MALDI‐ and LDI‐MS saponin fingerprint of leaves and stick components of commercial yerba mate (Ilex paraguariensis)

Yerba mate (YM) is massively produced and consumed as an infusion in South America and spreading all over the world. This product is obtained from dried leaves of Ilex paraguariensis Saint Hilaire, mixed with fragments of dried branches (sticks). For its commercialization, YM must have a minimum percentage of leaves because its presence determines YM quality and price. Till today, a mechanical methodology to determine the relative amount of components (sticks, leaves, and powder) is used. There is not any modern analytical method that provides information for quick characterization of the YM components. Typical saponin fingerprints for leaves and sticks were found by using ultraviolet matrix‐assisted laser desorption ionization and ultraviolet laser desorption ionization mass spectrometry. Then, their possible application as useful tools for quick characterization of components of commercial YM (leaves and sticks) is presented. Furthermore, fingerprints obtained from authentic samples of Ilex paraguariensis and Ilex dumosa are also included and discussed. Each Ilex show typical saponin fingerprints for leaves and sticks.     

Genipin‐Cross‐Linked Chitosan as a Support for Laccase Biosensor

In this study a biosensor with laccase immobilized in a chitosan matrix was developed. Prior to the laccase immobilization the chitosan was cross‐linked with genipin, a naturally‐occurring cross‐linking agent, and incorporated into a carbon‐paste electrode. Analytical parameters for caffeic acid, such as repeatability (2.7 %), reproducibility (3.0 %), linearity (0.27 and 33 µM; r²≥0.9983), limit of detection (LOD=0.18 µM) and recovery (96–103 %), were determined. The method was applied in the determination of the total phenolic content of mate herb samples. The good performance of the method can be attributed to the effective immobilization of laccase in the cross‐linked support.     

Composition and Antimicrobial Activity of Ilex Leaves Water Extracts

Plants from the Ilex genus are known for properties such as antimicrobial and anti-inflammatory activity, can act as antiobesity agents and thus can be helpful in medicine. Some holly species, such as Ilex paraguariensis (widely known in the form of popular beverage: yerba mate), have been investigated, while others have been partially researched or remain unknown. Therefore, we performed qualitative and quantitative phytochemical analyses and screened antimicrobial properties of lesser-studied species (I. aquifolium L., I. aquifolium ‘Argentea Marginata’ and I. × meserveae ‘Blue Angel’). I. paraguariensis was used as a standard species for comparison purposes. Investigations were performed on water extracts due to their expected activity and composition. Antimicrobial research included evaluating minimal inhibitory, bactericidal (Staphylococcus aureus and Escherichia coli) and fungicidal concentration (Candida albicans, Alternaria alternata, Fusarium oxysporum, and Aspergillus niger) of extracts. The influence of the extracts on the production, eradication, and viability of bacterial biofilms was also analysed. It was established that Ilex paraguariensis possesses the richest profile of hydroxycinnamic acids derivatives in terms of component concentration and diversity. Ilex spp., especially I. × meserveae, contain a slightly higher amount of flavonoids and more different flavonoid derivatives than I. paraguariensis. However, the strongest antibacterial activity was shown by I. aquifolium L. and its cultivar ‘Argentea Marginata’ in terms of minimal inhibitory, bactericidal and fungicidal concentration, and biofilm assays. Extracts from both species significantly reduced the biofilm viability of S. aureus as well, which may be of use in the production of multicomponent lavaseptics, antiseptics, diuretics (supporting urinary tract infection therapy) and, due to their action on fungi, additives to growth media for specific fungi. The significant content of saponins enables Ilex extracts to be used as natural emulsifiers, for example, in cosmetics. Moreover, relatively high chlorogenic acid and rutin content may suggest use of Ilex spp. to treat obesity, digestive problems, in chemoprevention, and as preservatives in the food industry.     

Bifunctional‐Thiourea‐Catalyzed Diastereo‐ and Enantioselective Aza‐Henry Reaction

Bifunctional thiourea 1 a catalyzes aza‐Henry reaction of nitroalkanes with N‐Boc‐imines to give syn‐β‐nitroamines with good to high diastereo‐ and enantioselectivity. Apart from the catalyst, the reaction requires no additional reagents such as a Lewis acid or a Lewis base. The N‐protecting groups of the imines have a determining effect on the chirality of the products, that is, the reaction of N‐Boc‐imines gives R adducts as major products, whereas the same reaction of N‐phosphonoylimines furnishes the corresponding S adducts. Various types of nitroalkanes bearing aryl, alcohol, ether, and ester groups can be used as nucleophiles, providing access to a wide range of useful chiral building blocks in good yield and high enantiomeric excess. Synthetic versatility of the addition products is demonstrated by the transformation to chiral piperidine derivatives such as CP‐99,994.     

Molecular Weight Development in Free‐Radical Polymerization with Polyfunctional Chain‐Transfer Agents, 1. Equal Reactivity Model

The analytic expression for the weight‐average molecular weight development in free‐radical polymerization that involves a polyfunctional chain‐transfer agent is proposed. Free‐radical polymerization is kinetically controlled; therefore, the probability of chain connection with a polyfunctional chain‐transfer agent as well as the primary chain‐length distribution changes during the course of polymerization. We consider the primary chains formed at different times as different types of chains, and the heterochain branching model is used to obtain the weight‐average chain length at a given conversion level in a matrix formula, described as P_w = W { D _w + ( I + T ) SP ( I – TSP )^–1 D_f }. Because the primary chains are formed consecutively, the number of chain types N is extrapolated to infinity, but such extrapolation can be conducted with the calculated values for only three different N values. The criterion for the onset of gelation is simply described as a point at which the largest eigenvalue of the product of matrixes, TSP reaches unity, i. e., det  ( I – TSP ) = 0. The present model can readily be extended for the star‐shaped polyfunctional initiators, and the relationships between the model parameters and kinetic rate expression for such reaction systems are also shown.     

Multiple‐Well,multiple‐path unimolecular reaction systems. II. 2‐methylhexyl free radicals

Vibrationally excited 2‐methylhexyl radicals formed by shock wave activation or by chemical activation can isomerize by multiple pathways to form any of six stable isomers, can fragment by multiple C? H and C? C bond fission pathways, and can be collisionally stabilized. Master equation simulations of chemical activation and of shock wave activation are used to explore the generic behavior of this complicated coupled system. Selecting the argon pressure in chemical activation systems that produce the 2‐methyl‐1‐hexyl radical isomer ( 1 ) can control the yield of specific isomers. Shock heating of 1 also shows a highly regular sequence of isomer formation. This regular behavior is because the first isomerization steps are faster than subsequent steps. Other radical isomers, such as 2‐methyl‐3‐hexyl ( 3 ), do not show such regular behavior, because the first isomerization step is slower than subsequent steps. Incubation and unimolecular rate‐constant fall‐off are observed in the shock wave simulations. The unimolecular rate‐constant fall‐off for the coupled system produces low‐pressure limiting rate constants proportional to [M]ⁿ, where n can be greater than unity. The fact that n can be greater than unity is a natural feature of multichannel coupled unimolecular reaction systems, but detection of the effect in experiments may be very demanding. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 246–261, 2001     

LC‐PDA‐ESI‐MSn analysis of phenolic and iridoid compounds from Globularia spp.

Plants produce a great number of metabolites with potentially useful biological activities. Species from the genus Globularia (Plantaginaceae) are known as sources of different phenolic and iridoid compounds. Globularia alypum L. is a medicinal plant used as a healing agent in many Mediterranean countries. Similarities in phytochemical composition are often observed for related species. For Globularia spp., such findings were mostly based on identification of several isolated compounds from distinct species. To our knowledge, this is the first study that enables simultaneous comparison of phytochemical profiles from several members of the genus Globularia. Liquid chromatography‐photodiode array detection‐electrospray ionization‐tandem mass spectrometry was used for the analysis of methanolic extracts of aerial parts obtained from four Globularia species (G. alypum, G. punctata, G. cordifolia and G. meridionalis). In total, 85 compounds were identified or tentatively identified based on comparison of their retention time, UV and MSⁿ (up to MS⁴) spectra to those of standard compounds and/or to literature data. Among these, high relative amounts of bioactive molecules such as globularin, globularifolin, asperuloside and verbascoside (acteoside) were found. Apart from providing new insights into the phytochemistry and chemotaxonomy of selected Globularia species, results of this study complement existing MS/MS spectral data and could enable easier mass spectrometric profiling of certain bioactive compounds such as iridoids and phenylethanoids in related plant species, genera and families. Copyright © 2016 John Wiley & Sons, Ltd.     

Time‐resolved crystallization study of absorbable polymers by synchrotron small‐angle X‐ray scattering

Changes in the lamellar morphology that occurred during the quiescent isothermal crystallization of absorbable poly(p‐dioxanone) (PDS) and PDS/poly(glycolide) block copolymer were studied by synchrotron small‐angle X‐ray scattering. Important morphological parameters such as the lamellar long period, the thicknesses of the crystal and amorphous phases, and the scattering invariant were estimated as a function of time, and trends observed over a wide range of experimental conditions are discussed. Thicker but more perfect lamellae were detected at higher crystallization temperatures. The breadth of the normalized semilog Lorentz‐corrected intensity peak systematically decreased with increasing temperature. In addition, the values of the crystallization half‐time and the Avrami exponent (n = 2.5), determined from the real‐time changes in the lamellar development, showed superb agreement with the bulk crystallinity data generated from other experimental techniques, such as calorimetry and dielectric relaxation spectroscopy. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 153–167, 2001     

The synthesis of n‐substituted isothiazol‐3(2h)‐ones from nsubstituted 3‐benzoylpropionamides

N‐Substituted isothiazol‐3(2H)‐ones can be easily prepared from N‐substituted 3‐benzoylpropi‐onamides in two experimentally simple steps, in satisfactory overall yields. Reaction of the amides with excess thionyl chloride results in the formation of N‐substituted 5‐benzoylisothiazol‐3(2H)‐ones, which are readily debenzoylated with alkali to the corresponding N‐substituted isothiazol‐3(2H)‐ones. This method has now been successfully applied to the synthesis of isothiazolones N‐substituted with a bulky alkyl group, such as the tert‐butyl group, and with a phenyl group bearing either a strong electron‐withdrawing substituent, such as the 3‐nitrophenyl and 4‐nitrophenyl group, or an electron‐releasing substituent, such as the 4‐methylphenyl and 4‐methoxyphenyl group.     

Functional copolymer/organo‐MMT nanoarchitectures. XIX. Nanofabrication and characterization of poly(MA‐alt‐1‐octadecene)‐g‐PLA layered silicate nanocomposites with nanoporous core–shell morphology

Novel bioengineering functional copolymer‐g‐biopolymer‐based layered silicate nanocomposites were fabricated by catalytic interlamellar bulk graft copolymerization of L‐lactic acid (LA) monomer onto alternating copolymer of maleic anhydride (MA) with 1‐octadecene as a reactive matrix polymer in the presence of preintercalated LA…organo‐MMT clay (reactive ODA‐MMT and non‐reactive DMDA‐MMT) complexes as nanofillers and tin(oct)₂ as a catalyst under vacuum at 80°C. To characterize the functional copolymer layered silicate nanocomposites and understand the mechanism of in situ processing, interfacial interactions and nanostructure formation in these nanosystems, we have utilized a combination of variuous methods such as FT‐IR spectroscopy, X‐ray diffraction (XRD), dynamic mechanical (DMA), thermal (DSC and TGA‐DTG), SEM and TEM morphology. It was found that in situ graft copolymerization occurred through the following steps: (i) esterification of anhydride units of copolymer with LA; (ii) intercalation of LA between silicate galleries; (iii) intercalation of matrix copolymer into silicate layers through in situ amidization of anhydride units with octadecyl amine intercalant; and (iv) interlamellar graft copolymerization via in situ intercalating/exfoliating processing. The main properties and observed micro‐ and nanoporous surface and internal core–shell morphology of the nanocomposites significantly depend on the origin of MMT clays and type of in situ processing (ion exchanging, amidization reaction, strong H‐bonding and self‐organized hydrophobic/hydrophilic interfacial interactions). This developed approach can be applied to a wide range of anhydride‐containing copolymers such as random, alternating and graft copolymers of MA to synthesize new generation of polymer‐g‐biopolymer silicate layered nanocomposites and nanofibers for nanoengineering and nanomedicine applications. Copyright © 2014 John Wiley & Sons, Ltd.     

Polymerization of 1,3‐dienes with functional groups. III. Free‐radical polymerization of N,N‐diethyl‐2‐methylene‐3‐butenamide

Free‐radical homo‐ and copolymerization behavior of N,N‐diethyl‐2‐methylene‐3‐butenamide (DEA) was investigated. When the monomer was heated in bulk at 60 °C for 25 h without initiator, rubbery, solid gel was formed by the thermal polymerization. No such reaction was observed when the polymerization was carried out in 2 mol/L of benzene solution with with 1 mol % of azobisisobutyronitrile (AIBN) as an initiator. The polymerization rate (R_p) equation was R_p ∝ [DEA]^1.1[AIBN]^0.51, and the overall activation energy of polymerization was calculated 84.1 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure where both 1,4‐E and 1,4‐Z structures were included. From the product analysis of the telomerization with tert‐butylmercaptan as a telogen, the modes of monomer addition were estimated to be both 1,4‐ and 4,1‐addition. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were also carried out in benzene solution at 60 °C. In the copolymerization with styrene, the monomer reactivity ratios obtained were r₁ = 5.83 and r₂ = 0.05, and the Q and e values were Q = 8.4 and e = 0.33, respectively. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 999–1007, 2004     

pH‐dependent Interaction of Rhodopsin with Cyanidin‐3‐glucoside. 2. Functional Aspects†

Anthocyanins are a class of phytochemicals that confer color to flowers, fruits, vegetables and leaves. They are part of our regular diet and serve as dietary supplements because of numerous health benefits, including improved vision. Recent studies have shown that the anthocyanin cyanidin‐3‐O‐glucoside (C3G) increased regeneration of the dim‐light photoreceptor rhodopsin (Matsumoto et al. [2003] J. Agric. Food Chem., 51 , 3560–3563). In an accompanying study (Yanamala et al. [2009] Photochem. Photobiol.), we show that C3G directly binds to rhodopsin in a pH‐dependent manner. In this study, we investigated the functional consequences of C3G binding to rhodopsin. As observed previously in rod outer segments, regeneration of purified rhodopsin in detergent micelles is also accelerated in the presence of C3G. Thermal denaturation and stability studies using circular dichroism, fluorescence and UV/visible absorbance spectroscopy show that C3G exerts a destabilizing effect on rhodopsin structure while it only modestly alters G‐protein activation and the rates at which the light‐activated Metarhodopsin II state decays to opsin and free retinal. These results indicate that the mechanism of C3G‐enhanced regeneration may be based on changes in opsin structure promoting access to the retinal binding pocket.     

Heterochain model for simultaneous long‐chain branching and crosslinking. II. Application to free‐radical polymerization

The matrix formula developed in the context of hetrochain theory, M?_w = M?_wp + WF ( I ? M )^?1 S , was applied to describe the molecular weight development during free‐radical homopolymerization. All of the required probabilistic parameters are expressed in terms of the kinetic‐rate constants and various concentrations. In free‐radical polymerization, the primary chains are formed consecutively, and the number of heterochain types, N, is extrapolated to infinity. Practically, such extrapolation can be conducted on the basis of the calculated values for only three different N values with sufficient accuracy. This matrix formula is valid regardless of the chemical and reactor systems used, as long as the primary chain‐connection statistics is considered Markovian. The gel point can be determined simply by solving an equation det( I ? M ) = 0. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2791–2800, 2004     

Nonaqueous dispersion polymerization of styrene in methanol with the ionomer block copolymer poly[(4‐methylstyrene)‐co‐(4‐vinyltriethylbenzyl ammonium bromide)]‐b‐polyisobutene as a stabilizer

The nonaqueous dispersion polymerization of styrene in methanol with poly[(4‐methylstyrene)‐co‐(4‐vinyltriethylbenzyl ammonium bromide)]‐b‐polyisobutene as a stabilizer was investigated. There was no observable inducing period or autoacceleration in the polymerization process. The conversion increased almost linearly with the polymerization time as high as 80%. The average sizes of the obtained polystyrene particles increased, and the size distributions of the polystyrene particles tended to become narrower, with increasing conversion. The mechanism of the dispersion polymerization in the presence of polyisobutene‐b‐poly[(4‐methylstyrene)‐co‐(4‐vinyltriethylbenzyl ammonium bromide)] was nucleation/growth. When the stabilizer/monomer ratio (w/w) was greater than 2.0%, the polystyrene dispersion was stable, and there was no observable polymer particle coagulation taking place during the whole polymerization process. The average diameter of the polymer particles can be mediated through changes in the polymerization conversion, monomer, and stabilizer. Nearly monodispersed polystyrene particles with average diameters of approximately 0.45–2.21 μm were obtained under optimal conditions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2678–2685, 2004     

Long‐term X‐ray stimulated crystallization of poly(N‐methyldodecano‐12‐lactam) in blend with poly(styrene‐stat‐acrylic acid)

The effect of X‐ray irradiation on crystallization of the blend of poly(N‐methyldodecano‐12‐lactam) (PMDL) with 29.5% of statistical copolymer poly(styrene‐stat‐acrylic acid) (PSAA) was studied using DSC, WAXD, and solid‐state ¹³C NMR methods. Significant acceleration of crystallization was found in the as‐prepared X‐ray irradiated (XI), that is, WAXD‐measured, samples compared with the nonirradiated (NI) ones. In the XI blend, the incubation period was shortened and crystallization proceeded at significantly higher rate. In the asymptote, after 100–120 days, both NI and XI samples reached the same final crystallinity of about 18%. The second DSC runs indicated that the stimulating effect of X‐ray irradiation was eliminated by heating the sample during the first run. The ¹³C NMR studies have shown that PMDL chains crystallize exclusively in cis conformation on the C? N bond. Both in neat PMDL and in the blend with PSAA, the XI samples contained a significantly higher proportion of cis conformers in amorphous phase than the NI samples. It is suggested that energy absorbed by the sample during the standard WAXD measurement helps overcome the barrier of the trans/cis transition in the PMDL molecules. This opens the way to the formation of a higher number of critical equilibrium nuclei and, finally, results in accelerated crystallization of the XI samples. No irreversible changes were found in the XI samples. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 311–321, 2008     

PHI: A powerful new program for the analysis of anisotropic monomeric and exchange‐coupled polynuclear d‐ and f‐block complexes

A new program, PHI, with the ability to calculate the magnetic properties of large spin systems and complex orbitally degenerate systems, such as clusters of d‐block and f‐block ions, is presented. The program can intuitively fit experimental data from multiple sources, such as magnetic and spectroscopic data, simultaneously. PHI is extensively parallelized and can operate under the symmetric multiprocessing, single process multiple data, or GPU paradigms using a threaded, MPI or GPU model, respectively. For a given problem PHI is been shown to be almost 12 times faster than the well‐known program MAGPACK, limited only by available hardware. © 2013 Wiley Periodicals, Inc.     

A positron annihilation study on the microstructure of cyanate ester resin toughened by carboxyl‐terminated butadiene‐acrylonitrile rubber system

The toughness of cyanate ester (CE) resin matrix improves significantly with the addition of carboxyl‐terminated butadiene‐acrylonitrile rubber (CTBN). The curing behavior of the system was studied by differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) spectroscopy. The results show that carboxyl groups on the CTBN chain have a slight activation effect on the CE curing reaction at the beginning of the curing process. Phase separation was found to be the main toughening mechanism for CE/CTBN composites. The existence of macro‐size pores induced by the decomposition of a small amount of the low weight molecular part of CTBN might be another toughening mechanism. It is confirmed that positron annihilation lifetime spectroscopy (PALS) is still valid in such a system where macropores filled with gas molecules exist. When a high weight percentage of CTBN (>8%) was added to CE, free‐positron annihilation was found to be the dominant annihilation process in the macropores. For CTBN weight percentage higher than 8%, the contribution of ortho‐positronium (o‐Ps) annihilation in the macropores to τ₃ and I₃ was found to be insignificant. It is effective to use PALS as a probe of free‐volume properties in such systems by determining the changes in the τ₃ and I₃ of the composite. The compatibility and interfacial adhesion of the composites can be estimated from the changes in the free‐volume properties of the composites. Copyright © 2008 John Wiley & Sons, Ltd.     

New Methacryloxy N‐Vinyl‐2‐pyrrolidinone‐ and Lactone‐Based Macromers

New ω‐methacryloxy‐terminated N‐vinyl‐2‐pyrrolidinone oligomers were prepared by reaction of the corresponding ω‐hydroxy‐terminated N‐vinyl‐2‐pyrrolidinone oligomers with 2‐[(1‐imidazolyl)formyloxy] ethyl methacrylate (HEMA‐Im). The oligomeric precursor had been obtained by radical chain transfer polymerization making use of isopropoxyethanol as a solvent and a chain transfer agent. α,ω‐Dimethacryloxy‐terminated ε‐caprolactone and δ‐valerolactone oligomers were also prepared by reaction of their α‐hydroxy‐ω‐methacryloxy‐terminated precursors with HEMA‐Im. These had been in turn synthesized by ring‐opening polymerization of the corresponding lactones in the presence of 2‐hydroxyethyl methacrylate as the initiator and tin octanoate as the catalyst. Due to the presence of methacrylic functions at their chain ends, both VP and lactone oligomers participate in radical polymerization reactions and can be therefore classified as radical macromers. Both macromer families have several potential applications, such as use in the synthesis of mixed hydrophilic/hydrophobic hydrogels. All macromers were characterized by NMR spectroscopy and size‐exclusion chromatography (SEC). The polymerization kinetics of the lactone macromers were also analyzed by ¹H NMR spectroscopy.     

Prometabolites of 5‐Diphospho‐myo‐inositol Pentakisphosphate

Diphospho‐myo‐inositol phosphates (PP‐InsP_y) are an important class of cellular messengers. Thus far, no method for the transport of PP‐InsP_y into living cells is available. Owing to their high negative charge density, PP‐InsP_y will not cross the cell membrane. A strategy to circumvent this issue involves the generation of precursors in which the negative charges are masked with biolabile groups. A PP‐InsP_y prometabolite would require twelve to thirteen biolabile groups, which need to be cleaved by cellular enzymes to release the parent molecules. Such densely modified prometabolites of phosphate esters and anhydrides have never been reported to date. This study discloses the synthesis of such agents and an analysis of their metabolism in tissue homogenates by gel electrophoresis. The acetoxybenzyl‐protected system is capable of releasing 5‐PP‐InsP₅ in mammalian cell/tissue homogenates within a few minutes and can be used to release 5‐PP‐InsP₅ inside cells. These molecules will serve as a platform for the development of fundamental tools required to study PP‐InsP_y physiology.     

Radical‐Mediated Three‐Component Coupling of Alkenes

A tandem radical process involving conjugate addition to an activated alkene followed by allylation is reported. B‐Alkylcatecholboranes, easily available via hydroboration of the corresponding alkenes, were used to generate the initial radicals. These radicals add efficiently to electrophilic alkenes such as phenyl vinyl sulfone, N‐phenylmaleimide, and dialkyl fumarate. In the last step of this one‐pot process, the radical adducts react with the allylic sulfones. The whole process can be considered as a unique and selective coupling of three different alkenes.