A DFT study of proton transfers for the reaction of phenol and hydroxyl radical leading to dihydroxybenzene and H2O in the water cluster

Reactions of phenol and hydroxyl radical were studied under the aqueous environment to investigate the antioxidant characters of phenolic compounds. M06‐2X/6‐311 + G(d,p) calculations were carried out, where proton transfers via water molecules were examined carefully. Stepwise paths from phenol + OH^• + (H₂O)_n (n = 3, 7, and 12) to the phenoxyl radical (Ph O^•) via dihydroxycyclohexadienyl radicals (ipso, ortho, meta, and para OH‐adducts) were obtained. In those paths, the water dimer was computed to participate in the bond interchange along hydrogen bonds. The concerted path corresponding to the hydrogen atom transfer (HAT, apparently Ph OH + OH^• → Ph O^• + H₂O) was found. In the path, the hydroxyl radical located on the ipso carbon undergoes the charge transfer to prompt the proton (not hydrogen) transfer. While the present new mechanism is similar to the sequential proton loss electron transfer (SPLET) one, the former is of the concerted character. Tautomerization reactions of ortho or para (OH)C₆H₅=O + (H₂O)_n → C₆H₄(OH)₂(H₂O)_n were traced with n = 2, 3, 4, and 14. The n = 3 (and n = 14) model of ortho and para was calculated to be most likely by the strain‐less hydrogen‐bond circuit.     

Synthesis of Mesoionic 4‐(para‐substituted Phenyl‐5‐2,4‐dichlorophenyl)‐1,3‐4‐thiadiazolium‐2‐aminides by Direct Cyclization via Acylation of Thiosemicarbazides

The synthesis of ten novel mesoionic 4‐[para‐substituted (H, CH₃, OCH₃, NO₂, Cl, Br, OH, t‐C₄H₉, C₆H₅, C₄H₉) phenyl‐5‐2,4‐dichlorophenyl]‐1,3‐4‐thiadiazolium‐2‐aminides, as hydrochlorides, are described. The synthesis strategy utilized the corresponding para‐substituted isothiocyanates as starting materials to obtain the thiosemicarbazides through reaction with phenylhydrazine (61–98%), which were then submitted to acylation with 2,4‐dichloro benzoyl chloride and direct cyclization to generate the desired substituted mesoionic compounds in good yields (ca. 80%).     

Kinetics of C6H5 radical reactions with 2‐methylpropane, 2,3‐dimethylbutane and 2,3,4‐trimethylpentane

The absolute bimolecular rate constants for the reactions of C₆H₅ with 2‐methylpropane, 2,3‐dimethylbutane and 2,3,4‐trimethylpentane have been measured by cavity ringdown spectrometry at temperatures between 290 and 500 K. For 2‐methylpropane, additional measurements were performed with the pulsed laser photolysis/mass spectrometry, extending the temperature range to 972 K. The reactions were found to be dominated by the abstraction of a tertiary C H bond from the molecular reactant, resulting in the production of a tertiary alkyl radical: C₆H₅ + CH(CH₃)₃ → C₆H₆ + t‐C₄H₉ (1) (1) C₆H₅ + (CH₃)₂CHCH(CH₃)₂ → C₆H₆ + t‐C₆H₁₃ (2) (2) C₆H₅ + (CH₃)₂CHCH(CH₃)CH(CH₃)₂ → C₆H₆ + t‐C₈H₁₇ (3) (3) with the following rate constants given in units of cm³ mol⁻¹ s⁻¹: k₁ = 10^{(11.45 ± 0.18)} e^{−(1512 ± 44)/T} k₂ = 10^{(11.72 ± 0.15)} e^{−(1007 ± 124)/T} k₃ = 10^{(11.83 ± 0.13)} e^{−(428 ± 108)/T} © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 645–653, 1999     

Synthesis,characterization, and in vitro antimicrobial and antitumor activities of some tetraphenylstibonium(V) carboxylates

Several hitherto unreported pentacoordinated tetraphenylstibonium(V) carboxylates of general formula (C₆H₅)₄SbL, where L = o‐OHC₆H₅COO , (C₆H₅)₂C(OH)COO , 2‐(6‐OCH₃C₁₀H₆)CH(CH₃)COO , ArCH(OH)COO (Ar = C₆H₅, p‐CF₃C₆H₄, and p OCH₃C₆H₄), have been prepared and characterized by elemental analysis, solid state IR, ¹H NMR, and ¹³C NMR spectra, conductivity, and molecular weight measurements. Spectroscopic data together with solution phase studies conform to the requirement of triagonal‐bipyramidal configuration for these compounds. They were tested for in vitro antifungal (against Aspergillus flavus and Aspergillus niger) and antibacterial (against Staphylococcus aureus and Klebsiella pneumoniae) activities. The in vitro antitumor activity of all stibonium carboxylates was examined against MCF‐7 cell line. A few of them were found to exhibit moderate to significant biological activity. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:688–693, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20498     

Synthesis,characterization, antifungal,antibacterial, and antitumor activities of some tris(pentafluorophenyl)arsenic(V) derivatives

A series of tris(pentafluorophenyl) arsenic(V) derivatives of the type (C₆F₅)₃AsL₂, (C₆F₅)₃As(Cl)(L) [L =  OCOC₆H₄(o‐OH),  OCOC‐(OH)(C₆H₅)₂, and 2‐(6‐OCH₃C₁₀H₆)CH(CH₃) COO ], and cycloarsenates, (R = C₆H₅, p‐CF₃C₆H₄, and p‐OCH₃C₆H₄) have been isolated and characterized by elemental analysis and spectroscopic data (infrared; ¹H, ¹⁹F, and ¹³C NMR). These compounds were screened for their in vitro antifungal, antibacterial, and antitumor activities and were found to show moderate to significant activity. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 21:181–187, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20593     

Kinetics and mechanism associated with the reactions of hydroxyl radicals and of chlorine atoms with 1‐propanol under near‐tropospheric conditions between 273 and 343 K

Rate constants for the reactions of OH radicals and Cl atoms with 1‐propanol (1‐C₃H₇OH) have been determined over the temperature range 273–343 K by the use of a relative rate technique. The value of k(Cl + 1‐C₃H₇OH) = (1.69 ± 0.19) × 10^?12 cm³ molecule^?1 s^?1 at 298 K and shows a small increase of 10% between 273 and 342 K. The value of k(OH + 1‐C₃H₇OH) increases by 14% between 273 and 343 K with a value of (5.50 ± 0.55) × 10^?12 cm³ molecule^?1 s^?1 at 298 K, and further when combined with a single independent experimentally determined value at 753 K gives k(OH + 1‐C₃H₇OH) = 4.69 × 10^?17T^1.8 exp(422/T) cm³ molecule^?1 s^?1, which fits each data point to better than 2%. Two well‐established structure–activity relationships for H abstraction by OH radicals give accurate predictions of the rate constant for OH + 1‐C₃H₇OH, provided the β‐CH₂ group is given an increased reactivity of a factor of about 2 over that for the structurally equivalent CH₂ group in alkanes at 298 K. A quantitative product analysis was carried out at 298 K for the Cl‐initiated photooxidation of 1‐C₃H₇OH, using both FTIR and gas chromatography. HCHO, CH₃CHO, and C₂H₅CHO were the only major organic primary products observed, although HCOOH was found in much smaller amounts as a secondary product. A key characteristic of the analysis was that the initial values of the product ratio [CH₃CHO]/[C₂H₅CHO] were effectively constant for NO pressures between 0.15 and 0.3 Torr, but fell by about 35% as the pressure fell to 0.0375 Torr. From a detailed consideration of the mechanism for the oxidation, it is suggested that C₂H₅CHO, CH₃CHO (+HCHO), and 3 molecules of HCHO are formed uniquely from CH₃CH₂CHOH, CH₃CHCH₂OH, and CH₂CH₂CH₂OH radicals, respectively. On this basis, use of the product yields gives the branching ratios of 56, 30, and 14% for Cl atom reaction at the α‐, β‐, and γ‐C? H positions in 1‐C₃H₇OH at 298 K. Given the very low temperature coefficients involved, little change will occur over tropospheric temperature ranges. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 34: 110–121, 2002     

Quantum chemical metabolism‐based simulation of carcinogenic potency of benzene derivatives

Using an oxenoid model, we investigated dependences of carcinogenic potency of the benzenes C₆H₅‐X on a nature of substituents X. According to the model, a P450 enzyme breaks a dioxygen molecule and generates the oxens, which readily react with substrates. We suggest that a stability of the intermediate OC₆H₆‐X with tetrahedrally coordinated C atom relative to the molecule C₆H₅‐X determines a rate of substrate biotransformation. Using MO LCAO MNDO approach, we calculated the total energies of molecules C₆H₆‐X and arene oxides OC₆H₆‐X. A difference ΔE_min of these values determines activation energy of oxidation reaction. The compounds with the low ΔE_min values are noncarcinogenic. Benzene derivatives with high ΔE_min values belong to carcinogenic compounds series. The carcinogenicity of amino‐ and nitro‐substituted benzenes is also determined by N‐oxidation of amino and reduction of the nitro group. As the phenylhydroxylamines XC₆H₄NHOH and nitrenium ions XC₆OH₄NH⁺ are the common metabolites of the nitro‐ and amino‐substituted benzenes and nitrenium ions XC₆H₄NH⁺ are the ultimate carcinogens, we use the differences ΔE_N = E(XC₆H₄NH⁺) ? E(XC₆H₄NHOH) as the second parameter characterizing the carcinogenic activity of amino‐ and nitro‐substituted benzenes. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Kinetics of phenyl radical reactions with ethane and neopentane: Reactivity of C6H5 toward the primary C‐H bond of alkanes

The kinetics of C₆H₅ reactions with C₂H₆ (1) and neo‐C₅H₁₂ (2) have been studied by the pulsed laser photolysis/mass spectrometric method using C₆H₅COCH₃ as the phenyl precursor at temperatures between 565 and 1000 K. The rate constants were determined by kinetic modeling of the absolute yields of C₆H₆ at each temperature. Another major product, C₆H₅CH₃, formed by the recombination of C₆H₅ and CH₃, could also be quantitatively modeled using the known rate constant for the reaction. A weighted least‐squares analysis of the two sets of data gave k₁ = 10^11.32±0.05 exp[−(2236 ± 91)/T] cm³ mol⁻¹ s⁻¹ and k₂ = 10^11.37±0.03 exp[−(1925 ± 48)/T] cm³ mol⁻¹ s⁻¹ for the temperature range studied. The result of our sensitivity analysis clearly supports that the yields of C₆H₆ and C₆H₅CH₃ depend primarily on the abstraction reactions and C₆H₅ + CH₃, respectively. From the absolute rate constants for the two reactions we obtained the value for the H‐abstraction from a primary C‐H bond, k‐CH = 10^10.40±0.06 exp(−1790 ± 102/T) cm³ mol⁻¹ s⁻¹. This result is utilized for analysis of other kinetic data measured for C₆H₅ reactions with alkanes in solution as well as in the gas phase. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 33: 64–69, 2001     

Competing Pathways in the Photogeneration of Didehydrotoluenes from (Trimethylsilylmethyl)aryl Sulfonates and Phosphates

The scope of the photochemical generation of α,n‐didehydrotoluene diradicals from aryl sulfonates and phosphates and their chemistry are explored. The thermally inaccessible α,2‐ and α,4‐ intermediates are efficiently obtained by irradiation of ortho‐ and para‐(trimethylsilylmethyl)phenyl triflates through heterolytic splitting of the ester anion from the substrate in the triplet state. Triplet phenyl cations are formed and the loss of trimethylsilyl cation from them affords the desired diradicals (³Me₃SiCH₂C₆H₄‐OZ→³Me₃SiCH₂C₆H₄⁺→ ^? CH₂C₆H₄ ^? ). Triplet sensitization is required, for which acetone is used throughout. Direct irradiation leads, on the contrary, to photo‐Fries fragmentation (¹Me₃SiCH₂C₆H₄O‐Z→Me₃SiCH₂C₆H₄O ^? +Z ^? ). With mesylates, where ester cleavage is less convenient, a further competition from the triplet is direct desilylation. Didehydrotoluenes are also obtained from the corresponding phosphates, although with poor efficiency.     

Novel Copolymers of Vinyl Acetate and Some Ring‐Substituted 2‐Phenyl‐1,1‐dicyanoethylenes

Electrophilic trisubstituted ethylene monomers, some ring‐substituted 2‐phenyl‐1,1‐dicyanoethylenes, RC₆H₄CH?C(CN)₂ (where R is 3‐C₆H₅O, 4‐C₆H₅O, 3‐C₆H₅CH₂O, 4‐C₆H₅CH₂O, 4‐CH₃CO₂, 4‐CH₃CONH, 4‐(C₂H₅)₂N) were synthesized by piperidine catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and malononitrile, and characterized by CHN elemental analysis, IR, ¹H‐ and ¹³C‐NMR. Novel copolymers of the ethylenes and vinyl acetate were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C‐NMR, GPC, DSC, and TGA. High T _g of the copolymers, in comparison with that of polyvinyl acetate, indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 190–700°C range.     

Kinetics of phenyl radical reactions with propane,n‐butane,n‐hexane,and n‐octane: Reactivity of C6H5 toward the secondary C?H bond of alkanes

The kinetics of C₆H₅ reactions with n‐C_nH_2n+2 (n = 3, 4, 6, 8) have been studied by the pulsed laser photolysis/mass spectrometric method using C₆H₅COCH₃ as the phenyl precursor at temperatures between 494 and 1051 K. The rate constants were determined by kinetic modeling of the absolute yields of C₆H₆ at each temperature. Another major product C₆H₅CH₃ formed by the recombination of C₆H₅ and CH₃ could also be quantitatively modeled using the known rate constant for the reaction. A weighted least‐squares analysis of the four sets of data gave k (C₃H₈) = (1.96 ± 0.15) × 10¹¹ exp[?(1938 ± 56)/T], and k (n‐C₄H₁₀) = (2.65 ± 0.23) × 10¹¹ exp[?(1950 ± 55)/T] k (n‐C₆H₁₄) = (4.56 ± 0.21) × 10¹¹ exp[?(1735 ± 55)/T], and k (n?C₈H₁₈) = (4.31 ± 0.39) × 10¹¹ exp[?(1415 ± 65)T] cm³ mol^?1 s^?1 for the temperature range studied. For the butane and hexane reactions, we have also applied the CRDS technique to extend our temperature range down to 297 K; the results obtained by the decay of C₆H₅ with CRDS agree fully with those determined by absolute product yield measurements with PLP/MS. Weighted least‐squares analyses of these two sets of data gave rise to k (n?C₄H₁₀) = (2.70 ± 0.15) × 10¹¹ exp[?(1880 ± 127)/T] and k (n?C₆H₁₄) = (4.81 ± 0.30) × 10¹¹ exp[?(1780 ± 133)/T] cm³ mol^?1 s^?1 for the temperature range 297‐‐1046 K. From the absolute rate constants for the two larger molecular reactions (C₆H₅ + n‐C₆H₁₄ and n‐C₈H₁₈), we derived the rate constant for H‐abstraction from a secondary C? H bond, k_s?CH = (4.19 ± 0.24) × 10¹⁰ exp[?(1770 ± 48)/T] cm³ mol^?1 s^?1. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 36: 49–56, 2004     

Synthesis and Characterization of Diphenyltin(IV) Dicarboxylates Containing Germanium

Twelve new germanium substituted diphenyltin dipropionates with the general formula (R¹GeCHR²‐CHR³COO)₂SnPh₂ where R¹ = N(CH₂CH₂O)₃, (C₆H₅)₃ and (CH₃C₆H₄)₃, R² = H, CH₃, C₆H₅, p‐CH₃C₆H₄, p‐CH₃OC₆H₄, p‐ClC₆H₄, and R³ = H, CH₃ have been synthesized by the reaction of diphenyltin oxide with a germanium substituted propionic acid. All the compounds were characterized by elemental analysis, IR, multi‐nuclear (¹H, ¹³C, ¹¹⁹Sn) NMR and Mössbauer spectroscopies as well as mass spectrometry. The in vitro antibacterial activity of selected compounds is also reported.     

Kinetic regularities of conversion of ozone complexes with arenes

The kinetic regularities of conversion of ozone complexes with several substituted benzenes (ArX = C₆H₅Me, C₆H₅Et, C₆H₅CHMe₂, C₆H₅CMe₃, C₆H₅F, C₆H₅Cl,m-BrC ₆ H ₅ Me, and C₆H₅CH₂Cl) were studied by spectrophotometry. The rate of consumption of [ArX · O₃ in a CH₂Cl₂-ArX solution obeys the kinetic equationW =k ₀[ArX · O₃]+k ₁ [ArX · O3][ArX]. The values of the rate constants ko andk ₁for the complexes studied were determined at -60+0 °C.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 371–374, 'February, 1996.     

Synthesis reactivity and electrochemical properties of substituted cyclopentadienyl cobalt (III) complexes

Cyclopentadienyl cobalt complexes (η⁵‐C₅H₄R) CoLI₂ [L = CO,R=‐COOCH₂CH=CH₂ (3); L=PPh₃, R=‐COOCH₂‐CH=CH₂ (6); L=P(p‐C₆H₄O₃)₃, R = ‐COOC(CH₃) = CH₂ (7), ‐COOCH₂C₆H₅ (8), ‐COOCH₂CH = CH₂ (9)] were prepared and characterized by elemental analyses, ¹H NMR, ER and UV‐vis spectra. The reaction of complexes (η⁵‐C₅H₄R)CoLI₂ [L= CO, R= ‐COOC(CH₃) = CH₂ (1), ‐COOCH₂C₆H₅(2); L=PPh₃, R=‐COOC (CH₃) = CH₂ (4), ‐COOCH₂C₆H₅ (5)] with Na‐Hg resulted in the formation of their corresponding substituted cobaltocene (η⁵‐C₅H₄R)₂ Co[R=‐COOC(CH₃) = CH₂ (10), ‐COOCH₂C₆H₅ (11)]. The electrochemical properties of these complexes 1–11 were studied by cyclic voltammetry. It was found that as the ligand (L) of the cobalt (III) complexes changing from CO to PPh₃ and P(p‐tolyl)₃, their oxidation potentials increased gradually. The cyclic voltammetry of α,α′‐substituted cobaltocene showed reversible oxidation of one electron process.     

Coordination‐directed one‐dimensional coordination polymers generated from a new oxadiazole bridging ligand and HgX2 (X = Cl,Br and I)

A new 1,3,4‐oxadiazole bridging bent organic ligand, 2,5‐bis{5‐methyl‐2‐[(4‐pyridyl)methoxy]phenyl}‐1,3,4‐oxadiazole, C₂₈H₂₄N₄O₃, L, has been used to create three novel one‐dimensional isomorphic coordination polymers, viz. catena‐poly[[[dichloridomercury(II)]‐μ‐2,5‐bis{5‐methyl‐2‐[(4‐pyridyl)methoxy]phenyl}‐1,3,4‐oxadiazole] methanol monosolvate], {[HgCl₂(C₂₈H₂₄N₄O₃)]·CH₃OH}_n, catena‐poly[[[dibromidomercury(II)]‐μ‐2,5‐bis{5‐methyl‐2‐[(4‐pyridyl)methoxy]phenyl}‐1,3,4‐oxadiazole] methanol monosolvate], {[HgBr₂(C₂₈H₂₄N₄O₃)]·CH₃OH}_n, and catena‐poly[[[diiodidomercury(II)]‐μ‐2,5‐bis{5‐methyl‐2‐[(4‐pyridyl)methoxy]phenyl}‐1,3,4‐oxadiazole] methanol monosolvate], {[HgI₂(C₂₈H₂₄N₄O₃)]·CH₃OH}_n. The free L ligand itself adopts a cis conformation, with the two terminal pyridine rings and the central oxadiazole ring almost coplanar [dihedral angles = 5.994 (7) and 9.560 (6)°]. In the Hg^II complexes, however, one of the flexible pyridylmethyl arms of ligand L is markedly bent and helical chains are obtained. The Hg^II atom lies in a distorted tetrahedral geometry defined by two pyridine N‐atom donors from two L ligands and two halide ligands. The helical chains stack together via interchain π–π interactions that expand the dimensionality of the structure from one to two. The methanol solvent molecules link to the complex polymers through O—H...N and O—H...O hydrogen bonds.     

Structure and Bonding in Bis(1‐naphthyl) Diselenide and Bis{[2‐(N,N‐dimethylamino)methyl]phenyl} Tetraselenide,and Their Brominated Derivatives

The formation and crystal structures of bis(1‐naphthyl) diselenide ( 1 ) and bis{[2‐(N,N‐dimethylamino)methyl]phenyl} tetraselenide ( 2 ) are described. Whereas 1 can be produced in good yields, 2 is formed only as a minor product together with the known main product, bis{[2‐(N,N‐dimethylamino)methyl]phenyl} diselenide. The composition of the reaction mixture is semi‐quantitatively estimated by ⁷⁷Se NMR spectroscopy and DFT calculations. The effect of the n²→σ*(Se–Se) and π→σ*(Se–Se) secondary bonding interactions on the Se–Se bonds is discussed both by DFT calculations and comparison with literature, as available. The bromination of 1 yields monomeric (1‐naphthyl)selenenyl bromide ( 3 ) in good yields. That of the reaction mixture of (C₆H₄CH₂NMe₂)Se_x (x = 2–4) and Se₈ afforded (C₆H₄CH₂NMe₂H)₂[SeBr₄] ( 4 ) and (C₆H₄CH₂NMe₂H)₂[SeBr₆] ( 5 ) in addition to (C₆H₄CH₂NMe₂)SeBr, which has been previously reported.     

Outer‐sphere reduction of hexacyanoferrate(III) by enolizable and nonenolizable aldehydes in alkaline medium

Outer‐sphere reduction of hexacyanoferrate(III) by some enolizable/nonenolizable aldehydes (viz., aliphatic, heterocyclic, and aromatic aldehydes) in alkaline medium has been studied spectrophotometrically at λ_max = 420 nm. The reactions are first order each in [aldehyde] and [Fe(CN)₆^3?]. The rate increases with an increase in [OH^?] in the oxidation of aliphatic and heterocyclic aldehydes, whereas it is independent of [OH^?] in the reaction with aromatic aldehydes. The intervention of free radicals in the reaction mixture was carried out using both acrylonitrile and acrylamide scavenger in two different experiments. The kinetic results indicate that the oxidation of benzaldehyde in aqueous medium proceeds at a slower rate than the aliphatic aldehydes (other than formaldehyde) and furfural. The values of third‐order rate constant (k₃) at 308 K in the oxidations of some aliphatic aldehydes and furfural follow the order (CH₃)₂CH? > CH₃CH₂? > CH₃? > C₄H₃O? > H? . The rate constants correlate with Taft's σ* value, the reaction constant being negative (–9.8). The pseudo–first‐order rate constants in the oxidations of benzaldehyde and substituted benzaldehydes follow the order ? NO₂ > ? H > ? Cl > ? OCH₃. The Hammett plot is also linear with a ρ value (0.6488) for meta‐ and para‐substituted benzaldehydes. The kinetic isotope effect for benzaldehyde (k_H/k_D = 1.93 at 303 K) was obtained. The rate‐determining step is the outer‐sphere formation of Fe(CN)₆^4? and free radicals, which is followed by the rapid oxidation of free radicals by Fe(CN)₆^3? to give products. The kinetic data and hence thermodynamic parameters have been used to distinguish enolizable and nonenolizable aldehydes. An attempt has also been made to correlate kinetic data with hydration equilibrium constants of some aliphatic aldehydes. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 494–505, 2012     

Rate constant and RRKM product study for the reaction between CH3 and C2H3 at T = 298 K

The total rate constant k₁ has been determined at P = 1 Torr nominal pressure (He) and at T = 298 K for the vinyl‐methyl cross‐radical reaction: (1) CH₃ + C₂H₃ → Products. The measurements were performed in a discharge flow system coupled with collision‐free sampling to a mass spectrometer operated at low electron energies. Vinyl and methyl radicals were generated by the reactions of F with C₂H₄ and CH₄, respectively. The kinetic studies were performed by monitoring the decay of C₂H₃ with methyl in excess, 6 < [CH₃]₀/ [C₂H₃]₀ < 21. The overall rate coefficient was determined to be k₁(298 K) = (1.02 ± 0.53) × 10⁻¹⁰ cm³ molecule⁻¹ s⁻¹ with the quoted uncertainty representing total errors. Numerical modeling was required to correct for secondary vinyl consumption by reactions such as C₂H₃ + H and C₂H₃ + C₂H₃. The present result for k₁ at T = 298 K is compared to two previous studies at high pressure (100–300 Torr He) and to a very recent study at low pressure (0.9–3.7 Torr He). Comparison is also made with the rate constant for the similar reaction CH₃ + C₂H₅ and with a value for k₁ estimated by the geometric mean rule employing values for k(CH₃ + CH₃) and k(C₂H₃ + C₂H₃). Qualitative product studies at T = 298 K and 200 K indicated formation of C₃H₆, C₂H₂, and C₃H₅ as products of the combination‐stabilization, disproportionation, and combination‐decomposition channels, respectively, of the CH₃ + C₂H₃ reaction. We also observed the secondary C₄H₈ product of the subsequent reaction of C₃H₅ with excess CH₃; this observation provides convincing evidence for the combination‐decomposition channel yielding C₃H₅ + H. RRKM calculations with helium as the deactivator support the present and very recent experimental observations that allylic C‐H bond rupture is an important path in the combination reaction. The pressure and temperature dependencies of the branching fractions are also predicted. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 304–316, 2000     

Sekundäre Hydroxyalkylphosphane: Synthese und Charakterisierung mono‐, bis‐ und trisalkoxyphosphan‐substituierter Zirconiumkomplexe und des heterobimetallischen Dreikernkomplexes [Cp2Zr{O(CH2)3PHMes(AuCl)}2]

Secondary Hydroxyalkylphosphanes: Synthesis and Characterization of Mono‐, Bis‐ and Trisalkoxyphosphane‐substituted Zirconium Complexes and the Heterobimetallic Trinuclear Complex [Cp₂Zr{O(CH₂)₃PHMes(AuCl)}₂] The secondary hydroxyalkylphosphanes RPHCH₂OH [R = 2,4,6‐Me₃C₆H₂ (Mes) ( 1 ), 2,4,6‐ⁱPr₃C₆H₂ (Tipp) ( 2 )], 1‐AdPH‐2‐OH‐cyclo‐C₆H₁₀ ( 3 ) and RPH(CH₂)₃OH [R = Ph ( 4 ), Mes ( 5 ), Tipp ( 6 ), Cy ( 7 ), ^tBu ( 8 )] were obtained from primary phosphanes RPH₂ and formaldehyde ( 1 , 2 ) or from LiPHR and cyclohexene oxide ( 3 ) or trimethylene oxide ( 4 ‐ 8 ). Starting from 5 or 7 and [Cp^R₂ZrMe₂] [Cp^R = C₅EtMe₄ (Cp°), C₅H₅ (Cp), C₅MeH₄ (Cp′)], the monoalkoxyphosphane‐substituted zirconocene complexes [Cp^R₂Zr(Me){O(CH₂)₃PHMes}] [Cp^R = Cp° ( 9 ), Cp ( 10 )] were prepared. With [Cp^R₂ZrCl₂], the bisalkoxyphosphane‐substituted complexes [Cp′₂Zr{O(CH₂)₃PHMes}₂] ( 11 ) and [Cp₂Zr{O(CH₂)₃PHCy}₂] ( 12 ) are obtained, and with [Tp^RZrCl₃], the trisalkoxyphosphane‐substituted zirconium complexes [Tp^RZr{O(CH₂)₃PHMes}₃] [Tp^R = trispyrazolylborato (Tp) ( 13 ), Tp^R = tris(3,5‐dimethyl)pyrazolylborato (Tp*) ( 14 )] are prepared. The reaction of 5 with [AuCl(tht)] (tht = tetrahydrothiophene) yielded the mononuclear complex [AuCl{PHMes(CH₂)₃OH}] ( 15 ). The trinuclear complex [Cp₂Zr{O(CH₂)₃PHMes(AuCl)}₂] ( 16 ) was obtained from [Cp₂ZrCl₂] and 15 . Compounds 1 ‐ 16 were characterized spectroscopically (¹H‐, ³¹P‐, ¹³C‐NMR; IR; MS) and compound 2 also by crystal structure determination. The bis‐ and trisalkoxyphosphane‐substituted complexes 11‐14 and 16 were obtained as mixtures of two diastereomers which could not be separated.     

Gel formation in cationic polymerization of divinyl ethers. II. 2,2-Bis{4-[(2-vinyloxy)ethoxy]phenyl}propane

Cationic polymerization of 2,2-bis{4-[(2-vinyloxy)ethoxy]phenyl}propane [CH₂CH O CH₂CH₂O C₆H₄ C(CH₃)₂ C₆H₄ OCH₂CH₂ O CHCH₂; 2], a divinyl ether with oxyethylene units adjacent to the polymerizable vinyl ether groups and a bulky central spacer, was investigated in CH₂Cl₂ at 0°C with the diphenyl phosphate [(C₆H₅O)₂P(O)OH]/zinc chloride (ZnCl₂) initiating system. The polymerization proceeded quantitatively and gave soluble polymers up to 85% monomer conversion. In the same fashion as the polymerization of 1,4-bis[2-vinyloxy(ethoxy)]benzene (CH₂CH O CH₂CH₂O C₆H₄ OCH₂CH₂ O CHCH₂; 1) that we already studied, the content of the unreacted pendant vinyl ether groups of the produced soluble polymers decreased with monomer conversion, and almost all the pendant vinyl ether groups were consumed in the soluble products prior to gelation. Alternatively, endo-type double bonds were gradually formed in the polymer main chains by chain transfer reactions and other side reactions as the polymerization proceeded. The polymerization behavior of isobutyl vinyl ether (3), a monofunctional vinyl ether, under the same conditions, showed that the endo-type olefins in the polymer backbones are of no polymerization ability with the growing active species involved in the present polymerization systems. These results indicate that the intermolecular crosslinking reactions occurred primarily by the pendant vinyl ether groups, and the final stage of crosslinking process leading to gelation also may occur by the small amount of the residual pendant vinyl ether groups (supposedly less than 2%). The formation of the soluble polymers that almost lack the unreacted pendant vinyl ether groups is most likely due to the frequent occurrence of intramolecular crosslinking reactions. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1931–1941, 1999