温敏型聚合物PNIPAAm辅助的溶菌酶体外复性

合成了 3种具有不同分子量的温敏型聚合物聚 (N 异丙基丙烯酰胺 ) (PNIPAAm) ,测定了其分子量分布以及相应的低临界溶解温度 (LCST) .在溶菌酶复性溶液中加入PNIPAAm可促进溶菌酶复性 ,其中采用中等分子量M—PNIPAAm(Mw 为 2 2× 10 4 g mol)时溶菌酶的复性效果最佳 ,并采用荧光发射光谱技术表征了PMIPAAm分子结构对于溶菌酶结构的影响 .系统考察了采用M—PNIPAAm时 ,复性液中尿素浓度、蛋白质浓度和温度等条件对溶菌酶复性效果影响 .结果显示尿素与M—PNIPAAm对于溶菌酶复性呈现协同效应 ,复性操作温度不仅同溶菌酶自身特性有关 ,而且还受到M—PNIPAAm自身性质变化的影响 .研究结果表明温敏型高聚物在高浓度蛋白质的大规模体外复性中具有很好的应用前景     

Studies on Aggregation Interaction between Reduced Denatured Egg White Lysozymes during Refolding Procedure in Urea Solution

The aggregation interaction between reduced-denatured egg white lysozymes during refolding procedure in urea solution was studied by means of reducing and non-reducing protein electrophoreses. Results of non-reducing sodium dodecyl sulphate polyacrylamide gel electrophoresis （SDS-PAGE） of the supernatant and aggregate precipitate formed in refolding process show that except being refolded to native egg white lysozymes, the reduced-denatured lysozymes can also form the aggregates with molecular weights （MW） being separately about 30.0 and 35.0 kD, while the reducing SDS-PAGE and the refolding results in the presence of sodium dodecyl sulphate show that these aggregates are formed chiefly through the misconnection of disulfide bonds between the reduced-denatured lysozymes, and the aggregate precipitates are formed through the non-covalent interactions between the aggregates with molecular weight being about 30.0 kD. From the results of electrophoresis and size-exclusion chromatographic analyses, it can be inferred that the aggregates with molecular weights being about 30.0 and 35.0 kD are bi-molecular and tri-molecular egg white lysozyme aggregates, respectively. And finally, a suggested refolding mechanism of reduced-denatured egg white lysozymes in urea solution was presented.     

Chemical defects in the highly fluorescent conjugated polymer dots

We present strong evidence for the oxidation of conjugated polymers in the formation of conjugated polymer dots (CPdots) using Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. Although recent studies show that folding of the polymer chain into a compact 3D structure is involved in the formation of these nanoparticles, the process by which these intrinsically hydrophobic nanoscale particles circumvent aggregation in water is still not well understood. Zeta potential results show that these dots have a negatively charged surface at neutral pH, with a zeta potential and surface charge density of approximately -40 mV and (1.39 - 1.70) × 10(-2) C/m(2), respectively. In addition, quantitative elemental analysis of CPdots indicates that oxygen composes 7-13% of these nanoparticles. The overall results support the presence of chemical defects in forming a hydrophilic surface of CPdots. As a consequence, the charged surface contributes to inhibiting the aggregation of CPdots in water, leading to colloidal stability.     

Polymer Structure‐Guided Self‐Assisted Preparation of Poly(ester‐thioether)‐Based Hollow Porous Microspheres and Hierarchically Interconnected Microcages for Drug Release

Porous polymer microspheres (PPMs) have been widely applied in various biomedical fields. Herein, the self‐assisted preparation of poly(ester‐thioether)‐based porous microspheres and hierarchical microcages, whose pore sizes can be controlled by varying the polymer structures, is reported. Poly(ester‐thioether)s with alkyl side chains (carbon atom numbers were 2, 4, and 8) can generate hollow porous microspheres; the longer alkyl chain length, the larger pore size of microspheres. The allyl‐modified poly(ester‐thioether) (PHBDT‐g‐C₃) can form highly open, hierarchically interconnected microcages. A formation mechanism of these PPMs is proposed; the hydrophobic side chains‐mediated stabilization of oil droplets dictate the droplet aggregation and following solvent evaporation, which is the key to the formation of PPMs. The hierarchically interconnected microcages of PHBDT‐g‐C₃ are due to the partially crosslinking of polymers. Pore sizes of PPMs can be further tuned by a simple mixing strategy of poly(ester‐thioether)s with different pore‐forming abilities. The potential application of these PPMs as H₂O₂‐responsive vehicles for delivery of hydrophobic (Nile Red) and hydrophilic (doxorubicin hydrochloride) cargos is also investigated. The microspheres with larger pore sizes show faster in vitro drug release. The poly(ester‐thioether)‐based polymer microspheres can open a new avenue for the design of PPMs and provide a H₂O₂‐responsive drug delivery platform.     

Binding of thermo-sensitive and pH-sensitive butylated poly(allylamine)s with lysozyme

Butyl modified poly(allylamine)s with butyl substitution degrees of 15%to 70%were prepared.The polymers show pH sensitive property and lower critical solution temperature(LCST)behavior.The LCST appears at lower temperature,lower pH and lower polymer concentration for the polymer with higher butylated degree.The binding of native lysozyme with the polymers depends on the hydrophobicity of the polymers at the pH range that the protein and the polymer carry the same positive charges.The increase of polymer hydrophobicity can increase the binding with lysozyme,but the self-aggregation of the polymer decreases the binding.The bound lysozyme molecules can recover their native activity completely after the dissociation of the complexes.Compared with native lysozyme,the denatured one which exposes the hydrophobic residues can increase the binding with the polymer and form stable complex nanoparticles.     

Self‐Propagating Association of Zwitterionic Polymers Initiated by Ionene Polymers

A self‐propagating association of zwitterionic polymers is observed when a small amount of x,y‐ionene bromide (x = 3 or 6; y = 3, 4, 6, 10 or 12) polymer is added to aqueous solutions of zwitterionic polymer, poly[3‐dimethyl(methacryloyloxyethyl)ammoniumpropanesulfonate] (PDMAPS), to give large amount of PDMAPS precipitate. The self‐propagating association initiated by ionene polymers is explained in terms of the electrostatic interaction between the ionene polymers and the zwitterionic polymers whereupon the geometry of the charges on the polymer chains plays an important role.     

Studies on the refolding of the reduced-denatured insulin with size exclusion chromatography

The refolding of the reduced-denatured insulin from bovine pancreas was investigated with the size exclusion chromatography (SEC). It was shown that the reduced-denatured insulin originally denatured with 7.0 mol·L-1 guanidine hydrochloride (GuHCI) or 8.0 mol·L-1 urea could not be refolded with a non-oxidized mobile phase. Although the oxidized and reduced glutathione (GSSG and GSH) were employed in the oxidized mobile phase, the reduced-denatured insulin still could not be renatured. However, in the presence of 2.0 mol·L-1 urea in the oxidized mobile phase employed, the reduced-denatured insulin can be refolded with SEC, and the aggregation of denatured insulin can be diminished by urea. In addition, the disul-fide exchange of reduced-denatured insulin also can be accelerated with GSSG/GSH in the oxidized mobile phase. The three disulfide bridges of insulin were formed correctly and the reduced-unfolded insulin can be renatured completely. The results were further tested with re-versed-phase liquid chromatography (RPLC) and hydrophobic interaction chromatography (HIC).     

Integrated Antimicrobial and Nonfouling Zwitterionic Polymers

Zwitterionic polymers are generally viewed as a new class of nonfouling materials. Unlike their poly(ethylene glycol) (PEG) counterparts, zwitterionic polymers have a broader chemical diversity and greater freedom for molecular design. In this Minireview, we highlight recent microbiological applications of zwitterionic polymers and their derivatives, with an emphasis on several unique molecular strategies to integrate antimicrobial and nonfouling properties. We will also discuss our insights into the bacterial nonfouling performance of zwitterionic polymers and one example of engineering zwitterionic polymer derivatives for antimicrobial wound‐dressing applications.     

A Simple Protocol to Stabilize Gold Nanoparticles using Amphiphilic Block Copolymers: Stability Studies and Viable Cellular Uptake

Di‐ and triblock non‐ionic copolymers based on poly(ethylene oxide) and poly(propylene oxide) were studied for the stabilization of nanoparticles in water at high ionic strength. The effect of the molecular architecture (di‐ vs. triblock) of these amphiphilic copolymers was investigated by using gold nanoparticles (AuNPs) as probes for colloidal stability. The results demonstrate that both di‐ and triblock copolymers can provide long term stability, and that in both cases AuNPs are individually embedded within globules of polymers. However, in the case of diblock copolymers, the colloidal stability was related to the formation of micelles, in contrast with the case of triblock copolymers, which were previously shown to provide good stability even at concentrations at which micelles do not form. Quartz crystal microbalance (QCM) experiments showed that the presence of the hydrophobic block in the structure of the polymer is important to ensure quantitative adsorption upon a gold surface and to limit desorption. We demonstrate that with an appropriate choice of polymer, the polymer/AuNP hybrids can also undergo filtration and freeze‐drying without noticeable aggregation, which can be very convenient for further applications. Finally, preliminary studies of the cytotoxicity effect on fibroblast cells show that the polymer/AuNP hybrids were not cytotoxic. TEM micrographs on ultrathin sections of cells after incubation with the colloidal solutions show that the nanoparticles were internalized into the cells, conserving their initial size and shape.     

Preparation of novel acrylamide‐based thermoresponsive polymer analogues and their application as thermoresponsive chromatographic matrices

New thermoresponsive polymers based on poly(N‐(N′‐alkylcarbamido)propyl methacrylamide) analogues were designed with increased hydrophobic content to facilitate temperature‐dependent chromatographic separations of peptides and proteins from aqueous mobile phases. These polymer solution exhibited a lower critical solution temperature (LCST) when the alkyl group is methyl, ethyl, isopropyl, propyl, butyl, and isobutyl. However, larger alkyl groups such as hexyl and phenyl were not soluble in aqueous solutions at any temperature. Phase transition temperatures were lower for larger alkyl groups and increased with decreasing polymer molecular weight and concentration in solution. LCST dependence on polymer molecular weight and concentration is more significant compared with well‐studied poly(N‐isopropylacrylamide) (PIPAAm). Partition coefficient (log P) values for N‐(N′‐butylcarbamide)propylmethacrylamide and N‐(N′‐isobutylcarbamide)propyl methacrylamide (iBuCPMA) monomers are larger than that for IPAAm monomer, suggesting higher hydrophobicity than IPAAm. Chromatographic evaluation of poly(N‐(N′‐isobutylcarbamide)propyl methacrylamide) (PiBuCPMA) grafted silica particles in aqueous separations revealed larger k′ values for peptides, insulin, insulin chain B, and angiotensin I than PIPAAm‐grafted silica beads. In particular, k′ values for insulin obtained from PiBuCPMA‐grafted silica separations were much larger than those from PIPAAm‐grafted surface separations, indicating that PiBuCPMA should be more hydrophobic than PIPAAm. These results support the introduction of alkylcarbamido groups to efficiently increase thermoresponsive polymer hydrophobicity of poly(N‐alkylacrylamides) and poly(N‐alkylmethacrylamides). Consequently, poly(N‐(N′‐alkylcarbamido)propyl methacrylamide) analogues such as PiBuCPMA and poly(N‐(N′‐alkylcarbamido)alkylmehacrylamide) are new thermoresponsive polymers with appropriate hydrophobic partitioning properties for protein and peptide separations in aqueous media, depending on selection of their alkyl groups. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5471–5482, 2008     

De novo refolding and aggregation of insulin in a nonaqueous environment: an inside out protein remake

While thermodynamic penalties associated with protein-water interactions are the key driving force of folding, perturbed hydration of destabilized protein molecules may trigger aggregation, which in vivo often causes cellular and histological damage. Here we show, that the denatured state of an alpha-helical protein, insulin, converts to a non-native beta-sheet-rich structure upon de novo "refolding" in an anhydrous environment. The beta-pleated conformer precipitates from solutions of DMSO-denatured insulin upon dilution with chloroform. DMSO destroys hydrogen bond network of the native protein acting as a strong acceptor of main chain hydrogen bonds. Upon the addition of chloroform, which is a weak hydrogen bond donor per se, competitive hydrogen bonds between DMSO and chloroform are formed. This leads to the release of unfolded insulin molecules. In the absence of water, the imminent saturation of polypeptide's dandling hydrogen bonds does not produce the native and predominantly alpha-helical state but a beta-sheet-rich structure, which is morphologically and spectrally distinct from insulin amyloid fibrils. Unlike insulin fibrils, the beta-sheet conformer is metastable and refolds spontaneously to the native form in an aqueous environment. This implies that "folding" in the absence of water results in inefficient burial of hydrophobic side-chains, and thermodynamic frustration at the water-protein interface.     

Refolding of Aggregation‐Prone ScFv Antibody Fragments Assisted by Hydrophobically Modified Poly(sodium acrylate) Derivatives

ScFv antibody fragments are a promising alternative to full‐length antibodies for both therapeutic and diagnosis applications. They can be overexpressed in bacteria, which enables easy large scale production. Since scFv are artificial constructs, they are poorly soluble and prone to aggregation, which makes them difficult to manipulate and to refold. Here, stabilization and refolding of scFv fragments from urea‐unfolded solutions are reported based on the use of micromolar amounts of polymers playing the role of artificial chaperons. Using fluorescence correlation spectroscopy, the size and aggregation number of complexes of scFv with unmodified or hydrophobically modified poly(sodium acrylate) are determined. The evolution of the secondary structure along the refolding procedure, in the presence or absence of 0.4 m l‐ arginine at scFv:polymer < 1:5 (w/w), is determined by high‐sensitivity synchrotron‐radiation circular dichroism. Measurements reveal that refolding in the presence of polymers yields native‐like secondary structure, though a different folding pathway can be followed compared to refolding in the absence of polymer. This is the first report on the use of macromolecular additives to assist refolding of a multidomain protein of therapeutic interest.

     

原位探测防污高分子材料与液体界面的分子结构

Marine organisms such as plants, algae or small animals can adhere to surfaces of materials that are submerged in ocean. The accumulation of these organisms on surfaces is a marine biofouling process that has considerable adverse effects. Marine biofouling on ship hulls can cause severe fuel consumption increase. Investigations on antifouling polymers are therefore becoming important research topics for marine vessel operations. Antifouling polymers can be applied as coating layers on the ship hull, protecting it against the settlement and growth of sea organisms. Polyethylene glycol (PEG) is a hydrophilic polymer that can effectively resist the accumulation of marine organisms. PEG-based antifouling coatings have therefore been extensively researched and developed. However, the inferior stability of PEG makes it subject to degradation, rendering it ineffective for long-term services. Zwitterionic polymers have also emerged as promising antifouling materials in recent years. These polymers consist of both positively charged and negatively charged functional groups. Various zwitterionic polymers have been demonstrated to exhibit exceptional antifouling properties. Previously, surface characterizations of zwitterionic polymers have revealed that strong surface hydration is critical for their antifouling properties. In addition to these hydrophilic polymers, amphiphilic materials have also been developed as potential antifouling coatings. Both hydrophobic and hydrophilic functional groups are incorporated into the backbones or sidechains of these polymers. It has been demonstrated that the antifouling performance can be enhanced by precisely controlling the sequence of the hydrophobic-hydrophilic functionalities. Since biofouling generally occurs at the outer surface of the coatings, the antifouling properties of these coatings are closely related to their surface characteristics in water. Therefore, understanding of the surface molecular structures of antifouling materials is imperative for their future developments. In this review, we will summarize our recent advancements of antifouling material surface analysis using sum frequency generation (SFG) vibrational spectroscopy. SFG is a surface-sensitive technique which can provide molecular information of water and polymer structures at interfaces in situ in real time. The antifouling polymers we will review include zwitterionic polymer brushes, mixed charged polymers, and amphiphilic polypeptoids. Interfacial hydration studies of these polymers by SFG will be presented. The salt effect on antifouling polymer surface hydration will also be discussed. In addition, the interactions between antifouling materials and protein molecules as well as algae will be reviewed. The above research clearly established strong correlations between strong surface hydration and good antifouling properties. It also demonstrated that SFG is a powerful technique to provide molecular level understanding of polymer antifouling mechanisms.     

Protecting enzymes against heat inactivation by temperature-sensitive polymer in confined space

At high temperature, many enzymes are inactivated by aggregations at hydrophobic sites which are exposed on denaturation. Isolating denatured enzymes via hydrophobic interactions with other material is a significant method to prevent enzymes from aggregation. But the temperature-sensitive polymer poly(N-isopropylacrylamide) (PNIPAAm), supposed to protect enzymes spontaneously at high temperatures, can not efficiently complex denatured carbonic anhydrase B (CAB, as a model enzyme) in bulk aqueous solution due to different phase transition speeds. Here, we present a novel method for protecting enzymes against heat inactivation, in which PNIPAAm and CAB are encapsulated in a confined space constructed by reverse microemulsion. At high temperatures, PNIPAAm forms nanoscale aggregates possessing both large specific surface areas and hydrophobic surfaces, and then adsorbs denatured CAB via hydrophobic interactions to avoid intermolecular aggregation of CAB. With cooling, CAB is released spontaneously and recovers its activity. The assays for enzymatic activity demonstrate that CAB is effectively protected against heat inactivation through this method (protection efficiency is up to 83.2%).     

Reversible electrochemical switching of polymer brushes grafted onto conducting polymer films

We demonstrate the electrochemical switching of conformation of surface-bound polymer brushes, by grafting environmentally sensitive polymer brushes from an electrochemically active conducting polymer (ECP). Using atom transfer radical polymerization (ATRP), we grafted zwitterionic betaine homopolymer and block copolymer brushes of poly(3-(methacryloylamido)propyl)-N,N'-dimethyl(3-sulfopropyl)ammonium hydroxide) (PMPDSAH) and poly(methyl methacrylate)-b-PMPDSAH, from an initiator, surface-coupled to a poly(pyrrole-co-pyrrolyl butyric acid) film. The changes in ionic solution composition in the surface layer, resulting from oxidation and reduction of the ECP, trigger a switch in conformation of the surface-bound polymer brushes, demonstrated here by electrochemical impedance spectroscopy (EIS) and in a change of wettability. The switch is dependent upon temperature in a way that is analogous to the temperature-dependent solubility and aggregation of similar betaine polymers in aqueous solution but has a quite different dependence on salt concentration in solution. The switch is fully reversible and reproducible. We interpret the switching behavior in terms of a transition to a "supercollapsed" state on the surface that is controlled by ions that balance the charge state of the ECP and are adsorbed to the opposite charges of the zwitterionic graft, close to the graft-ECP interface. The behavior is significantly modified by hydrophobic interactions of the block copolymer graft. We speculate that the synergistic combination of properties embodied in these "smart" materials may find applications in electrochemical control of surface wetting and in the interaction with biomolecules and living cells.     

Temperature‐Responsive Mixed‐Shell Polymeric Micelles for the Refolding of Thermally Denatured Proteins

We have fabricated a mixed‐shell polymeric micelle (MSPM) that closely mimics the natural molecular chaperone GroEL? GroES complex in terms of structure and functionality. This MSPM, which possesses a shared PLA core and a homogeneously mixed PEG and PNIAPM shell, is constructed through the co‐assembly of block copolymers poly(lactide‐b‐poly(ethylene oxide) (PLA‐b‐PEG) and poly(lactide)‐b‐poly(N‐isopropylacryamide) (PLA‐b‐PNIPAM). Above the lower critical solution temperature (LCST) of PNIPAM, the MSPM evolves into a core–shell–corona micelle (CSCM), as a functional state with hydrophobic PNIPAM domains on its surface. Light scattering (LS), TEM, and fluorescence and circular dichroism (CD) spectroscopy were performed to investigate the working mechanism of the chaperone‐like behavior of this system. Unfolded protein intermediates are captured by the hydrophobic PNIPAM domains of the CSCM, which prevent harmful protein aggregation. During cooling, PNIPAM reverts into its hydrophilic state, thereby inducing the release of the bound unfolded proteins. The refolding process of the released proteins is spontaneously accomplished by the presence of PEG in the mixed shell. Carbonic anhydrase B (CAB) was chosen as a model to investigate the refolding efficiency of the released proteins. In the presence of MSPM, almost 93 % CAB activity was recovered during cooling after complete denaturation at 70 °C. Further results reveal that this MSPM also works with a wide spectrum of proteins with more‐complicated structures, including some multimeric proteins. Given the convenience and generality in preventing the thermal aggregation of proteins, this MSPM‐based chaperone might be useful for preventing the toxic aggregation of misfolded proteins in some diseases.     

Multicomponent Tandem Polymerization of Aromatic Alkynes,Carbonyl Chloride,and Fischer's Base toward Poly(diene merocyanine)s

Multicomponent polymerization (MCP) is a popular tool to construct polymers with diverse structure, simple operation, and high efficiency, which faces the challenges of limited product structures. Multicomponent tandem polymerization (MCTP), combining two or multiple reactions in a one‐pot fashion, could expand the scope of MCP and enrich the polymer structures. Herein, a one‐pot three‐component tandem polymerization of diynes, carbonyl chloride, and Fischer's base has been developed to afford conjugated poly(diene merocyanine)s with mild condition, satisfactory molecular weights (M_w up to 10900 g/mol) and yields (up to 81%). The polymers enjoy good solubility and high thermal stability. The unique emission behavior of the model compound and polymer show that they are aggregation‐induced emission (AIE)‐active, suggesting that the diene merocyanine moiety is a potential AIEgen. This MCTP shows great potential in the preparation of functional polymer materials, which could build new AIE functional units directly from the polymerization, demonstrating its synthetic simplicity and elegance.     

Transport properties of small molecules in zwitterionic polymers

Despite great interests in using zwitterionic polymers for membrane surface modification to enhance antifouling properties, there lacks fundamental understanding of the relationship between polymer structure and water/salt separation properties. In this study, two series of zwitterionic polymers were prepared from sulfobetaine methacrylate and 2‐methacryloyloxyethyl phosphorylcholine. Both are crosslinked by poly(ethylene glycol) diacrylate (PEGDA). These copolymers were thoroughly characterized in terms of sol‐gel fraction, density, glass transition temperature, contact angle, water and salt transport properties, and pure‐gas permeability. Interestingly, the zwitterionic polymers exhibit water sorption and permeability similar to noncharged poly(ethylene glycol)‐based materials. These zwitterionic polymers exhibit lower NaCl diffusivity and permeability and thus higher water/NaCl selectivity than the non‐charged PEG‐based materials at similar water volume fractions, demonstrating their promise for membrane surface modification for desalination and wastewater treatment. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1924–1934     

聚乙二醇-聚磷酸酯嵌段共聚物的合成与性质以及对紫杉醇增溶作用的研究

合成了一系列甲氧基聚乙二醇(MPEG)和聚(2-甲氧基乙基亚乙基磷酸酯)(PMOEEP)的两嵌段聚合物MPEG-b-PMOEEP,并研究了该嵌段聚合物对疏水性化疗药物紫杉醇(PTX)的增溶效果.以MPEG为引发剂、异辛酸亚锡为催化剂,对五元环状磷酸酯单体2-甲氧基乙氧基-1,3,2-二氧磷杂环戊烷(MOEEP)进行开环...