Zeolitic imidazolate frameworks‐8 modified graphene as a green flame retardant for reducing the fire risk of epoxy resin

A novel hybrid material of ZIF‐8/RGO (zeolitic imidazolate frameworks‐8 loaded the surface of graphene) was synthesised by a simple method and characterized. Then, ZIF‐8/RGO was added into epoxy resin (EP), and the flame retardancy and smoke suppression of the EP composites were studied. Compared with pure EP, the peak heat release rate and the total heat release of the EP composites were reduced remarkably, and their LOI and UL94 vertical burning rating were also improved. In addition, their smoke production rate and total smoke production were decreased drastically. The improved flame retardancy and smoke suppression were mainly attributed to the physical barrier effect of graphene. Meanwhile, the metal oxide decomposed from ZIF‐8 could contribute to the production of char residue and enhance the compactness of the char layer.     

Polyaniline‐coupled graphene/nickel hydroxide nanohybrids as flame retardant and smoke suppressant for epoxy composites

Graphene‐polyaniline/nickel hydroxide ternary hybrid (RGO‐PANI/Ni(OH)₂) was synthesized and incorporated into epoxy resin (EP) to improve the fire retardant property. Thermogravimetric analysis results showed that the RGO‐PANI/Ni(OH)₂ nanohybrid could catalyze the thermal degradation of epoxy matrix that was essential to trigger the char formation. The char yield of the RGO‐PANI/Ni(OH)₂/EP composite was improved compared with that of the samples with graphene and polyaniline only. With 3.0‐wt% RGO‐PANI/Ni(OH)₂, significant reduction in peak heat release rate (40%) and peak smoke production rate (36%) was observed in the cone calorimeter tests. Thermogravimetric analysis/infrared spectrometry (TG‐IR) results indicated that the flammable volatiles of the RGO‐PANI/Ni(OH)₂/EP composite was reduced compared with those of the EP and RGO‐PANI/EP. The superior flame retardant and smoke suppressant behaviors of the RGO‐PANI/Ni(OH)₂ nanohybrid over RGO‐PANI were attributed to the combination of good barrier effect of graphene with catalytic ability of char formation of PANI and metal hydroxide.     

A combination of POSS and polyphosphazene for reducing fire hazards of epoxy resin

Extensive application of epoxy resins (EPs) is highly limited by their intrinsic flammability. Combining EPs with nanoparticles and phosphorus‐nitrogen flame retardants is an effective approach to overcome the drawback. In this work, simultaneous incorporation of octa‐aminophenyl polyhedral oligomeric silsesquioxanes (OapPOSS) and polyphosphazene into EP was reported for the first time. Significantly, reduced peak of heat release rate and UL‐94 V‐0 rating were achieved by tuning suitable ratios of polyphosphazene and OapPOSS for EP composites. During combustion, polyphosphazene promoted char formation and released nonflammable gases such as CO₂, NH₃, and N₂ to dilute oxygen concentration and cool pyrolysis zone. Moreover, numerous phosphorus‐containing species acting as free radical scavengers were generated during degradation. Silicon dioxide evolving from OapPOSS protected char residues from thermal degradation. This study provides a novel method to fabricate high‐performance flame‐retardant EP composites, which have potential applications in the field of electrics and electronics.     

A novel intumescent flame retardant imparts high flame retardancy to epoxy resin

Intumescent flame retardant (IFR) has received the considerable attention ascribed to the inherent advantages including non‐halogen, low toxicity, low smoke release and environmentally friendly. In this work, a novel charring agent poly (piperazine phenylaminophosphamide) named as PPTA was successfully synthesized and characterized by Fourier transform infrared spectra (FTIR) and X‐ray photoelectron spectroscopy (XPS). Then, a series of flame‐retardant EP samples were prepared by blending with ammonium polyphosphate (APP) and PPTA. Combustion tests include oxygen Index (LOI), vertical Burning Test (UL‐94) and cone calorimeter testing,these test results showed that PPTA greatly enhances the flame retardancy of EP/APP. According to detailed results, EP containing 10 wt% APP had a LOI value of 30.2%,but had no enhancement on UL‐94 rating. However, after both 7.5 wt% APP and 2.5 wt% PPTA were added, EP‐7 passed UL‐94 V‐0 rating with a LOI value of 33.0%. Moreover, the peak heat release rate (PHRR) and peak of smoke product rate (PSPR) of EP‐7 were greatly decreased. Meanwhile, the flame‐retardant mechanism of EP‐7 was investigated by scanning electron microscopy (SEM), thermogravimetric analysis/infrared spectrometry (TG‐IR) and X‐ray photoelectron spectroscopy (XPS). The corresponding results presented PPTA significantly increased the density of char layer, resulting in the good flame retardancy.     

A novel nitrogen,phosphorus, and boron ionic pair compound toward fire safety and mechanical enhancement effect for epoxy resin

In this work, a novel nitrogen, phosphorus and boron ionic pair compound (DTPA[AZB]), composed of a protonated flame retardant (DTPA) 6,6'‐(1,4‐phenylenebis((pyrazin‐2‐ylamino)methylene))bis(dibenzo[c,e][1,2]oxaphosphinine 6‐oxide) and a counter anion alizarin borate (AZB), has been prepared and fully characterized, AZB was synthesized by the reaction of alizarin with boric acid. DTPA was produced in two steps. First, terephthalaldehyde was condensed with aminopyrazine to form the corresponding imine. This was treated with 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) to generate DTPA. Blending with DTPA greatly reduced the flammability of epoxy resin. When the amount of DTPA added was 4%, a modified epoxy resin passed the V‐0 rating and the limiting oxygen index (LOI) reached 32.5%. With the introduction of 3% AZB into the EP/DTPA material, the LOI reached 33.5%. Simultaneously, compared with that of neat EP, the peak heat release rate and smoke production rate for EP/DTPA‐4 was decreased by 24.1% and 40.7%, respectively, and the peak heat release rate and smoke production rate for EP/DTPA[AZB]‐3 was decreased by 32.9% and 43.4%, respectively. The results indicate that AZB and DTPA show good cooperative flame retardant effects. The flame retardancy of the modified epoxy is improved with greater heat release suppression combustion of the resin. A mode of flame retardant action has been proposed based on analysis results from Py‐GC/MS for DTPA, and SEM, IR and Raman for the residual carbon from cone calorimeter and UL‐94 tests, respectively. Importantly, the tensile strength, fexural strength, and fexural modulus of the EP/DTPA[AZB] increased compared with the same properties of neat EP.     

Interfacial structure and tribological behaviours of epoxy resin coating reinforced with graphene and graphene oxide

Graphene (G) and graphene oxide (GO) were added into epoxy resin (EP) respectively via chemical modification and physical ultrasound technology to improve the tribological behaviour of EP coating. The topographies of G and GO were detected by scanning probe microscopy. The chemical structures of the fillers before and after modification were identified by Fourier transform infrared spectrometer. The across‐section topographies of the coatings were detected by scanning electron microscopy. The tribological behaviour of the coatings was evaluated by UMT‐3 tribology tester, surface profiler and scanning electron microscopy. The results revealed that the coefficient of friction of the coatings decreased, and the wear resistance of the coatings improved with the addition of the G and GO. GO could improve the tribological performance of EP further compared to G. When containing 0.5 wt% G and 0.75 wt% GO, the coatings had the lowest coefficient of friction and best wear resistance. When the contents of G reached 0.75 wt%, and GO reached 1 wt%, the tribological performance of the composite coatings decreased as a result of the agglomeration of the fillers. Finally, the anti‐friction and anti‐wear mechanisms of G‐EP and GO‐EP composite coatings were discussed in detail based on the results obtained in the preceding texts. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis of bio‐based poly (cyclotriphosphazene‐resveratrol) microspheres acting as both flame retardant and reinforcing agent to epoxy resin

A highly cross‐linked poly (cyclotriphosphazene‐resveratrol) microsphere (PRV) was synthesized by using hexachlorocyclotriphosphazene (HCCP) and bio‐based resveratrol (REV) as raw materials, and the obtained PRV microspheres were applied to improve the flame retardancy and mechanical property of epoxy resin (EP). The TGA results showed that the PRV microsphere is an excellent charring agent and the char yield is as high as 62% at 800°C. The incorporation of PRV makes the initial degradation earlier yet significantly increases the char residue of EP composites. Moreover, the introduction of PRV microspheres into EP greatly promoted the flame retardancy performance. Under 3% of addition of PRV microspheres, the peak heat release rate (PHRR) and total heat release (THR) were decreased by 58.3% and 29.6%, respectively, the limited oxygen index (LOI) value was increased to 29.7% from 25.3% of pure EP. In addition, because of the uniform distribution in EP matrix and the enhancing effect of PRV microspheres, the mechanical properties including tensile modulus of EP composites were strengthened. PRV microspheres in this paper provide a possibility to synthesize a dual functional filler, which acts as both flame retardant and strengthening agent.     

Flame‐retardant epoxy resin compounds containing novolac derivatives with aromatic compounds

New flame‐retardant epoxy resin compounds containing novolac derivatives with specific aromatic compounds have been developed. After crosslinking reactions between epoxy resin and hardener, the epoxy resin compounds formed highly flame‐retardant network structures that were obtained by including biphenylene and phenylene moieties in the main chains of novolac‐type epoxy resin and phenol novolac resin hardener. The high flame retardancy is due mainly to the stable foam layers that form during combustion because of the low elasticity at high temperatures and the high pyrolysis resistance of the compounds. Furthermore, the addition of excess phenol derivative hardener not only facilitates the formation of the foam layers by decreasing the crosslink densities but also reduces the amount of flammable substances generated from the epoxy resin compounds during combustion. The use of a multifunctional epoxy resin containing four glycidyloxy groups in the compounds improved characteristics such as heat resistance and strength at high temperatures, while maintaining excellent flame retardancy. Copyright © 2001 John Wiley & Sons, Ltd.     

Preparation and characterization of microencapsulated LDHs with melamine‐formaldehyde resin and its flame retardant application in epoxy resin

Layered double hydroxides (LDHs) are emerging as a new and green high‐efficient flame retardant. But LDHs aggregate seriously because of their hydrophilicity, which affect deeply the mechanical and flame retardant properties of their composites. For the first time in this paper, microencapsulated LDHs (MCLDHs) with melamine‐formaldehyde (MF) resin were prepared by microencapsulation technology to enhance their compatibility and dispersion within epoxy resin (EP). The mechanical and flame retardant performances of EP/MCLDH composite were studied by comparing with EP/LDH composite. Results showed that the water contact angle of MCLDHs increased from 8.9° to 122.1°, which indicated good compatibility. The particle size of MCLDHs decreased sharply, and more than one‐third were up to submicron scale, which can be conducive to dispersion. Moreover, the tensile strength and elongation at break of EP/MCLDHs with different flame retardant contents were higher than those of EP/LDHs. And the addition of MCLDHs increased the glass transition temperature (Tg) of EP/MCLDHs, which meant a strong interfacial interaction. Besides, compared with EP/LDHs, the limiting oxygen index values of EP/MCLDHs were higher, and its peak of heat release rate and total heat release decreased by 16.3% and 5.5% respectively. EP/MCLDHs achieved from V‐1 to V‐0 rate with the increasing content of MCLDHs from 20% to 30%, while LDHs/EP never passed tests. In the process of heating, H₂O, CO₂, and NH₃ released from MCLDHs formed gaseous phase, and the remaining dense char layers and oxides produced condensed phase, which played an important role in inhibiting combustion.     

Preparation and characterization of phosphorus‐containing Mannich‐type bases as curing agents for epoxy resin

Two novel phosphorus‐containing Mannich‐type bases, [(2‐{[(diethoxy‐phosphoryl)‐phenyl‐methyl]‐amino}‐ ethylamino)‐phenyl‐methyl]‐phosphonic acid diethyl ester (PEDA) and ({2‐[2‐(2‐{[(diethoxy‐phosphoryl)‐phenyl‐methyl]– amino}‐ethylamino)‐ethylamino]‐ethylamino}‐phenyl‐methyl)‐phosphonic acid diethyl ester (PTTA) were prepared and employed as curing agents in an attempt to prepare flame retardant epoxy systems. Through a curing reaction, phosphorus was incorporated in the backbone of the epoxy polymer. The processing characteristic of these systems was studied in terms of gel time at different temperatures. Thermal and flame retardancy properties of the cured epoxy thermosets were characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and flammability test. The degradation activation energy was calculated by Kissinger's model. The results showed that the gel time of the phosphorus‐containing epoxy systems was prolonged; the glass transition temperature (T_g) was increased due to the introduction of phosphorus and the initial degradation activation energy of phosphorus‐containing epoxy systems was lower than phosphorus‐free epoxy systems. High char yield (23–27 wt%) and limiting oxygen index (LOI) values of 28–30 were observed for the phosphorus‐containing epoxy thermosets, indicating their improvement in flame retardancy. Copyright © 2008 John Wiley & Sons, Ltd.     

Reinforcing epoxy resin through covalent integration of functionalized graphene nanosheets

A chemically converted graphene/epoxy (EP) resin nanocomposite has been developed through the use of the functionalized graphene nanosheets (FGNs). The FGNs were prepared via the reaction of amines with alkylcarboxyl groups attached to the graphite oxides in the course of a dicarboxylic acid acyl peroxide treatment. FGNs/EP composites were prepared by dissolving the FGNs in organic solvent followed by mixing with EP and curing agent. In this composite, the FGNs were able to create molecular entanglement with EP matrix by taking advantage of the reactions between amine groups of FGNs and EP groups of EP, thus the FGNs could be covalently integrated into the EP matrix and became part of the cross‐linked network structure rather than just a separated component. Great enhancement in the mechanical properties of the epoxy composite, such as the ultimate tensile strength and toughness, had been achieved with small loading (0.1 wt%) of FGNs by 17.0% and 262.2%, respectively. However, the FGNs reinforced EP composites showed a slight decrease in glass transition temperature (Tg). Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and properties of phosphorus-containing bio-based epoxy resin from itaconic acid

A phosphorus-containing bio-based epoxy resin (EADI) was synthesized from itaconic acid (IA) and 9,10-dihydro-9-oxa-10-phosphaphenanthrene 10-oxide (DOPO). As a matrix, its cured epoxy network with methyl hexahydrophthalic anhydride (MHHPA) as the curing agent showed comparable glass-transition temperature and mechanical properties to diglycidyl ether in a bisphenol A (DGEBA) system as well as good flame retardancy with UL94 V-0 grade during a vertical burning test. As a reactive flame retardant, its flame-resistant effect on DGEBA/MHHPA system as well as its influence on the curing behavior and the thermal and mechanical properties of the modified epoxy resin were investigated. Results showed that after the introduction of EADI, not only were the flame retardancy determined by vertical burning test, LOI measurement, and thermogravimetric analysis significantly improved, but also the curing reactivity, glass transition temperature (T _g), initial degradation temperature for 5% weight loss (T _d(5%)), and flexural modulus of the cured system improved as well. EADI has great potential to be used as a green flame retardant in epoxy resin systems.     

Flame retardancy of fibre-reinforced epoxy resin composites for aerospace applications

The applicability of phosphorus-containing reactive amine, which can be used in epoxy resins both as crosslinking agent and as flame retardant, was compared in an aliphatic and an aromatic epoxy resin system. In order to fulfil the strong requirements on mechanical properties of the aircraft and aerospace applications, where they are mostly supposed to be applied, carbon fibre-reinforced composites were prepared. The flame retardant performance was characterized by relevant tests and mass loss type cone calorimeter. Besides the flame retardancy, the tensile and bending characteristics and interlaminar shear strength were evaluated. The intumescence-hindering effect of the fibre reinforcement was overcome by forming a multilayer composite, consisting of reference composite core and intumescent epoxy resin coating layer, which proved to provide simultaneous amelioration of flame retardancy and mechanical properties of epoxy resins.     

Preparation of graphene oxide modified glass fibers and their application in flame retardant polyamide 6

In order to improve the flame retardancy of glass fibers (GFs) reinforced polyamide 6 (PA6) composites and eliminate the “wicking effect,” the preparation and application of graphene oxide (GO) modified GFs were investigated in this work. Flame retardant PA6 was prepared by blending graphene oxide modified GFs reinforced PA6 and aluminum diethyl phosphonate. For the GFs reinforced PA6, the limiting oxygen index of the composite increased from 20.6% to 22.3%, and peak heat release rate decreased by 37.2% in cone calorimeter test via introducing graphene oxide onto the surface of GFs. Comparing PA6/GF30/ADP15 and PA6/GF‐GO30/ADP15, LOI of the later increased to 31.2%, the vertical burning test (UL‐94) reached V‐0, and the peak heat release rate decreased by 18.0%. The interface compatibility was greatly improved after the introduction of GO. The sheet structure of the GO on the GFs surface could block the combustible gas spillage and the flow of melt along the GFs, thus significantly attenuating the “wicking effect” and improving the flame retardancy of composites.     

Nanomorphology and fire behavior of polystyrene/organoclay nanocomposites containing brominated epoxy and antimony oxide

Organoclay nanocomposites were prepared by ultrasound‐assisted solution intercalation technique based on polystyrene containing brominated epoxy and a combination of brominated epoxy and antimony oxide. Aspects of nanomorphology and nanodispersion were investigated by X‐ray diffraction and transmission electron microscopy whereas flammability and reaction to fire were evaluated using limiting oxygen index, UL‐94, and mass loss calorimeter tests. Polystyrene/brominated‐epoxy‐blend‐based nanocomposites showed mixed intercalated–exfoliated nanomorphology where polymer‐intercalated crystallites predominantly exist in polystyrene matrix and exfoliated silicate layers reside on polystyrene/brominated epoxy phase boundaries and within brominated epoxy domains. Organoclay was found to impart a compatibilization effect on polystyrene and dispersed brominated epoxy, which facilitates uniform distribution of a fine flame‐retarding phase within the matrix. With the reduction of the rate at which decomposition products evolve into the gas phase, organoclay nanocomposites showed notable reductions in peak heat release rate and increases in limiting oxygen index. The gas‐phase hot radical entrapment by halogenated flame‐retardant system was coupled with the condensed‐phase physical action of nanodispersed organoclay, which increased the overall fire‐retardant effectiveness. Fire‐retardant mechanisms of nanocomposites based on polystyrene/brominated epoxy blends were attributed to nanoconfinement and tortuous pathway effects of organoclay rather than to carbonaceous char formation proposed earlier for polystyrene/organoclay systems without conventional flame retardants. Copyright © 2011 John Wiley & Sons, Ltd.     

Thermal properties and flame retardancy of novel epoxy based on phosphorus‐modified Schiff‐base

Through addition reaction of Schiff‐base terephthalylidene‐bis‐(p‐aminophenol) ( DP‐1 ) and diethyl phosphite (DEP), a novel phosphorus‐modified epoxy, 4,4'‐diglycidyl‐(terephthalylidene‐bis‐(p‐aminophenol))diphosphonate ether ( EP‐2 ), was obtained. An modification reaction between EP‐2 and DP‐1 resulted in an epoxy compound, EP‐3 , possessing both phosphonate groups and C?N imine groups. The structure of EP‐2 was characterized by Fourier transform infrared (FTIR), elemental analysis (EA), ¹H, ¹³C, and ³¹P NMR analyses. The thermal properties of phosphorus‐modified epoxies cured with 4,4'‐diaminodiphenylmethane (MDA) and 4,4'‐diaminodiphenyl ether (DDE) were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The activation energies of dynamic thermal degradation (E_d) were calculated using Kissinger and Ozawa's methods. The thermal degradation mechanism was characterized using thermogravimetric analysis/infrared spectrometry (TG‐IR). In addition, the flame retardancy of phosphorus‐modified epoxy thermosets was evaluated using limiting oxygen index (LOI) and UL‐94 vertical test methods. Via an ingenious design, phosphonate groups were successfully introduced into the backbone of the epoxies; the flame retardancy of phosphorus‐modified epoxy thermosets was distinctly improved. Due to incorporation of C?N imine group, the phosphorus‐modified epoxy thermosets exhibited high thermal stabilities; the values of glass‐transition temperatures (T_gs) were about 201–210°C, the values of E_d were about 220–490 kJ/mol and char yields at 700°C were 49–53% in nitrogen and 45–50% in air. These results showed an improvement in the thermal properties of phosphorus‐modified epoxy by the incorporation of C?N imine groups. Copyright © 2010 John Wiley & Sons, Ltd.     

Influence of zinc stannate and graphene hybrids on reducing the toxic gases and fire hazards during epoxy resin combustion

Spinel zinc stannate (Zn₂SnO₄, ZS) was successfully synthesized by a simple hydrothermal route, and graphene(G) was used as the carrier to form graphene‐zinc stannate (G‐ZS) hybrids. The resulted G‐Zn₂SnO₄ (G‐ZS) was incorporated to epoxy resin for the purpose of reducing the toxicity hazards during combustion. Toxic gas analyzer results showed that the ZS hybrids possess high efficiency on reducing the generation of NOx, HCN, and CO. Cone calorimeter results of the G‐ZS/EP composites showed about 40% decrease on peak heat release rate compared with pristine EP which meant better fire performance. Also, TG‐IR technology was used to further investigate the gases release during the EP decomposition process. Particularly, the CO release had decreased about 80% than pure EP. This work constructs a new strategy to make a binary metal oxides system which would be efficient in reducing the toxic gases during polymer combustion. Besides, a proper bridge‐effect is proposed to illustrate the proper mechanism.     

Highly efficient multielement flame retardant for multifunctional epoxy resin with satisfactory thermal,flame‐retardant,and mechanical properties

Multifunctional epoxy resins with excellent, thermal, flame‐retardant, and mechanical properties are extremely important for various applications. To solve this challenging problem, a novel highly efficient multielement flame retardant (PMSBA) is synthesized and the flame‐retardant and mechanical properties of modified epoxy resins are greatly enhanced without significantly altering their and thermal properties by applying the as‐synthesized PMSBA. The limiting oxygen index value reaches up to 29.6% and could pass the V‐0 rating in the UL‐94 test with even low P content (0.13%). Furthermore, cone calorimetry results demonstrate that 30.3% reduction in the peak heat release rate for the sample with 10.0 wt% PMSBA is achieved. X‐ray photoelectron spectroscopy and scanning electron microscopy indicate that Si‐C, Si‐N, and phosphoric acid derivative can be transformed into a multihole and intumescent char layer as an effective barrier, preserving the epoxy resin structure from fire. More importantly, mechanical properties such as impact strength, tensile strength, and flexural strength are also increased by 63.86%, 33.54%, and 15.65%, respectively, which show the incorporation of PMSBA do not deteriorate the mechanical properties of modified epoxy resins. All the results show that PMSBA is a promising strategy for epoxy resin with satisfactory, thermal, flame‐retardant, and mechanical properties.     

Fabrication of diatomite‐based microencapsulated flame retardant and its improved fire safety of unsaturated polyester resin

To achive excellent fire resistance, new microcapsule flame retardants (DMCAD and DMPPD) were prepared using 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide combined with melamine cyanurate or melamine polyphosphate as the shell material and diatomite as the core material. The successful assembly of DMCAD and DMPPD was detailed characterized by Fourier transform infrared (FT‐IR) spectra, X‐ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). Meanwhile, the flame retardancy and thermal stability of the unsaturated polyester resin (UPR)/DMCAD and UPR/DMPPD composites were also studied. The addition of DMCAD and DMPPD effectively improves the flame retardance properties of UPR, and the effect of DMPPD was better. The limiting oxygen index (LOI) of UPR/DMPPD‐3 increased by 11.6% when compared with that of UPR, and the sample achieved V‐0 rating. Moreover, the peak heat release rate (pHRR) and the total heat release (THR) rate of UPR/DMPPD‐3 were reduced by 67% and 26%, respectively. Under nitrogen condition and air condition, UPR/DMPPD showed better thermal stability and char‐forming ability from the thermogravimetric (TG) results. Residual char of the UPR composites was systematically analyzed with SEM and XPS. Finally, the flame retardant mechanism of DMPPD was proposed.     

Water resistance,thermal stability,and flame retardation of polypropylene composites containing a novel ammonium polyphosphate microencapsulated by UV‐curable epoxy acrylate resin

In this work, ammonium polyphosphate (APP) was microencapsulated by UV‐curable epoxy acrylate (EA) resin. The resulting novel EA‐microencapsulated APP (EA‐APP) was characterized by Fourier transform infrared spectra, X‐ray photoelectron spectroscopy, X‐ray diffraction, scanning electron microscopy, granulometry, and thermogravimetric (TG) analysis. EA‐APP was used to flame retard polypropylene (PP). The water solubility of EA‐APP and the water resistance of PP/EA‐APP systems were investigated. The thermal stability and combustion behaviors of PP/EA‐APP composites were studied through TG and cone calorimeter (CC) tests, respectively. The water resistance test showed that the EA shell could significantly improve the water resistance of PP/APP. TG data illustrated that the char residue of EA‐APP greatly increased by 149% compared with uncoated APP, and the thermal stability of PP/EA‐APP composite was improved because of the microencapsulation of APP, with an increment of 248% for the char residue compared with PP/APP. CC test results indicated that the peak value of heat release rate, the total heat release, and the peak of smoke production rate of PP/EA‐APP decreased in comparison with PP/APP. The mechanism for the improvement of flame retardancy in CC test was discussed based on the experimental results. EA resin containing a large number of hydroxyl groups might promote the dehydration reaction in EA‐APP, which facilitated the formation of char residue and the stabilization of APP. Consequently, the flame‐retardant efficiency for APP was improved because of the presence of EA shell. Copyright © 2014 John Wiley & Sons, Ltd.