Reoxidation of Transition‐metal Catalysts with O2

Transition‐metal catalyzed oxidation reactions are central components of organic chemistry. On behalf of green and sustainable chemistry, molecular oxygen (O₂) has been considered as an ideal oxidant due to its natural, inexpensive, and environmentally friendly characters, and therefore offers attractive academic and industrial prospects. In recent years, some powerful organic oxidation methods have been continuously developed. Among them, the use of molecular oxygen (O₂) as a green and sustainable oxidant has attracted considerable attentions. However, the development of new transition metal‐catalyzed protocols using O₂ as an ideal oxidant is highly desirable but very challenging because of the low standard electrode potential of O₂ to reoxidize the transition‐metal catalysts. In this Account, we highlight some of our progress toward the use of transition‐metal catalyzed aerobic oxidation reactions. Through the careful selection of ligand and the acidic additives, we have successfully realized the reoxidation of Cu, Pd, Mn, Fe, Ru, Rh, and bimetallic catalysts under O₂ or air atmosphere (1 atm) for the oxidative coupling, oxygenation reactions, oxidative C‐H/C‐C bond cleavage, oxidative annulation, and olefins difunctionalization reactions. Most of the reactions can tolerate a range of functional groups. These methods provide new strategies for the green synthesis of alkynes, (α ‐keto)amides/esters, ketones/diones, O/N‐heterocycles, β ‐azido alcohols, and nitriles. The high efficiency, low cost, and simple operation under air make these methodologies very attractive and practical. We will also discuss the mechanisms of these reactions which might be useful to promote the new type of aerobic oxidative reaction design.     

CuPd Nanoparticles as a Robust Catalyst for Electrochemical Allylic Alkylation

An efficient CuPd nanoparticle (NP) catalyst (3 nm CuPd NPs deposited on carbon support) is designed for catalyzing electrochemical allylic alkylation in water/isopropanol (1:1 v/v) and 0.2 m KHCO₃ solution at room temperature. The Pd catalysis was Pd/Cu composition‐dependent, and CuPd NPs with a Pd/Cu ratio close to one are the most efficient catalyst for the selective cross‐coupling of alkyl halides and allylic halides to form C?C hydrocarbons with product yields reaching up to 99 %. This NP‐catalyzed electrochemical allylic alkylation expands the synthetic scope of cross‐coupling reactions and can be further extended to other organic reaction systems for developing green chemistry electrosynthesis methods.     

In Situ Generation and Stabilization of Accessible Cu/Cu2O Heterojunctions inside Organic Frameworks for Highly Efficient Catalysis

Heterostructural metal/metal oxides are the very promising substituents of noble‐metal catalysts; however, generation and further stabilization of accessible metal/metal oxide heterojunctions are very difficult. A strategy to encapsulate and stabilize Cu/Cu₂O nanojunctions in porous organic frameworks in situ is developed by tuning the acrylate contents in copper‐based metal–organic frameworks (Cu‐MOFs) and the pyrolytic conditions. The acrylate groups play important roles on improving the polymerization degree of organic frameworks and generating and stabilizing highly dispersed and accessible Cu/Cu₂O heteronanojunctions. As a result, pyrolysis of the MOF ZJU‐199, consisting of three acrylates per ligand, generates abundant heterostructural Cu/Cu₂O discrete domains inside porous organic matrices at 350 °C, demonstrating excellent catalytic properties in liquid‐phase hydrogenation of furfural into furfuryl alcohol, which are much superior to the non‐noble metal‐based catalysts.     

A Single‐Molecule‐Level Mechanistic Study of Pd‐Catalyzed and Cu‐Catalyzed Homocoupling of Aryl Bromide on an Au(111) Surface

On‐surface Pd‐ and Cu‐catalyzed C?C coupling reactions between phenyl bromide functionalized porphyrin derivatives on an Au(111) surface have been investigated under ultra‐high vacuum conditions by using scanning tunneling microscopy and kinetic Monte Carlo simulations. We monitored the isothermal reaction kinetics by allowing the reaction to proceed at different temperatures. We discovered that the reactions catalyzed by Pd or Cu can be described as a two‐phase process that involves an initial activation followed by C?C bond formation. However, the distinctive reaction kinetics and the C?C bond‐formation yield associated with the two catalysts account for the different reaction mechanisms: the initial activation phase is the rate‐limiting step for the Cu‐catalyzed reaction at all temperatures tested, whereas the later phase of C?C formation is the rate‐limiting step for the Pd‐catalyzed reaction at high temperature. Analysis of rate constants of the Pd‐catalyzed reactions allowed us to determine its activation energy as (0.41±0.03) eV.     

Sophisticated Design of Covalent Organic Frameworks with Controllable Bimetallic Docking for a Cascade Reaction

Precise control of the number and position of the catalytic metal ions in heterogeneous catalysts remains a big challenge. Here we synthesized a series of two‐dimensional (2D) covalent organic frameworks (COFs) containing two different types of nitrogen ligands, namely imine and bipyridine, with controllable contents. For the first time, the selective coordination of the two nitrogen ligands of the 2D COFs to two different metal complexes, chloro(1,5‐cyclooctadiene)rhodium(I) (Rh(COD)Cl) and palladium(II) acetate (Pd(OAc)₂), has been realized using a programmed synthetic procedure. The bimetallically docked COFs showed excellent catalytic activity in a one‐pot addition–oxidation cascade reaction. The high surface area, controllable metal‐loading content, and predesigned active sites make them ideal candidates for their use as heterogeneous catalysts in a wide range of chemical reactions.     

Continuous‐Flow Suzuki‐Miyaura and Mizoroki‐Heck Reactions under Microwave Heating Conditions

Microwave‐assisted continuous‐flow reactions have attracted significant interest from synthetic organic chemists, especially process chemists from practical points of view, due to a less complicated shift to large‐scale synthesis based on simple and continuous access to products with low energy requirements. In this personal account, we focused on the Suzuki‐Miyaura and Mizoroki‐Heck reactions, both of which are significantly important cross‐coupling reactions for the synthesis of various functional materials. Microwave power is effective for heating. Typical homogeneous palladium catalysts, such as PdCl₂(PPh₃)₂, Pd(PPh₃)₄, and Pd(OAc)₂, as well as heterogeneous palladium catalysts, such as Pd‐film, Pd/Al₂O₃, Pd/SiO₂, and Pd supported on polymers, can be used for these reactions.     

Confined Ultrathin Pd‐Ce Nanowires with Outstanding Moisture and SO2 Tolerance in Methane Combustion

An efficient strategy (enhanced metal oxide interaction and core–shell confinement to inhibit the sintering of noble metal) is presented confined ultrathin Pd‐CeO_x nanowire (2.4 nm) catalysts for methane combustion, which enable CH₄ total oxidation at a low temperature of 350 °C, much lower than that of a commercial Pd/Al₂O₃ catalyst (425 °C). Importantly, unexpected stability was observed even under harsh conditions (800 °C, water vapor, and SO₂), owing to the confinement and shielding effect of the porous silica shell together with the promotion of CeO₂. Pd‐CeO_x solid solution nanowires (Pd‐Ce NW) as cores and porous silica as shells (Pd‐CeNW@SiO₂) were rationally prepared by a facile and direct self‐assembly strategy for the first time. This strategy is expected to inspire more active and stable catalysts for use under severe conditions (vehicle emissions control, reforming, and water–gas shift reaction).     

Pd单原子/团簇高效催化铃木偶联反应

铃木偶联反应是合成聚烯烃、苯乙烯和联苯衍生物等功能性有机化合物的有力工具,广泛应用于精细化工、制药和生化工业领域.钯(Pd)基催化剂是目前性能最好的铃木偶联反应催化剂,但钯的低丰度和高成本限制了其大规模应用.因此,提高Pd原子的利用效率,降低Pd用量至关重要.减小金属纳米粒子的尺寸,使其成为小团簇甚至孤立的金属原子是实...     

Supported Pd–Cu Bimetallic Nanoparticles That Have High Activity for the Electrochemical Oxidation of Methanol

Monodisperse bimetallic Pd–Cu nanoparticles with controllable size and composition were synthesized by a one‐step multiphase ethylene glycol (EG) method. Adjusting the stoichiometric ratio of the Pd and Cu precursors afforded nanoparticles with different compositions, such as Pd₈₅–Cu₁₅, Pd₅₆–Cu₄₄, and Pd₃₉–Cu₆₁. The nanoparticles were separated from the solution mixture by extraction with non‐polar solvents, such as n‐hexane. Monodisperse bimetallic Pd–Cu nanoparticles with narrow size‐distribution were obtained without the need for a size‐selection process. Capping ligands that were bound to the surface of the particles were removed through heat treatment when the as‐prepared nanoparticles were loaded onto a Vulcan XC‐72 carbon support. Supported bimetallic Pd–Cu nanoparticles showed enhanced electrocatalytic activity towards methanol oxidation compared with supported Pd nanoparticles that were fabricated according to the same EG method. For a bimetallic Pd–Cu catalyst that contained 15 % Cu, the activity was even comparable to the state‐of‐the‐art commercially available Pt/C catalysts. A STEM‐HAADF study indicated that the formation of random solid‐solution alloy structures in the bimetallic Pd₈₅–Cu₁₅/C catalysts played a key role in improving the electrochemical activity.     

Engineering Metal–Organic Framework Catalysts for C−C and C−X Coupling Reactions: Advances in Reticular Approaches from 2014–2018

Metal–organic frameworks (MOFs) are a class of crystalline porous materials that have been actively used for several industrial and synthetic applications. MOFs are spatially and geometrically extrapolated coordination polymers with intriguing properties such as tunable porosity and dimensionality. In terms of their catalytic efficiency, MOFs combine the easy recoverability of heterogeneous catalysts with the increased selectivity of biological catalysts. It is therefore not surprising that a lot of work on optimizing MOF catalysts for organic transformations has been carried out over the past decade. In this review, recent developments in MOF catalysis are summarized, with special attention being paid to C−C, C−N, and C−O coupling reactions. The influence of pore size, pore environment, and load on catalytic activity is described. Post-synthetic stabilization techniques and host–guest interactions in caged MOF scaffolds are detailed. Mechanistic aspects pertaining to the use of MOFs in asymmetric heterogeneous catalysis are highlighted and categorized.     

Zn3(BTC)2 as a Highly Efficient Reusable Catalyst for the Synthesis of 2‐Aryl‐1H‐Benzimidazole

Zn₃(BTC)₂ metal‐organic frameworks as recyclable and heterogeneous catalysts were effectively used to catalyze the synthesis of benzimidazole derivatives from o‐phenylendiamine and aldehydes in ethanol. This method provides 2‐aryl‐1H‐benzimidazoles in good to excellent yields with little catalyst loading. The catalyst was characterized using different techniques such as X‐ray diffraction (XRD), energy dispersive X‐ray (EDX) analysis, scanning electron microscopy (SEM), and Fourier transform infrared (FT‐IR) spectroscopy.     

Metal-Organic Frameworks as Versatile Heterogeneous Solid Catalysts for Henry Reactions

Metal–organic frameworks (MOFs) have become one of the versatile solid materials used for a wide range of applications, such as gas storage, gas separation, proton conductivity, sensors and catalysis. Among these fields, one of the more well-studied areas is the use of MOFs as heterogeneous catalysts for a broad range of organic reactions. In the present review, the employment of MOFs as solid catalysts for the Henry reaction is discussed, and the available literature data from the last decade are grouped. The review is organized with a brief introduction of the importance of Henry reactions and structural properties of MOFs that are suitable for catalysis. The second part of the review discusses the use of MOFs as solid catalysts for the Henry reaction involving metal nodes as active sites, while the third section provides data utilizing basic sites (primary amine, secondary amine, amides and urea-donating sites). While commenting on the catalytic results in these two sections, the advantage of MOFs over other solid catalysts is compared in terms of activity by providing turnover number (TON) values and the structural stability of MOFs during the course of the reaction. The final section provides our views on further directions in this field.     

Unveiling the Local Structure of Palladium Loaded into Imine‐Linked Layered Covalent Organic Frameworks for Cross‐Coupling Catalysis

Layered covalent organic frameworks (2D‐COFs), composed of reversible imine linkages and accessible pores, offer versatility for chemical modifications towards the development of catalytic materials. Nitrogen‐enriched COFs are good candidates for binding Pd species. Understanding the local structure of reacting Pd sites bonded to the COF pores is key to rationalize interactions between active sites and porous surfaces. By combining advanced synchrotron characterization methods with periodic computational DFT modeling, the precise atomic structure of catalytic Pd sites attached to local defects is resolved within an archetypical imine‐linked 2D‐COF. This material was synthesized using an in situ method as a gel, under which imine hydrolysis and metalation reactions are coupled. Local defects formed in situ within imine‐linked 2D‐COF materials are highly reactive towards Pd metalation, resulting in active materials for Suzuki–Miyaura cross‐coupling reactions.     

Nickel‐Catalyzed Cross‐Coupling of Sulfonamides With (Hetero)aryl Chlorides

The development of Ni‐catalyzed C?N cross‐couplings of sulfonamides with (hetero)aryl chlorides is reported. These transformations, which were previously achievable only with Pd catalysis, are enabled by use of air‐stable ( L )NiCl(o‐tol) pre‐catalysts (L= PhPAd‐DalPhos and PAd2‐DalPhos ), without photocatalysis. The collective scope of (pseudo)halide electrophiles (X=Cl, Br, I, OTs, and OC(O)NEt₂) demonstrated herein is unprecedented for any reported catalyst system for sulfonamide C?N cross‐coupling (Pd, Cu, Ni, or other). Preliminary competition experiments and relevant coordination chemistry studies are also presented.     

Metal–Organic Perovskites: Synthesis,Structures, and Magnetic Properties of [C(NH2)3][MII(HCOO)3] (M=Mn,Fe, Co,Ni, Cu,and Zn; C(NH2)3= Guanidinium)

We report the synthesis, crystal structures, and spectral, thermal, and magnetic properties of a family of metal–organic perovskite ABX₃, [C(NH₂)₃][M^II(HCOO)₃], in which A=C(NH₂)₃ is guanidinium, B=M is a divalent metal ion (Mn, Fe, Co, Ni, Cu, or Zn), and X is the formate HCOO^?. The compounds could be synthesized by either diffusion or hydrothermal methods from water or water‐rich solutions depending on the metal. The five members (Mn, Fe, Co, Ni, and Zn) are isostructural and crystallize in the orthorhombic space group Pnna, while the Cu member in Pna2₁. In the perovskite structures, the octahedrally coordinated metal ions are connected by the anti–anti formate bridges, thus forming the anionic NaCl‐type [M(HCOO)₃]^? frameworks, with the guanidinium in the nearly cubic cavities of the frameworks. The Jahn–Teller effect of Cu²⁺ results in a distorted anionic Cu–formate framework that can be regarded as Cu–formate chains through short basal Cu? O bonds linked by the long axial Cu? O bonds. These materials show higher thermal stability than other metal–organic perovskite series of [AmineH][M(HCOO)₃] templated by the organic monoammonium cations (AmineH⁺) as a result of the stronger hydrogen bonding between guanidinium and the formate of the framework. A magnetic study revealed that the five magnetic members (except Zn) display spin‐canted antiferromagnetism, with a Néel temperature of 8.8 (Mn), 10.0 (Fe), 14.2 (Co), 34.2 (Ni), and 4.6 K (Cu). In addition to the general spin‐canted antiferromagnetism, the Fe compound shows two isothermal transformations (a spin‐flop and a spin‐flip to the paramagnetic phase) within 50 kOe. The Co member possesses quite a large canting angle. The Cu member is a magnetic system with low dimensional character and shows slow magnetic relaxation that probably results from the domain dynamics.     

Development of dipyridine‐based coordinative polymers for reusable heterogeneous catalysts

Poly(di(pyridin‐2‐yl)methyl acrylate) (PDPyMA), which was obtained by the free radical polymerization of designed coordinative monomer of di(pyridin‐2‐yl)methyl acrylate, is able to coordinate with various metal ions to form heterogeneous catalysts for diverse catalytic reactions. The Pd and Cu complexes supported by PDPyMA were developed for the heterogeneous Suzuki‐Miyaura reaction and Friedel‐Crafts alkylation, respectively. The PDPyMA‐based catalysts showed no significant decline of reactivity after five times recycling. However, the hydrolysis of the PDPyMA backbone under alkaline conditions limited the catalytic efficiency of this heterogeneous catalyst so that the coordinative monomer was redesigned as 1,1‐di(pyridine‐2‐yl)‐2‐(4‐vinylphenyl)ethan‐1‐ol and then 2,2′‐(1‐methoxy‐2‐(4‐vinylphenyl)ethane‐1,1‐diyl)dipyridine (MVPhDPy). With copolymerization of N‐isopropyl acrylamide (NIPAM), the efficiency of polymer‐based heterogeneous catalysts could be further raised, demonstrated by the increased turn over number in the Suzuki‐Miyaura reaction, which approached 5,260 by using the catalyst formed from poly(MVPhDPy‐co‐NIPAM) and Pd(OAc)₂. poly(MVPhDPy‐co‐NIPAM) copolymer, therefore, could be a versatile platform to support different metal ions for various heterogeneous catalytic reactions.     

3D Microporous Base‐Functionalized Covalent Organic Frameworks for Size‐Selective Catalysis

The design and synthesis of 3D covalent organic frameworks (COFs) have been considered a challenge, and the demonstrated applications of 3D COFs have so far been limited to gas adsorption. Herein we describe the design and synthesis of two new 3D microporous base‐functionalized COFs, termed BF‐COF‐1 and BF‐COF‐2, by the use of a tetrahedral alkyl amine, 1,3,5,7‐tetraaminoadamantane (TAA), combined with 1,3,5‐triformylbenzene (TFB) or triformylphloroglucinol (TFP). As catalysts, both BF‐COFs showed remarkable conversion (96 % for BF‐COF‐1 and 98 % for BF‐COF‐2), high size selectivity, and good recyclability in base‐catalyzed Knoevenagel condensation reactions. This study suggests that porous functionalized 3D COFs could be a promising new class of shape‐selective catalysts.     

Conjugated Microporous Polymers for Heterogeneous Catalysis

Conjugated microporous polymers (CMPs) are a class of crosslinked polymers that combine permanent micropores with π‐conjugated skeletons and possess three‐dimensional (3D) networks. Compared with conventional materials such as metal–organic frameworks (MOFs) and covalent organic frameworks (COFs), CMPs usually have superior chemical and thermal stability. CMPs have made significant progress in heterogeneous catalysis in the past seven years. With a bottom‐up strategy, catalytic moieties can be directly introduced into in the framework to produce heterogeneous CMP catalysts. Higher activity, stability, and selectivity can be obtained with heterogeneous CMP catalysts in comparison with their homogeneous analogs. In addition, CMP catalysts can be easily isolated and recycled. In this review, we focus on CMPs as an intriguing platform for developing various highly efficient and recyclable heterogeneous catalysts in organic reactions. The design, synthesis, and structure of these CMP catalysts are also discussed in this focus review.     

Water‐Soluble Three‐Dimensional Polymers: Non‐Covalent and Covalent Synthesis and Functions†

Water‐soluble three‐dimensional (3D) polymers are structurally ideal for the construction of ordered porous materials for in‐situ and tunable loading and release of guests. For many years, studies on ordered porous materials have been confined to crystalline solids. Since 2014, self‐assembly has been developed as a robust strategy for the preparation of water‐soluble 3D polymers that possess defined and intrinsic porosity. Through the encapsulation of cucurbit[8]uril for aromatic dimers, ordered diamondoid supramolecular organic frameworks can be assembled from tetrahedral monomers. With [Ru(bipy)₃]²⁺‐derived octahedral complexes as precursors, cubic supramolecular metal‐organic frameworks have been assembled. One supramolecular organic framework has also been utilized to prepare the first homogeneous covalent organic framework through the [2+2] alkene cycloaddition, whereas the quantitative formation of the hydrazone bonds can be utilized to synthesize flexible porous organic frameworks. The new water‐soluble ordered and flexible polymeric frameworks are able to include drugs and biomacromolecules to accomplish in situ loading and intracellular delivery and to enrich photosensitizers and catalysts to enhance discrete visible light‐induced reactions. This review highlights the advances.     

Effect of organic moieties (phenyl,naphthalene, and biphenyl) in Zr-MIL-140 on the hydrogenation activity of Pd nanoparticles

MIL-140-type metal organic frameworks(isoreticular zirconium oxide MOFs) with different aromatic moieties(phenyl,naphthalene,and biphenyl) have been synthesized and employed as the supports of palladium nanoparticles(Pd NPs).The catalysts were characterized by XRD,BET,TEM and CO chemisorption.The results reveal that Pd NPs are homogeneously dispersed on all materials whereas different accessibility to CO is observed.The hydrogenation performance in C=C saturation with respect to the effect of the aromatic moiety is compared.The Pd/MIL-140 A MOF with the highest hydrogenation activity among the three catalysts comprised of different aromatic rings points to a unique Pd-πinteraction between Pd and frameworks consisting of mono-phenyl groups(C_6H_4).