A Three-dimensional Covalent Organic Framework for CO2 Uptake and Dyes Adsorption

Environmental pollution is one of the most severe problems facing today, including water pollution and the greenhouse effect. Therefore, developing materials with high-efficiency dyes adsorption and CO₂ uptake is significant. Covalent organic frameworks(COFs), as a burgeoning class of crystalline porous polymers, present a promising application potential in areas related to pollution regulation due to their exciting surface properties. Herein, we report a 3D COF with a high specific surface area(BET about 2072 m²/g) by utilizing tetrahedral and rectangle building blocks connected through[4+4] imine condensation reactions to synthesize. The obtained COF not only can separate dyes from water effectively but also shows a remarkable CO₂ uptake capacity. This research thus provides a promising material to remove dyes and adsorb CO₂ in environmental remediation.     

A Novel Electrochemical Sensor Based on Copper‐based Metal‐Organic Framework for the Determination of Dopamine

A glassy carbon electrode (GCE) modified with a copper‐based metal‐organic framework (MOF) [HKUST‐1, HKUST‐1 = Cu₃(BTC)₂ (BTC = 1,3,5‐benzenetricarboxylicacid)] was developed as a highly sensitive and simple electrochemical sensor for the determination of dopamine (DA). The MOF was prepared by a hydrothermal process, and the morphology and crystal phase of the MOF were characterized by scanning electron microscopy (SEM) and X‐ray diffraction (XRD), respectively. Meanwhile, the electrochemical performance was investigated using cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). Under optimized conditions, the modified electrode showed excellent electrocatalytic activity and high selectivity toward DA. The linear response range was from 5.0 × 10⁻⁷ to 1.0 × 10⁻⁴ M and the detection limit was as low as 1.5 × 10⁻⁷ M. Moreover, the electrochemical sensor was used to detect DA in real samples with excellent results. MOF‐based sensors hold great promise for routine sensing applications in the field of electrochemical sensing.     

Preparation and Gas Separation Properties of Metal‐Organic Framework Membranes

Continuous and intergrown metal‐organic framework (MOF) membranes, MIL‐100(In) (MIL represents Materials Institute Lavoisier), were prepared directly on porous anodic alumina oxide (AAO) membranes using an in situ crystallization method. The pore surface of MIL‐100(In) is conferred with polarity due to the presence of the 1, 3,5‐benzenetricarboxylic acid. The thickness of MIL‐100(In) membranes was tuned by varying the reactant concentration of indium chloride and 1, 3,5‐benzenetricarboxylic acid. Single gas permeation measurements on this MOF membrane indicate the large permeances of 0.90 × 10^–6 and 0.81 × 10^–6 mol · m^–2·s^–1·Pa^–1 for CO₂ and CH₄, and relatively high ideal selective factors of 3.75 and 3.38 for CO₂/N₂ and CH₄/N₂, respectively.     

Synthesis,Structure, and Magnetic Properties of a Copper(II) Metal‐Organic Framework with Biphenyl‐2,2′,4,4′‐tetracarboxylic Acid

The 2D Cu^II metal‐organic framework [Cu₂(bptc)(H₂O)₄]_n · 4nH₂O ( 1 ) (H₄bptc = biphenyl‐2,2′,4,4′‐tetracarboxylic acid) was hydrothermally synthesized and characterized by single‐crystal X‐ray diffraction and magnetic measurements. In the structure, bptc^4– serves as a twisted Π‐shaped organic building block to connect paddlewheel [Cu₂(COO)₄] dinuclear units and mononuclear units through 2‐/2′‐carboxylate and 4‐/4′‐carboxylate, respectively. According to the magnetic analysis using a dimer‐plus‐monomer model, strong antiferromagnetic coupling is operative within the dinuclear unit (J = –311 cm^–1 based on H = –J S ₁ S ₂), and the compound behaves like a mononuclear molecule at low temperature.     

A Redox‐Active 2D Metal–Organic Framework for Efficient Lithium Storage with Extraordinary High Capacity

Metal–organic framework cathodes usually exhibit low capacity and poor electrochemical performance for Li‐ion storage owing to intrinsic low conductivity and inferior redox activity. Now a redox‐active 2D copper–benzoquinoid (Cu‐THQ) MOF has been synthesized by a simple solvothermal method. The abundant porosity and intrinsic redox character endow the 2D Cu‐THQ MOF with promising electrochemical activity. Superior performance is achieved as a Li‐ion battery cathode with a high reversible capacity (387 mA h g^?1), large specific energy density (775 Wh kg^?1), and good cycling stability. The reaction mechanism is unveiled by comprehensive spectroscopic techniques: a three‐electron redox reaction per coordination unit and one‐electron redox reaction per copper ion mechanism is demonstrated. This elucidatory understanding sheds new light on future rational design of high‐performance MOF‐based cathode materials for efficient energy storage and conversion.     

A Novel Bismuth‐Based Metal–Organic Framework for High Volumetric Methane and Carbon Dioxide Adsorption

Solvothermal reaction of H₄L (L=biphenyl‐3,3′,5,5′‐tetracarboxylate) and Bi(NO₃)₃ ? (H₂O)₅ in a mixture of DMF/MeCN/H₂O in the presence of piperazine and nitric acid at 100 °C for 10 h affords the solvated metal–organic polymer [Bi₂(L)_1.5(H₂O)₂] ? (DMF)_3.5 ? (H₂O)₃ (NOTT‐220‐solv). A single crystal X‐ray structure determination confirms that it crystallises in space group P2/c and has a neutral and non‐interpenetrated structure comprising binuclear {Bi₂} centres bridged by tetracarboxylate ligands. NOTT‐220‐solv shows a 3,6‐connected network having a framework topology with a {4 ? 6²}₂{4² ? 6⁵ ? 8⁸}{6² ? 8} point symbol. The desolvated material NOTT‐220a shows exceptionally high adsorption uptakes for CH₄ and CO₂ on a volumetric basis at moderate pressures and temperatures with a CO₂ uptake of 553 g L^?1 (20 bar, 293 K) with a saturation uptake of 688 g L^?1 (1 bar, 195 K). The corresponding CH₄ uptake was measured as 165 V(STP)/V (20 bar, 293 K) and 189 V(STP/V) (35 bar, 293 K) with a maximum CH₄ uptake for NOTT‐220a recorded at 20 bar and 195 K to be 287 V(STP)/V, while H₂ uptake of NOTT‐220a at 20 bar, 77 K is 42 g L^?1. These gas uptakes have been modelled by grand canonical Monte Carlo (GCMC) and density functional theory (DFT) calculations, which confirm the experimental data and give insights into the nature of the binding sites of CH₄ and CO₂ in this porous hybrid material.     

Encapsulation of 5‐Fluorouracil in a Copper(II)‐based Porous Metal‐organic Framework: Drug Delivery and Inhibiting Human Spinal Cord Tumor Cells

Solvothermal reaction of a semirigid tricarboxylic acid with Cu(NO₃)₂ · 3H₂O gives rise to a robust microporous metal‐organic framework with the formula {[Cu₂(OH)bcb](DMF)₂(H₂O)₃}_n ( 1 ) [H₃bcb = 3,5‐bis((4′‐carboxylbenzyl)‐oxy)benzoic acid, DMF = N,N‐dimethylformamide]. Its structure was determined by single‐crystal X‐ray diffraction analysis and further characterized by elemental analysis, powder X‐ray diffraction (PXRD), and thermogravimetric (TG) analyses. The efficient encapsulation of an anticancer drug 5‐fluorouracil (5‐Fu) on the desolvated 1 ( 1a ) was studied by both grand canonical Monte Carlo (GCMC) simulation and drug release experiments. In addition, in vitro anticancer activity of compounds 1 and 5‐Fu loaded 1a were also evaluated using MTT assay.     

A 3D Luminescent Metal‐organic Framework Constructed from Cu4I4 Cubane Clusters and Triangular Imidazole Ligand

Abstract . The solvothermal reaction between cuprous iodide and the rigid triangular imidazole ligand in mixed N,N′‐dimethylacetamide (DMA)‐acetonitrile solvent leads to the isolation of the 3D metal‐organic framework [(Cu₄I₄)₃(TIPA)₄] · 7DMA ( 1 ) [TIPA = tri(4‐imidazolylphenyl) amine], which was characterized by elemental analysis, IR spectroscopy, powder X‐ray diffraction, and single‐crystal X‐ray diffraction. Topologically, the structure of 1 is an unprecedented 3,3,4,4‐connected net with a point symbol of {4.8.10}₂{4.8²}₂{4².8².10²}₂{8⁴.12²}. Compound 1 exhibits orange‐red photoluminescence with an emission maximum at 622 nm at room temperature.     

A New Three‐dimensional Metal‐organic Framework based on Dinuclear Rare Earth Cluster and Olsalazine

A new microporous metal organic frameworks Eu₂(olz)₃ · 7(DMF), based on olsalazine, has been successfully designed and synthesized. Eu‐olz has three‐dimensional structure with dinuclear rare earth cluster and drug molecule olsalazine as ligand, and features as low toxic MOF materials. The Eu‐olz exhibits weak fluorescent emission which can be ascribed to the luminescence of the organic ligand.     

Selective CO2 Adsorption in a Supramolecular Organic Framework

Considering the rapidly rising CO₂ level, there is a constant need for versatile materials which can selectively adsorb CO₂ at low cost. The quest for efficient sorptive materials is still on since the practical applications of conventional porous materials possess certain limitations. In that context, we designed, synthesized, and characterized two novel supramolecular organic frameworks based on C‐pentylpyrogallol[4]arene (PgC₅) with spacer molecules, such as 4,4′‐bipyridine (bpy). Highly optimized and symmetric intermolecular hydrogen‐bonding interactions between the main building blocks and comparatively weak van der Waals interactions between solvent molecules and PgC₅ leads to the formation of robust extended frameworks, which withstand solvent evacuation from the crystal lattice. The evacuated framework shows excellent affinity for carbon dioxide over nitrogen and adsorbs ca. 3 wt % of CO₂ at ambient temperature and pressure.     

Advances of Metal‐Organic Frameworks in Energy and Environmental Applications

Nowadays, energy shortage and environmental pollution issues are increasingly severe and urgent to be solved. The effective storage and use of environmentally friendly fuels and removal of harmful gases from the environment are great challenges and of great importance both for the environment protection and for human health. Porous metal‐organic frameworks (MOFs) are highly ordered crystalline materials formed by the self‐assembly process of metal ions and organic ligands. Their good features such as ultrahigh porosity, large surface area, structural diversity and functionalities make them promising candidates for applications in energy and environmental fields. MOF thin films and MOF composites have also been investigated to further enhance the properties and introduce new functionalities. This review provides an overview of the synthesis methods of pristine MOFs, MOF thin films and MOF composites, and significant advances of MOFs in energy and environment applications such as energy storage (H₂, CH₄), CO₂ capture and separation, adsorption removal and sensing of harmful gases in the environment.     

Tuning of Microenvironment in Covalent Organic Framework via Fluorination Strategy promotes Selective CO2 Capture

Herein, we have designed and synthesized two heteroatom (N, O) rich covalent organic frameworks (COF), PD-COF and TF-COF , respectively, to demonstrate their relative effect on CO₂ adsorption capacity and also CO₂/N₂ selectivity. Compared to the non-fluorinated PD-COF (BET surface area 805 m² g⁻¹, total pore volume 0.3647 ccg⁻¹), a decrease in BET surface area and also pore volume have been observed for fluorinated TF-COF due to the incorporation of fluorine to the porous framework (BET surface area 451 m² g⁻¹, total pore volume 0.2978 ccg⁻¹). This fact leads to an enormous decrease in the CO₂ adsorption capacity and CO₂/N₂ selectivity of TF-COF , though it shows stronger affinity towards CO₂ with a Qst of 37.76 KJ/mol. The more CO₂ adsorption capacity by PD-COF can be attributed to the large specific surface area with considerable amount of micropore volume compared to the TF-COF . Further, PD-COF exhibited CO₂/N₂ selectivity of 16.8, higher than that of TF-COF (CO₂/N₂ selectivity 13.4).     

The Role of Multiwall Carbon Nanotubes in Cu‐BTC Metal‐Organic Frameworks for CO2 Adsorption

The discovery of natural gas fields with a high content of CO₂ in world gas reservoirs poses new challenges for CO₂ capture. This work investigates the use of the metal‐organic framework (MOF) Cu‐BTC and hybrid MWCNTs@Cu‐BTC for CO₂ adsorption. Cu‐BTC and hybrid MWCNTs@Cu‐BTC were synthesized by the solvothermal method. The results of imaging of intact MOF pores in Cu‐BTC and hybrid MWCNTs@Cu‐BTC nanocrystals by high‐resolution transmission electron microscopy (HRTEM) under liquid nitrogen conditions are presented. Physical characterizations of the solid adsorbents were made by using a selection of different techniques, including field‐emission scanning electron microscopy (FESEM), X‐ray powder diffraction (XRD), Fourier transform infrared (FT‐IR) spectroscopy, thermogravimetric analysis (TGA), Brunauer–Emmet–Teller (BET) surface area, and CO₂ adsorption and physisorption measurements. HRTEM and FESEM confirmed that Cu‐BTC has an octahedral shape and that the surface morphology of Cu‐BTC changes by the intercalation of MWCTNs. The results show that the modified Cu‐BTC improved the CO₂ adsorption compared to pure Cu‐BTC. The increase in the CO₂ uptake capabilities of hybrid MWCNTs@Cu‐BTC was ascribed to the intercalation of MWCNTs with Cu‐BTC crystals. The CO₂ sorption capacities of Cu‐BTC and hybrid MWCNTs@Cu‐BTC were found to increase from 1.91701 to 3.25642 mmol/g at ambient conditions.     

Oriented Synthesis of One‐Dimensional Polypyrrole Molecule Chains in a Metal‐Organic Framework

We report for the first time the preparation of single polypyrrole (PPy) molecule chains using a “metal‐organic framework” with 1 nm channels as a template. The obtained one‐dimensional (1‐D) PPy has highly structure order and excellent conductivity, which has improved by as much as five orders of magnitude in comparison with that of 2‐D PPy.

     

A Versatile CuII Metal–Organic Framework Exhibiting High Gas Storage Capacity with Selectivity for CO2: Conversion of CO2 to Cyclic Carbonate and Other Catalytic Abilities

A linear tetracarboxylic acid ligand, H₄L, with a pendent amine moiety solvothermally forms two isostructural metal–organic frameworks (MOFs) L_M (M=Zn^II, Cu^II). Framework L_Cu can also be obtained from L_Zn by post‐ synthetic metathesis without losing crystallinity. Compared with L_Zn , the L_Cu framework exhibits high thermal stability and allows removal of guest solvent and metal‐bound water molecules to afford the highly porous, L_Cu′ . At 77 K, L_Cu′ absorbs 2.57 wt % of H₂ at 1 bar, which increases significantly to 4.67 wt % at 36 bar. The framework absorbs substantially high amounts of methane (238.38 cm³ g^?1, 17.03 wt %) at 303 K and 60 bar. The CH₄ absorption at 303 K gives a total volumetric capacity of 166 cm³ (STP) cm^?3 at 35 bar (223.25 cm³ g^?1, 15.95 wt %). Interestingly, the NH₂ groups in the linker, which decorate the channel surface, allow a remarkable 39.0 wt % of CO₂ to be absorbed at 1 bar and 273 K, which comes within the dominion of the most famous MOFs for CO₂ absorption. Also, L_Cu′ shows pronounced selectivity for CO₂ absorption over CH₄, N₂, and H₂ at 273 K. The absorbed CO₂ can be converted to value‐added cyclic carbonates under relatively mild reaction conditions (20 bar, 120 °C). Finally, L_Cu′ is found to be an excellent heterogeneous catalyst in regioselective 1,3‐dipolar cycloaddition reactions (“click” reactions) and provides an efficient, economic route for the one‐pot synthesis of structurally divergent propargylamines through three‐component coupling of alkynes, amines, and aldehydes.     

Extraordinary NO2 Removal by the Metal–Organic Framework UiO‐66‐NH2

Here we discuss the removal of nitrogen dioxide, an important toxic industrial chemical and pollutant, from air using the MOF UiO‐66‐NH₂. The amine group is found to substantially aid in the removal, resulting in unprecedented removal capacities upwards of 1.4 g of NO₂ /g of MOF. Furthermore, whereas NO₂ typically generates substantial quantities of NO on sorbents, the amount generated by UiO‐66‐NH₂ is significantly reduced. Of particular significance is the formation of a diazonium ion on the aromatic ring of the MOF, and the potential reduction of NO₂ to molecular nitrogen.