Thioxanthone–carbazole as a visible light photoinitiator for free radical polymerization

A thioxanthone (TX) derivative with the additional carbazole chromophore, namely thioxanthone‐carbazole (TX‐C) was synthesized and characterized. The photophysical properties and its efficiency to polymerize methyl methacrylate both in the presence and absence of N,N‐dimethylaniline (DMA) as coinitiator was investigated and compared with that of the commercially available TX. TX‐C was found to display better photophysical properties and in both cases initiate polymerization more efficiently. Detailed real‐time Fourier transform infrared studies revealed that high polymerization rates can be obtained when TX‐C in conjunction with DMA was used. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Naphthodioxinone‐1,3‐benzodioxole as photochemically masked one‐component type II photoinitiator for free radical polymerization

A 1,3‐benzodioxole derivative of naphthodioxinone, namely 2‐(benzo[d][1,3]dioxol‐5‐yl)‐9‐hydroxy‐2‐phenyl‐4H‐naphtho[2,3‐d][1,3]dioxin‐4‐one was synthesized and characterized. Its capability to act as caged one‐component Type II photoinitiator for free radical polymerization was examined. Upon irradiation, this photoinitiator releases 5‐benzoyl‐1,3‐benzodioxole possessing both benzophenone and 1,3‐dioxole groups in the structure as light absorbing and hydrogen donating sites, respectively. Subsequent photoexcitation of the benzophenone chromophore followed by hydrogen abstraction generates radicals capable of initiating free radical polymerization of appropriate monomers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Poly(ethylene glycol)‐thioxanthone prepared by Diels–Alder click chemistry as one‐component polymeric photoinitiator for aqueous free‐radical polymerization

Novel water‐borne macrophotoinitiator containing thioxanthone (TX) end group was successfully synthesized by using Diels–Alder (DA) [4 + 2] click chemistry strategy. For this purpose, thioxanthone‐anthracene (TX‐A) and maleimide end‐functionalized poly(ethylene glycol) (PEG‐MI) were reacted in toluene at reflux temperature for 48 h. The final polymer (PEG‐TX) and the intermediates were characterized in detail by spectral analysis. PEG‐TX possesses absorption characteristics similar to the parent TX. The one‐component photoinitiating nature of the photointiator was demonstrated by photopolymeization of several hydrophilic vinyl monomers, such as acrylic acid, acrylamide, 2‐hydroxyethyl acrylate, and 1‐vinyl‐2‐pyrrolidone. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2109–2114, 2010     

p-Nitroacetanilide in the presence of triethylamine as a photoinitiator system for vinyl polymerization

The polymerization rate of methyl methacrylate photosensitized by p-nitroacetanilide in the presence of triethylamine was measured as a function of the amine and monomer concentrations. The polymerization proceeds readily in high-polarity media (acetonitrile/monomer) but is negligible in nonpolar media. The polymerization rate increases with the amine concentration up to 0.15M. Further increase in amine concentration does not change the polymerization rate. A similar behavior was observed for the photobleaching of the nitro compound. ESR studies show the formation of a nitro and an amine free radical, the latter free radical being the active species that adds to the monomer. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3095–3100, 1997     

Benzoin type photoinitiator for free radical polymerization

Benzoin, a popular photoinitiator for free radical polymerization of vinyl monomers, was improved by introduction of two methyl thioether substituents. This new benzoin derivative showed an about 50 times higher light absorption in the near‐UV spectral region and performed better than the unsubstituted benzoin in polymerization experiments in bulk solutions or films of acrylate monomers when low initiator concentrations are used. Laser flash photolysis, low temperature luminescence experiments and photoproduct studies by mass spectrometry suggest that a slow α‐cleavage mechanism (k_α = 2.2 × 10⁵ s^?1) from the electronic triplet state with a quantum yield of 0.1 is the primary photoreaction to generate the initiating free radicals. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Visible light‐emitting diode‐sensitive thioxanthone derivatives used in versatile photoinitiating systems for photopolymerizations

Novel thioxanthone (TX) derivatives are used as versatile photoinitiators upon visible light‐emitting diode (LED; e.g., 405, 425, and 450 nm) exposure. The mechanisms for the photochemical generation of reactive species (i.e., cations and free radicals) produced from photoinitiating systems based on the photoinitiator and an iodonium salt, tris(trimethylsilyl)silane, or an amine, were studied by UV–vis spectroscopy, fluorescence, cyclic voltammetry, steady‐state photolysis, and electron spin resonance spin‐trapping techniques. The reactive species are particularly efficient for cationic, free radical, hybrid, and thiol‐ene photopolymerizations upon LED exposure. The optimized photoinitiating systems exhibit higher efficiency than those of reference systems (i.e., isopropyl TX‐based photoinitiating systems), especially in the visible range. According to their beneficial features, these photoinitiating systems have considerable potential in photocuring applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 4037–4045     

Abilities of 1‐(9‐anthrylmethyloxy)‐2‐pyridone and related compounds to initiate radical and cationic photopolymerizations

This study explored the abilities of 1‐(9‐anthrylmethyloxy)‐2‐pyridone and related compounds, which absorb long‐wavelength light (>350 nm), to photochemically initiate radical and cationic polymerizations. It was found that the irradiation of the title compounds initiates the radical polymerization of styrene whereas the cationic polymerization of oxetane proceeds in the presence of these photoinitiators to a negligible extent. The behavior of 9‐anthrylmethyloxyl and amidyl radicals in the photopolymerization process of styrene was discussed based on ¹H NMR, UV, and fluorescence spectral data. In addition, the photoinitiation ability of the anthrylmethyloxyl end group was also investigated by using its model compound. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2859–2865, 2004     

Kinetic pathway investigations of three‐component photoinitiator systems for visible‐light activated free radical polymerizations

Three‐component photoinitiator systems generally include a light‐absorbing photosensitizer (PS), an electron donor, and an electron acceptor. To investigate the key factors involved with visible‐light activated free radical polymerizations involving three‐component photoinitiators and 2‐hydroxyethyl methacrylate, we used thermodynamic feasibility and kinetic considerations to study photopolymerizations initiated with either rose bengal or fluorescein as the PS. The Rehm–Weller equation was used to verify the thermodynamic feasibility for the photo‐induced electron transfer reaction. It was concluded that key kinetic factors for efficient visible‐light activated initiation process are summarized in two ways: (1) to retard back electron transfer and recombination reaction steps and (2) to use a secondary reaction step for consuming dye‐based radical and regenerating the original PS (dye). Using the thermodynamic feasibility and kinetic data, we suggest three different kinetic mechanisms, which are (i) photo‐reducible series mechanism, (ii) photo‐oxidizable series mechanism, and (iii) parallel‐series mechanism. Because the photo‐oxidizable series mechanisms most efficiently allow the key kinetic factors, this kinetic pathway showed the highest conversion and rate of polymerization. The kinetic data measured by near‐IR and photo‐differential scanning calorimeter verified that the photo‐oxidizable series mechanism provides the most efficient kinetic pathway in the visible‐light activated free radical polymerizations. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 887–898, 2009     

Initial step of anthracene‐sensitized photoacid generation from diphenyliodonium hexafluorophosphate in an epoxy matrix studied by steady‐state and laser‐flash photolyses

The anthracene‐sensitized photodecomposition of diphenyliodonium hexafluorophosphate was studied in an epoxy matrix. From steady‐state photolysis, the generation of protons, which are considered to be the actual initiators of the polymerization of epoxides, was confirmed. In addition, 9‐phenylanthracene was detected as a main product from anthracene. From time‐resolved laser‐flash photolysis, a broad absorption band with a peak at about 500 nm was observed that was thought to be due to the precursor of 9‐phenylanthracene. On the basis of these results, we propose electron transfer from anthracene in the excited singlet state to the diphenyliodonium cation as the initial step of photoacid generation. This process is followed by fast chemical reactions, which generate 9‐phenylanthracene and protons, and back electron transfer from the diphenyliodine radical to the anthracene cation radical. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2937–2946, 2001     

One‐component,double‐chromophoric thioxanthone photoinitiators for free radical polymerization

Two one‐component, double‐chromophoric thioxanthone photoinitiators, namely TX‐EDA and TX‐DETA were synthesized by the reaction of thioxanthone aldehyde (TX‐A) with ethylenediamine (EDA) and diethylenetriamine (DETA), respectively via a facile Schiff base reaction. Both photoinitiators were characterized by spectral analysis and photobleaching studies. DFT calculations are employed to reveal the contribution of the different orbitals to the excitation of the initiators. The double‐chromophoric nature of the initiators gives rise to an increased absorption in the near UV region when compared with the pristine TX‐A. Photoinitiated polymerization of various vinyl monomers with TX‐EDA and TX‐DETA has been investigated in the presence and absence of a co‐initiator and compared for formulations consisting of precursor TX‐A. In addition, real‐time FTIR spectroscopic studies were performed in methyl methacrylate polymerization with both initiators. The higher efficiency observed with TX‐DETA may be attributed to the additional hydrogen donating sites adjacent to nitrogen atoms. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3475–3482     

Synthesis of main chain polymeric benzophenone photoinitiator via thiol‐ene click chemistry and Its use in free radical polymerization

Main chain polymeric benzophenone photoinitiator (PBP) was synthesized by using “Thiol‐ene Click Chemistry” and characterized with ¹H NMR, FTIR, UV, and phosphorescence spectroscopies. PBP as a polymeric photoinitiator presented excellent absorption properties (ε₂₉₄ = 28,300 mol^?1L^?1cm^?1) compared to the molecular initiator BP (ε₂₅₂ = 16,600 mol^?1L^?1cm^?1). The triplet energy of PBP was obtained from the phosphorescence measurement in 2‐methyl tetrahydrofurane at 77 K as 298.3 kJ/mol and according to phosphorescence lifetime, the lowest triplet state of PBP has an n‐π* nature. Triplet–triplet absorption spectrum of PBP at 550 nm following laser excitation (355 nm) were recorded and triplet lifetime of PBP was found as 250 ns. The photoinitiation efficiency of PBP was determined for the polymerization of Hexanedioldiacrylate (HDDA) with PBP and BP in the presence of a coinitiator namely, N‐methyldiethanolamine (MDEA) by Photo‐DSC. The initiation efficiency of PBP for polymerization of HDDA is much higher than for the formulation consisting of BP. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and evaluation as a visible‐light polymerization photoinitiator of a new dye‐linked bis(trichloromethyl)‐1,3,5‐triazine

A dye‐linked initiator consisting of a merocyanine dye, which has an absorption maximum at 460 nm, and a substituted bis(trichloromethyl)‐1,3,5‐triazine initiator was prepared in order to achieve an efficient photopolymerization in a visible‐light region. The spectroscopic studies clearly showed that the dye‐linked initiator exhibit a marked increase in the efficiency of fluorescence quenching than a simple mixture of the dye/initiator. These results are reasonably explained in terms of the efficiency of electron transfer between the dye and the initiator. The relative photoinitiating efficiency of dye‐linked initiators in photopolymerization of acrylate monomers was evaluated and the results clearly indicated that the dye‐linked photoinitiator exhibited a marked increase in the photoinitiating efficiency of photopolymerization of acrylates compared to a simple mixture of the dye/initiator in photopolymer coatings particularly at a lower concentration of the initiator. This was explained in terms of the active quenching sphere of the dye/initiator system. Superior photosensitivity in the linked compound at a lower concentration indicates that this would be particularly useful as a visible‐light photoinitiator in holographic‐recording photopolymers. Copyright © 2004 John Wiley & Sons, Ltd.     

A benzophenone‐naphthalimide derivative as versatile photoinitiator of polymerization under near UV and visible lights

A benzophenone‐naphthalimide derivative (BPND) bearing tertiary amine groups has been developed as a high‐performance photoinitiator in combination with 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine or an iodonium salt for both the free radical polymerization (FRP) of acrylates and the cationic polymerization (CP) of epoxides upon exposure to near UV and visible LEDs (385–470 nm). BPND can even produce radicals without any added hydrogen donor. The photochemical mechanisms are studied by molecular orbital calculations, steady state photolysis, electron spin resonance spin trapping, fluorescence, cyclic voltammetry and laser flash photolysis techniques. These novel BPND based photoinitiating systems exhibit an efficiency higher than that of the well‐known camphorquinone‐based systems (FRP and CP) or comparable to that of bis(2,4,6‐trimethylbenzoyl)‐phenylphosphineoxide (FRP at λ ≤ 455 nm). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 445–451     

Diphenylphenacyl sulfonium salt as dual photoinitiator for free radical and cationic polymerizations

Diphenylphenacylsulfonium tetrafluoroborate (DPPS⁺BF^4–) salt possessing both phenacyl and sulfonium structural units was synthesized and characterized. DPPS⁺BF^4– absorbs light at relatively higher wavelengths. The direct and sensitized initiation activity of the salt in both cationic and free radical photopolymerizations was investigated and compared with that of its analogue triphenylsulfonium tetrafluoroborate (TPS⁺BF^4–). Differential scanning photocalorimetry and conventional gravimetric studies revealed that DPPS⁺BF^4– showed higher efficiency for direct and sensitized photopolymerizations of most of the monomers investigated. Although, principally both homolytic and/or heterolytic cleavage is possible, theoretical studies suggested that homolytic pathway is more favored for the generation of reactive initiating species. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 451–457     

Sequential photodecomposition of bisacylgermane type photoinitiator: Synthesis of block copolymers by combination of free radical promoted cationic and free radical polymerization mechanisms

A block copolymer of cyclohexene oxide (CHO) and styrene (St) was prepared by using bifunctional visible light photoinitiator dibenzoyldiethylgermane (DBDEG) via a two‐step procedure. The bifunctionality of the photoinitiator pertains to the sequential photodecomposition of DBDEG through acyl germane bonds. In the first step, photoinitiated free radical promoted cationic polymerization of CHO using DBDEG in the presence of diphenyliodonium hexafluorophosphate (Ph₂I⁺PF) was carried out to yield polymers with photoactive monobenzoyl germane end groups. These poly(cyclohexene oxide) (PCHO) prepolymers were used to induce photoinitiated free radical polymerization of styrene (St) resulting in the formation of poly(cyclohexene oxide‐block‐styrene) (P(CHO‐b‐St)). Successful blocking has been confirmed by a strong change in the molecular weight of the prepolymer and the block copolymer as well as NMR, IR, and DSC spectral measurements. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4793–4799, 2009     

(Thiocarbonyl‐α‐thio)carboxylic acid derivatives as transfer agents in reversible addition–fragmentation chain‐transfer polymerizations

Ethyl S‐(thiobenzoyl)thioacetate, ethyl S‐thiobenzoyl‐2‐thiopropionate, and S‐(thiobenzoyl)thioglycolic acid were used as chain‐transfer agents for the reversible addition–fragmentation chain‐transfer (RAFT) polymerizations of styrene, methyl methacrylate, and butyl acrylate. Of these polymerizations, only those of styrene and butyl acrylate with any of the transfer agents showed molecular weight control corresponding to controlled/living polymerizations. The best molecular weight control was observed for the polymerizations of styrene and butyl acrylate with ethyl (S)‐thiobenzoyl‐2‐thiopropionate. Semiempirical PM3 calculations were performed for the investigation of the relative heats of reaction of the chain‐transfer equilibria between the aforementioned chain‐transfer agents and dimer radicals of the three monomers. The molecular weight control of the polymerizations correlated with the stability trend of the leaving‐group radical of the chain‐transfer agent. This relatively simple computational model offered some value in determining which transfer agents would show the best molecular weight control in RAFT polymerizations. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 555–563, 2002; DOI 10.1002/pola.10143     

Visible‐light‐sensitive photoredox catalysis by iron complexes: Applications in cationic and radical polymerization reactions

The development of iron complexes for the photoredox catalysis is a huge challenge. Indeed, Iron complexes can be ideal candidates due to their potential visible light absorption and redox properties but also because they are less toxic, inexpensive and environmentally friendly compared to other catalysts. In the present paper, a series of novel iron complexes have been synthesized and utilized to initiate the free radical promoted cationic polymerization of epoxides or the free radical polymerization of acrylates through photoredox catalysis processes upon exposure to near UV (385 nm) or visible violet (405 nm) light emitting diodes (LEDs). When combined with an iodonium salt and N‐vinylcarbazole, the iron complex‐based photoinitiating systems are able to generate radicals, cations, and radical cations. The initiation efficiency is investigated through real‐time Fourier transform infrared spectroscopy and a satisfactory initiating ability is found. The mechanisms for the generation of the reactive initiating species through photoredox catalysis are studied by different methods (steady state photolysis, cyclic voltammetry and electron spin resonance spin trapping techniques) and discussed in detail. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2247–2253     

Photochemistry and photopolymerization activity of p-nitroaniline in the presence of N,N-dimethylaniline as a bimolecular photoinitiator system

The photoreduction behavior of p-nitroaniline (pNA) in the presence of N,N-dimethylaniline (DMA) induced by both steady-state (365 nm) and laser (337 nm) irradiation has been analyzed. The stoichiometry of the photoreduction reaction revealed that several amino radicals derived from DMA were generated by each photoreduced pNA molecule. The polymerization kinetics of the lauryl acrylate monomer (LA) photoinitiated by the pNA/DMA system has been studied by differential scanning photocalorimetry (Photo-DSC). The rate of polymerization was found to be proportional to the square root of both the incident light and the coinitiator DMA concentration. The order of the polymerization reaction with respect to monomer and initiator concentration was determined, as well as the polymerization behavior under aerobic conditions. The polymerization efficiency of this photoinitiated system was much higher than that obtained with conventional aromatic ketone photoinitiators. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3801–3812, 1997     

A photo‐oxidizable kinetic pathway of three‐component photoinitiator systems containing porphrin dye (Zn‐tpp), an electron donor and diphenyl iodonium salt

A series of kinetic experiments were conducted involving visible‐light activated free radical polymerizations with three‐component photoinitiators and 2‐hydroxyethyl methacrylate (HEMA). Three‐component photoinitiator systems generally include a light‐absorbing photosensitizer (PS), an electron donor and an electron acceptor. To compare kinetic efficiency, we used thermodynamic feasibility and measured kinetic data. For this study, 5,10,15,20‐tetraphenyl‐21H,23H‐porphyrin zinc (Zn‐tpp) and camphorquinone (CQ) were used as the PSs. The Rehm‐Weller equation was used to verify the thermodynamic feasibility for the photo‐induced electron transfer reaction. Using the thermodynamic feasibility, we suggest two different kinetic mechanisms, which are (i) photo‐reducible series mechanism of CQ and (ii) photo‐oxidizable series mechanism of Zn‐tpp. Kinetic data were measured by near‐IR spectroscopy and photo‐differential scanning calorimetry based on an equivalent concentration of excited state PS. We report that the photo‐oxidizable series mechanism using Zn‐tpp produced dramatically enhanced conversions and rates of polymerizations compared with those associated with the photo‐reducible series mechanism using CQ. It was concluded from the kinetic results that the photo‐oxidizable series mechanism efficiently retards back electron transfer and the recombination reaction step. In addition, the photo‐oxidizable series mechanism provides an efficient secondary reaction step that involves consumption of the dye‐based radical and regeneration of the original PS. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3131–3141, 2009