The engineering and immobilization of penicillin G acylase onto thermo‐sensitive tri‐block copolymer system

In this work, the relationships between catalytic performances of penicillin G acylase (PGA) and the molar ratio of carrier, thermo‐sensitive tri‐block polymer, poly (N,N‐diethylacrylamide‐b‐ β‐hydroxyethyl methacrylate‐b‐glycidyl methacrylate) (PDEA‐b‐PHEMA‐b‐PGMA) were studied firstly, and result documented the optimal molar ratio was n_DEA:n_HEMA:n_GMA = 100:47:24, which presented a suitable lower critical solution temperature (LCST) of 35°C and the activity retention ratio of 80.62% (±0.50%). Based on the suitable carrier, immobilization conditions were investigated and optimized. When pH of solution, concentration of PGA, immobilized time, and immobilization temperature were 8.0, 1/10 (m/v), 16 hours, and 36°C, respectively, enzyme loading capacity (L), enzyme activity (Ea), and activity retention ratio (Ar) of PGA arrived at the highest value of 21 223 U, 16 199 U/g, and 93.50% (±0.50%), respectively. Besides, the response rate (Rr) of immobilized PGA was the same as free PGA, the reusable stability (Rs) was 77.00% (±1.00%) after using for 11 times, which indicated that the carrier has better compatibility with L, Ar, Rs, and Rr.     

Polyisobutylene‐b‐Poly(N,N‐diethylacrylamide) well‐defined amphiphilic diblock copolymer: Synthesis and thermo‐responsive phase behavior

Polyisobutylene‐b‐poly(N,N‐diethylacrylamide) (PIB‐b‐PDEAAm) well‐defined amphiphilic diblock copolymers were synthesized by sequential living carbocationic polymerization and reversible addition‐fragmentation chain transfer (RAFT) polymerization. The hydrophobic polyisobutylene segment was first built by living carbocationic polymerization of isobutylene at ?70 ° C followed by multistep transformations to give a well‐defined (M_w/M_n = 1.22) macromolecular chain transfer agent, PIB‐CTA. The hydrophilic poly(N,N‐diethylacrylamide) block was constructed by PIB‐CTA mediated RAFT polymerization of N,N‐diethylacrylamide at 60 ° C to afford the desired well‐defined PIB‐b‐PDEAAm diblock copolymers with narrow molecular weight distributions (M_w/M_n ≤1.26). Fluorescence spectroscopy, transmission electron microscope, and dynamic light scattering (DLS) were employed to investigate the self‐assembly behavior of PIB‐b‐PDEAAm amphiphilic diblock copolymers in aqueous media. These diblock copolymers also exhibited thermo‐responsive phase behavior, which was confirmed by UV‐Vis and DLS measurements. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1143–1150     

Synthesis and characterization of double thermo‐responsive block copolymer consisting N‐isopropylacrylamide by atom transfer radical polymerization

In this thesis, we studied the convenient synthesis and characterizations of thermo‐responsive materials with double response. To achieve these, AB‐type diblock copolymers comprising of poly(N‐isopropylacrylamide) (NIPAAm) segment and poly(NIPAAm‐co‐(N‐(hydroxymethyl)acrylamide) (HMAAm)) one were designed. That was synthesized in one‐pot using an atom transfer radical polymerization (ATRP) technique. Poly(NIPAAm‐co‐HMAAm)s synthesized separately showed sensitive thermo‐response and the cloud point was completely tunable by the composition of HMAAm. As expected, the block copolymers exhibited double thermo‐responsive profiles in aqueous solution. The responsive behavior was discussed by precise trace by ¹H NMR and turbidity measurements. From these results, we could confirm almost independent dehydration of each segment. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6142–6150, 2008     

Ionic thermo‐responsive copolymer with multi LCST values: easy and fast LCST‐change through anion exchange

An ionic thermo‐responsive copolymer with multiple lower critical solution temperatures (multi‐LCSTs) has been developed, and the multi‐LCSTs were easily changeable according to the various counter anion types. The multi‐LCST values were achieved by introducing an ionic segment with an imidazolium moiety within the p‐NIPAAm polymer chain to produce poly(NIPAAm‐co‐BVIm) copolymers, [p‐NIBIm]⁺[Br]^?, and changing the counter anion type to produce [p‐NIBIm]⁺[X]^? (X = Cl, AcO, HCO₃, BF₄, CF₃SO₃, PF₆, SbF₆). The as‐prepared temperature‐responsive copolymers were physicochemically characterized via proton nuclear magnetic resonance spectroscopy (¹H‐NMR), Fourier‐transform infrared, X‐ray photoelectron spectroscopy, and thermogravimetric analysis. Their various LCST values, micelle sizes, and surface charges were determined using an Ultraviolet‐visible spectrophotometer and a Zeta (ξ) sizer, which were fitted with temperature and stirring control. The copolymers showed a broad LCST spectrum between 39°C and 52°C. The Zeta (ξ) potential values at a pH = 7 decreased from about +9.7 for [p‐NIBIm]⁺[X]^? (X = Cl ≈ Br) to about +2.0 mV for [p‐NIBIm]⁺[X]^? (X = PF₆ ≈ SbF₆). The micelle size (or volume) of the copolymers with different anionic species gradually increased from 181.2 nm (or 2.49 × 10^?17 cm^?3) for [p‐NIBIm]⁺[Br]^? to 229.2 nm (or 5.04 × 10^?17 cm^?3) for [p‐NIBIm]⁺[CF₃SO₃]^?, showing a clear effect of the anion on the micelle size (or volume) at a constant temperature, such as body temperature. The fact that the most important physicochemical properties for the thermo‐responsive copolymers, such as the LCST value, micelle size (or volume), and surface charge, could be easily controlled only through the anion exchange suggests these are highly applicable as ionic thermo‐responsive copolymers in a drug (or gene, protein) delivery system. Copyright © 2015 John Wiley & Sons, Ltd.     

Studies on swelling kinetics for HPC/PAN thermo‐sensitive blending films

A series of thermo‐sensitive blending films was prepared from hydroxypropylcellulose (HPC) and polyacrylonitrile (PAN). The effects of materials ratio, pH value, and temperature on the swelling velocity of these blending films were studied. At temperatures above the lower critical solution temperature (LCST), different results are found after dipping blend film samples in acid or alkaline solutions, respectively. At a pH value of 1.4, the swelling velocity of HPC/PAN blended films increased with the HPC content. The films' swelling was mainly controlled by polymer chain relaxation. For a pH value of 7.4 the mechanism responsible for the swelling is the water molecules' diffusion. The swelling velocity was also affected by temperature and pH. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis,characterization, and drug release behaviors of a novel thermo‐sensitive poly(N‐acryloylglycinates)

In this study, a novel thermo‐sensitive poly(N‐acryloylglycinates) was prepared in order to get a potential drug release carrier. The corresponding monomers and the polymers were characterized with Fourier‐transform infrared (FTIR) and ¹H NMR. The thermo‐sensitivity of the poly(N‐acryloylglycinates) was evaluated by measuring their lower critical solution temperatures (LCST) in water, inorganic salt solution, and different pH solutions. The results indicated that poly(N‐acryloylglycine methyl ester) (NAGME) and poly(N‐acryloylglycine ethyl ester) (NAGEE) exhibit a reversible thermo‐sensibility in their aqueous solutions at 61.5 and 12.5°C, respectively. However, no thermo‐sensitive behavior of poly(N‐acryloylglycine propyl ester) (NAGPE) was found due to its over hydrophobicity. The swelling studies on hydrogels were carried out at different temperatures, in different pH, and inorganic salt solutions. The hydrogels showed a remarkable phase transition at about 35°C with changing temperature. The release rate of caffeine from the thermo‐sensitive hydrogel was apparently decreased as the crosslinker content increased and temperature decreased. Seventy five percent caffeine from the polymeric hydrogel with 5% NMBA (N, N‐methylenebis(acrylamide)) was released at room temperature within 240 min, whereas 95.4% caffeine diffused into the medium at 37°C. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and characterization of polycaprolactone (B)–poly(lactide‐co‐glycolide) (A) ABA block copolymer

Novel poly(lactide‐co‐glycolide) (PLGA)/polycaprolactone (PCL) ABA block copolymers were synthesized by bulk copolymerization of glycolide and lactide with PCL diols prepolymer using stannous octoate as catalyst. The resulting copolymers were characterized by various analytical techniques including gel permeation chromatography, IR, ¹H nuclear magnetic resonance, differential scanning calorimeter and X‐ray diffractometry. Mechanical properties and hydrophilicity of the copolymers were also studied. Data showed that the copolymers presented a part‐regular structure, containing both PCL crystalline and amorphous PLGA domains. The properties of these copolymers can be adjusted by changing the compositions of the copolymers. Copyright © 2000 John Wiley & Sons, Ltd.     

Highly active bifunctional cobalt‐salen complexes for the synthesis of poly(ester‐block‐carbonate) copolymer via terpolymerization of carbon dioxide,propylene oxide,and norbornene anhydride isomer: Roles of anhydride conformation consideration

This article describes an efficient synthetic route of defined reactive polyester‐block‐polycarbonate copolymers, utilizing a bifunctional SalenCoNO₃ complex as catalyst for the single‐step terpolymerization of norbornene anhydride (NA), propylene oxide, and carbon dioxide. The geometric isomer of NA plays an important role in polymerization efficacy and the resulting polymer microstructure, including carbonate content, sequence isomer of polycarbonate moiety, and molecular weight. A hydroxyl‐functionalized polyester–polycarbonate block copolymer was synthesized by a thiol‐ene reaction. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 789–795     

Self‐assembly of thermo‐ and pH‐responsive poly(acrylic acid)‐b‐poly(N‐isopropylacrylamide) micelles for drug delivery

Self‐assembled thermo‐ and pH‐responsive poly(acrylic acid)‐b‐poly(N‐isopropylacrylamide) (PAA‐b‐PNIPAM) micelles for entrapment and release of doxorubicin (DOX) was described. Block copolymer PAA‐b‐PNIPAM associated into core‐shell micelles in aqueous solution with collapsed PNIPAM block or protonated PAA block as the core on changing temperature or pH. Complexation of DOX with PAA‐b‐PNIPAM triggered by the electrostatic interaction and release of DOX from the complexes due to the changing of pH or temperature were studied. Complex micelles incorporated with DOX exhibited pH‐responsive and thermoresponsive drug release profile. The release of DOX from micelles was suppressed at pH 7.2 and accelerated at pH 4.0 due to the protonation of carboxyl groups. Furthermore, the cumulative release of DOX from complex micelles was enhanced around LCST ascribed to the structure deformation of the micelles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5028–5035, 2008     

Synthesis and characterization of temperature‐sensitive block‐graft PNiPAAm‐b‐(PαN3CL‐g‐alkyne) copolymers by ring‐opening polymerization and click reaction

This study synthesized thermo‐sensitive amphiphilic block‐graft PNiPAAm‐b‐(PαN₃CL‐g‐alkyne) copolymers through ring‐opening polymerization of α‐chloro‐ε‐caprolactone (αClCL) with hydroxyl‐terminated macroinitiator poly(N‐isopropylacrylamide) (PNiPAAm), substituting pendent chlorides with sodium azide. This was then used to graft various kinds of terminal alkynes moieties by means of the copper‐catalyzed Huisgen's 1,3‐dipolar cycloaddition (“click” reaction). ¹H NMR, FTIR, and gel permeation chromatography (GPC) was used to characterize these copolymers. The solubility of the block‐graft copolymers in aqueous media was investigated using turbidity measurement, revealing a lower critical solution temperature (LCST) in the polymers. These solutions showed reversible changes in optical properties: transparent below the LCST, and opaque above the LCST. The LCST values were dependant on the composition of the polymer. With critical micelle concentrations (CMCs) in the range of 2.04–9.77 mg L^?1, the block copolymers formed micelles in the aqueous phase, owing to their amphiphilic characteristics. An increase in the length of hydrophobic segments or a decrease in the length of hydrophilic segments amphiphilic block‐graft copolymers produced lower CMC values. The research verified the core‐shell structure of micelles by ¹H NMR analyses in D₂O. Transmission electron microscopy was used to analyze the morphology of the micelles, revealing a spherical structure. The average size of the micelles was in the range of 75–145 nm (blank), and 105–190 nm (with drug). High drug entrapment efficiency and drug loading content were observed in the drug micelles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Thermo‐sensitive amphiphilic poly(N‐vinylcaprolactam) copolymers: synthesis and solution properties

Thermo‐sensitive amphiphilic copolymers, PVCL‐PTrpAMT and PVCL‐PVP‐PTrpAMT of hydrophilic N‐vinylcaprolactam (VCL), N‐vinylpyrrolidone (NVP), and hydrophobic N‐t‐Boc‐tryptophanamido‐N′‐methacryl thioureas (TrpAMT) monomers, were synthesized and characterized by ¹H NMR, UV‐spectroscopy, and GPC‐MALLS. The cloud point (CP) measurement showed that hydrophobic PTrpAMT and hydrophilic PVP segments significantly altered the phase transition temperature of PVCL with comparable molecular weight in aqueous solution. The CP of PVP‐PTrpAMT solution was 38.0°C, lower by 5.0°C than that of unmodified PVCL. In the presence of phosphate buffer saline (PBS), the CP value of the PVCL polymer decreased by ～2.0°C in comparison to that of the aqueous solution. Fluorescent spectroscopy and TEM studies revealed that PVCL‐PTrpAMT and PVCL‐PVP‐PTrpAMT self‐assembled into the spherical micelles, 30–70 nm in diameter, at concentrations over their CMCs in an aqueous solution. Cytotoxicity tests demonstrated that the PVCL copolymers were not harmful to cell viability, which may favor the use of the copolymers as potential thermo‐sensitive polymers in pharmaceutical applications. Copyright © 2009 John Wiley & Sons, Ltd.     

Water dispersible magnetite nanocluster coated with thermo‐responsive thiolactone‐containing copolymer

This work focused on surface modification of magnetite nanoparticle (MNP) with poly(poly(ethylene glycol) monomethyl ether methacylate)‐b‐(poly(N‐isopropylacrylamide)‐st‐poly(thiolactone acrylamide)), PPEGMA‐b‐(PNIPAAm‐st‐PTlaAm), diblock copolymer, synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization to obtain the particles having good water dispersible PPEGMA brushes, thermo‐responsive PNIPAAm, and reactive thiolactone groups of PTlaAm. The thiolactone moiety in the copolymer can readily react with amino groups grafted on MNP surface and essentially induced the formation of MNP nanocluster. According to transmission electron microscopy (TEM), the size of the nanocluster ranged between 200 and 500 nm per cluster with 8 to 10 nm in diameter for each particle. Hydrodynamic diameter of the nanocluster significantly decreased as the dispersion temperature increased from 25°C to 45°C due to the shrinkage of thermo‐responsive PNIPAAm when crossing its lower critical solution temperature (LCST). This stable nanocluster might be potentially used as a magnetic carrier for control release of entrapped entities with a thermally triggering mechanism.     

Double‐hydrophilic block copolymer for encapsulation and two‐way pH change‐induced release of metalloporphyrins

A double hydrophilic block copolymer composed of poly(acrylic acid) (PAA) and poly(4‐vinyl pyridine) (P4VP) was obtained through hydrolysis of diblock copolymer of poly(tert‐butyl acrylate) (PtBA) and P4VP synthesized using atom transfer radical polymerization. Water‐soluble micelles with PAA core and P4VP corona were observed at low (acidic) pH, while micelles with P4VP core and PAA corona were formed at high (basic) pH. Two metalloporphyrins, zinc tetraphenylporphyrin (ZnTPP) and cobalt tetraphenylporphyrin (CoTPP), were used as model compounds to investigate the encapsulation of hydrophobic molecules by both types of micelles. UV–vis spectroscopic measurements indicate that micelles with P4VP core are able to entrap more ZnTPP and CoTPP as a result of the axial coordination between the transition metals and the pyridine groups. The study found that metalloporphyrins encapsulated by the micelles with PAA core could be released on pH increase, while those entrapped by the micelles with P4VP core could be released on pH decrease. This behavior originates from the two‐way pH change‐induced disruption of PAA‐b‐P4VP micelles. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1734–1744, 2006     

Employment of modified Fe3O4 nanoparticles using thermo‐sensitive polymer for extraction and pre‐concentration of cefexime in biological samples

Cefexime is a useful antibiotic that can be prescribed to treat bacterial infections. Nanoparticles have been widely marketed as a universal solution among scientists. Many studies have been performed to modify nanoparticles to make them functional as extraction and pre‐concentration agents and drug carriers. Temperature‐sensitive polymers belong to a group of substances that undergo a major change in their physical features in response to temperature. Recently developed polymers can be used in many different areas, including modification of nanoparticles. In order to modify this nanoparticle, grafting copolymerization of Fe₃O₄ nanoparticles was performed using poly (N‐vinylcaprolactam) and 3‐allyloxy‐1,2‐propanediol. The optimum conditions for pre‐concentration of cefexime were studied. Under these optimum conditions, extraction recovery of biological samples in the range of 71–89% was obtained. The limit of detection and precision of proposed method were 4.5 × 10⁻⁴ μg mL⁻¹ and <4.11% (relative standard deviation), respectively. Based on the results from analysis of cefexime, in biological samples using the proposed method, the ability of this method to extract and pre‐concentrate cefexime was confirmed. Also, satisfactory results from an in vitro study on drug release in simulated intestine media were obtained.     

Thermoresponsive diblock copolymer micellar macro‐RAFT agent‐mediated dispersion RAFT polymerization and synthesis of temperature‐sensitive ABC triblock copolymer nanoparticles

The micellar macro‐RAFT agent‐mediated dispersion polymerization of styrene in the methanol/water mixture is performed and synthesis of temperature‐sensitive ABC triblock copolymer nanoparticles is investigated. The thermoresponsive diblock copolymer of poly(N,N‐dimethylacrylamide)‐block‐poly[N‐(4‐vinylbenzyl)‐N,N‐diethylamine] trithiocarbonate forms micelles in the polymerization solvent at the polymerization temperature and, therefore, the dispersion RAFT polymerization undergoes as similarly as seeded dispersion polymerization with accelerated polymerization rate. With the progress of the RAFT polymerization, the molecular weight of the synthesized triblock copolymer of poly(N,N‐dimethylacrylamide)‐block‐poly[N‐(4‐vinylbenzyl)‐N,N‐diethylamine]‐b‐polystyrene linearly increases with the monomer conversion, and the PDI values of the triblock copolymers are below 1.2. The dispersion RAFT polymerization affords the in situ synthesis of the triblock copolymer nanoparticles, and the mean diameter of the triblock copolymer nanoparticles increases with the polymerization degree of the polystyrene block. The triblock copolymer nanoparticles contain a central thermoresponsive poly [N‐(4‐vinylbenzyl)‐N,N‐diethylamine] block, and the soluble‐to‐insoluble ‐‐transition temperature is dependent on the methanol content in the methanol/water mixture. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2155–2165     

Rheology and phase behavior of thermo‐reversible pentablock terpolymer hydrogel

Thermo‐reversible phase behaviors and rheological properties of a pentablock terpolymer solution, poly(N‐isopropylacrylamide)‐b‐poly(ethylene oxide)‐b‐poly(propylene oxide)‐b‐poly(ethylene oxide)‐b‐poly(N‐isopropylacrylamide) (PNIPAM₁₅₀‐PEO₁₃₆‐PPO₄₅‐PEO₁₃₆‐PNIPAM₁₅₀), are investigated in comparison with its precursor, PEO₁₃₆‐PPO₄₅‐PEO₁₃₆ (F108). It is found that the critical gelation concentration of the terpolymer solution is only about 11 wt %, which is significantly lower than that of F108 solution (～22 wt %). The 11 wt % terpolymer solution displays higher viscosity, stronger gel strength, and fast thermo‐responsive behavior compared with the 22 wt % F108 solution. The 11 wt % terpolymer solution shows a typical Newtonian fluid behavior at 30 °C due to the presence of individual spherical micelles, and presents an elastic gel property at 41 °C because of the formation of the close‐packed micelle aggregates. Cryogenic transmission electron microscopy (cryo‐TEM) and variable‐temperature ¹H NMR results demonstrate that the sol–gel phase transition mechanism is mainly related to the hydrophilic/hydrophobic transition of PPO and PNIPAM groups by external temperature stimulus. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1335–1342     

A kinetic study of synthesis of amoxicillin using penicillin G acylase immobilized on agarose

We presenta kinetic model for the synthesis of amoxicillin from p-hydroxyphenylglycine methyl ester and 6-aminopenicillanic acid, catalyzed by penicillin G acylase immobilized on agarose, at 25°C. Michaelis-Menten kinetic parameters (with and without inhibition) were obtained from initial velocity data (pH 7.5 and 6.5). Amoxicillin synthesis reactions were used to validate the kinetic model after checking mass transport effects. A reasonable representation of this system was achieved under some operational conditions, but the model failed under others. Nevertheless, it will be useful whenever a simplified model is required, e.g., in model-based control algorithms for the enzymatic reactor.     

RAFT synthesis of amphiphilic (A‐ran‐B)‐b‐C diblock copolymers with tunable pH‐sensitivity

RAFT homopolymerization of 2‐(diisopropylamino)ethyl methacrylate (DPA) and 2‐(diethylamino)ethyl methacrylate (DEA) and their random copolymerization were investigated. The random copolymers of DPA‐ran‐DEA were synthesized and used as macro‐CTA to prepare poly(DPA‐ran‐DEA)‐b‐poly(N‐(2‐hydroxypropyl) methacrylamide) amphiphilic block copolymers. The ¹H NMR and GPC measurements confirmed the successful synthesis of these copolymers. The potentiometric titration results showed that the pK_b values of these copolymers were in the range of 6.7 ～ 7.7 and linearly varied with the DPA/DEA composition, regardless of the block length of HPMA. The pH‐induced micellization in PBS solution was verified by fluorescence spectroscopy. The dynamic light scattering evaluation showed that the hydrodynamic diameters of these micelles are between 37 ～ 43 nm © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3740–3748, 2008     

Formation of thermo‐sensitive and cross‐linkable micelles by self‐assembly of poly(pentafluorophenyl acrylate)‐containing block copolymer

Poly(pentafluorophenyl acrylate)‐block‐poly(N‐isopropylacrylamide) (PPFPA‐b‐PNIPAM) is synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization. Light‐responsive moieties of ortho‐nitrobenzyl (ONB)‐protected diamine are partially introduced to the PFPA moieties via postpolymerization modification. The amphiphilic block copolymers are assembled into micelles in water. The ONB‐protected diamine group in the micelle core is released upon UV irradiation, which subsequently induces an in situ cross‐linking by a spontaneous reaction with the remaining PFPA groups in the core and yields stable cross‐linked micelles. Micellization of the copolymers is confirmed by dynamic light scattering (DLS) and transmission electron microscopy (TEM). 4‐Nitro‐7‐piperazino‐2,1,3‐benzoxadiazole (NBD) and pyrene are loaded in the core of cross‐linked micelles to demonstrate the possibility for additional post‐functionalization of residual PFPA moieties and hydrophobic molecule encapsulation, respectively. It is anticipated that these micelles can be alternative cargos for incorporating active compounds that may be useful for advanced applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1103–1113     

Novel thermo‐responsive self‐assembly micelles from a double brush‐shaped PNIPAM‐g‐(PA‐b‐PEG‐b‐PA)‐g‐PNIPAM block copolymer with PNIPAM polymers as side chains

A novel double brush‐shaped copolymer with amphiphilic polyacrylate‐b‐poly(ethylene glycol)‐b‐poly acrylate copolymer (PA‐b‐PEG‐b‐PA) as a backbone and thermosensitive poly(N‐isopropylacrylamide) (PNIPAM) long side chains at both ends of the PEG was synthesized via an atom transfer radical polymerization (ATRP) route, and the structure was confirmed by FTIR, ¹H NMR, and SEC. The thermosensitive self‐assembly behavior was examined via UV‐vis, TEM, DLS, and surface tension measurements, etc. The self‐assembled micelles, with low critical solution temperatures (LCST) of 34–38 ^°C, form irregular fusiform and/or spherical morphologies with single, double, and petaling cores in aqueous solution at room temperature, while above the LCST the micelles took on more regular and smooth spherical shapes with diameter ranges from 45 to 100 nm. The micelle exhibits high stabilities even in simulated physiological media, with low critical micellization concentration (CMC) up to 5.50, 4.89, and 5.05 mg L^?1 in aqueous solution, pH 1.4 and 7.4 PBS solutions, respectively. The TEM and DLS determination reveled that the copolymer micelle had broad size distribution below its LCST while it produces narrow and homogeneous size above the LCST. The cytotoxicity was investigated by MTT assays to elucidate the application potential of the as‐prepared block polymer brushes as drug controlled release vehicles. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012