Comparative study of capsaicin molecularly imprinted polymers prepared by different polymerization methods

In this study, the molecularly imprinted polymers (MIPs) of capsaicin are prepared by bulk polymerization (MIPs1), precipitation polymerization (MIPs2), and surface imprinting technology based on SiO₂/Fe₃O₄ particles (MIPs3), respectively. MIPs are characterized by scanning electron microscopy and fourier transform infrared spectroscopy. The adsorption kinetics and thermodynamics of these composites are also investigated to estimate their capacity to rebind capsaicin. The adsorption kinetics show that the adsorption process of MIPs1 is fitted to pseudo first‐order kinetic model, while the kinetic properties of MIPs2 and MIPs3 are well described by pseudo second‐order kinetic model. Adsorption thermodynamics analysis indicated that there are two kinds of binding sites with different affinity in each MIPs, whereas only one kind of binding site in non‐imprinted polymers. All adsorption isotherms of MIPs are fitted to Freundlich models, illustrated that binding sites are distributed heterogeneously in the surface of the materials, and the adsorption might occur in the multimolecular layers. Comparisons of experimental data of three MIPs are achieved and the results show that MIPs3 has the best affinity and absorption capacity to capsaicin. Moreover, the MIPs3 maintain the magnetic properties of Fe₃O₄ particles, which will be applied to the rapid separation of capsaicin from chili peppers samples. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 157–164     

Synthesis of a molecularly imprinted polymer on mSiO2@Fe3O4 for the selective adsorption of atrazine

Atrazine contamination of water is of considerable concern because of the potential hazard to human health. In this study, a magnetic molecularly imprinted polymer for atrazine was prepared by the surface‐imprinting technique using Fe₃O₄ as the core, mesoporous silica as the carrier, atrazine as the template, and itaconic acid as the functional monomer. The magnetic molecularly imprinted polymer was characterized by Fourier‐transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, and vibration‐sample magnetometry. The binding properties of the magnetic molecularly imprinted polymer toward atrazine were investigated by adsorption isotherms, kinetics, and competitive adsorption. It was found that the adsorption equilibrium was achieved within 2 h, the maximum adsorption capacity of atrazine was 8.8 μmol/g, and the adsorption process could be well described by the Langmuir isotherm model and pseudo‐second‐order kinetic model. The magnetic molecularly imprinted polymer exhibited good adsorption selectivity for atrazine with respect to structural analogues, such as cyanazine, simetryne, and prometryn. The reusability of the magnetic molecularly imprinted polymer was demonstrated for at least five repeated cycles without a significant decrease in adsorption capacity. These results suggested that the magnetic molecularly imprinted polymer could be used as an efficient material for the selective adsorption and removal of atrazine from water samples.     

Via protoporphyrin to the synthesis of levofloxacin‐imprinted polymer

A new molecularly imprinted polymer (MIP) for levofloxacin was prepared by the combined use of methacrylic acid and protoporphyrin as functional monomers. The adsorption properties of resultant imprinted polymers were evaluated by equilibrium rebinding experiments. The highest binding capacity of levofloxacin achieved from the optimized imprinted polymer in acetonitrile was 246.26 µmol/g with an imprinting factor of 2.05. A ?uorescence quenching effect was observed when a protoporphyrin‐based imprinted polymer was incubated in the solutions of levofloxacin. The results indicated that the protoporphyrin‐based MIPs were able to create higher binding cavities for template compared with MIPs using only methacrylic acid as a functional monomer. It should be expected that the cooperative use of the protoporphyrin with supplemental different functional monomers may be an alternative to obtain MIP with the improvement of the selectivity. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation of magnetic molecularly imprinted polymer nanoparticles by surface imprinting by a sol–gel process for the selective and rapid removal of di‐(2‐ethylhexyl) phthalate from aqueous solution

Magnetic molecularly imprinted polymer nanoparticles for di‐(2‐ethylhexyl) phthalate were synthesized by surface imprinting technology with a sol–gel process and used for the selective and rapid adsorption and removal of di‐(2‐ethylhexyl) phthalate from aqueous solution. The prepared magnetic molecularly imprinted polymer nanoparticles were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, and vibrating sample magnetometry. The adsorption of di‐(2‐ethylhexyl) phthalate onto the magnetic molecularly imprinted polymer was spontaneous and endothermic. The adsorption equilibrium was achieved within 1 h, the maximum adsorption capacity was 30.7 mg/g, and the adsorption process could be well described by Langmuir isotherm model and pseudo‐second‐order kinetic model. The magnetic molecularly imprinted polymer displayed a good adsorption selectivity for di‐(2‐ethylhexyl) phthalate with respect to dibutyl phthalate and di‐n‐octyl phthalate. The reusability of magnetic molecularly imprinted polymer was demonstrated for at least eight repeated cycles without significant loss in adsorption capacity. The adsorption efficiencies of the magnetic molecularly imprinted polymer toward di‐(2‐ethylhexyl) phthalate in real water samples were in the range of 98–100%. These results indicated that the prepared adsorbent could be used as an efficient and cost‐effective material for the removal of di‐(2‐ethylhexyl) phthalate from environmental water samples.     

Highly selective separation and detection of cyromazine from seawater using graphene oxide based molecularly imprinted solid‐phase extraction

A novel molecularly imprinted polymer based on graphene oxide was prepared as a solid‐phase extraction adsorbent for the selective adsorption and extraction of cyromazine from seawater samples. The obtained graphene oxide molecularly imprinted polymer and non‐imprinted polymer were nanoparticles and characterized by scanning electron microscopy. The imprinted polymer showed higher adsorption capacity and better selectivity than non‐imprinted polymer, and the maximum adsorption capacity was 14.5 mg/g. The optimal washing and elution solvents for molecularly imprinted solid phase extraction procedure were 2 mL of acetonitrile/water (80:20, v/v) and methanol/acetic acid (70:30, v/v), respectively. The recoveries of cyromazine in the spiked seawater samples were in the range of 90.3–104.1%, and the relative standard deviation was <5% (n = 3) under the optimal procedure and detection conditions. The limit of detection of the proposed method was 0.7 μg/L, and the limit of quantitation was 2.3 μg/L. Moreover, the imprinted polymer could keep high adsorption capacity for cyromazine after being reused six times at least. Finally, the synthesized graphene oxide molecularly imprinted polymer was successfully used as a satisfied sorbent for high selectivity separation and detection of cyromazine from seawater coupled with high‐performance liquid chromatography.     

2-异戊基环戊酮虚拟模板印迹微球的制备及其吸附性能

以2-异戊基环戊酮为虚拟模板,采用沉淀聚合法制备了粒径20~50 μm的分子印迹微球。 用傅里叶变换红外光谱(FTIR)和扫描电子显微镜(SEM)研究了分子印迹微球的表面化学特征及粒径分布,测试了印迹聚合物对玫瑰醚的吸附动力学、等温吸附性能及吸附选择性。 考察了分子印迹固相萃取玫瑰醚的应用效能。 结果表明:分子印迹聚合物(MIPs)对玫瑰醚的吸附可在25 min达到平衡,具有较快的吸附动力学,一级动力学模型更适合描述其吸附动力学行为。 Freundlich模型最适合描述MIPs对玫瑰醚的等温吸附行为,聚合物材料最大的印迹位点数目为149.3 μmol/g。 聚合物对玫瑰醚的平均吸附能为166 kJ/mol,表明主要为化学吸附。 虚拟模板印迹聚合物对玫瑰醚的选择因子相对于香叶醇和香茅醇分别为3.710和5.636,且对含玫瑰醚的混合物中的目标化合物仍具有较高的选择吸附能力(竞争吸附量为18.02 mg/g)。 在优化洗涤(1 mL乙腈+1 mL乙腈和水混合溶剂(体积比9.5:0.5)+2 mL乙腈、甲醇和水混合溶剂(体积比8:1:2)和洗脱(3 mL甲醇和醋酸混合溶剂(体积比9:1))条件下,通过分子印迹固相萃取可实现玫瑰醚的有效分离和富集,回收率为96.23%。     

Binding characteristics of molecularly imprinted polymers based on fungicides in hydroalcoholic media

An iprodione‐imprinted polymer was prepared by copolymerization of methacrylamide and ethylene glycol dimethacrylate using a noncovalent imprinting approach. Methacrylamide was chosen using molecular dynamics simulations. To concentrate iprodione from hydro‐alcoholic solutions, batch sorption of iprodione on the imprinted polymer were conducted. The equilibrium time for iprodione sorption is 20 min, and the corresponding kinetic mechanism follows the pseudo‐second order indicating a strong interaction between iprodione and the imprinted polymer. Langmuir, Freundlich, and Dubinin–Radushkevich models were used to fit the isotherm of iprodione sorption. The imprinted polymer was found to be more efficient than the nonimprinted polymer for the uptake of iprodione, as revealed by its higher adsorption energy, affinity, and capacity. Finally, a selectivity study was conducted on the imprinted and the nonimprinted polymers to sorb three fungicides. It shows that the imprinted polymer could be used as a preconcentration phase in a multiresidue analysis of fungicides in hydroalcoholic medium.     

Selective separation of lambdacyhalothrin by porous/magnetic molecularly imprinted polymers prepared by Pickering emulsion polymerization

Porous/magnetic molecularly imprinted polymers (PM‐MIPs) were prepared by Pickering emulsion polymerization. The reaction was carried out in an oil/water emulsion using magnetic halloysite nanotubes as the stabilizer instead of a toxic surfactant. In the oil phase, the imprinting process was conducted by radical polymerization of functional and cross‐linked monomers, and porogen chloroform generated steam under the high reaction temperature, which resulted in some pores decorated with easily accessible molecular binding sites within the as‐made PM‐MIPs. The characterization demonstrated that the PM‐MIPs were porous and magnetic inorganic–polymer composite microparticles with magnetic sensitivity (M_s = 0.7448 emu/g), thermal stability (below 473 K) and magnetic stability (over the pH range of 2.0–8.0). The PM‐MIPs were used as a sorbent for the selective binding of lambdacyhalothrin (LC) and rapidly separated under an external magnetic field. The Freundlich isotherm model gave a good fit to the experimental data. The adsorption kinetics of the PM‐MIPs was well described by pseudo‐second‐order kinetics, indicating that the chemical process could be the rate‐limiting step in the adsorption of LC. The selective recognition experiments exhibited the outstanding selective adsorption effect of the PM‐MIPs for target LC. Moreover, the PM‐MIPs regeneration without significant loss in adsorption capacity was demonstrated by at least four repeated cycles.     

Synthesis and characterization of azoxystrobin hydrophilic molecularly imprinted microspheres

Abstract

In this research, hydrophilic molecularly imprinted microspheres (HMIPs) for azoxystrobin were successfully synthesized through precipitation polymerization. The adsorption capacities of HMIPs for azoxystrobin in water medium were higher than ordinary molecularly imprinted microspheres (MIPs), and HMIPs exhibited good hydrophilic properties. HMIPs and non-imprinted microspheres (HNIPs) were characterized by FT-IR, SEM, laser particle size analyzer and TGA. Comparing with HNIPs, azoxystrobin had a significant influence on morphologys and sizes of HMIPs. The Langmuir adsorption isotherm illustrated each binding site of HMIPs had the same adsorption capacity. The Lagergran pseudo-second-order kinetic model indicated the adsorption process between azoxystrobin and HMIPs was chemical adsorption. BET test illustrated HMIPs had bigger specific surface areas than HNIPs. Selective adsorption indicated that HMIPs had highly specific recognition of azoxystrobin. HMIPs successfully exhibited high selectivity and high hydrophilicity in water medium.     

Citrinin selective molecularly imprinted polymers for SPE

Molecularly imprinted polymers (MIPs) for citrinin (Cit) with 1‐hydroxy‐2‐naphthoic acid (HNA) as mimic template were prepared and the molecularly imprinted SPE method was developed for the detection of Cit in rice with HPLC. The adsorption properties of HNA and Cit on the MIPs and nonimprinted polymers were investigated. It proved that MIPs showed higher selectivity adsorption to HNA and Cit than nonimprinted polymers were. The recoveries of Cit in rice were in the range of 86.7–97.7%. The spiked rice samples and five rice samples in Beijing market were detected using molecularly imprinted SPE method and satisfied results were obtained as discussed in this article.     

Poly(amino acid)-based thermoresponsive molecularly imprinted magnetic nanoparticles for specific recognition and release of lysozyme

In this study, poly(amino acid)-based thermoresponsive molecularly imprinted magnetic nanoparticles for recognition and release of lysozyme was prepared via surface imprinting method. For constructing the molecularly imprinted polymer (MIP) layer, amino acid-based thermoresponsive monomer (N-methacryloyl-l-alanine methyl ester, MA-L-Ala-OMe) was mainly selected for the functional monomer along with N,N′-methylenebis(acrylamide) as the crosslinker. The resultant magnetic MIP nanoparticles were characterized in detail. Meanwhile, the dynamic light scattering studies and swelling ratios measurements were carried out for demonstrating the thermoresponsive property of the imprinted nanoparticles. The prepared magnetic MIP nanoparticles showed good adsorption capacity and selective recognition properties to lysozyme. Moreover, the fast adsorption process could reach equilibrium within 15 min. Importantly, the capture and release of lysozyme could be easily realized simply by altering the temperature of aqueous solution. Furthermore, the prepared imprinted nanoparticles were applied to separate lysozyme from the real egg white samples. The results proved that the thermoresponsive MIPs based on MA-L-Ala-OMe have great potential for selectively enriching target proteins in real samples.     

Preparation of a novel lysozyme molecularly imprinted polymer using uniformly sized functionalized poly(glycidyl methacrylate) microspheres as the matrix and its application to lysozyme purification

A novel lysozyme imprinted polymer based on uniformly sized functionalized poly(glycidyl methacrylate) microspheres has been synthesized in aqueous solution using the surface imprinting technique. The microspheres were modified with hydroxyl ethyl methacrylate to allow for the introduction of polymerizable double bonds, with β‐cyclodextrin and acrylamide being grafted onto the surface as functional monomers. The selective recognition properties of the resulting molecularly imprinted polymers (MIPs) were investigated by HPLC. Various factors were also investigated in terms of their influence on the retention behaviors of the imprinted polymers, including the pH and salt concentration of the mobile phase. The binding capability properties of the MIPs were evaluated, and the P_GMA/EDMA‐MIPs showed a high adsorption capacity for lysozyme. Furthermore, this MIP was used to separate and enrich lysozyme from egg whites. The results revealed that the lysozyme surface‐modified MIP could be used to efficiently separate and purify lysozyme from egg whites. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and Evaluation of Molecularly Imprinted Polymers as Sorbents for Selective Extraction of Coumarins

Coumarin, 7-hydroxycoumarin and dicoumarol molecularly imprinted polymers (MIP) were synthesized by bulk polymerization. Methacrylic acid and 4-vinylpyridine were tested as functional monomers and methanol, ethanol, acetonitrile, toluene and chloroform were tested as porogens. The binding capabilities of the imprinted polymers were assessed by equilibrium binding analysis. Highest binding capacity was obtained for MIP prepared for the template 7-hydroxycoumarin synthesized in methacrylic acid as functional monomer, chloroform as porogen and methanol/water as analyte solvent. Scanning electron microscopy analysis documented its appropriate morphology. ATR-FTIR spectra confirmed successful polymerization of MIP. Coumarin structural analogues were employed to evaluate the polymer selectivity and it was found that polymer prepared for 7-hydroxycoumarin was selective for its template molecule. Kinetic studies showed relatively fast adsorption of analytes to MIPs (1 h). Rebinding properties of MIPs were evaluated by adsorption isotherms. The calculated data fitted well with experimental data showing that Freundlich isotherm is suitable for modelling the adsorption of tested coumarins on prepared MIPs. Applicability of polymer prepared for 7-hydroxycoumarin was tested for the selective extraction of coumarins from the sample of chicory.     

Tailor‐made ion‐imprinted polymer based on functionalized graphene oxide for the preconcentration and determination of trace copper in food samples

A tailor‐made Cu(II) ion‐imprinted polymer based on large‐surface‐area graphene oxide sheets has been synthesized for the preconcentration and determination of trace copper from food samples by solid‐phase extraction. Attributed to the ultrahigh surface area and hydrophilicity of graphene oxide, the Cu(II) ion‐imprinted polymer prepared by the surface ion‐imprinting technique exhibited a high binding capacity and a fast adsorption rate under the optimized experimental conditions. In the static adsorption experiments, the maximum adsorption capacity of Cu(II) ion‐imprinted polymer is 109.38 mg/g at 25°C, which is much higher than that of the nonimprinted polymer (32.12 mg/g). Meanwhile, the adsorption is very rapid and equilibrium is reached after approximately 30 min. The adsorption mechanism is found to follow Langmuir adsorption model and the pseudo‐second‐order adsorption process. The Cu(II) ion‐imprinted polymer was used for extracting and detecting Cu(II) in food samples combined with graphite flame atomic adsorption spectrometry with high recoveries in the range of 97.6–103.3%. The relative standard deviation and limit of detection of the method were evaluated as 1.2% and 0.37 μg/L, respectively. The results showed that the novel absorbent can be utilized as an effective material for the selective enrichment and determination of Cu(II) from food samples.     

Efficient synthesis of molecularly imprinted polymers with bio‐recognition sites for the selective separation of bovine hemoglobin

We developed a facile approach to the construction of bio‐recognition sites in silica nanoparticles for efficient separation of bovine hemoglobin based on amino‐functionalized silica nanoparticles grafting by 3‐aminopropyltriethoxylsilane providing hydrogen bonds with bovine hemoglobin through surface molecularly imprinting technology. The resulting amino‐functionalized silica surface molecularly imprinted polymers were characterized using scanning electron microscope, transmission electronic microscopy, Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and thermogravimetric analysis. Results showed that the as‐synthesized imprinted polymers exhibited spherical morphology and favorable thermal stability. The binding adsorption experiments showed that the imprinted polymers can reach equilibrium within 1 h. The Langmuir isotherm and pseudo‐second‐order kinetic model fitted the adsorption data well. Meanwhile, the imprinted polymers possessed a maximum binding capacity up to 90.3 mg/g and highly selectivity for the recognition of bovine hemoglobin. Moreover, such high binding capacity and selectivity retained after eight cycles, indicating the good stability and reusability of the imprinted polymers. Finally, successful application in the selective recognition of bovine hemoglobin from a real bovine blood sample indicated that the imprinted polymers displayed great potentials in efficient purification and separation of target proteins.     

Preparation and characterization of a novel molecularly imprinted polymer for the separation of glycyrrhizic acid

Molecularly imprinted polymers of glycyrrhizic acid were prepared by solution polymerization using glycyrrhizic acid as the template molecule, N‐vinypyrrolidone as functional monomer, N ,N‐methylene bisacrylamide as cross‐linker and ascorbic acid and hydrogen peroxide as initiators. Focused on the adsorption capacity and separation degree of the polymer to glycyrrhizic acid, the effects of the monomers, crosslinker and initiators were investigated and optimized. Finally, the structure of the polymer was characterized by using Fourier transform infrared spectroscopy and scanning electron microscopy. To obtain objective results, non‐imprinted molecular polymers prepared under the same conditions were also characterized. The adsorption quantity of the polymer was measured by high‐performance liquid chromatography. Under the optimum conditions, the maximum adsorption capacity of glycyrrhizic acid approached 15 mg/g, and the separation degree was as high as 2.5. The adsorption kinetics could be well described by a pseudo‐first‐order model, while the thermodynamics of the adsorption process could be described by the Langmuir model.     

Surface molecular imprints of WGA lectin as artificial receptors for mass-sensitive binding studies

Wheat germ agglutinin (WGA) lectin is a model compound for the interaction between viruses and cells during infection events and thus an interesting analyte for mass-sensitive sensing to study these interaction phenomena. Scanning tunneling microscopy studies reveal that surface molecular imprinting leads to cavities having the dimensions of WGA dimers. These reincorporate WGA from phosphate-buffered saline between 1 and 160 μg/ml. Whereas the quartz crystal microbalance (QCM) frequency for molecularly imprinted polymer (MIP)-coated electrodes decreases, indicating uptake of the analyte, their nonimprinted counterparts yield positive, concentration-dependent frequency shifts characteristic for slip of the analyte on the QCM surface. The MIPs achieve selectivity factors towards bovine serum albumin of roughly 4 at higher protein concentrations. Brunauer-Emmett-Teller analysis reveals that binding is favored by 29 kJ/mol until the adsorption of up to ten monolayers on the MIP, whereas above this range the value is lower. Together with the binding behavior of MIP and nonimprinted polymers, this indicates that the MIP acts as a nucleus for multilayer deposition onto the surface.     

Recognition of Staphylococcus enterotoxin via molecularly imprinted beads

The synthesis of molecularly imprinted beads for the recognition of the protein Staphylococcus enterotoxin B (SEB) is described. Two kinds of organic silane (3-aminopropyltrimethoxysilane (APTMS) and octyltrimethoxysilane (OTMS)) were polymerized on the surface of polystyrene microspheres after the SEB template was covalently immobilized by forming imine bonds. The resulting imprinted beads were selective for SEB. The Langmuir adsorption models were applied to describe the equilibrium isotherms. The results showed that an equal class of adsorption was formed in the molecularly imprinted polymer (MIP) with the maximum adsorption capacity of 3.86 mg SEB/g imprinted beads. The MIP has much higher adsorption capacity for SEB than the nonimprinted polymer, and the MIP beads have a higher selectivity for the template molecule.     

Voltammetric response of diclofenac-molecularly imprinted film modified carbon electrodes

A voltammetric sensor for the determination of diclofenac was developed, based on the molecular recognition of the analyte by molecularly imprinted methacrylate-ethyleneglycol dimethacrylate co-polymers. Pre-polymerisation solutions were deposited onto the surface of a glassy carbon electrode and a polymer film was obtained after spin coating control of thickness and in situ thermal polymerisation. After the template extraction from the resultant film, re-binding of diclofenac is performed from acetonitrile solutions containing the analyte. The amount of bonded diclofenac was then evaluated by differential pulse voltammetry in different electrolytes. The best results were obtained in 0.025 M citrate solution pH 6 containing 10% of acetonitrile. This medium favours the release of diclofenac from the polymer binding sites. In this way, the voltammetric transduction of the molecular recognition event is achieved. Voltammetric selectivity measurements revealed negligible interferences from diclofenac family of anti-inflammatory drugs, such as niflumic or meclofenamic acids.     

Chitosan-Based Surface Molecularly Imprinted Polymer Microspheres for Sustained Release of Sinomenine Hydrochloride in Aqueous Media

The surface molecular imprinting technique has been proposed as a prospective strategy for template molecule recognition and separation by devising the recognition sites on the surface of imprinted materials. The purpose of this study was to establish a novel drug delivery system which was developed by surface molecular imprinting method using β-cyclodextrin (β-CD)-grafted chitosan (CS) (CS-g-β-CD) microspheres as matrix and sinomenine hydrochloride (SM) as the template molecule. By adjusting the amount of functional monomer and cross-linking agent, we got the more excellent adsorption of CS-g-β-CD molecularly imprinted polymers (MIPs-CS-g-β-CD). When the amount of functional monomer was 6 mmol and cross-linking agent was 20 mmol, the maximum binding capacity of MIPs and non-imprinted polymers (NIPs) was 55.9 mg/g and 37.2 mg/g, respectively. The results indicated that the recognition of SM with MIPs was superior to NIPs. The adsorption isotherms of MIPs-CS-g-β-CD indicated that the adsorption behavior fitted better to the Langmuir model, which showed that the adsorption process of polymer was monomolecular layer. In in vitro drug release studies, the accumulative release amount of MIPs-CS-g-β-CD was up to 78% within 24 h. MIPs exhibited an excellent controlled SM release profile without burst release and the mechanism of SM release was shown to conform to non-Fick diffusion. Therefore, MIPs-CS-g-β-CD were successfully applied to extraction of SM and used as the materials for drug delivery system.