gathered results were indicative of a lower toxicity effect in doped nanoparticles when compared to un-doped nanoparticles and therefore, it can be stated that the doping of silver and magnesium metals produces more reliable zinc oxide nanoparticles.     

BY分子筛的合成、表征及其裂化性能考察

采用水热晶化法合成了含杂原子硼的Y型分子筛,利用MAS NMR、XRD、IR等表征方法,证明了硼进入Y型分子筛的骨架中。利用吡啶吸附红外光谱、轻油微反装置分别测定了Y和BY分子筛的表面酸性及其裂化性能。结果表明,硼的引入增加了Y分子筛的B酸中心数目以及裂化和氢转移反应活性,导致裂化汽油中的烯烃明显降低,芳烃随之增加。