7—碘—8—羟基喹啉—5—磺酸—溴化十六烷基三甲铵荧光光度法测定痕量镥

本文研究了镥－Ｆｅｒｒｏｎ－表面活性剂三元荧光体系的荧光特性，各种表面活性剂中以溴化十六烷基三甲铵的增敏效果最佳，与相应的二元体系相比较，灵敏度提高近１０倍。镥的测定下限可达８．８ｎｇ／ｍｌ。本法与Ｐ５０７萃取色谱分离法相结合可用于天然混合稀土氧化物中痕量镥的测定，结果较满意。     

Facile Fabrication of Cu-doped Carbon Aerogels as Catalysts for the Thermal Decomposition of Ammonium Perchlorate

We report a simple and effective method to produce copper-doped carbon aerogel (Cu-CA) using sodium alginate as a carbon precursor through ion crosslinking and high-temperature carbonization. Results indicate that Cu-alginate has a 3D scaffold structure with pores. The effect of using different metal salt mass ratios of Cu-CA on the catalytic thermal decomposition of AP is also investigated. The thermal decomposition temperature of AP decreases by 94.24 °C, and the activation energy of the decomposition reaction is reduced by 45.7 kJ/mol. These results demonstrate that the composite exhibits superior catalytic performance compared with a single-component transition metal salt.     

Direct Electrochemistry of Heme Proteins on Electrodes Modified with Didodecyldimethyl Ammonium Bromide and Carbon Black

A novel matrix based on commercially available carbon black (CB) N220 and didodecyldimethyl ammonium bromide (DDAB) was shown to be a reliable support for direct electron transfer reactions between screen printed electrode (SPE) and Fe(III)‐heme proteins. Cytochrome c (cyt c), myoglobin (Mb), horseradish peroxidase (HRP) and cytochromes P450 (CYP 51A1, CYP 3A4, CYP 2B4) generated well‐shaped cyclic voltammograms on SPE/CB/DDAB electrodes (both in solution and in immobilized state). The attractive performance characteristics of CB modified electrodes are advantageous over single‐walled carbon nanotubes (SW CNT) based ones. The achieved direct electrochemistry of heme proteins on CB/DDAB‐modified electrodes provided successful elaboration of the immunosensor for cardiac Mb. The immunosensor showed applicability for diagnostics of myocardial infarction displaying significant difference in cardiac Mb content of human blood plasma samples taken from the corresponding patients.     

Electrochemical Oxidation and Determination of Theophylline at a Carbon Paste Electrode Using Cetyltrimethyl Ammonium Bromide as Enhancing Agent

Abstract

The oxidation of theophylline was studied at a carbon paste electrode in the presence of cetyltrimethyl ammonium bromide by cyclic and differential pulse voltammetry. The results indicated that the electrochemical responses of theophylline are apparently improved by cetyltrimethyl ammonium bromide, due to the enhanced accumulation of theophylline at carbon paste electrode surface. Under optimal conditions the peak current was proportional to theophylline concentration in the range of 8.0 × 10^?7 to 2.0 × 10^?4 M with a detection limit of 1.85 × 10^?7 M by differential pulse voltammetry. The proposed method was applied to the determination of theophylline in tablet and urine samples.     

TiO2/十六烷基三甲基溴化铵有序交替层状纳米复合薄膜的制备与结构表征

近年来有序交替的层状纳米结构薄膜的制备吸引了研究者们的极大关注. 目前, 这类薄膜的制备方法研究得最多的是LB技术[1～3]、基于化学吸附的自组装成膜技术[4,5]和交替沉积组装技术[6～8]. 但这几种方法都有明显的缺陷[9,10], 其中,通过LB技术制备有序交替层状纳米复合薄膜需要昂贵的仪器, 而且由于层间是分子相互作用, 膜的稳定性较差; 基于化学吸附的自组装成膜技术由于需要高反应活性的分子和特殊的基底表面, 并且由于化学反应的产率很难达到100%, 因此通过这种方法制备结构有序的多层膜并不容易; 利用交替沉积的方法制备出具有实用厚度的纳米多层膜需要耗费大量的时间. 最近, 出现了一种称为蒸发诱导的超分子自组装方法, 由这种方法制备的纳米多层膜具有成膜速度快和膜有序度高等优点, 此外还可以通过改变成膜物质浓度和拉膜速度来控制薄膜的厚度, 但与LB膜相比其厚度无法在分子水平上控制. 利用这种方法制备多层膜目前的文献报道仅限于线形SiO2与有机物的组装[10～13]. 本文利用这种方法制备了TiO2/十六烷基三甲基溴化铵纳米复合薄膜并对其结构进行了表征, 结果表明所制备的薄膜具有TiO2/十六烷基三甲基溴化铵有序交替的层状结构.     

Poly(Ionic Liquid)-Derived Carbon with Site-Specific N-Doping and Biphasic Heterojunction for Enhanced CO2 Capture and Sensing

CO₂ capture is a pressing global environmental issue that drives scientists to develop creative strategies for tackling this challenge. The concept in this contribution is to produce site-specific nitrogen doping in microporous carbon fibers. Following this approach a carbon/carbon heterojunction is created by using a poly(ionic liquid) (PIL) as a “soft” activation agent that deposits nitrogen species exclusively on the surface of commercial microporous carbon fibers. This type of carbon-based biphasic heterojunction amplifies the interaction between carbon fiber and CO₂ molecule for unusually high CO₂ uptake and resistive sensing.     

碳纳米管与CTMAB协同加强荧光探针并应用于测定痕量锰

提出将碳纳米管(CNT)作为一种新型分析增效试剂用于加强荧光探针,研究了其与阳离子表面活性剂-十六烷基溴化铵(CTMAB)的协同增敏机理,并应用于苯基荧光酮(PF)荧光猝灭法测定锰离子的体系中。结果表明,在CNT与CTMAB复配的影响下,PF与Mn2+形成的络合物荧光猝灭强度最大,据此建立了CNT加强荧光猝灭法测定痕量锰的新方法。方法的检出限为0.2μg/L,线性范围为0.4~10μg/L,回归方程:ΔF=10.48ρ(μg/L)+10.77,R=0.9992。本法可用于自来水中Mn2+含量的检测。     

超薄氮掺杂碳纳米片负载单原子镍用于高效电催化还原二氧化碳

将二氧化碳转化为高附加值的燃料和化学品是缓解当前能源危机和控制温室气体排放的有效策略之一,但此法受限于缺乏高活性与高选择性的电催化剂。因此,我们通过热解含镍金属有机框架结构(MOF)和二氰二胺制得负载高含量镍单原子(7.77% (w))的超薄氮掺杂二维碳纳米片用于电催化还原CO₂生成CO。研究发现高温热解能将MOF中Ni²⁺转化为Ni⁺-N-C和Ni²⁺-N-C结构,且Ni⁺-N-C含量依赖于热解温度——其含量随热解温度增加呈现火山型变化。800 ℃下,Ni²⁺到Ni⁺-N-C的转化和石墨化的C生成达到最优水平。Ni⁺-N-C结构有适宜的*CO中间体结合能,能有效地抑制析氢反应的同时还能促进CO生成。因此,800 ℃热处理制得的材料(Ni-N-C-800)催化CO₂生成CO效率最高。调节电解液浓度,能进一步优化电催化性能。当电解液(碳酸氢钾)浓度为0.5 mol·L^-1时,Ni-N-C-800的CO生成选择性在较宽电压窗口内(-0.77到-1.07 V vs. RHE)都高于90%,且具有优良的稳定性。这些结果表明,选择合适的前躯体通过调控热解温度以及氮掺杂可以有效提高镍基MOF衍生催化剂的二氧化碳电催化性能。     

聚 (4-乙烯基吡啶硝酸盐)、硅硫酸和溴化铵催化氧化硫化物生成亚砜

 A new catalytic procedure for the chemoselective oxidation of sulfides to sulfoxides was studied. A variety of aliphatic and aromatic sulfides were subjected to sulfoxidation by combining poly(4-vinyl pyridinium nitrate), silica sulfuric acid (SiO₂-OSO₃H), and catalytic amounts of ammonium bromide in CH₂Cl₂ in the presence of a few drops of water at room temperature. Excellent yields were obtained.     

CO2 capture from binary mixture via forming hydrate with the help of tetra-n-butyl ammonium bromide

Hydrate formation rate and separation effect on the capture of CO2 from binary mixture v/a forming hydrate with 5 wt% tetra-n-butyl ammonium bromide (TBAB) solution were studied.The results showed that the induction time was 5 min,and the hydrate formation process pressure of 7.30 MPa.The CO2 recovery was about 45% in the feed pressure range from 4.30 to 7.30 MPa.Under the feed pressure of 4.30 MPa,the maximum separation factor and CO2 concentration in hydrate phase were 7.3 and 38.2 tool%,respectively.The results demonstrated that TBAB accelerated hydrate formation and enriched CO2 in hydrate phase under the gentle condition.     

Metal‐Doped Nitrogenated Carbon as an Efficient Catalyst for Direct CO2 Electroreduction to CO and Hydrocarbons

This study explores the kinetics, mechanism, and active sites of the CO₂ electroreduction reaction (CO2RR) to syngas and hydrocarbons on a class of functionalized solid carbon‐based catalysts. Commercial carbon blacks were functionalized with nitrogen and Fe and/or Mn ions using pyrolysis and acid leaching. The resulting solid powder catalysts were found to be active and highly CO selective electrocatalysts in the electroreduction of CO₂ to CO/H₂ mixtures outperforming a low‐area polycrystalline gold benchmark. Unspecific with respect to the nature of the metal, CO production is believed to occur on nitrogen functionalities in competition with hydrogen evolution. Evidence is provided that sufficiently strong interaction between CO and the metal enables the protonation of CO and the formation of hydrocarbons. Our results highlight a promising new class of low‐cost, abundant electrocatalysts for synthetic fuel production from CO₂.     

Photochemically-Driven CO2 Release Using a Metastable-State Photoacid for Energy Efficient Direct Air Capture

One of the grand challenges underlying current direct air capture (DAC) technologies relates to the intensive energy cost for sorbent regeneration and CO₂ release, making the massive scale (GtCO₂/year) deployment required to have a positive impact on climate change economically unfeasible. This challenge underscores the critical need to develop new DAC processes with substantially reduced regeneration energies. Here, we report a photochemically-driven approach for CO₂ release by exploiting the unique properties of an indazole metastable-state photoacid (mPAH). Our measurements on simulated and amino acid-based DAC systems revealed the potential of mPAH to be used for CO₂ release cycles by regulating pH changes and associated isomers driven by light. Upon irradiating with moderate intensity light, a ≈55 % and ≈68 % to ≈78 % conversion of total inorganic carbon to CO₂ was found for the simulated and amino acid-based DAC systems, respectively. Our results confirm the feasibility of on-demand CO₂ release under ambient conditions using light instead of heat, thereby providing an energy efficient pathway for the regeneration of DAC sorbents.     

Flame‐retardancy of a Cellulosic Fabric by the Application of Synergistic Effect between Ammonium Bromide and Antimony(III) Oxide

The synergistic effect between ammonium bromide and antimony(III) oxide as a nondurable finish on the flammability of 100% woven plain cotton fabric (with a density of 144 g/m2, the number of yarns 21 per 10 mm), has been investigated in this study. The laundered totally-dried, weighed specimens were impregnated with suitable concentration individual aqueous ammonium bromide and/or antimony(III) oxide suspension solutions and some sets were impregnated with appropriate admixed solutions of the both chemicals. A vertical flame spread test was then carried-out to characterize the flammability of the samples. An acceptable synergistic effect was then experienced by using an admixed bath containing 0.1 molar ammonium bromide and 0.05 unit formal antimony trioxide solutions for impartation of flame-retardancy to a cotton fabric. The optimum mass of the mixture required to impart flame-retardancy was about 3.64 g of anhydrous additives per 100 g of fabric. The results obtained are in favor of Wall Effect Theory. Moreover synergistic effect indicating dehydration of the treated substrate by using this combination via thermogravimetry could be deduced.     

Surface-Modified Carbon Materials for CO2 Electroreduction

The electrochemical reduction of CO₂ to produce sustainable fuels and chemicals has attracted great attention in recent years. It is shown that surface-modified carbons catalyze the CO₂RR. This study reports a strategy to modify the surface of commercially available carbon materials by adding oxygen and nitrogen surface groups without modifying its graphitic structure. Clear differences in CO₂RR activity, selectivity and the turnover frequency between the surface-modified carbons were observed, and these differences were ascribed to the nature of the surface groups chemistry and the point of zero charge (PZC). The results show that nitrogen-containing surface groups are highly selective towards the formation of CO from the electroreduction of CO₂ in comparison with the oxygen-containing surface groups, and the carbon without surface groups. This demonstrates that the selectivity of carbon for CO₂RR can be rationally tuned by simply altering the surface chemistry via surface functionalization.     

湿气源吸附碳捕集: CO2/H2O共吸附机制及应用

大型湿气源排放中普遍存在的水汽是制约吸附碳捕集规模化发展的重要挑战之一。H₂O的极性往往会导致吸附材料的CO₂捕集率降低甚至出现失效,也会造成捕集系统产生温降、压降等寄生损失,甚至形成设备腐蚀、吸附剂中毒等不利影响,最终额外能耗和成本大幅提高。为解决上述挑战,深入理解CO₂与H₂O共吸附过程的作用机制,据此开发成本合理、再生能耗低且对水气不敏感的高效CO₂吸附剂及吸附技术是实现湿气源下高效吸附碳捕集的重要途径。目前,由于分散在多个领域且各有侧重,关于H₂O对CO₂吸附影响的机制分析缺乏汇总与概括,难以形成相对统一的观点。本文针对CO₂与H₂O共吸附过程,从宏观与微观层面进行了详细综述。首先,基于共吸附机制的基础研究,依次介绍了竞争吸附、变湿吸附和呼吸效应领域的研究进展并进行了简要评价。其次,基于共吸附的应用研究,阐述了湿气源CO₂捕集技术的吸附剂研发与工艺改进两部分的现状及进展,也对不同湿气源下CO₂捕集水平进行了简要评价。最后,总结了目前研究中的不足之处并展望了未来的研究方向。本文将分散于各领域的CO₂与H₂O共吸附过程进行集中归纳、分析和对比,或可为湿气源碳捕集技术提供有效的指导。     

Iodic Acid (HIO3) in Combination with Tetraethylammonium Bromide as a Catalyst for Selective and Accelerated Sulfoxidation

The article describes the use of iodic acid in combination with catalytic amounts of tetraethylammonium bromide (TEAB) as a mild and alternative reagent system for oxidation of sulfides to sulfoxides. The salient features of the developed system are room‐temperature reactions, short reaction times, and compatibility with a wide range of functional groups.     

CO2 Capture with Silylated Ethanolamines and Piperazines

Amine treatment is commonly used to capture CO₂ from exhaust gases and from ambient air. The Si−N bond in aminosilanes is capable of reacting with CO₂ more readily than amines. In the current study we have synthesized trimethylsilylated ethanolamines, diethanolamines and piperazines and investigated their reaction toward CO₂. All products were characterized by ¹H, ¹³C, and ²⁹Si NMR, RAMAN spectroscopy as well as mass spectrometry. The product of a twofold CO₂-insertion into bis-trimethylsilylated piperazine was analysed by single-crystal X-ray diffraction. Furthermore, quantum chemical calculations (DFT) were used to supplement the experimental results. Geometry optimizations and NBO calculations for each starting material were carried out at the B3LYP level with different basis sets. DFT calculations at the B3LYP, WB97XD and M062x level were conducted for geometry optimization and frequency calculations to examine the thermochemical data. The calculations were carried out both for the gas phase and in solvent environment. The calculated reaction enthalpies varied between −37 and −107 kJ mol⁻¹, while experimental values around −100 kJ mol⁻¹ were determined.     

Electrocatalytic CO2 Reduction with a Half‐Sandwich Cobalt Catalyst: Selectivity towards CO

We present herein a Cp*Co(III)‐half‐sandwich catalyst system for electrocatalytic CO₂ reduction in aqueous acetonitrile solution. In addition to an electron‐donating Cp* ligand (Cp*=pentamethylcyclopentadienyl), the catalyst featured a proton‐responsive pyridyl‐benzimidazole‐based N,N‐bidentate ligand. Owing to the presence of a relatively electron‐rich Co center, the reduced Co(I)‐state was made prone to activate the electrophilic carbon center of CO₂. At the same time, the proton‐responsive benzimidazole scaffold was susceptible to facilitate proton‐transfer during the subsequent reduction of CO₂. The above factors rendered the present catalyst active toward producing CO as the major product over the other potential 2e/2H⁺ reduced product HCOOH, in contrast to the only known similar half‐sandwich CpCo(III)‐based CO₂‐reduction catalysts which produced HCOOH selectively. The system exhibited a Faradaic efficiency (FE) of about 70% while the overpotential for CO production was found to be 0.78 V, as determined by controlled‐potential electrolysis.     

KI与无机铵盐催化CO2与环氧丙烷合成碳酸丙烯酯

以无毒、合成简单、廉价的无机铵盐(氨基甲酸铵、碳酸氢铵、碳酸铵等)为助催化剂,研究其对卤化钾(KCl、KBr、KI)催化CO2与环氧丙烷合成碳酸丙烯酯(PC)的影响.结果表明,卤化钾与无机铵盐显示出很好的协同催化效应.其中以氨基甲酸铵为助催化剂,KI为主催化剂时,催化合成PC的效果最好.同时考察了催化剂用量、反应温度、CO2初始压力、PC的预加入量、反应时间等因素对反应的影响.在优化条件下,PC收率大于99%.