Super macroporous poly(N‐isopropyl acrylamide) cryogel for separation purpose

Polymers that can respond reversibly by changing their physical or chemical properties are recognized as stimuli‐responsive polymers. The renowned temperature‐sensitive polymer is poly(N‐isopropyl acrylamide) (p(NIPAM)), and here, homopolymeric supermacroporous p(NIPAM)) cryogel was synthesized via cryopolymerization technique at cryogenic condition (below melting point of solvent, −18°C). Then, the prepared p(NIPAM) cryogel was characterized via scanning electron microscopy, Fourier transform infrared radiation spectrometer, and thermogravimetric analyzer. The lower critical solution temperature (LCST) value of the prepared p(NIPAM) cryogel was determined from % swelling equilibrium swellings at various temperatures, 20, 25, 30, 35, 40, 45, and 50°C, respectively. Furthermore, the pore volume and porosity of p(NIPAM) cryogels were compared below and above the LCST values. Finally, the separation capability of p(NIPAM) cryogels for some molecules such as tannic acid, gallic acid, nicotine (N), and caffeine (C) was investigated at the below and above the LCST values.     

Hydrophobic cryogels for DNA adsorption: Effect of embedding of monosize microbeads into cryogel network on their adsorptive performances

As alternative hydrophobic adsorbent for DNA adsorption, supermacroporous cryogel disks were synthesized via free radical polymerization. In this study, we have prepared two kinds of cryogel disks: (i) poly(2‐hydroxyethyl methacrylate‐N‐methacryloyl‐l ‐tryptophan) [p(HEMA‐MATrp)] cryogel containing specific hydrophobic ligand MATrp; and (ii) monosize p(HEMA‐MATrp) particles synthesized via suspension polymerization embedded into p(HEMA) cryogel structure to obtain p(HEMA‐MATrp)/p(HEMA) composite cryogel disks. These cryogel disks containing hydrophobic functional group were characterized via swelling studies, Fourier transform infrared spectroscopy, elemental analysis, surface area measurements and scanning electron microscopy. DNA adsorption onto both p(HEMA‐MATrp) cryogel and p(HEMA‐MATrp)/p(HEMA) composite cryogels was investigated. Maximum adsorption of DNA on p(HEMA‐MATrp) cryogel was found to be 15 mg/g polymer. Otherwise, p(HEMA‐MATrp)/p(HEMA) composite cryogels significantly increased the DNA adsorption capacity to 38 mg/g polymer. Composite cryogels could be used repeatedly without significant loss on adsorption capacity after 10 repetitive adsorption–desorption cycles. Copyright © 2013 John Wiley & Sons, Ltd.     

Cryogenic Designing of Biocompatible Blends of Polyvinyl alcohol and Starch with Macroporous Architecture

The present paper discusses synthesis, characterization, and blood compatibility studies of macroporous cryogels of PVA and starch. Biocompatible spongy porous hydrogels of polyvinyl alcohol–starch have been synthesized by repeated freezing–thawing methods and characterized by Infra red (FTIR) and environmental scanning electron microscopy (ESEM) techniques, respectively, to gain insights for structural and morphological features. The FTIR analysis of prepared cryogels indicated that starch was introduced into the network of cryogel possibly via formation of hydrogen bonds between the PVA and starch clusters. The “cryogels” were evaluated for their water uptake potentials and influence of various factors such as chemical architecture of the spongy hydrogels, pH and temperature of the swelling bath were investigated on the degree of water sorption by the cryogels. The hydrogels were also swollen in salt solutions and various simulated biological fluids. The biocompatibility of the prepared cryogels was judged by in vitro methods of blood–clot formation viz. percent haemolysis and protein (BSA) adsorption. The cryogels were also studied for their pores morphology and percent porosity and the effect of chemical composition on the extent of porosity was also investigated.     

Developing column material for the separation of serum amyloid P and C reactive protein from biological sources

In this study, we have investigated the isolation of serum amyloid P (SAP) and C‐reactive protein (CRP) from rainbow trout. It has recently been found that SAP is deposited in atherosclerotic lesions or neurofibrillary tangles, which are related to aging process and Alzheimer's disease. Given the importance of CRP, the CRP level in blood is becoming recognized as a potential means of monitoring cardiovascular risk. These two proteins, members of the pentraxin family of oligomeric serum proteins, were isolated from rainbow trout using N‐methacryloyl‐phosphoserine (MA‐pSer) immobilized poly (2‐hydroxy ethylmethacrylate) (PHEMA) cryogels as a column material in a fast protein liquid chromatography system. The separation process was verified in two steps. First, SAP and CRP proteins were isolated together from serum sample of rainbow trout using MA‐pSer/PHEMA cryogel columns. Second, SAP protein was separated chromatographically from CRP protein using the Ca²⁺ ion immobilized PHEMA cryogel column. According to the data, a new and effective technique has been developed for the isolation of SAP and CRP proteins from a biological source, rainbow trout. Finally, purified SAP and CRP were loaded using sodium dodecyl sulfate–polyacrylamide gel and western blot analysis to investigate the purity of chromatographically isolated SAP and CRP compared with commertial SAP and CRP. Copyright © 2014 John Wiley & Sons, Ltd.     

Impact of double cryogelation process on a macroporous dye-affinity hydrogel

Cryogels with interconnected channels allow high flow-through properties and mass transfer when dealing with complex mixtures such as non-clarified crude extracts. However, their mechanical strength can be challenged due to a large void volume inside the polymeric network. We have addressed this problem by forming a double-layer cryogel applied as a dye-affinity chromatography gel. In this study, poly(acrylamide-co-allyl glycidyl ether) cryogel was prepared at sub-zero temperature. The second layer was then prepared inside the primary cryogel under the same conditions to form a double-layer network. Cibacron Blue F3GA, a dye molecule, was immobilized on the surface of the cryogels. Bovine serum albumin was used as a model molecule to study the adsorption/elution procedure in batch and continuous modes. The maximum batch binding capacity and the dynamic binding capacity for the single-layer cryogel were 18 and 0.11, and for the double-layer cryogel were 7.5 and 0.9 mg/g of gel, respectively. However, the mechanical stability of the double-layer cryogel increased 7-fold (144 kPa). It was found that the kinetic and adsorption isotherms follow pseudo-second-order and Freundlich models, respectively. The regeneration of the columns after adsorption/elution cycles was evaluated, and no significant loss of capacity was observed after 10 cycles.     

DNA adsorption via Co(II) immobilized cryogels

The separation and purification of important biomolecule deoxyribonucleic acid (DNA) molecules are extremely important. The adsorption technique among these methods is highly preferred as the adsorbent cryogels are pretty much used due to large pores and the associated flow channels. In this study, the adsorption of DNA via Co(II) immobilized poly(2-hydroxyethyl methacrylate-glycidyl methacrylate) [poly(HEMA-GMA)] cryogels was performed under varying conditions of pH, interaction time, initial DNA concentration, temperature, and ionic strength. For the characterization of cryogels; swelling test, Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), surface area (BET), elemental and ICP-OES analysis were performed. L-lysine amino acid was chosen as Co(II)-chelating agent and the adsorption capacity of cryogels was determined as 33.81 mg DNA/g cryogel. Adsorption of pea DNA was studied under the optimum adsorption conditions and DNA adsorption capacity of cryogels was found as 10.14 mg DNA/g cryogel. The adsorption process was examined via Langmuir and Freundlich isotherm models and the Langmuir adsorption model was determined to be more appropriate for the DNA adsorption onto cryogels.     

Composite Zn(II) Ferrocyanide/Polyethylenimine Cryogels for Point-of-Use Selective Removal of Cs-137 Radionuclides

The feasibility of several approaches to the fabrication of monolith composite cryogels containing transition-metal ferrocyanides for Cs⁺ ion uptake has been evaluated. Although in the series of investigated metal ion precursors (Cu(II), Zn(II), Ni(II), and Co(II)), in situ formation of the sorption active phase in polyethyleneimine (PEI) cryogel was feasible only in the case of Zn(II) ferrocyanide, this approach has shown significant advantages over the immobilization of ex situ synthesized ferrocyanide nanoparticles. Nanoparticles of the mixed ferrocyanide Zn_1.85K_0.33[Fe(CN)₆] formed in situ had an average size of 516 ± 146 nm and were homogeneously distributed in the monolith located at the polymer surface rather than embedded in the matrix. The Young modulus of the PEI cryogel increased after modification from 25 to 57 kPa, but composites maintained high permeability to the flow. Sorption of Cs⁺ ions has been investigated at superficial velocity up to 8 m/h. Steep breakthrough profiles and uptake efficiency of >99.5% until breakthrough point confirmed that a supermacroporous structure of the monolith composite assured good mass transfer, so that intraparticle diffusion was not the limiting stage of sorption kinetics. Application of the rate-constant distribution model (RCD model) to analyze the breakthrough curves of Cs⁺ sorption allowed the identification of two types of sorption sites with a difference in sorption rate constants of ~1 log unit. Most likely, sorption on “fast” sorption sites was governed by ion exchange between Cs⁺ ions in solution and K⁺ ions in the ferrocyanide lattice. Cs-137 radionuclide removal was investigated using the monolith composite columns of various geometries at superficial velocity up to the 6.6 m/h; specific gamma activity was reduced from 265 kBq/L to the background level, showing high potential of these materials for POU application.     

Lectin attached affinity cryogels for amyloglucosidase adsorption

Abstract

Preparation of poly[ethylene glycol dimethacrylate (EGDMA)-glycidyl methacrylate (GMA)] cryogel and its usability for amyloglucosidase adsorption were investigated. Cryogels were prepared by cryocopolymerization technique and then functionalized by lectin concanavalin A (Con A). The synthesized cryogel was characterized by FTIR, SEM and EDX analysis and then used for adsorption of amyloglucosidase in a continuous flow system. The maximal amyloglucosidase adsorption efficiency of Con A attached cryogel was found to be as 30.50?mg/g cryogel. Con A modified cryogels were used repeatedly for 30 times without any significant decrease at the amyloglucosidase adsorption capacity. SDS-PAGE and activity studies confirmed that the desorbed amyloglucosidase was active and retained 90% of its initial activity after the adsorption/desorption processes.     

Synthesis and characterization of supermacroporous cryogel with immobilized p-aminobenzenesulfonamide as affinity ligand for the purification of lactoperoxidase from whey

This study proposed the development of a monolithic supermacroporous affinity column for direct capture of lactoperoxidase, a glycoprotein present in milk, whey, and colostrum, with several applications due to its wide antimicrobial activity. A poly(acrylamide)-based cryogel was produced by radical co-polymerization of monomers in frozen aqueous solution and activated with p-aminobenzenesulfonamide as a ligand for specific interaction with the lactoperoxidase. The axial liquid dispersion coefficients at different liquid flow rates were determined by measuring residence time distributions using the tracer pulse-response method. The axial dispersion coefficient was low and the height equivalent to theoretical plate was not dependent on the flow velocity. The adsorptive capacity of affinity cryogel was studied as a function of flow velocity and the best condition was 0.9 cm/min. The response surface methodology was applied to optimize the capture of the enzyme, as a function of pH and salt concentration. Higher purification factor value was found at a salt concentration of 80 mmol/L and pH of 8.0 (p < 0.05). There was no influence of the variables under study on the yield (p > 0.05). The results indicated that affinity cryogel is a promising chromatography support for the use in high-throughput one-step purification of lactoperoxidase from whey.     

Preparation of supermacroporous cryogels with improved mechanical strength for efficient purification of lysozyme from chicken egg white

A novel, facile, and robust strategy was proposed to increase the pore size and mechanical strength of cryogels. By mixing the monomers of acrylamide and 2‐hydroxyethyl methacrylate as the precursor, a monolithic copolymer cryogel with large interconnected pores and thick pore walls was prepared. Hydrogen bonding between the two monomers contributed to the entanglement and aggregation of the copolymers, thickening the pore walls and resulting in larger pore sizes. Analysis via mercury porosimetry demonstrated that the interconnected pore diameter of the copolymer cryogel ranged from 10‐350 µm, which was far larger than that of the cryogels from one monomer (10‐50 µm). Additionally, the thicker pore walls of the copolymer cryogel improved its mechanical strength. Affinity cryogels were prepared through covalent immobilization using Tris(hydroxymethyl)aminomethane as a coupling agent, and the affinity binding of lysozymes on Tris‐cryogel was evaluated by the Langmuir isothermal adsorption with the maximum adsorption capacity of 360 mg/g. Compared with that of the Tris‐cryogels produced from one monomer, the copolymer Tris‐cryogel exhibited higher adsorption capacity and lysozyme purity, when the chicken egg white solution flowed solely driven by gravity. This work provides a new avenue for designing and developing supermacroporous cryogels for bioseparation.     

Ag nanoparticles deposited onto silica,titania, and zirconia mesoporous films synthesized by sol–gel template method

A variety of Ag nanoparticles/oxide mesoporous films with templated silica, titania, and zirconia was synthesized by sol–gel method at glass, aluminum, and silicon substrates using metal alkoxides (tetraethoxysilane, titanium tetraisopropoxide, and zirconium tetrapropoxide) and AgNO₃ as precursors of oxide films and Ag nanoparticles, respectively, and Pluronic P123 as a template agent. Oxide films alone and Ag/oxide composites were characterized using hexane adsorption, X-ray diffraction (XRD), Raman and ultraviolet (UV)/vis spectroscopies, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) methods. The distribution of Ag nanoparticles within the films, their sizes, intensity, and position of surface plasmon resonance (SPR) absorbance band at λ = 400 nm, as well as the textural and structural characteristics of whole films depend on treatment temperature, types of substrates and oxide matrices, oxide crystallization, and Ag content. Ag nanoparticles form preferably on the outer surface of the films under lower sintering temperatures if the amount of loaded silver is low. Oxide crystallization (e.g., TiO₂) promotes silver embedding into the outer film layer. At higher silver content (≥10 at.%) and higher calcination temperature (873 K), silver nanoparticles could be entrapped more uniformly along the film profile because of more intensive evaporation of silver droplets from the outer surface of the films on heating.     

Preparation of conducting silver paste with Ag nanoparticles prepared by e-beam irradiation

Conducting silver paste was prepared by using Ag nanoparticles which were synthesized by e-beam irradiation method (from KAERI); its conductivity was comparatively determined with Ag nanoparticles which were prepared by thermolysis method (commercial). The silver nanoparticles with the diameter of approximately 150 nm size prepared by e-beam irradiation were mixed with glass frit and sintered for 1 h at 500 °C. It is presumably concluded that the wt% of silver nanoparticle, size distribution and homogenous dispersibility of Ag nanoparticles in the pastes are the critical factors for the high conductivity of the paste. Among the various wt% of silver nanoparticle in the conducting silver pastes, silver paste with 90 wt% of silver nanoparticle has the highest conductivity as 1.6×10⁴ S cm^?1. This conductivity value is 1.6 times higher than the Ag pastes which were prepared with silver nanoparticles obtained by thermolysis method.     

Poly-L-Histidine Attached Poly(glycidyl methacrylate) Cryogels for Heavy Metal Removal

Poly-L-histidine immobilized poly(glycidyl methacrylate) (PGMA) cryogel discs were used for the removal of heavy metal ions [Pb(II), Cd(II), Zn(II) and Cu(II)] from aqueous solutions. In the first step, PGMA cryogel discs were synthesized using glycidyl methacrylate (GMA) as a basic monomer and methylene bisacrylamide (MBAAm) as a cross linker in order to introduce active epoxy groups through the polymeric backbone. Then, the metal chelating groups are incorporated to cryogel discs by immobilizing poly-L-histidine (mol wt ≥ 5000) having poly-imidazole ring. The swelling test, fourier transform infrared spectroscopy and scanning electron microscopy were performed to characterize both the PGMA and poly-L-histidine immobilized PGMA [P-His@PGMA] cryogel discs. The effects of the metal ion concentration and pH on the adsorption capacity were studied. These parameters were varied between 3.0–6.0 and 10–800 mg/L for pH and metal ion concentration, respectively. The maximum adsorption capacity of heavy metal ions of P-His@PGMA cryogel discs were 6.9 mg/g for Pb(II), 6.4 mg/g for Cd(II), 5.6 mg/g for Cu(II) and 4.3 mg/g for > Zn(II). Desorption of heavy metal ions was studied with 0.1 M HNO₃ solution. It was observed that cryogel discs could be recurrently used without important loss in the adsorption amount after five repetitive adsorption/desorption processes. Adsorption isotherms were fitted to Langmuir model and adsorption kinetics were suited to pseudo-second order model. Thermodynamic parameters (i.e. ΔH° ΔS°, ΔG°) were also calculated at different temperatures.     

Plant‐supported silver nanoparticles: Efficient,economically viable and easily recoverable catalyst for the reduction of organic pollutants

Ginger rhizome powder was used for the synthesis of supported metallic nanoparticle catalysts. A simple and novel adsorption method was used for the synthesis of silver nanoparticles loaded on ginger powder (Ag/GP), copper on ginger powder (Cu/GP) and nickel on ginger powder (Ni/GP). Among these, Ag/GP showed selective reduction of methyl orange and was used for further reactions. The prepared nanomaterials were characterized through X‐ray diffraction, transmission electron microscopy, field emission scanning electron microscopy, fourier transform infrared spectroscopy and energy‐dispersive X‐ray spectroscopy. The prepared Ag/GP catalyst was employed in the catalytic reduction of 4‐nitrophenol (4‐NP), 2‐nitrophenol (2‐NP), rhodamine B, methyl red and congo red. Ag/GP showed excellent catalytic reduction activity, the rate constants being 1.26 × 10^?3 and 2.38 × 10^?3 s^?1 for 2‐NP and 4‐NP, respectively. The turnover frequency reached 1.06 min^?1 for 2‐NP and 1.16 min^?1 for 4‐NP when using the Ag/GP catalyst. The prepared Ag/GP catalyst demonstrated outstanding activity for the degradation of a mixed solution of dyes. Also, stability and reusability of the prepared catalyst were investigated, which showed outstanding reusability up to five times and was stable up to five days.     

Preparation and Characterization of Semi-IPN Cryogels Based on Polyacrylamide and Poly(N,N-dimethylaminoethyl methacrylate); Functionalization of Carrier with Monochlorotriazinyl-β-cyclodextrin and Release Kinetics of Curcumin

Curcumin (CCM) is a natural hydrophobic polyphenol known for its numerous applications in the food industry as a colorant or jelly stabilizer, and in the pharmaceutical industry due to its anti-inflammatory, antibacterial, antioxidant, anti-cancer, and anti-Alzheimer properties. However, the large application of CCM is limited by its poor solubility in water and low stability. To enhance the bioavailability of CCM, and to protect it against the external degradation agents, a novel strategy, which consists in the preparation of semi-interpenetrating polymer networks, (s-IPNs) based on poly(N,N-dimethylaminoethyl methacrylate) entrapped in poly(acrylamide) networks, by a cryogelation technique, was developed in this work. All s-IPN cryogels were characterized by SEM, EDX, FTIR, and swelling at equilibrium as a function of pH. Functionalization of semi-IPN cryogel with monochlorotriazinyl-β-cyclodextrin (MCT-β-CD) led to IPN cryogel. The release profile of CCM from the composite cryogels was investigated at 37 °C, in pH 3. It was found that the cumulative release increased with the increase of the carrier hydrophobicity, as a result of increasing the cross-linking degree, the content and the molar mass of PDMAEMA. Fitting Higuchi, Korsmeyer–Peppas, and first order kinetic models on the CCM release profiles indicated the diffusion as the main driving force of drug release from the composite cryogels.     

Gallic acid‐loaded electrospun cellulose acetate nanofibers as potential wound dressing materials

Gallic acid (GA)–loaded cellulose acetate (CA) nanofiber mats with 10 to 40 wt.% GA contents (based on the weight of CA) were fabricated by electrospinning. The effects of GA contents and applied potential on the morphology and the average diameters of fibers were studied. The electrospun fiber mats containing 20 and 40 wt.% GA were investigated for their potential use as carrier of GA in wound dressing application. The GA‐loaded CA films were prepared by solvent casting technique for use in comparative studies. Determination of the release characteristics of GA from the GA‐loaded fiber mats and films was carried out by the total immersion and the transdermal diffusion through a pig skin method in acetate buffer solution (pH 5.5) or normal saline (pH 7.0) at either 32 or 37°C, respectively. In the total immersion method, the maximum amounts of the GA released from the fiber mats containing 20 and 40 wt.% GA in the acetate buffer were approximately 97% and 71% (based on the weight of initial GA), while those of the GA released into the normal saline were approximately 96% and 81%, respectively. Lower values were observed in the experiments of the transdermal diffusion through a pig skin method. The corresponding GA‐loaded CA films showed the lower amounts of GA released into media. The as‐loaded and the as‐released GA remained its antioxidant activity as investigated by 1,1‐diphenyl‐2‐picrylhydrazyl (DPPH) assay. Lastly, the GA‐loaded CA fiber mats exhibited antibacterial activity against Staphylococcus aureus, which showed the potential for use as wound dressing materials.     

Evaluation of selective composite cryogel for bromate removal from drinking water

Bromate, which is a potential carcinogen, should be removed from drinking water to levels of less than 10 μg/L. A chitosan‐based molecularly imprinted polymer (MIP) and a sol–gel ion‐exchange double hydrous oxide (Fe₂O₃·Al₂O₃·xH₂O) adsorbent (inorganic adsorbent) were prepared for this purpose. The sorption behavior of each adsorbent including sorption kinetics, isotherms, effect of pH and selective sorption were investigated in detail. Sorption experimental results showed that the MIP adsorbents had better selectivity for bromate, even in the presence of high concentrations of nitrate, as compared to the inorganic adsorbent. It was found that pH does not affect the adsorption of bromate when using the inorganic adsorbent. Additionally, both adsorbents were immobilized in a polymeric cryogel inside plastic carriers to make them more practical for using in larger scale. Regeneration of the cryogels either containing MIP or inorganic adsorbents were carried out by 0.1 M NaOH and 0.1 M NaCl, respectively. It was found that the regenerated MIP and inorganic adsorbents could be used at least three and five times, respectively, without any loss in their sorption capacity.     

Bifunctional AgCl/Ag composites for SERS monitoring and low temperature visible light photocatalysis degradation of pollutant

With the assistance of Polyvinylpyrrolidone (PVP), AgCl/Ag composites were fabricated in N, N-Dimethylformamide (DMF) solvent via a photoactivated route. The size of AgCl particles was in the range of 500 nm to 1 μm and the Ag particle's diameter was about 10–20 nm. Different from those core–shell structures reported before, the Ag nanoparticles were dispersed uniformly both on the surface and in the body of AgCl particles. The generation of such kind of composites was resulted from the reducing ability of DMF and light irradiation during the formation of AgCl particles. The as-obtained AgCl/Ag composites presented great activity for both surface-enhanced Raman scattering (SERS) detection and visible light photocatalytic degradation of organic dyes. Additionally, the AgCl/Ag composites could maintain high photocatalytic activity even though the ambient temperature was as low as 15 °C and recycle photocatalysis experiments indicated that the photocatalyst exhibited higher stability. Such kind of AgCl/Ag composites holds great potential for environmental monitoring devices and pollutant treatments.     

Graphene oxide embedded P(AAm)/PANI cryogel polymer composites for sensor application against pesticide,nitro compound,and organic dyes

Abstract

Graphene oxide (GO) embedded superporous poly(acrylamide) (P(AAm)) cryogel composites (P(AAm)-GO) were prepared and used as conductive sensor materials. For this goal, the GOs flakes within superporous P(AAm) cryogels were reduced in-situ employing hydriodic acid (HI), hydrazine (N₂H₄), and sodium borohydride (NaBH₄) as reducing agents. Amongst all reduced agents\the highest conductivity was observed for HI reduced P(AAm)-GO (P(AAm)-rGO) with 1.7?×?10^?6±9.7?×?10^?8 S.cm^?1. Then again, this P(AAm)-rGO was used for in-situ synthesis of conductive polymers, poly(aniline) (PANI), and poly(pyrrole) (PPy) by using oxidative polymerization technique. The SEM, FT-IR, TGA and conductivity measurements were done for the characterization of prepared cryogel composites. It was found that the conductivity of P(AAm)-rGO increased 70- and 1400-fold with the presence of PANI and PPy, respectively. Furthermore, potential sensor application of P(AAm)-rGO/conductive polymers were tested against herbicides such as paraquat, glyphosphate (G), and a phenolic compound, 4-nitrophenol (4-NP), and some dyes such as methylene blue (MB), methyl orange (MO). Conductivity of P(AAm)-rGO/PANI decreased 5.3 -fold upon reacting with 10?mL 50?ppm G solution. The sensitivity and effect of G amounts were also tested for P(AAm)-rGO/PANI cryogel composite.     

Biosynthesis of Silver Nanoparticles by <Emphasis Type="Italic">Geotricum</Emphasis> sp.

Nanoparticles are usually 1–100 nm in each spatial dimension considered as building blocks of the next generation of optoelectronics, electronics, and various chemical and biochemical sensors. In the synthesis of nanoparticles use of microorganisms emerges as an eco-friendly and exciting approach that reduce waste products (ultimately leading to atomically precise molecular manufacturing with zero waste); the use of nanomaterials as catalysts for greater efficiency in current manufacturing processes by minimizing or eliminating the use of toxic materials (green chemistry principles); the use of nanomaterials and nanodevices to reduce pollution (e.g. water and air filters); and the use of nanomaterials for more efficient alternative energy production (e.g. solar and fuel cells). Fungi have many advantages for nanoparticle synthesis compared with other organisms. In this study, Geotricum sp. found to successfully produce Ag nanoparticles. Geotricum sp. was grown in SDA (Sabro Dextrose Agar) medium at 25 ± 1 °C for 96 h. The mycelia were used to convert silver nitrate solution into nano-silver. Silver nanoparticles were synthesized using these fungi (Geotricum sp.) extracellularly. UV–VIS spectroscopy, Atomic Force Microscopy (AFM) and Scanning Electron Microscopy images shows the nanoparticle formation in the medium. Energy-dispersive X-ray spectroscopy (EDX) also confirmed that silver nanoparticles in the range of 30–50 nm were synthesized extracellularly. FTIR analyses confirmed the presence of amide (I) and (II) bands of protein as capping and stabilizing agent on the surface of nanoparticles.