Modified cyanate ester resins with lower dielectric loss,improved thermal stability,and flame retardancy

Novel modified cyanate ester (CE) resins with decreased dielectric loss, improved thermal stability, and flame retardancy were developed by copolymerizing CE with hyperbranched phenyl polysiloxane (HBPPSi). HBPPSi was synthesized through the hydrolysis of phenyltrimethoxysilane, and its structure was characterized by ¹H‐NMR, ²⁹Si‐NMR, and Fourier transform infrared spectra. The effect of the incorporation of HBPPSi into CE resin on the curing behavior, chemical structure of cured networks, and typical performance of HBPPSi/CE resins were systemically evaluated. It is found that the incorporation of HBPPSi into CE network obviously not only catalyzes the curing of CE, but also changes the chemical structure of resultant networks, and thus results in significantly decreased dielectric loss, improved thermal stability, and flame retardancy as well as water absorption resistance. For example, in the case of the modified CE resin with 10 wt% HBPPSi, its limited oxygen index is about 36.0, about 1.3 times of that of neat CE resin, its char yield at 800°C increases from 31.6 to 35.4 wt%; in addition, its dielectric loss is only about 61% of that of neat CE resin at 1 kHz. All these changes of properties are discussed from the view of the structure–property relationship. The significantly improved integrated properties of CE resin provide a great potential to be used as structural and functional materials for many cutting‐edges fields. Copyright © 2011 John Wiley & Sons, Ltd.     

Dielectric properties of self‐catalytic interpenetrating polymer network based on modified bismaleimide and cyanate ester resins

Bismaleimide (BMI) resins with good thermal stability, fire resistance, low water absorption, and good retention of mechanical properties at elevated temperatures, especially in hot/wet environments, have attracted more attention in the electronic and aerospace industries. However, their relatively high dielectric constant limits their application in the aforementioned fields. In this work, a new promising approach is presented that consists of the formation of a self‐catalytic thermoset/thermoset interpenetrating polymer network. Interpenetrating polymer networks (IPNs) based on modified BMI resin (BMI/DBA) and cyanate ester (b10) were synthesized via prepolymerization followed by thermal curing. The self‐catalytic curing mechanism of BMI/DBA‐CE IPN resin systems was examined by differential scanning calorimetry. The dielectric properties of the cured BMI/DBA‐CE IPN resin systems were evaluated by a dielectric analyzer and shown in dielectric properties‐temperature‐log frequency three‐dimensional plots. The effect of temperature and frequency on the dielectric constant of the cured BMI/DBA‐CE IPN resin systems is discussed. The composition effect on the dielectric constant of the cured IPN resin systems was analyzed on the basis of Maxwell's equation and rule of mixture. The obtained BMI/DBA‐CE IPN resin systems have the combined advantages of low dielectric constant and loss, high‐temperature resistance, and good processability, which have many applications in the microelectronic and aerospace industries. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1123–1134, 2003     

Synergetic effect of thermal conductivity and flame retardancy of cyanate ester composites containing DOPO and BN with great dielectric properties

DOPO and boron nitride (BN) fillers with different particle sizes and several loadings were employed to improve the properties of cyanate ester (CE) resin. The effects of BN content and particle size on the thermal conductivity of the BN‐DOPO/CE ternary composites were discussed. The influence of enhancing the thermal conductivity of the ternary composites on their flame retardancy was studied. The consequences showed that increasing the thermal conductivity of BN‐DOPO/CE composites had an active impact on their flame retardancy. Approving flame retardancy of the ternary composites was certified by the high limiting oxygen index (LOI), UL‐94 rating of V‐0, and low heat release rate (HRR) and total heat release (THR). For instance, in contrast with pure CE matrix, peak of HRR (pk‐HRR), average of HRR (av‐HRR), THR, and average of effective heat of combustion (av‐EHC) of CEP/BN_{0.5 μm}/10 composite were decreased by 51.7%, 33.8%, 18.7%, and 18.9%, respectively. Thermal gravimetry analysis (TGA) showed that the addition of BN fillers improves the thermal stability of the composites. Moreover, the ternary composites possess good dielectric properties. Their dielectric constants (ε) are less than 3, and dielectric loss tangent (tgδ) values are lower than neat CE resin.     

Preparation and properties of cyanate ester/polyorganosiloxane blends with lower dielectric loss and improved toughness

Novel modified cyanate ester resins (EPMPS‐n/BADCy), with significantly decreased dielectric loss and improved toughness, were developed by copolymerizing the cyanate ester resin, 2, 2′‐bis (4‐cyanatophenyl) isopropylidene resin) (BADCy), with an epoxidized methyl phenyl silicone resin (EPMPS). The curing behavior of EPMPS‐n/BADCy and the typical properties of the corresponding cured EPMPS‐n/BADCy were systematically investigated. The results show that the addition of EPMPS into BADCy can not only accelerate the curing reaction of BADCy, but also decrease dielectric loss and enhance the impact strength as well as water resistance. For example, in the case of the modified BADCy resin with 15 wt%EPMPS, its impact strength is 17.8 kJ/m², about 3 times of that of pure BADCy resin and its water absorption is only 0.25%, about one‐half of that of pure BADCy resin. In addition, while the dielectric loss is only 79% of that of pure BADCy resin, while its dielectric constant remains constant over the frequency range of 1KHz‐1 MHz. The above results suggest that EPMPS‐n/BADCy have great potential to be used as the matrix or adhesive for advanced composites. Copyright © 2009 John Wiley & Sons, Ltd.     

Experimental study on liquid fire behavior at different effective ceiling heights in a full-size simulated cargo compartment

A phosphorus-containing maleimide flame retardant (BDMP) was synthesized via the addition reaction between 9,10-dihydro-9-oxa-10-phosphaphenanthrene 10-oxide and N,N′-bismaleimide-4,4′-diphenylmethane. The structure of BDMP was characterized by Fourier-transform infrared spectroscopy (FTIR), ¹H and ³¹P nuclear magnetic resonance and elemental analysis. The thermal, flame-retardant and mechanical properties of the flame-retardant cyanate ester system were investigated by thermogravimetric analysis (TG), limiting oxygen index (LOI), vertical burning (UL-94), cone calorimeter test and dynamic mechanical analysis. The TG results indicated that the initial decomposition of modified CE resin shifted from 416 to 363 °C, and on the contrary, the char yield increased from 38.8 to 44.5%. The results of combustion tests indicated that the CE with highest phosphorus content acquired LOI value of 37% and achieved a UL-94 V-0 rating. The peak heat release rate, average heat release rate and average of effective heat combustion (av-EHC) of that group decreased by 39.5, 31.2 and 41.8%, respectively. In addition, the increase in phosphorus content led to a decrease in av-EHC and average CO₂ yield, and an increase in average CO yield, indicating that BDMP led to an incomplete combustion of the modified CE system. The flame-retardant mechanism was investigated by TG–FTIR, scanning electron microscope and cone calorimeter. Last but not least, the dielectric constant of modified CE system showed a slight fluctuation from 2.96 to 3.02 at 1 GHz, which was lower than that of neat CE.     

Synthesis of mesoporous silica and its modification of bismaleimide/cyanate ester resin with improved thermal and dielectric properties

A novel method is proposed to synthesize new mesoporous silica containing amine groups (MPSA), and it was further employed to modify bismaleimide‐dialllyl bisphenol (BD)/cyanate ester (CE) resin to form novel MPSA/BD/CE hybrids; in addition, the typical properties of MPSA/BD/CE were systematically investigated. Results show that these hybrids have very low dielectric constant and loss as well as good thermal properties. Compared with BD/CE resin, all hybrids have not only decreased dielectric constant and loss but also similar dependence of dielectric properties on frequency over the whole frequency from 10 to 10⁶ Hz. Specifically, with the addition of MPSA to BD/CE resin, the dielectric constant reduces from 3.5 to 3.0, and the dielectric loss is only 85% of that of BD/CE resin. Note that all hybrids show better thermal resistance (reflected by higher glass transition temperature, decreased maximum degradation rate, and higher char yield at 800°C) than BD/CE resin. All these differences in macro‐properties are attributed to the different structure between MPSA/BD/CE hybrids and BD/CE resin. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis and characterization of novel low‐dielectric cyanate esters

For the purpose of increasing the mobility of residual bisphenol A dicyanate ester (BADCY) during the final stage of curing and achieving a complete reaction of cyanate groups, a small quantity of monofunctional phenol was added to BADCY to form an imidocarbonate, or a small quantity of monofunctional cyanate esters was added to form cyanate ester copolymers. The proposed structures were confirmed with Fourier transform infrared, elemental analysis, mass spectrometry, and NMR spectroscopy. The thermal properties of the cured cyanate esters were measured with dynamic mechanical analysis, thermogravimetric analysis, and dielectric analysis. These data were compared with those for the cured BADCY resin. The cured modified cyanate esters exhibited a lower dielectric constant, a lower dissipation factor, and lower moisture absorption than the cured BADCY system. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2589–2600, 2004     

Novel toughened cyanate ester resin with good dielectric properties and thermal stability by copolymerizing with hyperbranched polysiloxane and epoxy resin

A novel toughened cyanate ester (CE) resin with good dielectric properties and thermal stability was developed by copolymerizing 2,2′‐bis(4‐cyanatophenyl)iso‐propylidene (BCE) with a combined modifier (HBPSiEP) made up of hyperbranched polysiloxane (HBPSi) and epoxy (EP) resin. HBPSi was synthesized through the hydrolysis of 3‐(trimethoxysilyl)propyl methacrylate. The effect of differing stoichiometries of HBPSiEP on the curing characteristics and performance of BCE resin is discussed. Results show that the incorporation of HBPSiEP can not only effectively promote the curing reaction of BCE, but can also significantly improve the toughness of the cured BCE resin. In addition, the toughening effect of HBPSiEP is greater than single EP resin. For example, the impact strength of modified BCE resin with 30 wt% of HBPSiEP is 23.3 KJ/m², which is more than 2.5 times of that of pure BCE resin, while the maximum impact strength of EP/BCE resin is about 2 times of pure BCE resin. It is worthy to note that HBPSiEP/BCE resins also exhibit improved thermal stability, dielectric properties, and flame retardancy, suggesting that the novel toughened CE resins have great potentiality to be used as a matrix for advanced functional composites or electronic packing resins. Copyright © 2009 John Wiley & Sons, Ltd.     

Flame retardancy and flame retarding mechanism of high performance hyperbranched polysiloxane modified bismaleimide/cyanate ester resin

A novel kind of modified bismaleimide/cyanate ester (BCE) resins by copolymerizing with hyperbranched polysiloxane including high content of phenyl (HBPSi) was first reported. The effect of HBPSi on the curing mechanism, and that on the dielectric properties and flame retardancy of cured networks were systemically investigated. Results show that compared with BCE resin, HBPSi/BCE resin has obviously different cross-linked structure, and thus leading to simultaneously improved dielectric properties and flame retardancy. The reactions between HBPSi and the decomposition structure of BCE resin change the thermo-oxidative degradation mechanism of the first step in the thermo-oxidative degradation; in addition, the presence of HBPSi in BCE resin also significantly reduces the mass loss rate (MLR) and increases char yield at 800 °C under an air atmosphere. Therefore, the positive effect of HBPSi on improving the flame retardancy is attributed to the condensed phase mechanism. On the other hand, HBPSi/BCE resins exhibit improved dielectric properties (including decreased dielectric constant and loss) with increasing the content of HBPSi. More importantly, this investigation demonstrates that designing new polysiloxane with suitable chemical structure is important to develop high performance resins with attractive flame retardancy and dielectric properties.     

环氧树脂与氰酸酯共固化产物性能的研究

环氧树脂是一类综合性能优良并获广泛应用的热固性树脂基体 .但是通常的环氧树脂基体中含有大量反应生成的羟基等极性基团 ,吸湿率高 ,使其复合材料在湿热环境下力学性能和介电性能显著下降 .应用氰酸酯改性固化的环氧树脂等热固性树脂 ,将赋予以其为基体的复合材料以优异的耐热性能、力学性能和介电性能[1 ,2 ] .这类复合材料的研究开发对特种电子电气绝缘材料和先进复合材料的发展具有重要意义 .作者曾应用ＦＴ ＩＲ、ＤＳＣ等分析技术对氰酸酯与环氧树脂 (氰酸酯在欠量、适量和过量条件下 )的共固化反应机理和固化物结构特征等进行过深入…     

Investigation of correlation between microstructure and dielectric properties of cyanate ester/silicate tube hybrids by positron annihilation lifetime spectroscopy

The correlation between microstructure and dielectric properties of cyanate ester (CE)/hollow silicate tube (HST) hybrids was investigated by positron annihilation lifetime spectroscopy, coincidence Doppler‐broadening spectroscopy, Fourier transform infrared spectra, and dynamic mechanical analyses. The addition of HST to CE resin brings a multi‐aspect influence (cross‐linked structure and density, free volume, and interfacial action) on the structure of the cross‐linked network and thus results in significantly varied dielectric properties. There is an optimum content of HST in hybrids to get the lowest dielectric constant and loss. When the content of HST is smaller than the percolation threshold, the hybrid has decreased dielectric constant and loss; this mainly results in the reduced size of free volume and orthopositronium intensity (I₃), although when the content of HST is larger than the threshold, the increased I₃ and the size of free volume as well as the interfacial polarization are responsible for the significantly enlarged dielectric constant and loss. Copyright © 2011 John Wiley & Sons, Ltd.     

Thermoplastic modification of monomeric and partially polymerized Bisphenol A dicyanate ester

Bisphenol A dicyanate ester (BADCy) was modified with different amounts of an engineering thermoplastic, polysulfone (PS) to improve impact strength of the parent resin. Differential scanning calorimetry of the blends suggested that addition of PS widens the curing exotherm of the BADCy considerably. FTIR of cured neat resins indicated total conversion of cyanate functional groups into triazine rings by cyclotrimerization. The cured neat resins showed phase separated morphology with cyanate ester as the continuous phase. The modified resins were shown to have better thermal, hygrothermal and impact strength properties. However, when glass fiber reinforced composites were made using partially polymerized BADCy and PS, very little or no phase separation in the resin was noticed. Flexural and impact strength measurement of composites showed that PS modification has compromised the flexural properties and only retained the impact strength of the parent resin containing composite. This study thus suggests that improvements realized in thermoplastic modification of monomeric BADCy are not directly transferable to composites using a partially prepolymerized BADCy.     

Toughening of cyanate ester resin by carboxyl terminated nitrile rubber

The carboxyl terminated butadiene‐acrylonitrile (CTBN) rubber was used to improve the toughness of the cyanate ester (CE) resin. The toughness of the modified blends depended on the CTBN content. The addition of 10 phr (g/100gCE) CTBN in CE resin led to a 200% increase in the impact strength with a loss of storage modulus. The transmission electron microscopy result showed the existence of rubber particles, inferring that phase separation had occured after curing. The thermogravimetric analysis curve of CTBN indicated the presence of cavities which also can be observed on the fractured surface in the scanning electron microscopy pictures using high magnification. Thus, phase‐separation and cavities toughening mechanisms function together to improve the toughness. Copyright © 2004 John Wiley & Sons, Ltd.     

Thermal and physical properties of flame-retardant epoxy resins containing 2-(6-oxido-6H-dibenz〈c,e〉〈1,2〉oxaphosphorin-6-yl)-1,4-naphthalenediol and cured with dicyanate ester

2-(6-oxido-6H-dibenz(c,e)(1,2)oxaphosphorin-6-yl)-1,4-naphthalenediol (DOPONQ) was prepared by the addition reaction of 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) with 1,4-naphthoquinone. The phosphorus-containing diol (DOPONQ) was used as a reactive flame retardant by an advancement reaction with the diglycidyl ether of bisphenol-A epoxy (DGEBA) resin at various stoichiometric ratios. DOPONQ-containing advanced epoxy was separately cured with various dicyanate esters to form flame-retardant epoxy/cyanate ester systems. The effect of the phosphorus content and dicyanate ester structure on the curing characteristic, glass transition temperature, dimensional stability, thermal stability, flame retardancy, and dielectric property was studied and compared with that of the control advanced bisphenol-A epoxy system. The DOPONQ-containing epoxy/cyanate ester systems exhibited higher glass transition temperatures as well as better thermal dimensional and thermal degradation stabilities. The flame retardancy of the phosphorus-containing epoxy/dicyanate ester system increased with the phosphorus content, and a UL-94 V-0 rating could be achieved with a phosphorus content as low as 2.1%.     

Free volume hole size of Cyanate ester resin/Epoxy resin interpenetrating networks and its correlations with physical properties

Cyanate ester (CE) resin was blended with epoxy resin (EP) at different mass ratios (CE/EP: 100/0, 90/10, 70/30, 50/50, 30/70, 10/90, and 0/100). The curing process of the blend system was characterized by Fourier transform infrared spectrometry (FTIR) and differential scanning calorimetry (DSC). Examination of the mechanical properties, thermal stability, and morphology of the blend systems showed that addition of epoxy resin resulted in improved toughness but a little sacrifice in thermal stability when compared with neat CE. The free volume size of the blend system determined by positron annihilation lifetime spectroscopy (PALS) decreased with the epoxy resin content, which is consistent with the chemical structure changes for the copolymerization between CE and EP. The crosslinking units of curing products (oxazoline, oxazolidinone, and polyether network) of the blends are all smaller in size than those of triazine ring structure from neat CE. Therefore, the free volume size of the blends decreases with increase of EP content. The correlations between the free volume properties and other physical properties (thermal stability and mechanical properties) have also been discussed.     

Synthesis and properties of a cyanate ester containing dicyclopentadiene(II)

A 2,6‐dimethyl phenol‐dicyclopentadiene novolac (DCPDNO) was synthesized from dicyclopentadiene and 2,6‐dimethyl phenol, and the resultant DCPDNO was reacted with cyanogen bromide into 2,6‐dimethyl phenol‐dicyclopentadiene cyanate ester (DCPDCY). The structures of the novolac and cyanate ester were confirmed with Fourier transform infrared spectroscopy, elemental analysis, mass spectrometry (MS), and nuclear magnetic resonance. For the purpose of increasing the mobility of residual DCPDCY during the final stage of curing and achieving a complete reaction of cyanate groups, a small quantity of a monofunctional cyanate ester, 4‐tert‐butylphenol cyanate ester (4TPCY), was added to DCPDCY to form the cyanate ester copolymer. The synthesized DCPDCY was then cured with 4TPCY at various molar ratios. The thermal properties of the cured cyanate ester resins were studied with dynamic mechanical analysis, dielectric analysis, and thermogravimetric analysis. These data were compared with those of the commercial bisphenol A cyanate ester system. Compared with the bisphenol A cyanate ester system, the cured DCPDCY resins exhibited lower dielectric constants (2.52–2.67 at 1 GHz), dissipation factors (0.0054–0.0087 at 1 GHz), glass‐transition temperatures (261–273 °C), thermal stability (5% degradation temperature at 406–450 °C), thermal expansion coefficients (4.8–5.78 × 10^?5/°C before the glass‐transition temperature), and moisture absorption (0.8–1.1%). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 671–681, 2005     

Synthesis and properties of flame‐retardant benzoxazines by three approaches

We propose three approaches to obtain flame‐retardant benzoxazines. In the first approach, we synthesize a novel benzoxazine (dopot‐m) from a phosphorus‐containing triphenol (dopotriol), formaldehyde, and methyl amine. Dopot‐m is copolymerized with a commercial benzoxazine [6′,6‐bis(3‐phenyl‐3,4‐dihydro‐2H‐1,3‐benzoxazineyl)methane (F‐a)] or diglycidyl ether of bisphenol A (DGEBA). The thermal properties and flame retardancy of the F‐a/dopot‐m copolymers increase with the content of dopot‐m. As for the dopot‐m/DGEBA curing system, the glass‐transition temperature of the dopot‐m/DGEBA copolymer is 252 °C, which is higher than that of poly(dopot‐m). The 5% decomposition temperature of the dopot‐m/DGEBA copolymer increases from 323 to 351 °C because of the higher crosslinking density caused by the reaction of phenolic OH and epoxy. In the second approach, we incorporate the element phosphorus into benzoxazine via the curing reaction of dopotriol and F‐a. After the curing, the thermal properties of the F‐a/dopotriol copolymers are almost the same as those of neat poly(F‐a), and this implies that we can incorporate the flame‐retardant element phosphorus into the polybenzoxazine without sacrificing any thermal properties. In the third approach, we react dopo with electron‐deficient benzoxazine to incorporate the element phosphorus. After the curing, the glass‐transition temperatures of polybenzoxazines decrease slightly with the content of dopo, mainly because of the smaller crosslinking density of the resultant polybenzoxazines. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3454–3468, 2006     

Properties and characteristics of polylactide blends: Synergistic combination of poly(butylene succinate) and flame retardant

A study on the influence of flame‐retardant types, poly(butylene succinate) (PBS) contents, and combination of flame retardant and PBS on the mechanical, thermal, morphological, and flame retardancy properties of polylactide (PLA) and PLA/PBS blends was investigated. Blending of PLA, PBS, and flame retardant was prepared by a twin screw extruder. Tricresyl phosphate (TCP) and montmorillonite (MMT) were used as a flame retardant, whereas PBS acted as a flexible material for enhancing the fire resistance and toughness of PLA, respectively. The results revealed that the introducing of TCP and MMT greatly improved the impact strength of the PLA. The impact toughness of PLA blends with 20 wt% of PBS increased to about 244% that of neat PLA. The addition of flame retardants markedly improved the limiting oxygen index of PLA from 18.0% to 30.1% and 24.3% for the blends containing TCP and MMT. The V‐0 rating in UL‐94 testing was achieved with PLA/TCP blend. Elongation at break, impact toughness, and thermal stability of PLA significantly increased with the increment of PBS concentration. The synergistic effect of flame retardant and PBS afforded the PLA blends with outstanding increase of impact resistance. Furthermore, the flame retardant of TCP in the system not only affected dripping behavior and total flame time of PLA/PBS blends but also improved limiting oxygen index values due to the forming of char layer and inhibiting of burning mechanism.     

Cyanate ester tethered POSS/BACY nanocomposites for low‐k dielectrics

Low‐k dielectrics have been developed as an interlayer insulating material in the large scale integrated circuitry devices by the copolymerization of various weight percentages (10, 20, 30, and 40 wt%) of cyanate ester tethered POSS (POSS‐OCN) and bisphenol‐A cyanate ester (BACY) to obtain BACY/POSS‐OCN nanocomposites. The reinforcement of POSS‐OCN significantly contributes to the reduction in the value of dielectric constant and dielectric loss as well, which might be due to the presence of porous structured POSS‐OCN. The 30 wt% POSS‐OCN/BACY nanocomposite possesses the lowest value of dielectric constant of 1.81 at 1 MHz. Copyright © 2016 John Wiley & Sons, Ltd.     

Thermal and water absorption properties of cyanate ester resins modified by fluoride‐containing and silicone‐containing components

In order to enhance the moisture resistance of cyanate ester resins, modifiers containing silicon or fluorine moieties were introduced. The curing behaviors of the obtained resins, as well as thermal, water absorption, and dielectric properties of all cured polymers, were investigated in detail. Results show that properties of fillers in polymer have great influence on the thermal property and of polymer. In all cases, modifier exhibited percolation threshold at 5 wt%. Compared with pristine cyanate ester resins (CE), when the methyl phenyl silicone resin B filler was added, the cured polymer exhibited water absorption as low as 0.39% and excellent thermal oxygen stability at 300°C. The introduction of silicon H improved thermal oxidative stability at 400°C without significant compromise in processability or mechanical properties.