Chitosan based surfactant polymers designed to improve blood compatibility on biomaterials

We developed chitosan based surfactant polymers that could be used to modify the surface of existing biomaterials in order to improve their blood compatibility. These polymers consist of a chitosan backbone, PEG side chains to repel non-specific protein adsorption, and hexanal side chains to facilitate adsorption and proper orientation onto a hydrophobic substrate via hydrophobic interactions. Since chitosan is a polycationic polymer, and it is thrombogenic, the surface charge was altered to determine the role of this charge in the hemocompatibility of chitosan. Charge had a notable effect on platelet adhesion. The platelet adhesion was greatest on the positively charged surface, and decreased by almost 50% with the neutralization of this charge. A chitosan surface containing the negatively charged SO(3)(-) exhibited the fewest number of adherent platelets of all surfaces tested. Coagulation activation was not altered by the neutralization of the positive charge, but a marked increase of approximately 5-6 min in the plasma recalcification time (PRT) was displayed with the addition of the negatively charged species. Polyethylene (PE) surfaces were modified with the chitosan surfactant resulting in a significant improvement in blood compatibility, which correlated to the increasing PEG content within the polymer. Adsorption of the chitosan surfactants onto PE resulted in approximately an 85-96% decrease in the number of adherent platelets. The surfactant polymers also reduced surface induced coagulation activation, which was indicated by the PEG density dependent increase in PRTs. These results indicate that surface modification with our chitosan based surfactant polymers successfully improves blood compatibility. Moreover, the inclusion of either negatively charged SO(3)(-) groups or a high density of large water-soluble PEG side chains produces a surface that may be suitable for cardiovascular applications.     

Hydrophobically associating water‐soluble polymers; a dramatic growth of solution viscosity and the specificity of physical gel formation

The rheological properties of dilute and semidilute solutions (viscosity) and physical gels (elasticity modulus) of hydrophobically modified self‐associated binary polymers (formed by micellar polymerization of acrylamide and methyl methacrylate with side hydrophobic groups (HG) containing 9, 12 and 18 C‐atoms), and terpolymers (the same monomers and a charged component — sodium acrylate) are studied. The dependences of properties on the length, form (linear or branched) and the number of HG and charges is established. It is shown that a very small number of linear HG leads to a considerably higher solution viscosity, starting at a smaller concentration compared with the effects of a larger number of branched HG. Solutions of terpolymers of concentration 2–3 wt % form physical gels that are thixotropic. After dilution, the polymers suddenly form gels at certain concentrations without the preliminary stage of viscosity growth     

Adsorption of the fusogenic peptide B18 onto solid surfaces: insights into the mechanism of peptide assembly

The adsorption and assembly of B18 peptide on various solid surfaces were studied by reflectometry techniques and atomic force microscopy. B18 is the minimal membrane binding and fusogenic motif of the sea urchin protein bindin, which mediates the fertilization process. Silicon substrates were modified to obtain hydrophilic charged surfaces (oxide layer and polyelectrolyte multilayers) and hydrophobic surfaces (octadecyltrichlorosilane). B18 does not adsorb on hydrophilic positively charged surfaces, which was attributed to electrostatic repulsion since the peptide is positively charged. In contrast, the peptide irreversibly adsorbs on negatively charged hydrophilic as well as on hydrophobic surfaces. B18 showed higher affinity for hydrophobic surfaces than for hydrophilic negatively charged surfaces, which must be due to the presence of hydrophobic side chains at both ends of the molecule. Atomic force microscopy provided the indication that lateral diffusion on the surface affects the adsorption process of B18 on hydrophobic surfaces. The adsorption of the peptide on negatively charged surfaces was characterized by the formation of globular clusters.     

Gelation of spontaneously formed catanionic vesicles by water soluble polymers

The gelation of two spontaneously formed charged catanionic vesicles by four water soluble polymers was systematically studied by tube inversion method and rheology. Eight phase maps were successfully documented for the catanionic vesicle–polymer mixtures. The experimental results, as represented by the relaxation time and the storage modulus at 1 Hz, revealed that the catanionic vesicle–polymer interactions at play were of electrostatic and hydrophobic origin. Firstly, no association between charged catanionic vesicles and the polymer without charge/hydrophobic modification was observed due to lack of both electrostatic and hydrophobic effects. Secondly, hydrophobic interactions accounted for the association between the hydrophobically modified polymer without charge and charged catanionic vesicles with hydrophobic grafts of the polymer inserting in the catanionic vesicle bilayer. Thirdly, the positively charged polymer without hydrophobic modification could interact with negatively charged catanionic vesicles through electrostatic force on one hand but could not interact with positively charged catanionic vesicles on the other hand. Finally, the positively charged polymer with hydrophobic modification could interact both electrostatically and hydrophobically with negatively charged catanionic vesicles, resulting in the formation of strong gels. The hydrophobic interaction might even overcome the unfavorable electrostatic interaction between the positively charged vesicles and the polymer with positive charge/hydrophobic modification.     

Azulene in Polymers and Their Properties

Azulene, a unique isomer of naphthalene, has received much interest from researchers in different fields due to its unusual chemical structure with a negatively charged 5‐membered ring fused with a positively charged 7‐membered ring. In particular, incorporation of azulene into polymers has led to many interesting properties. This minireview covers functionalization methods of azulene at its various positions of 5‐ and 7‐membered rings to form azulene derivatives including azulene monomers, and gives an overview of a wide range of azulene‐containing polymers including poly(1,3‐azulene), azulene‐based copolymers with connectivity at 1,3‐positions of the 5‐membered ring, or 4,7‐positions of the 7‐membered ring, as well as copolymers with azulene units as side chains. Their chemical and physical properties together with applications of azulene‐containing polymers have also been summarized.     

Compositional heterogeneity effects in multisticker associative polyelectrolytes prepared by micellar polymerization

An aqueous micellar radical polymerization technique has been used to prepare water‐soluble polyelectrolytes of acrylamide (AM) and sodium 2‐acrylamido‐2‐methylpropanesulfonate (NaAMPS) hydrophobically modified with low amounts (2–4 mol %) of N,N‐dihexylacrylamide (DiHexAM). This synthesis method leads to multisticker polymers, in which the number and length of the hydrophobic blocks vary with the degree of conversion. Kinetic studies show an appreciable compositional heterogeneity for these polymers, in contrast to their neutral analogues (i.e., AM/DiHexAM copolymers). The drift in composition observed for the AM/NaAMPS/DiHexAM terpolymers is attributed to the electrostatic repulsion between the negatively charged growing polymeric chains, located in the aqueous continuous medium, and the anionic sodium dodecyl sulfate micelles, inside of which the hydrophobic monomer is entrapped. It is shown that an optimization of the polymerization process can be achieved, which gives terpolymers of homogeneous and well‐defined compositions. The thickening ability of the hydrophobically modified polyelectrolytes is directly affected by the extent of their compositional heterogeneity: an increase in the sample homogeneity leads to a significant viscosity enhancement and marked elastic properties of the polymer solutions. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3261–3274, 2003     

Nanocarriers for cytoplasmic delivery: cellular uptake and intracellular fate of chitosan and hyaluronic acid-coated chitosan nanoparticles in a phagocytic cell model

The cellular uptake of hyaluronic-acid-coated, negatively charged chitosan/triphosphate nanoparticles and that of uncoated, positively charged ones is investigated by studying cellular localization, uptake kinetics and mechanism of internalization in J774.2 macrophages, using non-phagocytic L929 fibroblasts as a control for uncoated nanoparticles. Both kinds of nanoparticles undergo endosomal escape and adopt a similar clathrin-based endocytic mechanism. The surface decoration with HA profoundly influences the kinetics of cellular uptake, with an at least two orders of magnitude slower kinetics, but also the nature of the binding on the cellular surface.     

Redox-gated potential micellar carriers based on electrostatic assembly of soft coordination suprapolymers

We report in this paper the release and uptake of charged payloads in redox responsive electrostatic micellar systems composed of negatively charged soft iron coordination suprapolymers and positively charged block copolymers. This micellar system was reported in our previous work (Yan, Y.; Lan, Y. R.; de Keizer, A.; Drechsler, M.; Van As, H.; Stuart, M. A. C.; Besseling, N. A. M. Redox responsive molecular assemblies based on metallic coordination polymers. Soft Matter, 2010, 6, 3244-3248), where we proposed that the system can be used as a redox-triggered release and uptake system. In this paper, we successfully selected a negatively charged fluorescent dye, eosin B, as a model cargo to track the release and upload process. Upon being compacted in the mixed micelles of coordination polymers and diblock copolymers, the fluorescence of eosin B was effectively quenched. Once reduction was conducted, excess negative charges were introduced to the mixed micelles so that the negatively charged eosin B was expelled out which was accompanied by the recovery of the fluorescence. The free negatively charged eosin B was able to be taken up by the Fe(II) micelles again if oxidation of Fe(II) was carried out since excess positive charges were produced. Beside eosin B, other charged species, such as various charged macromolecules, were tested to be capable of uptake and release by this micellar system. We suppose this system can be potentially used as a redox-gated micellar carrier for uptake and release of charged cargos.     

Designed Intercalators for Modification of DNA Origami Surface Properties

The modification of the backbone properties of DNA origami nanostructures through noncovalent interactions with designed intercalators, based on acridine derivatized with side chains containing esterified fatty acids or oligo(ethylene glycol) residues is reported. Spectroscopic analyses indicate that these intercalators bind to DNA origami structures. Atomic force microscopy studies reveal that intercalator binding does not affect the structural intactness but leads to altered surface properties of the highly negatively charged nanostructures, as demonstrated by their interaction with solid mica or graphite supports. Moreover, the noncovalent interaction between the intercalators and the origami structures leads to alteration in cellular uptake, as shown by confocal microscopy studies using two different eukaryotic cell lines. Hence, the intercalator approach offers a potential means for tailoring the surface properties of DNA nanostructures.     

Highly efficient intracellular drug delivery with a negatively charged hyperbranched polysulfonamine

Efficient intracellular translocation is achieved using an easily prepared hyperbranched polysulfonamine that remains negatively charged at physiological pH. Investigations on the cellular uptake mechanism and the subcellular distribution of PSA are reported. The in vitro cytotoxicity of PSA is found to be low. Using doxorubicin as a model drug, a PSA/drug complex is prepared by electrostatic interaction with a high drug payload that exhibits a controlled release in response to pH. Efficient intracellular drug delivery, strong growth inhibition of tumor cells, and low cytotoxicity to normal cells are observed. The results suggest a possible way to utilize anionic polymers for intracellular delivery of therapeutic moieties or drugs.     

Resolution of nucleic acids by high-performance liquid chromatography

High-performance liquid chromatography is a very powerful technique for the separation and isolation of nucleic acids. Nucleic acids can be generally characterized as long, negatively charged polymers with hydrophobic nucleobases. Chromatographic processes which use electrostatic interactions (anion-exchange), hydrophobic interactions (reversed-phase or salting-out) or both types of interactions (mixed-mode) are most effective for resolution of these materials.     

Spectroscopic Investigations on the Binding of the Photosensitizer Chlorin p6 with Amine-modified Silica Nanoparticles in Aqueous Media

Absorption and emission properties of the amphiphilic photosensitizer Chlorin p ₆ were investigated in aqueous medium in the presence of silica nanoparticles (SiNPs) having positively charged amino groups. The results of these studies reveal that the acid–base ionization equilibrium of Chlorin p ₆ in aqueous medium is significantly affected as a result of strong electrostatic binding between the negatively charged drug and SiNP. The spectroscopic signature of the drug bound to SiNPs suggests that the tri-anionic form of the drug remains bound to the positively charged SiNPs at pH 8.0. As the pH is progressively decreased the formation of hydrophobic aggregates is disrupted significantly due to the presence of electrostatic binding force, which competes with intermolecular hydrophobic forces. The interplay of hydrophobic and electrostatic forces in the drug–nanoparticle binding process might affect the relative uptake and photodynamic efficacy of the free drug and the drug–nanoparticle complex in cancer cells.     

Bright,Highly Water‐Soluble Triazacyclononane Europium Complexes To Detect Ligand Binding with Time‐Resolved FRET Microscopy

Luminescent europium complexes are used in a broad range of applications as a result of their particular emissive properties. The synthesis and application of bright, highly water‐soluble, and negatively charged sulfonic‐ or carboxylic acid derivatives of para‐substituted aryl–alkynyl triazacyclononane complexes are described. Introduction of the charged solubilizing moieties suppresses cellular uptake or adsorption to living cells making them applicable for labeling and performing assays on membrane receptors. These europium complexes are applied to monitor fluorescent ligand binding on cell‐surface proteins with time‐resolved Förster resonance energy transfer (TR‐FRET) assays in plate‐based format and using TR‐FRET microscopy.     

Chitosan and its hydrophobic derivatives: Preparation and aggregation in dilute aqueous solutions

This review surveys the main methods of preparing chitosan and its hydrophobic derivatives and their influence on the microstructure of polymers. The experimental data on the aggregation of these polymers in dilute aqueous solutions are summarized. Basic factors affecting aggregation are analyzed, and its general regularities are revealed. It is shown that, in the case of both chitosan and its hydrophobic derivatives, the formation of aggregates is governed by the competition of attraction of associating groups promoting aggregation and their repulsion arising from the presence of charged units and counterions hindering aggregation. Various aggregate models that were proposed for chitosan derivatives with different main-chain lengths and different contents of associating groups are discussed.     

Bright,Highly Water‐Soluble Triazacyclononane Europium Complexes To Detect Ligand Binding with Time‐Resolved FRET Microscopy

Luminescent europium complexes are used in a broad range of applications as a result of their particular emissive properties. The synthesis and application of bright, highly water‐soluble, and negatively charged sulfonic‐ or carboxylic acid derivatives of para‐substituted aryl–alkynyl triazacyclononane complexes are described. Introduction of the charged solubilizing moieties suppresses cellular uptake or adsorption to living cells making them applicable for labeling and performing assays on membrane receptors. These europium complexes are applied to monitor fluorescent ligand binding on cell‐surface proteins with time‐resolved Förster resonance energy transfer (TR‐FRET) assays in plate‐based format and using TR‐FRET microscopy.     

Structural and thermodynamic features of complexes formed by DNA and synthetic polynucleotides with dodecylamine and dodecyltrimethylammonium bromide

Complex formation of native and denatured DNA, single-stranded polyribonucleotides poly(A) and poly(U), as well as double-stranded poly(A).poly(U) with dodecylamine (DDA) and dodecyltrimethylammonium bromide (DTAB) has been studied by UV-, CD-, IR-spectroscopy and fluorescence analysis of hydrophobic probe pyrene. DDA and DTAB were shown to bind cooperatively with DNA and polyribonucleotides, resulting in the formation of complexes containing hydrophobic micelle-like clusters. Critical aggregation concentration (CAC) of DDA and DTAB shifts sharply to lower values (30-50 times) in the presence of DNA and polynucleotides as compared to critical micelle concentration (CMC) of free DDA and DTAB in solution. The analysis of binding isotherms within the frame of the model of cooperative binding of low-molecular ligands to linear polymers allowed us to determine the thermodynamic parameters of complex formation and estimate the contribution of electrostatic interaction of positively charged heads of amphiphiles with negatively charged phosphate groups of DNA and polyribonucleotides, and hydrophobic interaction of aliphatic chains to complex stability. Electrostatic interaction was shown to make the main contribution to the stability of DNA complexes with DDA, while preferential contribution of hydrophobic interactions is characteristic of DTAB complexes with DNA. The opposite effect of DDA and DTAB on the thermal stability of DNA double helix was demonstrated from UV-melting of DNA-while DTAB stabilizes the DNA helix, DDA, to the contrary, destabilizes it. The destabilizing effect of DDA seems to originate from the displacement of intramolecular hydrogen bonds in complementary Watson-Crick A.T and G.C base pairs with intermolecular H-bonds between unsubstituted DDA amino groups and proton-accepting sites of nucleic bases.     

A threaded loop conformation adopted by a family of peptoid nonamers

Non-natural polymers with well-defined three-dimensional folds offer considerable potential for engineering novel functions that are outside the scope of biological polymers. Here we describe a family of N-substituted glycine or "peptoid" nonamers that folds into an unusual "threaded loop" structure of exceptional thermal stability and conformational homogeneity in acetonitrile. The structure is chain-length-specific and relies on bulky, chiral side chains and chain-terminating functional groups for stability. Notable elements of the structure include the engagement of the positively charged amino terminus by carbonyl groups of the backbone through hydrogen bonding interactions and shielding of polar groups from and near-complete exposure of hydrophobic groups to solvent, in a manner resembling a folded polypeptide globular domain turned inside-out. The structure is stable in a variety of organic solvents but is readily denatured in any solvent/cosolvent milieu with hydrogen bonding potential. The structure could serve as a scaffold for the elaboration of novel functions and could be used to test methodologies for predicting solvent-dependent polymer folding.     

Molecular structure of single DNA complexes with positively charged dendronized polymers

Positively charged dendronized polymers with protonated amine groups at the periphery and different dendron generations are cylindrically shaped nanoobjects whose radii and linear charge densities can be varied systematically. These polyelectrolytes have been complexed with DNA and subsequently adsorbed on precoated mica substrates. The analysis of scanning force microscopy data indicates that DNA wraps around the dendronized polymers. The calculated pitch is 2.30 +/- 0.27 and 2.16 +/- 0.27 nm for DNA wrapped around dendronized polymers of generation two and four, respectively. The complex with the second generation has been shown to be negatively charged, which is consistent with the theory of spontaneous overcharging of macro-ion complexes, when the electrostatic contribution to the free energy dominates over the elastic energy. The complexes may be of interest for the development of nonviral gene delivery systems.     

Tuning substrate selectivity of a cationic enzyme using cationic polymers

Noncovalent interactions between an artificial molecular scaffold and a protein are interesting due to the possibility of reversible modulation of the activity of the protein. alpha-Chymotrypsin is a positively charged protein that has been shown to interact with negatively charged polymers. Here we show that positively charged polymers are also capable of electrostatically binding to this protein. The resulting experiments show that the ability of a polymer to bind a protein does not depend only on the pI of the protein. We also realized that the variations in charge density in the polymer backbone afford different selectivities of the enzyme toward charged substrates.     

Modulating cell behaviors on chiral polymer brush films with different hydrophobic side groups

Chirality is one of the significant biochemical signatures of life. Nearly all biological polymers are homochiral as they usually show high preference toward one specific enantiomer. This phenomenon inspires us to design biomaterials with chiral units and study their interactions with cells and other biological entities. In this article, through adopting three pairs of aliphatic amino acids with different hydrophobic side groups as chiral species, and using two adhesive cell lines as examples, we show that the chirality of polymer brushes can trigger differential cell behaviors on the enantiomorphous surfaces, and more interestingly, such chiral effect on cellular behaviors can be modulated in a certain extent by varying the hydrophobic side groups of the chiral moieties composing the polymers. This work not only proves the versatility of the chiral effect at the cell level but also demonstrates a method to bridge the gap between organic signal molecules and biomaterials. It thus points out a promising approach for designing novel biomaterials based on the chiral effect, which will be an important complement for conventional strategies in the study of biomaterials.