Magnesium Azotetrazole‐1,1′‐dioxide: Synthesis and Promising Properties of Green Insensitive Energetic Materials

Magnesium azotetrazole‐1,1′‐dioxide ( 1 ) was first prepared and intensively characterized by single‐crystal X‐ray diffraction, IR spectroscopy, mass spectrometry, elemental analysis, and DSC measurements. The heat of formation was calculated using the atomization energy method based on quantum chemistry and the heat of detonation was also predicted. The NBO analysis was performed for inspecting charge distributions. The sensitivities towards impact and friction were tested using the BAM standard. The high detonation performance (5289 kJ · kg^–1), good thermal stabilities (245.5 °C) and excellent insensitivity (39.2 J and >360 N) as well as clean decomposition products supports it of great interest as a promising candidate of green insensitive energetic materials.     

Syntheses,Crystal Structures,and Properties of Two Novel CL‐20‐based Cocrystals

In recent years, cocrystallization has emerged as an effective way of tuning the properties of compounds and has been widely used in the field of energetic materials. In this study, we have prepared two novel cocrystals of CL‐20 and methylimidazole, including a 1:2 CL‐20 / 2‐mercapto‐1‐methylimidazole ( 1 ) and a 1:4 CL‐20 / 4‐methyl‐5‐nitroimidazole ( 2 ). Cocrystal 1 has good physical and detonation properties (ρ₁ = 1.652 g · cm^–3, D₁ = 7073 m · s^–1, P₁ = 21.6 GPa); however, cocrystal 2 shows higher properties (ρ₂ = 1.680 g · cm^–3, D₂ = 7945 m · s^–1, P₂ = 27.4 GPa). The performance of both cocrystals is better than those of TNT. Thermal performance suggests that both the cocrystals have moderate thermal stabilities. Cocrystal 1 decomposes at 164.9 °C and cocrystal 2 has an exothermic peak at 221 °C. Both cocrystals are insensitive energetic explosives (IS > 40 J, FS > 360 N). Methylimidazole compounds are rarely used as coformers to form cocrystals with CL‐20, which possess good properties for a range of potential applications. Herein, we provide new possible directions for enriching cocrystal speciation.     

Nitrogen‐rich Salts based on 3‐Dinitromethyl‐[1,2,4]triazine: Synthesis,Characterization, and Performance

1,1‐Diamino‐2,2‐dinitroethylene (FOX‐7), one of the most well‐known energetic materials, has attracted broad attention around the world. To extend the chemistry of FOX‐7, we present here a series of energetic salts based on 3‐dinitromethyl‐[1,2,4]triazine, which is prepared from FOX‐7. All these salts were fully characterized using ¹H NMR, ¹³C NMR, IR, and elemental analysis. In addition, the potassium salt ( 2 ), ammonium salt ( 5 ), and guanidinium salt ( 7 ) were further confirmed by single‐crystal X‐ray diffraction. Extensive hydrogen bonds were observed in these salts. The salts exhibit moderate densities varying from 1.63 to 1.76 g · cm^–3. All the compounds possess good thermal stability with decomposition temperatures from 118 to 267 °C. The detonation performance for salts were calculated by using EXPLO 5, their detonation velocities are in the range from 6807 to 8614 m · s^–1 and detonation pressures fall between 18.8 to 31.6 GPa. All the salts exhibit very low mechanical sensitivity, which indicates their potential application as insensitive energetic materials.     

Insensitive and Thermostable Energetic Materials Based on 3‐Ureido‐4‐tetrazole‐furazan: Synthesis,Characterization, and Properties

Energetic salts composed of ureido, furazan, and tetrazole were prepared by simple and efficient chemical routes to explore new insensitive and thermostable energetic materials. 3‐Ureido‐4‐tetrazole‐furazan ( 3 ) and its ammonium salt ( 5 ) and hydrazinium salt ( 6 ) were confirmed by single‐crystal X‐ray diffraction. The thermal stabilities of the synthesized salts were studied using differential scanning calorimetry, and the detonation performances of these salts were calculated using EXPLO 5 V6.01. All the salts exhibit good thermal stability (Td: 148–259 °C) and mechanical sensitivities (IS > 40 J, FS > 360 N), and their detonation velocities range from 7316 to 8655 m · s^–1. Compounds 6 and 10 are potential candidates as novel insensitive and heat‐resistant explosives because of their high detonation temperatures of 247 and 256 °C, good detonation velocities of 8432 and 8523 m · s^–1, and good detonation pressures of 25.6 and 26.8 GPa.     

Synthesis and Characterization of 3,3′‐Bis(Dinitromethyl)‐5,5′‐Azo‐1H‐1,2,4‐Triazole

The synthesis of 3,3′‐bis(dinitromethyl)‐5,5′‐azo‐1H‐1,2,4‐triazole ( 5 ) using the readily available starting material 2‐(5‐amino‐1H‐1,2,4‐triazol‐3‐yl)acetic acid ( 1 ) is described. All compounds were characterized by means of NMR, IR, and Raman spectroscopy. The energetic compound 5 was additionally characterized by single‐crystal X‐ray diffraction and DSC measurements. The sensitivities towards impact, friction and electrical discharge were determined. In addition, detonation parameters (e.g. heat of explosion, detonation velocity) of the target compound were computed using the EXPLO5 code based on the calculated (CBS‐4M) heat of formation and X‐ray density.     

Synthesis and Promising Properties of a New Family of High‐Nitrogen Compounds: Polyazido‐ and Polyamino‐Substituted N,N′‐Azo‐1,2,4‐triazoles

A new family of high‐nitrogen compounds, that is, polyazido‐ and polyamino‐substituted N,N′‐azo‐1,2,4‐triazoles, were synthesized in a safe and convenient manner and fully characterized. The structures of 3,3′,5,5′‐tetra(azido)‐4,4′‐azo‐1,2,4‐triazole ( 15 ) and 3,3′,5,5′‐tetra(amino)‐4,4′‐azo‐1,2,4‐triazole ( 23 ) were also confirmed by X‐ray diffraction. Differential scanning calorimetry (DSC) was performed to determine their thermal stability. Their heats of formation and density, which were calculated by using Gaussian 03, were used to determine the detonation performances of the related compounds (EXPLO 5.05). The heats of formation of the polyazido compounds were also derived by using an additive method. Compound 15 has the highest heat of formation (6933 kJ kg^?1) reported so far for energetic compounds and a detonation performance that is comparable to that of octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocine (HMX), while compound 23 has a decomposition temperature of up to 290 °C.     

Synthesis and Characterization of Bis(triaminoguanidinium) 5,5′‐Dinitrimino‐3,3′‐azo‐1H‐1,2,4‐triazolate – A Novel Insensitive Energetic Material

The synthesis of 5,5′‐diamino‐3,3′‐azo‐1H‐1,2,4‐triazole ( 3 ) by reaction of 5‐acetylamino‐3‐amino‐1H‐1,2,4‐triazole ( 2 ) with potassium permanganate is described. The application of the very straightforward and efficient acetyl protection of 3,5‐diamino‐1H‐1,2,4‐triazole allows selective reactions of the remaining free amino group to form the azo‐functionality. Compound 3 is used as starting material for the synthesis of 5,5′‐dinitrimino‐3,3′‐azo‐1H‐1,2,4‐triazole ( 4 ), which subsequently reacted with organic bases (ammonia, hydrazine, guanidine, aminoguanidine, triaminoguanidine) to form the corresponding nitrogen‐rich triazolate salts ( 5 – 9 ). All substances were fully characterized by IR and Raman as well as multinuclear NMR spectroscopy, mass spectrometry, and differential scanning calorimetry. Selected compounds were additionally characterized by low temperature single‐crystal X‐ray diffraction measurements. The heats of formation of 4 – 9 were calculated by the CBS‐4M method to be 647.7 ( 4 ), 401.2 ( 5 ), 700.4 ( 6 ), 398.4 ( 7 ), 676.5 ( 8 ), and 1089.2 ( 9 ) kJ · mol^–1. With these values as well as the experimentally determined densities several detonation parameters were calculated using both computer codes EXPLO5.03 and EXPLO5.04. In addition, the sensitivities of 5 – 9 were determined by the BAM drophammer and friction tester as well as a small scale electrical discharge device.     

Two Energetic Salts based on 5,5′‐Bitetrazole‐1,1′‐diolate: Syntheses,Characterization, and Properties

Two salts based on 1H,1′H‐5,5′‐bitetrazole‐1,1′‐diolate (BTO) anion with pyrazole ( 1 ) and imidazole ( 2 ) cations were synthesized with metathesis reactions. Structural characterization was accomplished for them by using the element analysis, Fourier transform infrared spectroscopy (FT‐IR), NMR and mass spectrum, and X‐ray single crystal diffraction. Thermal analysis for the title salts were determined by means of differential scanning calorimetry (DSC) and thermogravimetry‐derivative thermogravimetry (TG‐DTG) as well as the calculation of non‐isothermal kinetic parameters. Consequently, both salts shown acceptable thermal stabilities as the decomposition temperatures were over 200 °C. The enthalpies of formation were calculated for these salts using the measured combustion energies with a result of 70.6 kJ · mol^–1 for 1 and –47.8 kJ · mol^–1 for 2 , respectively. Impact and friction sensitivities were also tested and the results indicated that these salts both have low sensitivities (>40 J, 120 N). The title energetic salts possess acceptable performance, they can therefore be applied in the field of energetic materials.     

3,3′‐Bi(1,2,4‐oxadiazoles) Featuring the Fluorodinitromethyl and Trinitromethyl Groups

Here we report on the preparation of two hydrogen atom free 3,3′‐bi(1,2,4‐oxadiazole) derivatives. 5,5′‐Bis(fluorodinitromethyl)‐3,3′‐bi(1,2,4‐oxadiazole) was synthesised by fluorination of diammonium 5,5′‐bis(dinitromethanide)‐3,3′‐bi(1,2,4‐oxadiazole). For our previously reported analogue 5,5′‐bis(trinitromethyl)‐3,3′‐bi(1,2,4‐oxadiazole), a new synthetic route starting from new 3,3′‐bi(1,2,4‐oxadiazolyl)‐5,5′‐diacetic acid was developed. In this course also hitherto unknown 5,5′‐dimethyl‐3,3′‐bi(1,2,4‐oxadiazole) was isolated. The compounds were characterised by multinuclear NMR spectroscopy, IR and Raman spectroscopy, elemental analysis as well as mass spectrometry. X‐ray diffraction studies were performed and the crystal structures for the 5,5'‐dimethyl and 5,5'‐(fluorodinitromethyl) derivatives are reported. The energetic 5,5'‐(fluorodinitromethyl) and 5,5'‐(trinitromethyl) compounds do not contain any hydrogen atoms and show remarkable high densities. Furthermore, the thermal stabilities and sensitivities were determined by differential scanning calorimetry (DSC) and standardised impact and friction tests. The heats of formation were calculated by the atomisation method based on CBS‐4M enthalpies. With these values and the room‐temperature X‐ray densities, several detonation and propulsion parameters, such as the detonation velocity and pressure as well as the specific impulse of mixtures with aluminium, were computed using the EXPLO5 code.     

Preparation,Crystal Structure and Properties of a New Crystal Form of Diammonium 5,5′‐bistetrazole‐1,1′‐diolate

A new crystal form of diammonium 5,5′‐bistetrazole‐1,1′‐diolate ( 1 ) was prepared by two novel methods and fully characterized by using IR, NMR spectroscopy, elementary analysis, single crystal X‐ray crystallography and thermal gravity/differential thermal analysis (TG/DTA). Crystalline 1 was found as monoclinic and space group of P21/c (14). The TG/DTA analysis showed that the decomposition temperature of 1 was 287.8°C with a mass loss of 91.2% in the range of 220–300°C at a heating rate of 5°C/min. The sensitivities test towards impact, friction of 1 indicated that 1 has much lower sensitivities than those of RDX/HMX and is comparable to those of TNT, which suggested that 1 could be used as a good candidate of new insensitive energetic compound.     

Maximum Compaction of Ionic Organic Explosives: Bis(hydroxylammonium) 5,5′‐Dinitromethyl‐3,3′‐bis(1,2,4‐oxadiazolate) and its Derivatives

Within this contribution on bis(oxadiazoles) we report on bis‐hydroxylammonium 5,5′‐dinitro‐methyl‐3,3′‐bis(1,2,4‐oxadiazolate), which (to the best of our knowledge) shows the highest density (2.00 g cm^?3 at 92 K, 1.95 g cm^?3 at RT) ever reported for an ionic CHNO explosive. Also the corresponding bis(ammonium) salt shows an outstanding density of 1.95 g cm^?3 (173 K). The reaction of the 3,3′‐bis(1,2,4‐oxadiazolyl)‐5,5′‐bis(2,2′‐dinitro)‐diacetic acid diethyl ester with different nitrogen‐rich bases, such as ammonia, hydrazine, hydroxylamine, and triaminoguanidine causes decarboxylation followed by the formation of the corresponding salts (cation/anion stoichiometry 2:1). The reactions are performed at ambient temperature in H₂O/MeOH mixtures and furnish qualitatively pure products showing characteristics of typical secondary explosives. The obtained compounds were characterized by multinuclear NMR spectroscopy, IR and Raman spectroscopy, as well as mass spectrometry. Single‐crystal X‐ray diffraction studies were performed and the structures of all compounds were determined at low temperatures. The thermal stability was measured by differential scanning calorimetry (DSC). The sensitivities were explored by using the BAM drophammer and friction test. The heats of formation were calculated by the atomization method based on CBS‐4M enthalpies. With these values and the X‐ray densities, several detonation parameters such as the detonation pressure, velocity, energy, and temperature were computed using the EXPLO5 code.     

Synthesis and Characterization of Salts of the 3,6‐Dinitro‐[1,2,4]triazolo[4,3‐b][1,2,4]triazolate Anion: Insensitive Energetic Materials Available From Economical Precursors

In this work, the treatment of 3,6,7‐triamino‐[1,2,4]triazolo[4,3‐b][1,2,4]triazole (TATOT)^[1] with sulfuric acid and sodium nitrite results in elimination of the N‐amine and the formation of the new energetic anion 3,6‐dinitro‐[1,2,4]triazolo[4,3‐b][1,2,4]triazolate (DNTT) via nitro‐Sandmeyer chemistry. This new energetic anion is available in a convenient and inexpensive three‐step process from inexpensive commercial starting materials. Several nitrogen rich salts of this material have been prepared and their chemical (infrared, Raman, NMR, single‐crystal X‐ray) and energetic (impact, friction, thermal) properties determined. As a rule, this class of energetic salts are insensitive energetic materials.     

Crystal structure,thermal properties and detonation characterization of bis(5‐amino‐1,2,4‐triazol‐4‐ium‐3‐yl)methane dichloride

Bis(5‐amino‐1,2,4‐triazol‐4‐ium‐3‐yl)methane dichloride (BATZM·Cl₂ or C₅H₁₀N₈²⁺·2Cl^?) was synthesized and crystallized, and the crystal structure was characterized by single‐crystal X‐ray diffraction; it belongs to the space group C2/c (monoclinic) with Z = 4. The structure of BATZM·Cl₂ can be described as a V‐shaped molecule with reasonable chemical geometry and no disorder, and its one‐dimensional structure can be described as a rhombic helix. The specific molar heat capacity (C_p,m) of BATZM·Cl₂ was determined using the continuous C_p mode of a microcalorimeter and theoretical calculations, and the C_p,m value is 276.18 J K^?1 mol^?1 at 298.15 K. The relative deviations between the theoretical and experimental values of C_p,m, H_T – H_298.15K and S_T – S_298.15K of BATZM·Cl₂ are almost equivalent at each temperature. The detonation velocity (D) and detonation pressure (P) of BATZM·Cl₂ were estimated using the nitrogen equivalent equation according to the experimental density; BATZM·Cl₂ has a higher detonation velocity (7143.60 ± 3.66 m s^?1) and detonation pressure (21.49 ± 0.03 GPa) than TNT. The above results for BATZM·Cl₂ are compared with those of bis(5‐amino‐1,2,4‐triazol‐3‐yl)methane (BATZM) and the effect of salt formation on them is discussed.     

Nitrogen‐Rich Energetic Dianionic Salts of 3, 4‐Bis(1H‐5‐­tetrazolyl)furoxan with Excellent Thermal Stability

Nitrogen‐rich 3, 4‐bis(1H‐tetrazol‐5‐yl)furoxan (H₂BTF, 2 ) and its energetic salts with excellent thermal stability were successfully synthesized and fully characterized by ¹H, and ¹³C NMR, and IR spectroscopy, differential scanning calorimetry (DSC), and elemental analyses. Additionally, the structures of barium ( 3 ) and 1‐methyl‐3, 4, 5‐triamino‐triazolium ( 10 ) salts were confirmed by single‐crystal X‐ray diffraction. The densities of the energetic salts paired with organic cations range between 1.56 and 1.85 g · cm^–3 as measured by a gas pycnometer. Based on the measured densities and calculated heats of formation, the detonation pressures and velocities are calculated to be in the range 23.4–32.0 GPa and 7939–8915 m · s^–1, which make them competitive energetic materials.     

Synthesis and Properties of N,N′‐Bis(difuroxano [3,4‐b:3′,4′‐d]phenyl)oxalic Amide

N,N′‐Bis(difuroxano[3,4‐b:3′,4′‐d]phenyl)oxalic amide was synthesized via acylation, nitration, azidation, and pyrolysis‐denitrogenation from the starting materials of oxalyl chloride and 3,5‐dichloroaniline, under mild reaction conditions, with the yields of 81.0%, 82.0%, 86.0% and 81.7% respectively. The title compound and its precursors were characterized by ¹H NMR, IR, MS, and elemental analysis. The title compound has a density of 1.92 g·cm^?3 by a suspension method, a standard formation enthalpy of 979 kJ·mol^?1 calculated by Gaussian programs, a detonation velocity of 8.17 km·s^?1, and a detonation pressure of 31 GPa obtained by Kamlet Equation. The thermal decomposition reactions of the title compound at different heating rates were tested by differential scanning calorimetry (DSC). The kinetics parameters of the pyrolysis of the compound were calculated by Kissinger's method. The values of apparent activation energy (E_a) and pre‐exponential constant (A) were 226.7 kJ·mol^?1 and 10^23.17 s^?1 respectively. It was presupposed that N,N′‐bis(difuroxano[3,4‐b:3′,4′‐d]phenyl)oxalic amide would be a promising high energetic explosive with low sensitivity.     

Energetic Materials Based on 5,5′‐Diamino‐4,4′‐dinitramino‐3,3′‐bi‐1,2,4‐triazole

A simple and straightforward synthesis of 5,5′‐diamino‐4,4′‐dinitramino‐3,3′‐bi‐1,2,4‐triazole by the selective nitration of 4,4′,5,5′‐tetraamino‐3,3′‐bi‐1,2,4‐triazole is presented. The interaction of the amino and nitramino groups improves the energetic properties of this functionalized bitriazole. For a deeper investigation of these properties, various nitrogen‐rich derivatives were synthesized. The new compounds were investigated and characterized by spectroscopy (¹H and ¹³C NMR, IR, Raman), elemental analysis, mass spectrometry, differential thermal analysis (DTA), X‐ray analysis, and impact and friction sensitivities (IS, FS). X‐ray analyses were performed and deliver insight into structural characteristics with which the stability of the compounds can be explained. The standard enthalpies of formation were calculated for all compounds at the CBS‐4M level of theory, revealing highly positive heats of formation. The energetic performance of the new molecules was predicted with the EXPLO5 V6.02 computer. A small‐scale shock reactivity test (SSRT) and a toxicity test gave a first impression of the performance and toxicity of selective compounds.     

Synthesis of a Novel Double Salt: Ammonium 3,4‐Diamino‐1,2,4‐triazolium Styphnate

Nitrogen‐rich double salt ammonium 3,4‐diamino‐1,2,4‐triazoliumstyphnate (NH₄ · DATr · TNR) ( 2 ) with good thermal stability was successfully synthesized by reacting 3,4‐diamino‐1,2,4‐triazolium chloride aqueous solution with styphnic acid methanol solution under the reaction medium of aqueous ammonia. The title double salt was characterized by elemental analysis (EA), Fourier transformation infrared spectrum (FT‐IR), and X‐ray single‐crystal diffraction. It crystallizes in the monoclinic crystal system with space group P2₁/n. Its density is 1.780 g · cm^–3. Compound 2 is thermal stable below 200 °C by the differential scanning calorimetry (DSC) test. The non‐isothermal kinetics parameters were calculated by the Kissinger's method and Ozawa‐Doyle's method, respectively. In addition, compound 2 showed low friction and impact sensitivities.     

Synthesis and Characterization of the New Heterocycle 5‐(4‐Amino‐1,2,4‐triazol‐3‐on‐5′‐yl)‐1H‐tetrazole and Some Ionic Nitrogen‐Rich Derivatives

A new heterocycle consisting of a tetrazole ring attached to an amino‐triazolone ring, namely 5‐(4‐amino‐1,2,4‐triazol‐3‐on‐5′‐yl)‐1H‐tetrazole ( 3 ) as well as its ammonium ( 2 ), hydroxylammonium ( 3 ), and sodium salt ( 4 ), is introduced. Its ammonium salt ( 2 ) is formed starting from tetrazole‐5‐carboxamide oxime ( 1 ), which is reacted with diaminourea (carbonyldihydrazide) in aqueous media. All compounds 2 , 3 , 4 , 5 were structurally characterized by single crystal X‐ray diffraction. The thermal behavior was investigated using differential scanning calorimetry, and the sensitivities towards impact, friction, and electrostatic discharge were determined. Furthermore, several detonation parameters were calculated with the program EXPLO5 to determine the potential use of these compounds as highly energetic materials.     

4‐Nitro‐3‐(5‐tetrazole)furoxan and Its Salts: Synthesis,Characterization, and Energetic Properties

A series of new energetic salts based on 4‐nitro‐3‐(5‐tetrazole)furoxan (HTNF) has been synthesized. All of the salts have been fully characterized by nuclear magnetic resonance (¹H and ¹³C), infrared (IR) spectroscopy, elemental analysis, and differential scanning calorimetry (DSC). The crystal structures of neutral HTNF ( 3 ) and its ammonium ( 4 ) and N‐carbamoylguanidinium salts ( 9 ) have been determined by single‐crystal X‐ray diffraction analysis. The densities of 3 and its nine salts were found to range from 1.63 to 1.84 g cm^?3. Impact sensitivities have been determined by hammer tests, and the results ranged from 2 J (very sensitive) to >40 J (insensitive). Theoretical performance calculations (Gaussian 03 and EXPLO 5.05) provided detonation pressures and velocities for the ionic compounds 4 – 12 in the ranges 25.5–36.2 GPa and 7934–8919 m s^?1, respectively, which make them competitive energetic materials.     

Preparation,Crystal Structure,and Thermal Analysis of Two Energetic Salts Based on Nitro Phenolic Compounds with Diamino‐glyoxine

As a key research objective for environmentally friendly energetic materials, energetic salts without heavy metal have received wide attention. The energetic salts DAG · PA · H₂O ( 1 ) and DAG · TNR · H₂O ( 2 ) were synthesized by using diamino‐glyoxine (DAG) and picric acid (PA) or 2, 4,6‐trinitro‐resorcinol (TNR) as raw materials, and their structures were characterized by elemental analysis, FT‐IR, ¹H NMR, and ¹³C NMR spectroscopy. Single crystals of the title salts were cultured and their structures were determined by X‐ray single‐crystal diffraction. Both salts belong to the triclinic space group P1 with density values of 1.764 and 1.751 g · cm^–3, respectively. The thermal decomposition behaviors of both salts were investigated by differential scanning calorimetry (DSC), the non‐isothermal kinetic parameters and the critical temperature of thermal explosion were calculated. The heats of formation for the salts were also determined through the combustion heats date measured by using the oxygen bomb calorimetry. In addition, the detonation pressure (P) and detonation velocities (D) of the salts were predicted by using the K‐J equations, and their sensitivities towards impact and friction were tested. The results indicated that the title salts have potential applications in the field of energetic materials.