Synthesis and memory characteristics of highly organo‐soluble hyperbranched polyimides with various electron acceptors

A series of hyperbranched polyimides (HBPIs) were synthesized by reacting a triamine monomer N ,N ′,N ″‐tris(4‐methoxyphenyl)‐N ,N ′,N ″‐tris(4‐phenylamino)?1,3,5‐benzenetriamine with various dianhydrides such as oxydiphthalic dianhydride (ODPA), 3,3′,4,4′‐diphenylsulfonetetracarboxylic dianhydride (DSDA), 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA), and pyromellitic dianhydride (PMDA). The hyperbranched polyimide (6FHBPI) using 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride (6FDA) as dianhydride monomer was also added into the discussion. All the hyperbranched polyimides exhibited excellent organo‐solubility and high thermal stability. Memory devices with a sandwiched structure of indium tin oxide (ITO)/HBPI/Al were constructed by using these HBPIs as the active layers. All these HBPIs based memory devices exhibited favorable memory performances, with switching voltages between ?1.3 V and ?2.5 V, ON/OFF current ratios up to 10⁷ and retention times long to 10⁴ s. Tunable memory characteristics from electrical insulator to volatile memory, and then to nonvolatile memory were obtained by adjusting the electron acceptors of these HBPIs. Molecular simulation results suggested that the electron affinity and the dipole moment of these HBPIs were responsible for the conversion of the memory characteristics. With the electron affinity and dipole moment of these HBPIs increasing, the memory characteristics turned from volatile to nonvolatile. The present study suggested that tunable memory performance could be achieved through adjusting the acceptor moieties of the hyperbranched polyimides. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2281–2288     

Synthesis of novel fluorinated hyperbranched polyimides with excellent optical properties

Novel anhydride‐terminated fluorinated hyperbranched polyimides (FHBPIs) were successfully prepared by condensation of a triamine monomer, 1,3,5‐tris(2‐trifluoromethyl‐4‐aminopheoxy) benzene (TFAPOB), and various aromatic dianhydride monomers with different linear length. UV–vis spectra indicate high optical transparency of FHBPI films with a UV–vis absorption edge of 350–395 nm. FHBPIs show increased mechanical properties with the linear length of dianhydride monomer. Young's moduli of FHBPI range from 2.37 to 2.56 Gpa, similar to those of their linear analogs. These FHBPI films also present a minimum birefringence value as low as 0.0025 at 650 nm and have low optical absorption in the optical communication wavelengths of 1310 and 1550 nm. Rib‐type optical waveguide device fabricated by FHBPI‐4d demonstrated an obvious near‐field mode pattern of the waveguide. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6269–6279, 2009     

Facile synthesis of hyperbranched polyimides from A2 + BB′2 monomers

Facile syntheses of hyperbranched polyimides were realized by the polymerization of A₂ + BB^′₂ monomers, 2,2‐bis(3,4‐dicarboxylphenyl) hexafluoropropane dianhydride (6FDA) + 2,4,6‐triaminopyrimidine (TAP), performed by mixing the monomers together in N‐methylpyrrolidone at 17% w/v concentrations with molar ratios of 6FDA:TAP ranging from 1:1 to 2:1. The lower reactivity of 2‐amino as compared with 4‐/6‐amino in TAP, demonstrated by ¹H NMR, was probably the main reason for no gelation formed during the polymerization although monomer conversions surpassed the theoretical gel points. Fourier transform infrared spectroscopy and NMR were used to verify the structures of the obtained polymers. ¹H NMR analysis indicated the degrees of branching (DB) of the polymers increased from 36 to 83% with the molar ratios of 6FDA:TAP increasing from 1:1 to 2:1. Molecular weights were determined by gel permeation chromatography, and inherent viscosities were measured. Glass‐transition temperature values, determined by differential scanning calorimetry, decreased when DB increased, and thermogravimetric analysis reflected the excellent thermal stability of the obtained hyperbranched polyimides. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4563–4569, 2002     

Nonvolatile resistive memory devices based on ferrocene‐terminated hyperbranched polyimide derived from different dianhydrides

A series of ferrocene‐terminated hyperbranched polyimides (HBPI‐Fcs) were synthesized from a tetra‐amine, bis(4‐(3,5‐bis (4‐amino‐2‐(trifluoromethyl) phenoxy) phenoxy) phenyl) methanon, and various dianhydrides, followed by termination with (4‐amino) phenyl ferrocene. All the HBPI‐Fcs possessed good organo‐solubility and high thermal stability. The devices based on HBPI‐Fcs exhibited bipolar and nonvolatile write‐once‐read‐many times (WORM) memory performance with various threshold voltages and the same ON/OFF current ratio of 10⁴. Moreover, the devices possessed excellent bistability under a constant bias of −1.00 V during a test period of 10⁴ s. The different charge trapping ability of the electron‐accepting moiety endowed the devices with different the threshold voltages. Mechanism analysis showed that the switching behavior was dominated by the charge trapping effect and the charge transfer was well fitted with the space‐current‐limited‐current (SCLC) and ohmic model. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 505–513     

Synthesis of alkaline‐developable,photosensitive hyperbranched polyimides through the reaction of carboxylic acid dianhydrides and trisamines

Hyperbranched polyimides (HBPI)s with high glass‐transition temperatures and excellent thermal stability were synthesized through the reaction of commercially available carboxylic acid dianhydrides with tris[4‐(4‐aminophenoxy)phenyl]ethane (TAPE). In particular, hyperbranched polyimide HBPI(TAPE‐DSDA), prepared through the reaction of TAPE with 3,3′,4,4′‐diphenylsulfonetetracarboxylic dianhydride (DSDA), showed higher thermal stability and good solubility. Furthermore, alkaline‐developable, photosensitive HBPI(TAPE‐DSDA)‐MA‐CA was prepared through the reaction of HBPI(TAPE‐DSDA) with glycidyl methacrylate with tetrabutylammonium bromide as a catalyst in N‐methyl‐2‐pyrrolidinone (NMP) followed by the addition reaction of cis‐1,2,3,6‐tetrahydrophthalic anhydride with triphenylphosphine as a catalyst in NMP. The glass‐transition temperatures of HBPI(TAPE‐DSDA)‐MA‐CA were greater than 300 °C. A resist composed of 74 wt % HBPI(TAPE‐DSDA)‐MA‐CA, 22.2 wt % trimethylpropane triacrylate, and 3.8 wt % Irgacure 907 as a photoinitiator achieved a resolution of a 55‐μm line pattern and a 275‐μm space pattern by UV irradiation (1000 mJ/cm²). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3697–3707, 2004     

Synthesis and characterization of hyperbranched polyimides with good organosolubility and thermal properties based on a new triamine and conventional dianhydrides

A triamine monomer, 1,3,5‐tris(4‐aminophenoxy)benzene (TAPOB), was synthesized from phloroglucinol and 4‐chloronitrobenzene, and it was successfully polymerized into soluble hyperbranched polyimides (HB PIs) with commercially available dianhydrides: 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride (6FDA), 4,4′‐oxydiphthalic anhydride (ODPA), and 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA). Different monomer addition methods and different monomer molar ratios resulted in HB PIs with amino or anhydride end groups. From ¹H NMR spectra, the degrees of branching of the amino‐terminated polymers were estimated to be 0.65, 0.62, and 0.67 for 6FDA–TAPOB, ODPA–TAPOB, and BTDA–TAPOB, respectively. All polymers showed good thermal properties with 10% weight‐loss temperatures (T₁₀'s) above 505 °C and glass‐transition temperatures (T_g's) of 208–282 °C for various dianhydrides. The anhydride‐terminated HB PIs showed lower T₁₀ and T_g values than their amino‐terminated counterparts. The chemical conversion of the terminal amino or anhydride groups of the 6FDA‐based polyimides into an aromatic imido structure improved their thermal stability, decreased their T_g, and improved their solubility. The HB PIs had moderate molecular weights with broad distributions. The 6FDA‐based HB PIs exhibited good solubility even in common low‐boiling‐point solvents such as chloroform, tetrahydrofuran, and acetone. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3804–3814, 2002     

Synthesis and shape memory behavior study of hyperbranched poly(urethane-tetrazole)

A novel hyperbranched poly(urethane-tetrazole)(HPUTZ) was synthesized via the A2+BB2' approach using hexadiisocyanate(HDI) and 3-(bis-(2-hydroxyethyl)) aminopropyltetrazole(HAPTZ).The molecular structure was characterized by FTIR and 1H NMR spectroscopy.The number average molecular weight was measured to be 1.05×104 g/mol with a polydispersity of 1.27 by GPC analysis.The HPUTZ was further cured by the semi-adduct(PEG-IPDI) from polyethylene glycol(PEG) reacting with isophorone diisocyanate(IPDI) to form th...     

Synthesis and thermal behavior of phenylethynyl‐terminated linear and hyperbranched polyphenylquinoxalines

A phenylquinoxaline (PQ) AB monomer mixture was treated with monofunctional and difunctional end‐capping agents and with and without a coupling agent to afford phenylethynyl‐terminated linear PQ oligomers. The resulting PQ oligomers were soluble in common organic solvents and had intrinsic viscosities (IVs) of 0.21–0.30 dL/g. The glass‐transition temperature (T_g) of the diphenylethynyl‐end‐capped PQ oligomer on both sides increased the most, from 215 °C (before curing) to 251 °C (after curing). The PQ AB₂ monomer, which acted as both a coupling agent and a monomer for the hyperbranched polymer, was treated with an AB monomer and end‐capping agents to afford phenylethynyl‐terminated hyperbranched polyphenylquinoxalines (PPQs). They were also soluble in common organic solvents, had IVs of 1.00–1.65 dL/g and T_g's of 251–253 °C, and underwent exothermic cure with maxima around 412–442 °C. The T_g's of the cured hyperbranched PPQs ranged from 258 to 261 °C, depending on the number of phenylethynyl groups on the surface. After further curing, they displayed a T_g of 316 °C in one sample and turned into a fully crosslinked network. The dynamic melt viscosities of a linear oligomer (IV = 0.21 dL/g), a hyperbranched sample (IV = 1.00 dL/g), and a linear reference PPQ (IV = 1.29 dL/g) were compared with respect to the processing temperature. The PQ oligomer and hyperbranched PPQ had low melt viscosities. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6318–6330, 2004     

Bio‐based hyperbranched polyurethane/Fe3O4 nanocomposites as shape memory materials

The bio‐based shape memory polymers have generated immense interest as advanced smart materials. Mesua ferrea L. seed oil‐based hyperbranched polyurethane (HBPU)/Fe₃O₄ nanocomposites were prepared by the in‐situ polymerization technique. The transmission electron microscopy confirmed the homogeneous distribution of the Fe₃O₄ nanoparticles in polymer matrix, whereas Fourier transform infrared spectroscopic study revealed the presence of strong interfacial interactions between them. The incorporation of Fe₃O₄ (0 to 10 wt%) into the HBPU resulted in an increase in tensile strength (5.5–15 MPa) and scratch resistance (3–6 kg). The thermo‐gravimetric analysis indicated the improvement of thermal stability (240–270°C) of the nanocomposites. The nanocomposites exhibited full shape fixity, as well as almost full shape recovery under the microwave stimulus. The shape recovery speed increased with the increase of Fe₃O₄ nanoparticles content in the nanocomposites. Thus, the studied nanocomposites might be used as advanced shape memory materials in different potential fields. Copyright © 2013 John Wiley & Sons, Ltd.     

Shape‐memory effect in hyperbranched poly(ethyleneimine)‐modified epoxy thermosets

A series of shape‐memory epoxy thermosets were synthesized by crosslinking diglycidyl ether of bisphenol A with mixtures of commercially available hyperbranched poly(ethyleneimine) and polyetheramine. Thermal, mechanical and shape‐memory properties were studied and the effect on them of the content and structure of the hyperbranched polymer was discussed. Measurements showed that the glass transition temperature can be tailored from 60 °C to 117 °C depending on the hyperbranched polymer content, and all formulations showed an appropriate glassy/rubbery storage modulus ratio. Shape‐memory programming was carried out at TgE′ given the excellent mechanical properties of the materials, with maximum stress and failure strain up to 15 MPa and 60%, respectively. The resulting shape‐memory behavior was excellent, with maximum shape recovery and shape fixity of 98% as well as a fast shape‐recovery rate of 22%/min. The results show that hyperbranched poly(ethyleneimine) as a crosslinking agent can be used to enhance mechanical and shape‐memory properties with different effects depending on the crosslinking density. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 924–933     

Electrospun hyperbranched polylactic acid–modified cellulose nanocrystals/polylactic acid for shape memory membranes with high mechanical properties

The polylactic acid (PLA) nanofiber membranes reinforced with hyperbranched PLA‐modified cellulose nanocrystals (H‐PLA‐CNCs) were prepared by electrospinning. The H‐PLA‐CNCs and the nanofiber membranes were researched by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). The outcomes embodied that the cellulose nanocrystals (CNCs) could be successfully improved by the hyperbranched PLA, which would offer powerful CNCs/matrix interfacial adhesion. Thus, the mechanical and shape memory properties of PLA can be improved by adding the H‐PLA‐CNCs. In particular, when the addition of H‐PLA‐CNCs was 7 wt%, the tensile strength and an ultimate strain of PLA composite nanofiber membranes was 15.56 MPa and 25%, which was 228% and 72.4% higher than that of neat PLA, respectively. In addition, the shape recovery rate of the PLA/5 wt% H‐PLA‐CNCs composite nanofiber membrane was 93%, which was 37% higher than that of neat PLA. We expected that this present study would provide unremitting efforts for the development of more effective approaches to prepare biology basic shape memory membranes with high mechanical properties.     

Synthesis of polyimides containing triphenylamine‐substituted triazole moieties for polymer memory applications

A series of thermally stable aromatic polyimides containing triphenylamine‐substituted triazole moieties ( AZTA‐PI )s were prepared and characterized. The glass transition temperatures (T_g) of the polyimides were found to be in the range of 262–314 °C. The polyimides obtained by chemical imidization had inherent viscosities of 0.25–0.44 dL g^?1 in N‐methyl‐2‐pyrrolidinone. The number average molecular weights (M_n) and weight average molecular weights (M_w) were 1.9–3.2 × 10⁴ and 3.2–5.6 × 10⁴, respectively, and the polydispersity indices (PDI = M_w/M_n) were in the range of 1.70–1.78. A resistive switching device was constructed from the 4,4′‐hexafluoroisopropylidenediphthalic dianhydride‐based soluble polyimide ( AZTA‐PIa ) in a sandwich structure of indium‐tin oxide/polymer/Al. The as‐fabricated device can be switched from the initial low‐conductivity (OFF) state to the high‐conductivity (ON) state at a switching threshold voltage of 2.5 V under either positive or negative electrical sweep, with an ON/OFF state current ratio in the order of 10⁵ at ?1 V. The device is able to remain in the ON state even after turning off the power or under a reverse bias. The nonvolatile and nonrewritable natures of the ON state indicate that the device is a write‐once read‐many times (WORM) memory. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of soluble branched polyimides derived from an ABB′ monomer

A novel ABB′ monomer, an isomeric mixture of 4‐[4‐(2,4‐diaminophenoxy)phenoxy]phthalic acid 2‐methyl ester, was successfully prepared. The direct polycondensation of the ABB′ monomer was carried out to form polyamic acid monomethyl ester as a precursor with an inherent viscosity of 0.30 dL/g and a number‐average molecular weight of 12,000. The degree of branching of the precursor, determined by ¹H NMR, was 0.07. The low degree of branching was caused by the differences in the reactivities of the amino groups. The shape factor was calculated to be 0.72. End‐modified reactions with acetyl chloride, benzoyl chloride, and phthalic anhydride were carried out. After the chemical imidization of the end‐modified precursors, end‐modified polyimides were successfully prepared. The end‐modified polyimides were soluble in dimethyl sulfoxide, dimethylformamide (DMF), and N‐methyl‐2‐pyrrolidinone. On the basis of thermogravimetry and differential scanning calorimetry measurements of the polyimides, the 5 wt % thermal loss temperatures were determined to be 400–520 °C, and the glass‐transition temperatures were determined to be 200–258 °C. According to the X‐ray diffraction measurements, the end‐modified polyimides were amorphous. A strong but brittle film was prepared from an acetamide end‐modified polyimide solution, via casting from a DMF solution, with a tensile strength of 46 MPa, an elongation at break of 4%, and a modulus of 1.3 GPa. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3200–3211, 2004     

超支化聚酰亚胺的研究进展

近年来,由超支化大分子和线性聚酰亚胺结合而形成了一类新型超支化聚合物--超支化聚酰亚胺(HBPIs),这类聚合物具有独特的理化特性.本文综述了HBPIs最新的研究进展,重点介绍了HBPIs的合成方法,并对其表征及应用进行了描述.     

超支化聚酰亚胺的研究进展

近年来,由超支化大分子和线性聚酰亚胺结合而形成了一类新型超支化聚合物———超支化聚酰亚胺(HBPIs),这类聚合物具有独特的理化特性。本文综述了HBPIs最新的研究进展,重点介绍了HBPIs的合成方法,并对其表征及应用进行了描述。     

Synthesis and properties of hyperbranched polyimides derived from novel triamine with prolonged chain segments

Novel pyridine‐containing hyperbranched polyimides (HBPIs) were synthesized by using a new triamine 2,4,6‐tris[3‐(4‐aminophenoxy)phenyl]pyridine with prolonged chain segments, ether linkage and meta‐linked units as a BB′₂‐like monomer, various commercial aromatic dianhydrides as A₂ monomers. Most of the obtained HBPIs were readily soluble in common organic solvents such as N,N‐dimethylformamide, N,N‐dimethylacetamide, N‐methyl‐2‐pyrrolidone, m‐Cresol, and so forth. Meanwhile, they also had good thermal stability with the glass transition temperatures (T_gs) all above 210 °C, the temperature at 10% weight loss of 537.1–574.4 °C in nitrogen atmosphere. Strong and flexible HBPI films were obtained, which had good mechanical properties with tensile strengths of 83.3–95.8 MPa, tensile modulus of 1.82–2.43 GPa and elongations at break of 4.84–6.98%. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2425–2437     

Synthesis and gas transport properties of ODPA-TAP-ODA hyperbranched polyimides with various comonomer ratios

A series of hyperbranched copolyimides (HBPI)s based on commercially available monomers 4,4′-oxydiphthalic anhydride (ODPA), 2,4,6-triaminopyrimidine (TAP) and 4,4′-oxydianiline (ODA) were prepared. The synthesis involved the formation of hyperbranched polyamic acid (PAA) precursors in the first step and the thermal imidization of cast thin PAA films in the second step. Two basic types of HBPIs were prepared by controlling the molar ratio of ODPA and an amine mixture of TAP and ODA. When the molar ratio was 1:1, the amine-terminated HBPIs were obtained; with the molar ratio of 2:1 anhydride-terminated HBPIs were prepared. Degree of branching was estimated by ¹H and ¹³C NMR analysis. It was found that approximately 48% of TAP units presented in ODPA:TAP:ODA = 1:0.75:0.25 HBPI macromolecules create the branching unit. Amine-terminated HBPIs showed moderate weight-average molecular weights and these values rather higher than for the anhydride-terminated HBPIs. With increasing ODA comonomer content in amine-terminated HBPIs increased their molecular weight and thermal and mechanical stability, whereas in anhydride-terminated HBPIs these trends were opposite. Amine-terminated HBPIs generally exhibited higher thermal stability than the anhydride-terminated ones. Gas permeability coefficients of both HBPIs types increased with increasing content of ODA comonomer. Prepared membranes exhibited high separation performance and have a potential to be utilized in industrial gas separation applications.     

Recovery stress and work output in hyperbranched poly(ethyleneimine)‐modified shape‐memory epoxy polymers

In this study a series of hyperbranched modified shape‐memory polymers were subjected to constrained shape recoveries in order to determine their potential use as thermomechanical actuators. Materials were synthesized from a diglycidyl ether of bisphenol A as base epoxy and a polyetheramine and a commercial hyperbranched poly(ethyleneimine) as crosslinker agents. Hyperbranched polymers within the structure of the shape‐memory epoxy polymers led to a more heterogeneous network that can substantially modify mechanical properties. Thermomechanical and mechanical properties were analyzed and discussed in terms of the content of hyperbranched polymer. Shape‐memory effect was analyzed under fully and partially constrained conditions. When shape recovery was carried out with fixed strain a recovery stress was obtained whereas when it was carried out with a constraining stress the material performs mechanical work. Tensile tests at Tg^E′ showed excellent values of stress and strain at break (up to 15 MPa and almost 60%, respectively). Constrained recovery performances revealed rapid recovery stress generation and unusually high recovery stresses (up to 7 MPa) and extremely high work densities (up to 750 kJ/m³). The network structure of shape‐memory polymers was found to be a key factor for actuator‐like applications. Results confirm that hyperbranched modified‐epoxy shape memory polymers are good candidates for actuator‐like shape‐memory applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1002–1013     

Shape memory induced structural evolution of high performance copolyimides

In this work, two kinds of high temperature shape memory copolyimides were prepared and the shape memory cycles induced structural evolution of macromolecular chains was investigated in detail. The glass transition temperature (T_g) of poly(benzoxazole‐co‐imide) (PI1) and poly(benzimidazole‐co‐imide) (PI2) are 280 °C and 355 °C, respectively. The results show that PI1 could keep stable macromolecular chain structure under shape memory cycles and exhibit outstanding shape memory performance (R_f > 98%, R_r > 97%) under different stretch condition. Whereas, shape memory cycles induced orientation with more ordered macromolecular chains packing is formed for PI2 after several thermal mechanical cycles, which strongly affect physical crosslinking points, thermal mechanical properties as well as shape memory behaviors. The study on macroscopic property and microscopic structure evolution will promote a better understanding of the shape memory effect of polyimides and accelerate development of high performance polyimides for shape memory applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3858–3867     

Synthesis and characterization of negative‐type photosensitive hyperbranched polyimides with excellent organosolubility from an A2 + B3 monomer system

A series of photosensitive hyperbranched polyimides (HB‐PIs) were prepared through facile end‐group modifications of the fully imidized polymer. A triamine, 1,3,5‐tris(4‐aminophenoxy)benzene, and a dianhydride, 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, were condensed with a dropwise addition method in a molar ratio of 1/2 to afford an anhydride‐terminated poly(amic acid) precursor, which was then end‐capped by 4‐aminophenol and chemically imidized to yield a phenol‐terminated HB‐PI. The modifications of the terminal phenol groups of the polyimide by acyl chloride compounds (acryloyl chloride, methylacryloyl chloride, and cinnamoyl chloride) gave the target polymers. The photosensitive HB‐PIs showed good thermal properties and excellent solubility even in low‐boiling‐point solvents at room temperature, such as acetone, 1,1,2‐trichloroethane, tetrahydrofuran, and chloroform. Photosensitive property studies revealed good photolithographic properties with a resolution greater than 3 μm and a sensitivity of 650–680 mJ/cm². © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1735–1744, 2004