Molecular Nanoworm with PCL Core and PEO Shell as a Non‐spherical Carrier for Drug Delivery

Core/shell wormlike polymer brushes with densely grafted poly(ϵ‐caprolactone)‐b‐poly(ethylene oxide) (PCL‐b‐PEO) are synthesized via grafting an alkynyl terminated PCL‐b‐PEO (ay‐PCL₁₇‐b‐PEO₁₁₃) onto a well‐defined azido functionalized polymethacrylate (PGA₉₄₀) and are evaluated preliminarily as a single molecular cylindrical vehicle for drug delivery. Water soluble molecular worms of ca. 230 nm are obtained and then the anticancer drug doxorubicin (DOX) is loaded into its PCL core by hydrophobic interaction. Compared with spherical micelles from linear PCL₁₇‐b‐PEO₁₁₃, the brushes demonstrate a lower loading efficiency but a faster release rate of DOX. Confocal laser scanning microscopy measurements show that DOX‐loaded cylindrical molecular brushes can easily enter into HeLa and HepG2 cells in 1 h.     

Syntheses and micellar properties of well‐defined amphiphilic AB2 and A2B Y‐shaped miktoarm star copolymers of ε‐caprolactone and 2‐(dimethylamino)ethyl methacrylate

Well‐defined amphiphilic PCL‐b‐(PDMA)₂ and (PCL)₂‐b‐PDMA Y‐shaped miktoarm star copolymers and PCL‐b‐PDMA linear diblock copolymer were synthesized via a combination of ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP), where PCL is poly (ε‐caprolactone) and PDMA is poly(2‐(dimethylamino)ethyl methacrylate). All of these three types of copolymers have comparable PCL contents and overall molecular weights. The PCL block is hydrophobic while the PDMA block is hydrophilic, and they behave like polymeric surfactants and self‐assemble into PCL‐core micelles in aqueous media. The chain architectural effects on the micellization properties, including the aggregation number, size, polydispersity, and micelle densities of (PCL₂₉)₂‐b‐PDMA₄₅, PCL₆₁‐b‐(PDMA₂₄)₂, and PCL₅₆‐b‐PDMA₄₉ in dilute aqueous solution, were then explored by dynamic and static laser light scattering (LLS). The intensity–average hydrodynamic radius, 〈R_h〉, the aggregation number per micelle, N_agg, and the core radius, R_core, of the PCL‐core micelles all increased in the order PCL₆₁‐b‐(PDMA₂₄)₂ < (PCL₂₉)₂‐b‐PDMA₄₅ < PCL₅₆‐b‐PDMA₄₉. The surface area occupied per soluble PDMA block at the core/corona interface increased in the order PCL₆₁‐b‐(PDMA₂₄)₂ < PCL₅₆‐b‐PDMA₄₉ < (PCL₂₉)₂‐b‐PDMA₄₅. PCL₆₁‐b‐(PDMA₂₄)₂ micelles had the largest overall micelle density, possibly because of that the presence of two soluble PDMA arms at the junction point favors the bending of the core–corona interface and thus the formation of densely‐packed core‐shell nanostructures. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1446–1462, 2007     

Fabrication of Reduction‐Sensitive Amphiphilic Cyclic Brush Copolymer for Controlled Drug Release

The cyclic brush polymers, due to the unique topological structure, have shown in the previous studies higher delivery efficacy than the bottlebrush analogues as carriers for drug and gene transfer. However, to the best of knowledge, the preparation of reduction‐sensitive cyclic brush polymers for drug delivery applications remains unexplored. For this purpose, a reduction‐sensitive amphiphilic cyclic brush copolymer, poly(2‐hydroxyethyl methacrylate‐g‐poly(ε‐caprolactone)‐disulfide link‐poly(oligoethyleneglycol methacrylate)) (P(HEMA‐g‐PCL‐SS‐POEGMA)) with reducible block junctions bridging the hydrophobic PCL middle layer and the hydrophilic POEGMA outer corona is designed and synthesized successfully in this study via a “grafting from” approach using sequential ring‐opening polymerization (ROP) and atom transfer free radical polymerization (ATRP) from a cyclic multimacroinitiator PHEMA. The resulting self‐assembled unimolecular core–shell–corona (CSC) micelles show sufficient salt stability and efficient destabilization in the intracellular reducing environment for a promoted drug release toward a greater therapeutic efficacy relative to the reduction‐insensitive analogues. The overall results demonstrate the reducible cyclic brush copolymers developed herein provides an elegant solution to the tradeoff between extracellular stability and intracellular high therapeutic efficacy toward efficient anticancer drug delivery.     

Synthesis of Star‐Shaped Poly(ϵ‐caprolactone)‐b‐Poly(styrene) Block Copolymer by Combining Ring‐Opening Polymerization and Atom Transfer Radical Polymerization

Newly designed star‐shaped block copolymers made of poly(?‐caprolactone) (PCL) and polystyrene (PS) were synthesized by combining ring‐opening polymerization (ROP) of ?‐caprolactone (CL) and atom transfer radical polymerization (ATRP) of styrene (St). The switch from the first to the second mechanism was obtained by selective transformation of “living” radical sites. First, tri‐ and tetrafunctional initiators were used as an initiator for the “living” ring opening polymerization (ROP) of ?‐caprolactone producing a hydroxyl terminated three or four arm star‐shaped polymer. Next, the OH end groups of PCL star branches were derivatized into 2‐bromoisobutyrate groups which gave rise to the corresponding tri‐ and tetrabromoester ended‐PCL stars; the latter served as macroinitiators for the ATRP of styrene at 110°C in the presence of CuBr/2,2‐bipyridine (Bipy) catalyst system affording star‐shaped block copolymers PCL_n‐b‐PS_n (n=3 or 4). The samples obtained were characterizated by ¹H‐NMR spectroscopy and GPC (gel permeation chromatograph). These copolymers exhibited the expected structure. The crystallization of star‐shaped block copolymers was studied by DSC (differential scanning calorimetry). The results show that when the content of the PS block increased, the T_m of the star‐shaped block copolymer decreased.     

Synthesis,characterization, and micellization of PCL‐g‐PEG copolymers by combination of ROP and “Click” chemistry via “Graft onto” method

Biodegradable and biocompatible PCL‐g‐PEG amphiphilic graft copolymers were prepared by combination of ROP and “click” chemistry via “graft onto” method under mild conditions. First, chloro‐functionalized poly(ε‐caprolactone) (PCL‐Cl) was synthesized by the ring‐opening copolymerization of ε‐caprolactone (CL) and α‐chloro‐ε‐caprolactone (CCL) employing scandium triflate as high‐efficient catalyst with near 100% monomer conversion. Second, the chloro groups of PCL‐Cl were quantitatively converted into azide form by NaN₃. Finally, copper(I)‐catalyzed cycloaddition reaction was carried out between azide‐functionalized PCL (PCL‐N₃) and alkyne‐terminated poly(ethylene glycol) (A‐PEG) to give PCL‐g‐PEG amphiphilic graft copolymers. The composition and the graft architecture of the copolymers were characterized by ¹H NMR, FTIR, and GPC analyses. These amphiphilic graft copolymers could self‐assemble into sphere‐like aggregates in aqueous solution with diverse diameters, which decreased with the increasing of grafting density. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of (AB)n‐, AnBn‐, and AxBy‐type amphiphilic and double‐hydrophilic star copolymers by RAFT polymerization

The synthesis, characterization, and postpolymerization functionalization of star copolymers by RAFT polymerization, using ethylene glycol dimethacrylate as the difunctional monomer for core formation via crosslinking, is presented in this work. The “arm first” approach was used for the synthesis of PDMAEMA_nPOEGMA_n double‐hydrophilic mikto‐arm stars and PDMAEMA_xPLMA_y amphiphilic miktoarm stars, while the “core first” approach was used for the synthesis of (PDMAEMA‐b‐POEGMA)_n double‐hydrophilic star block copolymers. Methyl iodide was used as the quaternizing agent for the transformation of the star copolymers into strong cationic star polyelectrolytes, through reaction on the dimethylamino groups of PDMAEMA blocks. The stars were characterized at the molecular level by SEC and proton nuclear magnetic resonance. Preliminary light scattering experiments, using THF and H₂O as the solvents, were performed in order to get information regarding the solution behavior of the novel star copolymers synthesized. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1771–1783     

Various brush polymers through ring opening metathesis polymerization and nitroxide radical coupling reaction

A 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO)‐terminated poly(ethylene glycol) (PEG) or ‐poly(ε‐caprolactone) (PCL) (PEG₁₁‐TEMPO or PCL₂₃‐TEMPO) is grafted as a side chain onto a ROMP‐generated polyoxanorbornene (PONB) main backbone with bromide pendant groups (PONB₂₀‐Br) using the NRC click reaction to yield related the brush copolymers, PONB₂₀‐g‐PEG₁₁ or PONB₂₀‐g‐PCL₂₃ catalyzed by Cu(I), Cu(0), and N,N,N′,N″,N″‐pentamethyldiethylenetriamine in N,N‐dimethylformamide at room temperature. Additionally, a ROMP‐generated brush copolymer PONB₉‐g‐poly(methyl methacrylate)₂₄ (PMMA)₂₄‐Cl was reacted with a PEG₁₁‐TEMPO or a PCL₂₃‐TEMPO precursor via the NRC click reaction to yield a corresponding brush terpolymer, PONB₉‐g‐(PMMA₂₄‐b‐PEG₁₁) or PONB₉‐g‐(PMMA₂₄‐b‐PCL₂₃) under a similar reaction condition described above. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of AB3‐type miktoarm star polymers with steroid core via a combination of “Click” chemistry and ring opening polymerization techniques

Well‐defined AB₃‐type miktoarm star‐shaped polymers with cholic acid (CA) core were fabricated with a combination of “click” chemistry and ring opening polymerization (ROP) methods. Firstly, azide end‐functional poly(ethylene glycol) (mPEG), poly(methyl methacrylate) (PMMA), polystyrene (PS), and poly(ε‐caprolactone) (PCL) polymers were prepared via controlled polymerization and chemical modification methods. Then, CA moieties containing three OH groups were introduced to these polymers as the end groups via Cu(I)‐catalyzed click reaction between azide end‐functional groups of the polymers ( mPEG‐N₃ , PMMA‐N₃ , PS‐N₃ , and PCL‐N₃ ) and ethynyl‐functional CA under ambient conditions, yielding CA end‐functional polymers ( mPEG‐Cholic , PMMA‐Cholic , PS‐Cholic , and PCL‐Cholic ). Finally, the obtained CA end‐capped polymers were employed as the macroinitiators in the ROP of ε‐caprolactone (ε‐CL) yielding AB₃‐type miktoarm star polymers ( mPEG‐Cholic‐PCL₃ , PMMA‐Cholic‐PCL₃ , and PS‐Cholic‐PCL₃ ) and asymmetric star polymer [ Cholic‐(PCL)₄ ]. The chemical structures of the obtained intermediates and polymers were confirmed via Fourier transform infrared and ¹H nuclear magnetic resonance spectroscopic techniques. Thermal decomposition behaviors and phase transitions were studied in detail using thermogravimetric analysis and differential scanning calorimetry experiments. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3390–3399     

Multiarm star poly(glycidol)‐block‐poly(ε‐caprolactone) of different arm lengths and their use as modifiers of diglycidylether of bisphenol a thermosets

Well‐defined multiarm star copolymers, hyperbranched poly(glycidol)‐b‐poly(ε‐caprolactone), with an average of 100–110 arms per molecule and a molecular weight of arms of 3000 g/mol (PGOH‐b‐PCL₃₀) and 1000 g/mol (PGOH‐b‐PCL₁₀) were synthesized by cationic ring‐opening polymerization of ε‐caprolactone from a poly(glycidol) core and used to modify diglycidylether of bisphenol A formulations. The curing process, studied by dynamic scanning calorimetry, was only slightly retarded when PGOH‐b‐PCL_x were added to the formulation. By rheometry, the effect of this new topology and the arm length on the complex viscosity (η*) and gelation of the reactive mixture was analyzed in detail. The addition of these new reactive modifiers decreases the global shrinkage and increases the conversion at gelation. In addition, the modified thermosets have an improved reworkability. The homogeneity of pure DGEBA and modified thermosets was proved by dynamic thermomechanical analysis and electronic microscopy (FESEM). Addition of star‐like structures led to a more toughened fracture of the thermoset in comparison to pure DGEBA. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of a novel graft copolymer with hyperbranched poly(glycerol) as core and “Y”‐shaped polystyrene‐b‐poly(ethylene oxide)2 as side chains

The graft copolymers composed of “Y”‐shaped polystyrene‐b‐poly(ethylene oxide)₂ (PS‐b‐PEO₂) as side chains and hyperbranched poly(glycerol) (HPG) as core were synthesized by a combination of “click” chemistry and atom transfer radical polymerization (ATRP) via “graft from” and “graft onto” strategies. Firstly, macroinitiators HPG‐Br were obtained by esterification of hydroxyl groups on HPG with bromoisobutyryl bromide, and then by “graft from” strategy, graft copolymers HPG‐g‐(PS‐Br) were synthesized by ATRP of St and further HPG‐g‐(PS‐N₃) were prepared by azidation with NaN₃. Then, the precursors (Bz‐PEO)₂‐alkyne with a single alkyne group at the junction point and an inert benzyl group at each end was synthesized by sequentially ring‐opening polymerization (ROP) of EO using 3‐[(1‐ethoxyethyl)‐ethoxyethyl]‐1,2‐propanediol (EEPD) and diphenylmethylpotassium (DPMK) as coinitiator, termination of living polymeric species by benzyl bromide, recovery of protected hydroxyl groups by HCl and modification by propargyl bromide. Finally, the “click” chemistry was conducted between HPG‐g‐(PS‐N₃) and (Bz‐PEO)₂‐alkyne in the presence of N,N,N′,N″,N”‐pentamethyl diethylenetriamine (PMDETA)/CuBr system by “graft onto” strategy, and the graft copolymers were characterized by SEC, ¹H NMR and FTIR in details. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Well‐defined polyolefin/poly(ε‐caprolactone) diblock copolymers: New synthetic strategy and application

A new synthetic strategy, the combination of living polymerization of ylides and ring‐opening polymerization (ROP), was successfully used to obtain well‐defined polymethylene‐b‐poly(ε‐caprolactone) (PM‐b‐PCL) diblock copolymers. Two hydroxyl‐terminated polymethylenes (PM‐OH, M_n= 1800 g mol^?1 (PDI = 1.18) and M_n = 6400 g mol^?1 (PDI = 1.14)) were prepared using living polymerization of dimethylsulfoxonium methylides. Then, such polymers were successfully transformed to PM‐b‐PCL diblock copolymers by using stannous octoate as a catalyst for ROP of ε‐caprolactone. The GPC traces and ¹H NMR of PM‐b‐PCL diblock copolymers indicated the successful extension of PCL segment (M_n of PM‐b‐PCL = 5200–10,300 g mol^?1; PDI = 1.06–1.13). The thermal properties of the double crystalline diblock copolymers were investigated by differential scanning calorimetry (DSC). The results indicated that the incorporation of crystalline segments of PCL chain effectively influence the crystalline process of PM segments. The low‐density polyethylene (LDPE)/PCL and LDPE/polycarbonate (PC) blends were prepared using PM‐b‐PCL as compatibilizer, respectively. The scanning electron microscopy (SEM) observation on the cryofractured surface of such blend polymers indicates that the PM‐b‐PCL diblock copolymers are effective compatibilizers for LDPE/PCL and LDPE/PC blends. Porous films were fabricated via the breath‐figure method using different concentration of PM‐b‐PCL diblock copolymers in CH₂Cl₂ under a static humid condition. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of crystalline graft polymer poly(ethylene oxide)‐g‐poly(ɛ‐caprolactone)2 with modulated grafting sites

The graft polymer poly(ethylene oxide)‐g‐poly(?‐caprolactone)₂ (PEO‐g‐PCL₂) with modulated grafting sites was synthesized by the combination of ring‐opening polymerization (ROP) mechanism, efficient Williamson reaction, with thiol–ene addition reaction. First, the precursor of PEO‐Allyl‐PEO with two terminal hydroxyl groups and one middle allyl group was prepared by ROP of EO monomers. Then, the macroinitiator [PEO‐(OH)₂‐PEO]_s was synthesized by sequential Williamson reaction between terminal hydroxyl groups and thiol–ene addition reaction on pendant allyl groups. Finally, the graft polymer PEO‐g‐PCL₂ was obtained by ROP of ?‐CL monomers using [PEO‐(OH)₂‐PEO]_s as macroinitiator. The target graft polymer and all intermediates were well characterized by the measurements of gel permeation chromatography, ¹H NMR, and thermal gravimetric analysis. The crystallization behavior was investigated by the measurements of differential scanning calorimetry, wide‐angle X‐ray diffraction and polarized optical microscope. The results showed that when the PCL content of side chains reached 59.2%, the crystalline structure had been dominated by PCL part and the crystalline structure formed by PEO part can be almost neglected. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2239–2247     

Synthesis and characterization of well‐defined ABC 3‐Miktoarm star‐shaped terpolymers based on poly(styrene), poly(ethylene oxide), and poly(ϵ‐caprolactone) by combination of the “living” anionic polymerization with the ring‐opening polymerization

A series of well‐defined ABC 3‐Miktoarm star‐shaped terpolymers [Poly(styrene)‐Poly(ethylene oxide)‐Poly(ε‐caprolactone)](PS‐PEO‐PCL) with different molecular weight was synthesized by combination of the “living” anionic polymerization with the ring‐opening polymerization (ROP) using macro‐initiator strategy. Firstly, the “living” poly(styryl)lithium (PS^?Li⁺) species were capped by 1‐ethoxyethyl glycidyl ether(EEGE) quantitatively and the PS‐EEGE with an active and an ethoxyethyl‐protected hydroxyl group at the same end was obtained. Then, using PS‐EEGE and diphenylmethylpotassium (DPMK) as coinitiator, the diblock copolymers of (PS‐b‐PEO)_p with the ethoxyethyl‐protected hydroxyl group at the junction point were achieved by the ROP of EO and the subsequent termination with bromoethane. The diblock copolymers of (PS‐b‐PEO)_d with the active hydroxyl group at the junction point were recovered via the cleavage of ethoxyethyl group on (PS‐b‐PEO)_p by acidolysis and saponification successively. Finally, the copolymers (PS‐b‐PEO)_d served as the macro‐initiator for ROP of ε‐CL in the presence of tin(II)‐bis(2‐ethylhexanoate)(Sn(Oct)₂) and the star(PS‐PEO‐PCL) terpolymers were obtained. The target terpolymers and the intermediates were well characterized by ¹H‐NMR, MALDI‐TOF MS, FTIR, and SEC. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1136–1150, 2008     

Regulation of Micellar Morphology of PCL‐b‐PEO Block Copolymers by Crystallization Temperature

The effect of crystallization temperature on the micellar morphology of PCL‐b‐PEO block copolymers in water has been studied. It is found that the micellar morphology of PCL_nPEO₄₄ and PCL_nPEO₁₁₃ changes with crystallization temperature in different ways because of two competitive factors: perfection of the PCL crystals in the core and deformation of the soluble PEO block. For PCL_nPEO₄₄, perfection of the PCL crystals dominates the micellar morphology and lamellar micelles are formed at a higher crystallization temperature. For PCL_nPEO₁₁₃ the micellar morphology is mainly determined by the tethering density and spherical micelles or cylindrical micelles with a larger length/diameter ratio are formed at a higher crystallization temperature because of the larger tethering density.

     

Synthesis of amphiphilic biodegradable glycocopolymers based on poly(ε‐caprolactone) by ring‐opening polymerization and click chemistry

Amphiphilic, biodegradable block glycopolymers based on poly(ε‐caprolactone) (PCL) with various pendent saccharides were synthesized by combination of ring‐opening polymerization (ROP) and “click” chemistry. PCL macroinitiators obtained by ROP of ε‐caprolactone were used to initiate the ROP of 2‐bromo‐ε‐caprolactone (BrCL) to get diblock copolymers, PCL‐b‐PBrCL. Reaction of the block copolymers with sodium azide converted the bromine groups in the PBrCL block to azide groups. In the final step, click chemistry of alkynyl saccharides with the pendent azide groups of PCL‐b‐PBrCL led to the formation of the amphiphilic block glycopolymers. These copolymers were characterized by ¹H NMR spectroscopy and gel permeation chromatography. The self‐assembly behavior of the amphiphilic block copolymers was investigated using transmission electron microscopy and atomic force microscope, spherical aggregates with saccharide groups on the surface were observed, and the aggregates could bind reversibly with Concanavalin A. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3583–3594, 2009     

Synthesis and Properties of Degradable Copolymers Composed of Poly(ε‐caprolactone) and 3,4‐Dihydroxycinnamic Acid

Photoreactive and degradable hyperbranched (HB) copolymers with various 3,4‐dihydroxycinnamic acid (DHCA) compositions, poly(ε‐caprolactone)‐co‐poly(3,4‐dihydroxycinnamic acid) (PCL‐co‐PDHCA), were obtained by thermal melt‐polycondensation of PCL and DHCA. The HB structures and the branching degree (BD) of the PCL‐co‐PDHCA copolymers were confirmed by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (¹H NMR). The melting points (T_m) of the PCL‐co‐PDHCA copolymers changed depending on the PCL and DHCA composition by differential scanning calorimetry (DSC) measurements. Wide angle X‐ray diffraction (WXRD) analysis showed semi‐crystalline of the PCL and PCL‐co‐PDHCA polymers. The PCL‐co‐PDHCA copolymers showed good photoreactivities and fluorescent properties. Crosslinking of the cinnamoyl groups in the copolymers caused by UV irradiation affected the thermal stability and wettability slightly. Moreover, the hydrolysis experiments revealed that copolymers are facile degradable.     

Quadruple click reactions for the synthesis of cysteine‐terminated linear multiblock copolymers

Synthesis of cysteine‐terminated linear polystyrene (PS)‐b‐poly(ε‐caprolactone) (PCL)‐b‐poly(methyl methacrylate) (PMMA)/or poly(tert‐butyl acrylate)(PtBA)‐b‐poly(ethylene glycol) (PEG) copolymers was carried out using sequential quadruple click reactions including thiol‐ene, copper‐catalyzed azide–alkyne cycloaddition (CuAAC), Diels–Alder, and nitroxide radical coupling (NRC) reactions. N‐acetyl‐L ‐cysteine methyl ester was first clicked with α‐allyl‐ω‐azide‐terminated PS via thiol‐ene reaction to create α‐cysteine‐ω‐azide‐terminated PS. Subsequent CuAAC reaction with PCL, followed by the introduction of the PMMA/or PtBA and PEG blocks via Diels–Alder and NRC, respectively, yielded final cysteine‐terminated multiblock copolymers. By ¹H NMR spectroscopy, the DP_ns of the blocks in the final multiblock copolymers were found to be close to those of the related polymer precursors, indicating that highly efficient click reactions occurred for polymer–polymer coupling. Successful quadruple click reactions were also confirmed by gel permeation chromatography. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Hyperbranched block copolymer from AB2 macromonomer: Synthesis and its reaction‐induced microphase separation in epoxy thermosets

In this contribution, we reported the synthesis of a hyperbranched block copolymer composed of poly(ε‐caprolactone) (PCL) and polystyrene (PS) subchains. Toward this end, we first synthesized an α‐alkynyl‐ and ω,ω′‐diazido‐terminated PCL‐b‐(PS)₂ macromonomer via the combination of ring‐opening polymerization and atom transfer radical polymerization. By the use of this AB₂ macromonomer, the hyperbranched block copolymer (h‐[PCL‐b‐(PS)₂]) was synthesized via a copper‐catalyzed Huisgen 1,3‐dipolar cycloaddition (i.e., click reaction) polymerization. The hyperbranched block copolymer was characterized by means of ¹H nuclear magnetic resonance spectroscopy and gel permeation chromatography. Both differential scanning calorimetry and atomic force microscopy showed that the hyperbranched block copolymer was microphase‐separated in bulk. While this hyperbranched block copolymer was incorporated into epoxy, the nanostructured thermosets were successfully obtained; the formation of the nanophases in epoxy followed reaction‐induced microphase separation mechanism as evidenced by atomic force microscopy, small angle X‐ray scattering, and dynamic mechanical thermal analysis. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 368–380     

“Click” synthesis of thermally stable au nanoparticles with highly grafted polymer shell and control of their behavior in polymer matrix

Thermally stable core–shell gold nanoparticles (Au NPs) with highly grafted polymer shells were synthesized by combining reversible addition‐fragmentation transfer (RAFT) polymerization and click chemistry of copper‐catalyzed azide‐alkyne cycloaddition (CuAAC). First, alkyne‐terminated poly(4‐benzylchloride‐b‐styrene) (alkyne‐PSCl‐b‐PS) was prepared from the alkyne‐terminated RAFT agent. Then, an alkyne‐PSCl‐b‐PS chain was coupled to azide‐functionalized Au NPs via the CuAAC reaction. Careful characterization using FT‐IR, UV–Vis, and TGA showed that PSCl‐b‐PS chains were successfully grafted onto the Au NP surface with high grafting density. Finally, azide groups were introduced to PSCl‐b‐PS chains on the Au NP surface to produce thermally stable Au NPs with crosslinkable polymer shell ( Au‐PSN₃‐b‐PS 1 ). As the control sample, PS‐b‐PSN₃‐coated Au NPs ( Au‐PSN₃‐b‐PS 2 ) were made by the conventional “grafting to” approach. The grafting density of polymer chains on Au‐PSN₃‐b‐PS 1 was found to be much higher than that on Au‐PSN₃‐b‐PS 2 . To demonstrate the importance of having the highly packed polymer shell on the nanoparticles, Au‐PSN₃‐b‐PS 1 particles were added into the PS and PS‐b‐poly(2‐vinylpyridine) matrix, respectively. Consequently, it was found that Au‐PSN₃‐b‐PS 1 nanoparticles were well dispersed in the PS matrix and PS‐b‐P2VP matrix without any aggregation even after annealing at 220 °C for 2 days. Our simple and powerful approach could be easily extended to design other core–shell inorganic nanoparticles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Diels‐alder click reaction for the preparation of polycarbonate block copolymers

The Diels‐Alder reaction as a click reaction strategy is applied to the preparation of well‐defined polycarbonate (PC)‐block copolymers. A well‐defined α‐anthracene‐terminated polycarbonate (PC‐anthracene) is prepared using 9‐anthracene methanol as an initiator in the ring opening polymerization of benzyl 5‐methyl‐2‐oxo‐1,3‐dioxane‐5‐carboxylate in CH₂Cl₂ at room temperature for 5 h. Next, a well‐defined α‐furan protected maleimide‐terminated‐poly(ethylene glycol) (PEG₁₁‐MI or PEG₃₇‐MI), ‐poly(methyl methacrylate) (PMMA₂₆‐MI), and ‐poly(ε‐caprolactone) (PCL₂₇‐MI) were clicked with the PC‐anthracene at reflux temperature of toluene to yield their corresponding PC‐based block copolymers (PC‐b‐PEG, PC‐b‐PMMA, and PC‐b‐PCL). The homopolymer precursors and their block copolymers were characterized by using the GPC, NMR and UV analysis. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013