Size of a polymer chain in an environment of quenched chains

We perform high‐coordination three‐dimensional (3D) lattice simulations of a single chain of N monomers embedded in matrices of quenched chains, at different concentrations ρ, using pruned‐enriched Rosenbluth sampling. The partition function is well‐described by the expression, , where is a universal constant, and is the concentration dependent lattice connectivity constant. For sufficiently long chains, , we find that the radius of gyration R varies nonmonotonically with ρ; R decreases gradually from its unperturbed dimensions R₀ until , after which it increases relatively rapidly due to repulsion between monomers. Motivated by the similarity in the shape of the curves, and results on Gaussian chains, we successfully superpose all the simulation data onto a single master curve. Finally, we test the relationship , suggested by a Flory‐type scaling model, where ρ_c is the critical percolation threshold, and is a universal constant. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1611–1619     

Extension rate of the straight jet in electrospinning of poly(N‐isopropyl acrylamide) solutions in dimethylformamide: Influences of flow rate and applied voltage

In the electrospinning process, the measurement of extension rate of the straight jet is not an easy task. In this study, the diameter profile of the tapering straight jet is determined with a laser light‐scattering technique. Afterwards, the jet extension rate () is derived and used to compare with the solution‐intrinsic rates, for example, the terminal relaxation rate and the Rouse relaxation rate. The extension rate of the straight jet depends on position: it is highest near the cone apex (region I) and decays to a constant value in the major jet (region II) until approaching the jet end (region III), at which the extension rate abruptly drops to nearly zero, that is, _I >_II ≫_III ∼ 0. The jet diameter in region III is independent of solution concentration and applied voltage, but is scaled to the flow rate with an exponent of ∼0.37. The derived exponent is consistent with a simple prediction based on the counterbalance between the stretching electric force and the compressive force induced by the air drag force. Provided that air friction becomes overwhelming at the straight jet end, the long electrified jet is likely to buckle, thereby triggering the instability of jet whipping. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 319–329     

Controlling aggregate formation in conjugated polymers by spin‐coating below the critical temperature of the disorder–order transition

Aggregates – that is short‐ranged ordered moieties in the solid‐state of π‐conjugated polymers – play an important role in the photophysics and performance of various optoelectronic devices. We have previously shown that many polymers change from a disordered to a more ordered conformation when cooling a solution below a characteristic critical temperature . Using in situ time‐resolved absorption spectroscopy on the prototypical semiconducting polymers P3HT, PFO, PCPDTBT, and PCE11 (PffBT4T‐2OD), we show that spin‐coating at a temperature below can enhance the formation of aggregates with strong intra‐chain coupling. An analysis of their time‐resolved spectra indicates that the formation of nuclei in the initial stages of film formation for substrates held below seems responsible for this. We observe that the growth rate of the aggregates is thermally activated with an energy of 310 meV, which is much more than that of the solvent viscosity (100 meV). From this we conclude that the rate controlling step is the planarization of a chain that is associated with its attachment to a nucleation center. The success of our approach for the rather dynamic deposition method of spin‐coating holds promise for other solution‐based deposition methods. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 532–542     

Nonmonotonic swelling of agarose‐carbopol hybrid hydrogel: Experimental and theoretical analysis

A hybrid gel is synthesized by physical mixing of agarose and carbopol and an interpenetrating network of Agarose‐Carbopol (AC) hybrid gel is observed by atomic force microscopy. This hybrid gel exhibits pH‐responsiveness and mechanical stability as well as tunable swelling. These hydrogels depict a nonmonotonic swelling behavior as a function of pH. In particular, the equilibrium degree of swelling increases with pH of bath solution until its maximum value around pH = , followed by a decrease at higher pH values. The degree of swelling is increased by the concentration of carbopol when the concentration of agarose is low [ ], or decreased by the concentration of agarose when is high [ ]. A physics‐based model is also adapted to characterize the swelling‐shrinking behavior of different compositions of AC gels. This swelling‐shrinking behavior of AC hydrogels will have potential applications in smart hydrogel‐based devices. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 444–454     

Structure of sodium carboxymethyl cellulose aqueous solutions: A SANS and rheology study

We report a small angle neutron scattering (SANS) and rheology study of cellulose derivative polyelectrolyte sodium carboxymethyl cellulose with a degree of substitution of 1.2. Using SANS, we establish that this polymer is molecularly dissolved in water with a locally stiff conformation with a stretching parameter . We determine the cross sectional radius of the chain ( 3.4 Å) and the scaling of the correlation length with concentration (ξ = 296 c^?1∕2Å for c in g/L) is found to remain unchanged from the semidilute to concentrated crossover as identified by rheology. Viscosity measurements are found to be in qualitative agreement with scaling theory predictions for flexible polyelectrolytes exhibiting semidilute unentangled and entangled regimes, followed by what appears to be a crossover to neutral polymer concentration dependence of viscosity at high concentrations. Yet those higher concentrations, in the concentrated regime defined by rheology, still exhibit a peak in the scattering function that indicates a correlation length that continues to scale as . © 2014 The Authors. Journal of Polymer Science Part B: Polymer Physics Published by Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 492–501     

Variation of the strain rate during CSM nanoindentation of glassy polymers and its implication on indentation size effect

The indentation strain rate is currently assumed to remain unvaried during continuous stiffness measurement (CSM) nanoindentation where is imposed to remain constant. To probe the validity of this assumption for the nanoindentation of glassy polymers, a series of experiments have been performed at different set values on poly(methyl methacrylate) and polycarbonate using CSM technique. It is firstly shown that the actual value changes drastically at shallow indentation depths and it takes a considerable depth, which is material independent, for this parameter to attain a stabilized value. Furthermore, the strain rate is measured directly as the descent rate of the indenter divided by its instantaneous depth ( ), and indirectly via considering the variations of the load and hardness during the test. Both of these approaches reveal that the strain rate is considerably larger at shallow depths, and the depth beyond which it becomes constant is material and ratio dependent. Finally, by considering the relationship between the hardness and strain rate, it is observed that although the strain rate variation alters the hardness, its contribution is not able to justify the observed indentation size effect; hence, other contributing factors for this phenomenon are discussed for their possible effects. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2179–2187     

Crystallinity of poly(3‐hexylthiophene) in thin films determined by fast scanning calorimetry

Using fast scanning calorimetry, we determined the crystallinity of thin films of poly(3‐hexylthiophene) crystallized from the melt from measurements of the specific melting enthalpy. A broad range of film thicknesses from 10 µm down to 26 nm was covered. The sample mass was determined from measurements of the specific heat capacity in the molten state allowing a quantitative analysis of the heat flow data. Films with a thickness 400 nm slowly cooled from the melt showed the same crystallinity as bulk samples measured with conventional DSC. Below 350 nm the melting enthalpy decreased strongly. We assign this strongly reduced crystallinity to the restricted crystallization kinetics originating from hindered spherulitic growth under thin film confinement. A higher crystallinity could be partially regained by extended isothermal crystallization at elevated temperatures. Much faster cooling, with rates above about 100 Ks^?1 led to a partial suppression of crystallization even for thick films. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1791–1801     

Influence of the crystallization on the molecular mobility and ionic DC conductivity behaviors of relaxor ferroelectric P(VDF‐TrFE‐CTFE) terpolymers

The dynamics of semicrystalline poly(vinylidene fluoride‐trifluoroethylene‐chlorotrifluoroethylene) (P(VDF‐TrFE‐CTFE)) terpolymers were fully investigated as a function of temperature and frequency, by means of broadband dielectric spectroscopy. Four types of relaxation regimes were observed over the full dielectric spectroscopy, namely (second) relaxation in the sub‐glass state, (segmental dynamics) in the rubbery state, the Curie transition and space charge carrier motion at high temperatures. Constrained segmental dynamics were observed in the terpolymer containing the highest crystalline fraction for which a narrow relaxation time distribution was found. These results indicate a decreasing average size of the cooperative rearranging region over the crystalline fraction. A decrease of the strength index values also implied a more fragile behavior for terpolymers with a higher degree of crystallinity. An exceptional increase in dielectric strength was found as the crystallinity increased. This behavior could be explained by an enhanced interphase (constrained amorphous phase). The Curie transition showed an accelerating relaxation rate for a more fragile terpolymer. Moreover, a motion of the space charge carrier ions was observed in the higher temperature range. Finally, there was evidence that the segmental dynamics in the amorphous phase was responsible for the motion of the space charge carrier ions. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1645–1657     

Enthalpy of fusion of poly(3‐hexylthiophene) by differential scanning calorimetry

The enthalpy of fusion for a perfect, infinite poly(3‐hexylthiophene) (P3HT) crystal () must be known to evaluate the absolute crystallinity of P3HT. This value, however, is still ambiguous as different values have been reported using various experimental techniques. Here, we extrapolate the enthalpy of fusion for extended chain crystals of oligomeric P3HT to infinite molecular weight and obtain a value of 42.9 ± 2 J/g employing differential scanning calorimetry with a correction based on grazing incidence small angle X‐ray scattering data. Also, we define the onset of chain folding within P3HT crystallites at a chain length of 5 Kuhn segments. Knowledge of allows calculation of P3HT percent crystallinity in thin films for applications such as organic field effect transistors and solar cells. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1469–1475     

Triplet harvesting in poly(9‐vinylcarbazole) and poly(9‐(2,3‐epoxypropyl)carbazole) doped with CdSe/ZnS quantum dots encapsulated with 16‐(N‐carbazolyl) hexadecanoic acid ligands

Semiconductor quantum dots (QDs) can be used as alternative for transition metal complexes to harvest the nonemissive triplet excitons in organic light‐emitting diodes (OLEDs). In search for a QD‐based OLED material generating blue emission, poly(9‐vinylcarbazole) (PVK) and poly(9‐(2,3‐epoxypropyl) carbazole) (PEPK) are chosen as host for blue‐emitting CdSe/ZnS core/shell QDs. The QDs are encapsulated with 16‐(N‐carbazolyl) hexadecanoic acid (C16), a ligand terminated by a carbazole moiety. As alternative for PVK, PEPK, where the lower molecular weight and less extensive excimer formation could promise a better film formation and more extensive exciton hopping, is explored. The efficiencies of singlet ( ) and triplet ( ) energy transfer to the C16 capped QDs are estimated by combining stationary photoluminescence spectra and fluorescence decays of pristine polymer films with those of polymer films doped with the QDs. At a loading of 30 wt % of the QDs, increases from 12 ± 1% in PVK to 41 ± 2% in PEPK while increases from 37 ± 22% in PVK to 72 ± 48% in PEPK. The investigation of the film morphology by atomic force microscopy confirms that the main factor limiting the triplet transfer efficiency in the PVK matrix is the clustering of the C16 capped QDs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 539–551     

Spin–orbit effects on magnetically induced current densities in the () clusters

This study reports the spin–orbit effects on the aromaticity of the , , , , , and anionic clusters via the magnetically induced current‐density method. All‐electron density functional theory (DFT) calculations were carried out using the four‐component Dirac‐Coulomb (DC) hamiltonian, including scalar and spin–orbit relativistic effects. The magnetic index of aromaticity was calculated by numerical integration over the current flow between two atoms in the pentagonal ring. These values were compared to the spin‐free values (spin–orbit coupling switched off), in order to assess the spin–orbit effect on aromaticity. It was found that in the heavy anions, and , there is a significant influence of the spin–orbit coupling. © 2018 Wiley Periodicals, Inc.     

Structure,stability, and nature of bonding in carbon monoxide bound complexes (E = group 14 element; X = H,F, Cl,Br, I)

A density functional theory study is performed to predict the structures and stability of carbon monoxide (CO) bound (E = C, Si, Ge, Sn, Pb; X = H, F, Cl, Br, I) complexes. The possibility of bonding through both C‐ and O‐sides of CO is considered. Thermochemical analysis reveals that all the dissociation processes producing CO and are endothermic in nature whereas most of the dissociation reactions are endergonic in nature at room temperature. The nature of bonding in E? C/O bonds is analyzed via Wiberg bond index, natural population analysis, electron density, and energy decomposition analyses in conjunction with natural orbitals for chemical valence scheme. In comparison to C? O stretching frequency ( ) in free CO, while a red shift is noted in O‐side binding, the C‐side binding results in a blue shift in . The relative change in values in CO bound complexes on changing either E or X is scrutinized and possible explanation is provided in terms of polarization in the σ‐ and π‐orbitals and the relative strength of C→E or O→E σ‐donation and E→C or E→O π‐back‐donation. © 2016 Wiley Periodicals, Inc.     

Ritz variational method for the high‐lying nonautoionizing doubly excited 1,3Fe states of two‐electron atoms

Energy eigenvalues of nonautoionizing doubly excited states originating from 2pnf ( ) configuration of two‐electron atoms have been calculated by expanding the basis set in explicitly correlated Hylleraas coordinates under the framework of Ritz variational method. A detailed discussion on the evaluation of correlated basis integrals is given. The energy eigenvalues of a number of these doubly excited states are being reported for the first time especially for the high lying states. The effective quantum numbers ( ) for the states mentioned above have been calculated by using the theory of quantum defect.     

Geometric and electronic structures of silicon fluorides (N = 4 – 6) and potential energy surfaces for dissociation reactions → SiF4 + F– and → + F–

The geometric and electronic structures of a series of silicon fluorides (n = 4 ? 6) were computationally studied with the aid of density functional theory (DFT) method with B3LYP and M06‐2X functionals and coupled cluster (CCSD and CCSD(T)) methods with 6‐311++G(d,p) basis set. The nature of the Si‐F bonds in these compounds was analyzed in the framework of the natural bond orbital theory and natural resonance theory. Energy characteristics (heats of reactions and energy barriers) of the dissociation reactions → SiF₄ + F^– and → + F^– were calculated using the DFT and CCSD methods. The potential energy surface of elimination of a fluoride anion from has a specific topology with valley‐ridge inflection points corresponding to bifurcations of the minimal energy reaction path. © 2016 Wiley Periodicals, Inc.     

Unusual dynamics of ring probes in linear matrices

We perform Monte Carlo simulations of ring and linear polymers in linear matrices, and investigate the diffusivity of the probes. As the matrix chain length N_m is increased from 10 to 300 monomers, the diffusivity D_l of a linear probe (N_l = 300) decreases monotonically, while that of a ring probe D_r varies non‐monotonically, with a peak around . We perform additional simulations with a single probe molecule ( ) in a linear matrix ( ). The non‐monotonicity in D_r persists even after ring–ring interactions are eliminated. Topology dependent differences in the short‐time dynamics of the probes are observed; unlike linear probes, mean‐squared displacements of ring probes depend on N_m. Primitive path analysis suggests that the difference in dynamics originates from differences in entanglement structure. For linear probes, the degree of entanglement is independent of N_m. For ring probes, we observe two regimes: when N_m is small, the number of threadings decreases as N_m increases, eventually transitioning to a plateau. In the small N_m regime, the change in the degree of entanglement offsets the change in the mobility of the matrix chains, leading to a non‐monotonic variation in D_r. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 169–177     

Rationalizing the self‐assembly of poly‐(3‐hexylthiophene) using solubility and solvatochromic parameters

The assembly of poly(3‐hextylthiophene) (P3HT) in solvent mixtures is studied using solubility and solvatochromic parameters. Correlations between the excitonic coupling of P3HT assemblies and the Kamlet–Taft (α, β, π*) and solvent scales reveal that lower excitonic coupling values are observed in binary mixtures characterized by low β values (0 < β ≤ 0.25) and low polarity (0.1 ≤ ≤ 0.3). Hansen solubility theory is revisited by evaluating the directionality of the solubility distance, R_a. Relationships between the excitonic coupling and the Δδ_h and Δδ_p vector components indicate that the polarity of the solvent (Δδ_p) and the specific solvent‐solvent interactions reflected by the Δδ_h component direct the formation of well‐ordered P3HT aggregates. The complementary results of the solubility and solvatochromic parameter analyses are in agreement with one another. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 841–850     

The Trifluoromethyl Anion: Evidence for [K(crypt‐222)]+

[K(crypt‐222)]⁺ ( 1 ) and [K(crypt‐222)]⁺ ( 3 ) are isostructural, displaying nearly identical unit cell parameters. The two structures are similar to the extent that the previously reported [K(crypt‐222)]⁺ model can be refined against the new data for [K(crypt‐222)]⁺ , with extra electron density being observed from the fourth fluorine atom of the . In agreement with experimental observations, theoretical calculations suggest that deprotonated [K(crypt‐222)]⁺ is highly unstable even at as low as 195 K. The previously considered 1:1 CHF ₃ clathrate of deprotonated [K(crypt‐222)]⁺ (crystallographically indistinguishable from 1 ) is ruled out on the basis of all available data.     

General build up of basis and matrix in the diagonalization approach. Determination of Kramers configuration state functions

Algorithms to build the basis and matrix representation to obtain the Kramers configuration space functions (KCSFs) via diagonalization will be formally generalized to an arbitrary number of unpaired (open shell) fermions. Effective build up of the matrix representation will be outlined (including threading and graphical processing unit parallelism) to subsequently obtain the KCSFs via calling external/numerical library routines for diagonalization. The effective build up of the matrix representation relays on a binary tree search algorithm to allow evaluation the action on a given basis vector. The binary tree search avoids the treatment of zero matrix elements which leads to an exponential acceleration. The implementation ( basis creation, matrix representation, and matrix diagonalization) will be done in an all in core and all at once manner, hence the available core memory sets the physical limits in practical applications. Memory limitations, sparsity of the matrix, general case of n fermions in m spinors, and the application of KCSFs will be put into further perspective.     

Nuclear quantum effects induce metallization of dense solid molecular hydrogen

We present an accurate computational study of the electronic structure and lattice dynamics of solid molecular hydrogen at high pressure. The band‐gap energies of the , Pc, and structures at pressures of 250, 300, and 350 GPa are calculated using the diffusion quantum Monte Carlo (DMC) method. The atomic configurations are obtained from ab initio path‐integral molecular dynamics (PIMD) simulations at 300 K and 300 GPa to investigate the impact of zero‐point energy and temperature‐induced motion of the protons including anharmonic effects. We find that finite temperature and nuclear quantum effects reduce the band‐gaps substantially, leading to metallization of the and Pc phases via band overlap; the effect on the band‐gap of the structure is less pronounced. Our combined DMC‐PIMD simulations predict that there are no excitonic or quasiparticle energy gaps for the and Pc phases at 300 GPa and 300 K. Our results also indicate a strong correlation between the band‐gap energy and vibron modes. This strong coupling induces a band‐gap reduction of more than 2.46 eV in high‐pressure solid molecular hydrogen. Comparing our DMC‐PIMD with experimental results available, we conclude that none of the structures proposed is a good candidate for phases III and IV of solid hydrogen. © 2017 Wiley Periodicals, Inc.     

Study on the coil–globule transition and dynamics of polymer chain confined in slit

The coil–globule transition and dynamics of a lattice self‐avoiding bond fluctuation polymer chain confined in slit are studied by Monte Carlo simulations. The coil–globule transition temperature of polymer chain is increased at intermediate slit height H (H ∼ R_G0 with R_G0 the radius of gyration of polymer in dilute solution) due to the squeeze of the polymer in the repulsive slit, but it is decreased by surface attraction as the polymer is extended along the surface. We have compared the difference between the rotational relaxation time τ_R for the reorientation of end‐to‐end vector and the relaxation time τ for the polymer diffusing over a distance of the size of polymer. We find that τ_R is clearly distinct from τ as they have different scaling exponents in their slit height‐dependent behaviors and for the polymer in the extended coil state, that is, α_R > α. And both exponents increase with an increase in the intrapolymer attraction and surface attraction. However, these scaling relations are destroyed by strong surface attraction when the polymer is adsorbed on surfaces. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1053–1062