In situ polymerization and morphology of polypyrrole obtained in water‐soluble polymer templates

Several water‐soluble polymers were used as templates for the in situ polymerization of pyrrole to determine their effect on the generation of nanosized polypyrrole (PPy) particles. The polymers used include: polyvinyl alcohol (PVA), polyethylene oxide (PEO), poly(vinyl butyral), polystyrene sulfonic acid, poly(ethylene‐alt‐maleic anhydride) (PEMA), poly(octadecene‐alt‐maleic anhydride), poly(N‐vinyl pyrrolidone), poly(vinyl butyral‐co‐vinyl alcohol‐co‐vinyl acetate), poly(N‐isopropyl acrylamide), poly(ethylene oxide‐block‐propylene oxide), hydroxypropyl methyl cellulose, and guar gum. The oxidative polymerization of pyrrole was carried out with FeCl₃ as an oxidant. The morphology of PPy particles obtained after drying the resulting aqueous dispersions was examined by optical microscopy, and selected samples were further analyzed via atomic force microscopy. Among the template polymers, PVA was the most efficient in generating stable dispersions of PPy nanospheres in water, followed by PEO and PEMA. The average size of PPy nanospheres was in the range of 160 nm and found to depend on the molecular weight and concentration of PVA. Model reactions and kinetics of the polymerization reaction of pyrrole in PVA were carried out by hydrogen ¹H NMR spectroscopy using ammonium persulfate as an oxidant. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Growth of aligned polypyrrole acicular nanorods and their application as Pt‐free semitransparent counter electrode in dye‐sensitized solar cell

Polypyrrole films on fluorine doped tin oxide (FTO)‐coated glass substrate were prepared in situ by placing FTO/glass substrates where pyrrole was polymerized by methyl orange‐ferric chloride complex. The atomic force microscopy image indicated growth of acicular nanorods of polypyrrole. These films exhibited catalytic activity towards I₃⁻/I⁻ redox couple and have been investigated for counter electrode application in dye‐sensitized solar cell (DSSC). The fabricated DSSC with N719 dye/TiO₂ as photoanode, and PPy/FTO as counter electrode shows ~1.7% efficiency.     

Ethylene polymerization by novel Ziegler–Natta‐type catalysts obtained in situ by the oxidative addition of 8‐hydroxyquinoline‐based ligands to bis(1,5‐cyclooctadiene)nickel(0) and methylaluminoxane

Novel catalytic systems, prepared in situ by the oxidative addition of 8‐hydroxyquinoline ligands to bis(1,5‐cyclooctadiene)nickel(0) and activated by methylaluminoxane, were studied in ethylene polymerization. When 8‐hydroxyquinoline was employed, only oligomeric products were obtained. On the contrary, 5,7‐dinitro‐8‐hydroxyquinoline gave linear polyethylene (PE), but with a modest activity. For the catalyst based on 5‐nitro‐8‐hydroxyquinoline, the productivity was largely dependent on the content of free trimethylaluminum (TMA) present in the commercial aluminoxane. The progressive optimization of the TMA/oligomeric methylaluminoxane ratio increased the productivity, which reached 700 kg of PE/(mol of Ni × h), by an order of magnitude. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 200–206, 2006     

Synthesis of poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyl groups and its further initiation of the grafting polymerization of styrene

A new stratagem for the synthesis of amphiphilic graft copolymers of hydrophilic poly(ethylene oxide) as the main chain and hydrophobic polystyrene as the side chains is suggested. A poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyls [poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide)] was first prepared by the anionic ring‐opening copolymerization of ethylene oxide and 4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl, and then the graft copolymerization of styrene was completed with benzoyl peroxide as the initiator in the presence of poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide). The polymerization of styrene was under control, and comblike, amphiphilic poly(ethylene oxide)‐g‐polystyrene was obtained. The copolymer and its intermediates were characterized with size exclusion chromatography, ¹H NMR, and electron spin resonance in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3836–3842, 2006     

Homopolymerizations and random copolymerizations of olefins with amino‐substituted cyclopentadienylchromium complexes

1‐(2‐N,N‐Dimethylaminoethyl)‐2,3,4,5‐tetramethylcyclopentadienyl‐chromium dichloride ( 1 ), (2‐N,N‐dimethylaminoethyl)cyclopentadienylchromium dichloride ( 6 ), and (2‐N,N‐dimethylaminoethyl)indenylchromium dichloride ( 7 ) in the presence of modified methylaluminoxane exhibit high catalytic activities for the polymerization of ethylene with random copolymerizations of ethylene with propylene, ethylene with 1‐hexene, and propylene with 1‐hexene. These initiators conduct polymerizations to give high molecular weight polymers with low polydispersities. However, the stereoregularities are very poor in these reactions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2759–2771, 2002     

Ethylene polymerization by the new chromium catalysts based on amino‐pyrrolide ligands

A series of amino‐pyrrolide ligands ( 1–4a ) and their derivatives amino‐thiophene ligand ( 5a ), amino‐indole ligand ( 6a ) were prepared. Chromium catalysts, which were generated in situ by mixing the ligands with CrCl₃(thf)₃ in toluene, were tested for ethylene polymerization. The preliminary screening results revealed that the tridentate amino‐pyrrolide ligands containing soft pendant donor, 3a, 4a /CrCl₃(thf)₃ systems displayed high catalytic activities towards ethylene polymerization in the presence of modified methyaluminoxane. The electronic and steric factors attached to the ligand backbone significantly affected both the catalyst activity and the polymer molecular weight. Complex 4b was obtained by the reaction of CrCl₃(thf)₃ with one equivalent of the lithium salts of 4a , which was the most efficient ligand among the tested ones. The effect of polymerization parameters such as cocatalyst concentration, ethylene pressure, reaction temperature, and time on polymerization behavior were investigated in detail. The resulting polymer obtained by 4b display wax‐like and possess linear structure, low molecular weight, and unimodal distribution. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 713–721, 2009     

Homogeneous tandem catalysis of the bis‐(diphenylphosphino)‐amine/chromium tetramerization catalyst with metallocene catalysts

Homogeneous tandem catalysis of the bis(diphenylphoshino)amine‐chromium oligomerization catalyst with the metallocenes Ph₂C(Cp)(9‐Flu)ZrCl₂ and rac‐EtIn₂ZrCl₂, is discussed. GC, CRYSTAF, and ¹³C NMR analysis of the products obtained from reactions at constant temperatures show that during tandem catalysis, α‐olefins, mainly 1‐hexene and 1‐octene, are produced from ethylene by the oligomerization catalyst and subsequently built into the polyethylene chain. At 40 °C the Cr/PNP catalyst acts as a tetramerization catalyst while the polymerization catalyst activity is low. Copolymerization of ethylene and the in situ produced α‐olefins have also been carried out by increasing the temperature from 40 °C, where primarily oligomerization takes place, to above 100 °C, where polymerization becomes dominant. The melting temperature of the polymer is dependent on the catalyst and cocatalyst ratios as well as on the temperature gradient followed during the reaction, while the presence of the oligomerization catalyst reduces the activity of the polymerization catalyst. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6847–6856, 2006     

Design of PEO‐based ruthenium carbene for aqueous metathesis polymerization. Synthesis by the “macromonomer method” and application in the miniemulsion metathesis polymerization of norbornene

Novel water‐soluble ruthenium carbene complexes with finely tuned structure and properties in solution are reported. These ruthenium‐based initiators were found to exhibit great catalytic activity in aqueous miniemulsion ring‐opening metathesis polymerization of norbornene. Stable particles of polynorbornene could be generated in the 200–250 nm size range stabilized with a nonionic surfactant (polystyrene‐b‐poly(ethylene oxide)). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2784–2793, 2006     

Rapid metal‐free macromolecular coupling via In Situ nitrile oxide‐activated alkene cycloaddition

Nitrile oxide 1,3 dipolar cycloaddition is a simple and powerful coupling methodology. However, the self‐dimerization of nitrile oxides has prevented the widespread use of this strategy for macromolecular coupling. By combining an in situ nitrile oxide generation with a highly reactive activated dipolarophile, we have overcome these obstacles and present a metal‐free macromolecular coupling strategy for the modular synthesis of several ABA triblock copolymers. Nitrile oxides were generated in situ from chloroxime terminated poly(dimethylsiloxane) B‐blocks and coupled with several distinct hydrophilic (poly(2‐methyloxazoline) and poly(ethylene glycol)), and poly(N‐isopropylacrylamide) or hydrophobic (poly(l ‐lactide) A‐blocks terminated in activated dipolarophiles in a rapid fashion with high yield. This methodology overcomes many drawbacks of previously reported metal‐free methods due to its rapid kinetics, versatility, scalability, and ease of introduction of necessary functionality. Nitrile oxide cycloaddition should find use as an attractive macromolecular coupling strategy for the synthesis of biocompatible polymeric nanostructures. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3134–3141     

Polymer electrolyte membranes by in situ polymerization of poly(ethylene carbonate‐co‐ethylene oxide) macromonomers in blends with poly(vinylidene fluoride‐co‐hexafluoropropylene)

Salt‐containing membranes based on polymethacrylates having poly(ethylene carbonate‐co‐ethylene oxide) side chains, as well as their blends with poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐HFP), have been studied. Self‐supportive ion conductive membranes were prepared by casting films of methacrylate functional poly(ethylene carbonate‐co‐ethylene oxide) macromonomers containing lithium bis(trifluorosulfonyl)imide (LiTFSI) salt, followed by irradiation with UV‐light to polymerize the methacrylate units in situ. Homogenous electrolyte membranes based on the polymerized macromonomers showed a conductivity of 6.3 × 10^?6 S cm^?1 at 20 °C. The preparation of polymer blends, by the addition of PVDF‐HFP to the electrolytes, was found to greatly improve the mechanical properties. However, the addition led to an increase of the glass transition temperature (T_g) of the ion conductive phase by ～5 °C. The conductivity of the blend membranes was thus lower in relation to the corresponding homogeneous polymer electrolytes, and 2.5 × 10^?6 S cm^?1 was recorded for a membrane containing 10 wt % PVDF‐HFP at 20 °C. Increasing the salt concentration in the blend membranes was found to increase the T_g of the ion conductive component and decrease the propensity for the crystallization of the PVDF‐HFP component. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 79–90, 2007     

Ethylene polymerization by chromium complexes with phosphorous‐bridged bisphenoxy ligand

Chromium catalysts combined with phosphorous‐bridged bisphenoxy ligands were found to be highly active for ethylene polymerization. The most efficient catalyst precursor among them, generated by combining bis[3‐tert‐butyl‐5‐methyl‐2‐hydroxyphenyl](phenyl)phosphine hydrochloride ( 1a ) and CrCl₃(THF)₃, was characterized. X‐ray analysis of (3‐tert‐butyl‐5‐methyl‐2‐phenoxy)(3‐tert‐butyl‐5‐methyl‐ 2‐hydroxyphenyl)(phenyl)phosphine bis(tetrahydrofuran)chromium dichloride ( 6 ), obtained by the reaction of 1a and CrCl₃(THF)₃ in the presence of NaH, revealed a unique structure in which one phenol moiety of the bisphenol did not coordinate to the chromium center. Complex 6 showed higher activities than those observed in the in situ catalyst system. Polyethylene of various molecular weights was obtained with differing activators. The highest activity (113.5 kg mmol (cat)^?1 h^?1) was observed when TIBA/TB was used as a cocatalyst. A medium molecular weight polymer with narrow molecular weight distribution (M_w = 128,700, M_w/M_n = 1.8) was obtained using a 6 ‐TIBA/B(C₆F₅)₃ system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3668–3676, 2007     

Novel antimicrobial polyethylene composites prepared by metallocenic in situ polymerization with TiO2‐based nanoparticles

Polyethylene (PE) composites with titanium oxide (TiO₂) nanoparticles were produced via in situ polymerization representing a novel route to obtain antimicrobial polymeric materials. The TiO₂ nanoparticles synthesized by the sol–gel method were used either as‐synthesized or modified organically with hexadecyltrimethoxysilane (Mod‐TiO₂). These particles were added, together with the catalytic system (formed by a metallocenic catalyst and methylaluminoxane as cocatalyst), directly to the reactor, yielding in situ PE composites with 2 and 8 wt % content of nanofiller. The catalytic polymerization activity presented a slight decrease with the incorporation of the TiO₂ and Mod‐TiO₂ nanoparticles compared to polymerization without filler. Regarding the properties of the composites, crystallinity increased slightly when the different nanofillers were added, and the elastic modulus increased around 15% compared to neat PE. PE/TiO₂ nanocomposites containing 8 wt % of TiO₂ exposed to UVA irradiations presented antimicrobial activity against Escherichia coli. The PE/Mod‐TiO₂ nanocomposite with 8 wt % filler killed 99.99% of E. coli, regardless of light and time irradiation. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A novel optically active diblock copolymer composed of poly(ethylene glycol) and poly[N‐{o‐(4‐phenyl‐4,5‐dihydro‐1,3‐oxazol‐2‐yl)phenyl}maleimide]: Synthesis,micellization behavior,and chiroptical property

A series of optically active amphiphilic block copolymers were synthesizedby using potassium alkoxide of poly(ethylene glycol) monomethyl ether (MeOPEGO^?K⁺) to initiate the anionic polymerization of N‐{o‐(4‐phenyl‐4,5‐dihydro‐1,3‐oxazol‐2‐yl)phenyl}maleimide [(R)‐PhOPMI]. The PEG‐macroinitiators generated in situ in the reaction between MeOPEGOH and potassium naphthylide in tetrahydrofuran. The synthetic procedure may provide the PEG‐b‐PPhOPMI copolymers with well‐defined structure, as evidenced by gel permeation chromatography, ¹H NMR, FTIR, and elemental analysis. In particular, the preparation of block copolymers having a laevorotation or dextrorotation activity was accomplished by changing the feed composition. The micellization was examined for the amphiphilic block copolymers in aqueous milieu by fluorescence spectroscopy, dynamic light scattering, and circular dichroism. The results indicate that the copolymers could form regular spherical micelles with core‐shell structure when the hydrophilic component was long enough; in contrast, the copolymers containing shorter PEG segments formed aggregates in large dimension due to the considerable interaction between hydrophobic PPhOPMI components. Also, it was found that the aggregated structure of the polymeric micelles is strongly dependent on the medium nature and the polymer concentration. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1025–1033, 2008     

New chiral α‐diimine nickel(II) complexes bearing ortho‐sec‐phenethyl groups for ethylene polymerization

A series of new α‐diimine nickel(II) catalysts bearing bulky chiral sec‐phenethyl groups have been synthesized and characterized. The molecular structure of representative chiral ligand, bis[N,N′‐(4‐methyl‐2,6‐di‐sec‐phenethylphenyl)imino]‐1,2‐dimethylethane rac‐1c and chiral complexes, {bis[N,N′‐(4‐methyl‐2‐sec‐phenethylphenyl)imino]‐2,3‐butadiene}dibromidonickel rac‐2a and bis{bis[N,N′‐(4‐methyl‐2‐sec‐phenethylphenyl)imino]‐2,3‐butadiene}dibromidonickel rac‐2b, were confirmed by X‐ray crystallographic analysis. Complex rac‐2c bearing two chiral sec‐phenethyl groups in the ortho‐aryl position and a methyl group in the para‐aryl position, activated by diethylaluminum chloride (DEAC), showed highly catalytic activity for the polymerization of ethylene [4.12 × 10⁶ g PE (mol Ni.h.bar)^?1], and produced highly branched polyethylenes under low ethylene pressure (branching degree: 104, 118 and 126 branches/1000 C at 20, 40 and 60°C, respectively). Chiral 20‐electron bis‐α‐diimine Ni(II) complex rac‐2b also exhibited high activity toward ethylene polymerization [1.71 × 10⁶ g PE (mol Ni · h · bar)^?1]. The type and amount of branches of the polyethylenes obtained were determined by ¹H and ¹³C NMR. Copyright © 2013 John Wiley & Sons, Ltd.     

Hyperbranched bisphosphinoamine ligands: synthesis,characterization and application in ethylene oligomerization

Two hyperbranched bisphosphinoamine (PNP) ligands and chromium complexes were synthesized in good yield with 1.0 generation (1.0 G) hyperbranched macromolecules, chlorodiphenylphosphine (Ph₂PCl) and CrCl₃(THF)₃ as raw materials. The hyperbranched PNP ligands and chromium complexes were characterized by FT-IR, ¹H NMR, ³¹P NMR, UV and ESI-MS. Comparing with the chromium complexes, the hyperbranched PNP ligands, in combination with Cr(III), and activation by methylaluminoxane (MAO) in situ generated species with better catalytic performance for ethylene oligomerization. The effect of solvent, chromium source, ligand/Cr molar ratio, reaction temperature, Al/Cr molar ratio and reaction pressure on the catalytic activity and product selectivity were studied. The results showed that with increase of ligand/Cr molar ratio, reaction temperature and Al/Cr molar ratio, the catalytic activity increased at first and then decreased. However, the catalytic activity continuously increased with increase of reaction pressure. Under the optimized conditions, the catalytic system of hyperbranched PNP/Cr(III)/MAO led to catalytic activity of 2.68 × 10⁵ g/(mol Cr·h) and 37.71% selectivity for C₆ and C₈.     

Synthesis of amphiphilic copolymer brushes: Poly(ethylene oxide)‐graft‐polystyrene

A well‐defined amphiphilic copolymer brush with poly(ethylene oxide) as the main chain and polystyrene as the side chain was successfully prepared by a combination of anionic polymerization and atom transfer radical polymerization (ATRP). The glycidol was first protected by ethyl vinyl ether to form 2,3‐epoxypropyl‐1‐ethoxyethyl ether and then copolymerized with ethylene oxide by the initiation of a mixture of diphenylmethylpotassium and triethylene glycol to give the well‐defined polymer poly(ethylene oxide‐co‐2,3‐epoxypropyl‐1‐ethoxyethyl ether); the latter was hydrolyzed under acidic conditions, and then the recovered copolymer of ethylene oxide and glycidol {poly(ethylene oxide‐co‐glycidol) [poly(EO‐co‐Gly)]} with multiple pending hydroxymethyl groups was esterified with 2‐bromoisobutyryl bromide to produce the macro‐ATRP initiator [poly(EO‐co‐Gly)_(ATRP). The latter was used to initiate the polymerization of styrene to form the amphiphilic copolymer brushes. The object products and intermediates were characterized with ¹H NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, Fourier transform infrared, and size exclusion chromatography in detail. In all cases, the molecular weight distribution of the copolymer brushes was rather narrow (weight‐average molecular weight/number‐average molecular weight < 1.2), and the linear dependence of ln[M₀]/[M] (where [M₀] is the initial monomer concentration and [M] is the monomer concentration at a certain time) on time demonstrated that the styrene polymerization was well controlled. This method has universal significance for the preparation of copolymer brushes with hydrophilic poly(ethylene oxide) as the main chain. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4361–4371, 2006     

Synthesis of ultra‐high‐molecular‐weight ethylene‐propylene copolymer via quasi‐living copolymerization with N‐heterocyclic carbene ligated vanadium complexes

The quasi‐living copolymerization of ethylene with propylene was achieved by using N‐heterocyclic carbene (NHC) ligated vanadium complex ( V3 , VOCl₃[1,3‐(2,6‐ⁱPr₂C₆H₃)₂(NCH?)₂C:]) due to the stabilization of active center by the introduction of bulky and electron rich NHC ligand with bulky isopropyl substituents at the ortho positions of the phenyl rings. The weight‐average molecular weight (M_w) of the resulting copolymer increases linearly with its weight in 20 min. The ultra‐high‐molecular‐weight (UHMW) ethylene‐propylene copolymer (M_w = 1612 kg mol^?1) can be synthesized with V3 /Et₃Al₂Cl₃ catalytic system. The novel complex V4′ (VCl₃[1,3‐(2,4,6‐Me₃C₆H₂)₂(NCH?)₂C:]·2THF) was constructed by the introduction of two coordinated tetrahydrofuran molecules and decrease in steric hindrance at the ortho positions of phenyl rings. The UHMW ethylene‐propylene copolymer (M_w = 1167 kg mol^?1) can also be synthesized by using V4′ /Et₃Al₂Cl₃ catalytic system. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 553–561     

Influence of Process Parameters on the Reaction Kinetics of the Chromium‐Catalyzed Trimerization of Ethylene

In this paper we report the results of an extensive experimental kinetic study carried out on the novel ethylene trimerization catalyst system, comprising the chromium source [CrCl₃(thf)₃] (thf=tetrahydrofuran), a Ph₂P‐N(iPr)‐P(Ph)‐N(iPr)H (PNPNH) ligand (Ph=phenyl, iPr=isopropyl), and triethylaluminum (AlEt₃) as activator. It could be shown that the initial activity shows a first‐order dependency on the ethylene concentration. Also, a first‐order dependency was found for the catalyst concentration. The initial activity follows a typical Arrhenius behavior with an experimentally determined activation energy of 52.6 kJ mol^?1. At elevated temperatures (ca. 80 °C), a significant deactivation was observed, which can be tentatively traced back to a ligand rearrangement in the presence of AlEt₃. After a fast initial phase, a pronounced ‘kink’ in the ethylene‐uptake curve is observed, followed by a slow, almost linear, further increase of the total ethylene consumption. The catalyst composition, in particular the ligand/chromium and the cocatalyst/chromium molar ratio, has a strong impact on the catalytic performance of the trimerization of ethylene.     

Optimized water‐based ATRP of an anionic monomer: Comprehension and properties characterization

The effect of pH and the ligand nature over the atom transfer radical polymerization (ATRP) of the anionic monomer sodium 2‐acrylamido‐2‐methylpropanesulfonate (AMPSNa) was investigated in aqueous medium by using ω‐halogenated poly(ethylene oxide) and CuBr, as macroinitiator and catalyst, respectively. The stability of both catalytic complexes and macroinitiator was investigated in function of pH, that is, fixed between 7.5 and 12. UV‐VIS spectroscopy confirmed a good catalytic complex stability in the studied conditions. Hydrolysis of the macroinitiator ester group at pH higher than 7.5 was detected by ¹H NMR and GPC, yielding ill‐defined polymer samples when ATRP is performed in alkaline conditions. 2,2′‐Bipyridyl (Bpy), 1,1,4,7,10,10‐hexamethyltriethylenetetramine (HMTETA), and tris(2‐methylaminoethyl)amine (Me₆‐TREN)‐based complexes were compared at the optimal pH (pH 7.5). When polymerization was carried out in the presence of CuBr · 2Me₆‐TREN complex block copolymers with narrow molecular weight distribution (1.1 ≤ M _W/M _n ≤ 1.3), and good agreement between theoretical and experimental molar masses was obtained. Moreover, increasing the PAMPSNa polymerization degrees (n) did not affect the control over the polymerization. Preliminary characterization of the diblock copolymers behavior in aqueous medium revealed a strong polyelectrolyte effect independently of n. Interestingly, occurrence of interactions between the PEO and PAMPSNa‐blocks was also evidenced by differential scanning calorimetry and thermogravimetric analyses. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1108–1119, 2009     

Bis(2‐(6‐methylpyridin‐2‐yl)‐benzimidazolyl)titanium dichloride and titanium bis(6‐benzimidazolylpyridine‐2‐carboxylimidate): Synthesis,characterization, and their catalytic behaviors for ethylene polymerization

A series of 6‐(benzimidazol‐2‐yl)‐N‐organylpyridine‐2‐carboxamide were synthesized and transformed into 6‐benzimidazolylpyridine‐2‐carboxylimidate as dianionic tridentate ligands. Bis(2‐(6‐methylpyridin‐2‐yl)‐benzimidazolyl)titanium dichloride ( C1 ) and titanium bis(6‐benzimidazolylpyridine‐2‐carboxylimidate) ( C2 – C8 ) were synthesized in acceptable yields. These complexes were systematically characterized by elemental and NMR analyses. Crystallographic analysis revealed the distorted octahedral geometry around titanium in both complexes C1 and C4 . Using MAO as cocatalyst, all complexes exhibited from good to high catalytic activities for ethylene polymerization. The neutral bis(6‐benzimidazolylpyridine‐2‐carboxylimidate)titanium ( C2 – C8 ) showed high catalytic activities and good stability for prolonged reaction time and elevated reaction temperature; however, C1 showed a short lifetime in catalysis as being observed at very low activity after 5 min. The elevated reaction temperature enhanced the productivity of polyethylenes with low molecular weights, whereas the reaction with higher ethylene pressure resulted in better catalytic activity and resultant polyethylenes with higher molecular weights. At higher ratio of MAO to titanium precursor, the catalytic system generated better activity with producing polyethylenes with lower molecular weights. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3411–3423, 2008