Studies on thermotropic liquid crystalline polyurethanes. III. Synthesis and properties of polyurethane elastomers by using various mesogenic units as chain extender

Four series of thermotropic polyurethane elastomers (TPUEs) were synthesized in this study. The hard segments were formed by using 4,4′-methylenedicyclohexyl diisocyanate (H₁₂MDI) reacted with various mesogenic units, such as benzene-1,4-di(4-iminophenoxy-n-hexanol), benzene-1,4-di(4-iminophenol), and 3,3′-(4,4′-biphenylene)dipropanol, which also acted as the chain extender. Poly(oxytetramethylene)glycols (PTMEGs), PTMEG-2000 (M_n 2,000) and PTMEG-1000 (M_n 1,000) were used as a soft segment. The structures of all synthesized thermotropic liquid crystalline polyurethanes (TLCPUs) were characterized by FTIR spectroscopy. The effects of mesogenic units on the LC properties and elastic behaviors of LCPUs were studied. It was difficult to show LC behaviors for the PU elastomers derived from the mesogenic units with a lower aspect ratio, such as 3,3′-(4,4′-biphenylene)dipropanol, or the long soft segments, PTMEG-2000. In addition, these PU elastomers show better elastic properties by using a higher aspect ratio mesogenic unit as the chain extender, such as benzene-1,4-di(4-iminophenoxy-n-hexanol and benzene-1,4-di(4-imino-phenol)). The thermal properties were investigated by DSC measurements, thermal optical polarized microscopy, wide angle X-ray diffraction, dynamic mechanical analysis, and thermogravimetric analysis. The mechanical properties were measured by a tensilemeter. © 1996 John Wiley & Sons, Inc.     

Liquid crystalline properties of unsegmented and segmented polyurethanes synthesised from high aspect ratio mesogenic diols

A series of novel tetrad high aspect ratio mesogenic diol monomers 4-{[4-(n-hydroxyalkoxy)-phenylimino]-methyl}-benzoic acid 4-{[4-(n-hydroxyalkoxy)-phenylimino]-methyl}-phenyl ester were prepared with varying alkoxy spacer length (n=2,4,6,8,10) by reacting 4-formylbenzoic acid 4-formylphenyl ester and 4-(n-hydroxyalkoxy) anilines. Two series of thermotropic main chain liquid crystalline unsegmented polyurethanes (PUs) were obtained by the polyaddition of the mesogenic diols with hexamethylene diisocyanate (HMDI) and methylene bis(cyclohexylisocyanate) (H₁₂MDI) in dimethylformamide respectively. The effect of the incorporation of a third component namely polyol on the liquid crystalline properties of the polyurethanes was also studied. Linear segmented PUs were synthesised by a two-step block copolymerisation method. The PUs synthesised were based on six spacer mesogenic diol chain extender, soft segments poly(tetramethylene oxide)glycol (PTMG) (M_n= 650,1000,2000) and polycaprolactone diol (PCL) (M_n=530,1250,2000) of varying molecular weights and different diisocyanates including HMDI, H₁₂MDI and methylene bis(phenylene isocyanate) (MDI). Structural elucidation was carried out by elemental analysis, fourier transform infra red (FT-IR), nuclear magnetic resonance (¹H NMR and ¹³C NMR) spectroscopy. Inherent viscosity of the unsegmented polymers measured in methanesulphonic acid at 26°C was in the range of 0.13 - 0.65 dL/g while the molecular weights and molecular weight distribution of the segmented polyruethanes was determined using gel permeation chromatography (GPC). Mesomorphic properties were studied by differential scanning calorimetry (DSC) and hot stage polarising optical microscopy and the thermal stability was determined by thermogravimetric(TG)analysis. The monomeric diols and the polyurethanes exhibited nematic texture and good mesophase stability. It was observed that the partial replacement of the mesogenic diol by the polyol of varying molecular weights influenced the phase transitions and the occurrence of mesophase textures. The phase transition temperatures of the investigated polyurethanes showed dependence on the chain length of the soft segment and on the content of the mesogen moiety. A higher content of mesogenic moiety was needed to obtain liquid crystalline property when the soft segment length was increased as observed in the case of PTMG. Grained and threaded textures were observed depending on the molecular weight of the soft segment, the mesogen content and the diisocyanate. The stress-strain analyses showed that the polymers bused on high molecular weight PTMG soft segment have elastomeric property while the PCL based PUs displayed no elastomeric property.     

Crystallization studies on linear aliphatic n‐polyurethanes

A detailed crystallization study of the linear n‐polyurethane (n‐PUR) family for n ranging from 5 to 12 was carried out by DSC supported by polarizing optical microscopy. The study embraces crystallization of all the n‐PUR under both nonisothermal and isothermal conditions. The odd and even series of n‐PUR defined by the parity of the number of methylenes (n) contained in the polymer repeating unit are considered and separately analyzed. All the members of the two series showed a thermal behavior consistent with their chemical constitution. Isothermal crystallization data were analyzed by the kinetics Avrami approach which revealed that the “crystallizability” of n‐PUR increases steadily with the flexibility of the polyurethane chain. Melting and enthalpy temperatures of isothermally and nonisothermally crystallized n‐PUR were found to vary with n according to a zig‐zag plot characteristic of odd–even effect. Given the structural similitude of n‐PUR with (n + 2)‐nylons, results were referenced to those reported for this family of polyamides. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1368–1380, 2009     

Microstructure and properties of polyurethanes derived from castor oil

The goal of this work was the synthesis of novel segmented polyurethanes with a high percentage of components derived from renewable sources. The soft segment was a polyol derived from castor oil and the hard segment structure was varied by means of different chain extenders, petrochemical-based 1,4-butanediol (BD) and corn sugar-based 1,3-propanediol (PD). The synthesis was carried out in bulk and without catalyst via a two-step polymerization varying hard segment ratio. Physico-chemical, mechanical and morphological characterization was performed by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), atomic force microscopy (AFM), mechanical testing and termogravimetric analysis (TGA). Properties have been discussed from the viewpoint of hard/soft microdomain phase separation and also the hard segment nature and formed structure. An increase in hard segment content was accompanied by an increase in hard domain order, crystallinity, and stiffness. The hard segment structures, in addition to the elastic nature of soft segment, provide enough physical crosslink sites to impart properties ranging from elastomeric to rigid behaviour with the increase of hard segment content. Polyurethanes synthesized from bio-based chain extender showed a slightly lower crystallinity in the hard segment structure than that synthesized from BD as the chain extender. This lower crystallinity avoids strength concentrations at the soft/crystalline hard segment interface, thus improving the mechanical properties at high hard segment content. The slightly higher thermal stability observed for BD based polyurethanes is related with their more packed structures and crystallinity observed in the hard segment structure.     

Novel Polyurethane Gels: The Effect of Structure on Gelation

Novel polyurethane gels have been reported in common solvent like dimethyl formamide (DMF). Polyurethanes have been synthesized from diisocyanates, diols and rigid chain extenders. We have illustrated the influence of chemical structure of the chain extenders on gelation rate, thermal property and morphology of the gels in DMF. Gelation rate increases significantly with the rigidity of the chain extender. Introduction of more rigid chain extender molecules in polyurethane prepolymer enhanced the thermal stability of the pure polymer. On the contrary, the solvent retention power of the gels gradually decreases with increasing rigidity of chain extender presumably because of the poor dispersion/greater aggregation of the hard segments in the soft segment matrix. Morphology and formation of gelation have been discussed.     

Theoretical modeling of the relationship between Young's modulus and formulation variables for segmented polyurethanes

We describe a new modeling approach to prediction of Young's modulus of segmented polyurethanes. This approach combines micromechanical models with thermodynamic considerations based on the theory of block copolymers. The resulting model predicts both the equilibrium morphology and the “ideal” Young's modulus of a segmented polyurethane polymer as a function of its formulation (hard segment chemical structure, hard segment weight fraction, soft segment equivalent weight) and temperature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2123–2135, 2007     

新型二胺扩链剂对合成聚脲机械性能的影响

以咔唑为原料合成了新型扩链剂N-乙基-3,6-二氨基咔唑;将其与端氨基聚醚和甲苯-2,4-二异氰酸酯(TDI)经溶液聚合合成了新型聚脲;采用红外光谱表征了新型扩链剂和聚脲的结构.结果表明,以N-乙基-3,6-二氨基咔唑作为扩链剂合成聚脲时,随异氰酸酯质量分数的增加,凝胶时间逐渐变短;所制备的聚脲的拉伸强度达25MPa,断裂伸长率降低为105%.     

Critical review of the molecular topology of semicrystalline polymers: The origin and assessment of intercrystalline tie molecules and chain entanglements

Intercrystalline molecular connections in semicrystalline polymers have been the subject of numerous discussions and controversies. Nevertheless, there is one point of agreement: such intercrystalline tie molecules have a prime role in the mechanical and use properties of the materials, notably the resistance to slow crack growth. This article is a critical review of the mechanisms of generation of the tie molecules during the stage of crystallization and of the experimental and theoretical assessment of their concentration. Polyethylene and related materials are mainly studied. The contribution of chain entanglements is also discussed in parallel with tie molecules. Particular attention is paid to Huang and Brown's statistical approach, which appears to be the most appropriate one for predictive purposes and has aroused much interest from various authors. Attempts are made to provide solutions to the shortcomings of this model. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1729–1748, 2005     

Synthesis and characterization of bismaleimides derived from polyurethanes

A series of novel bismaleimides (BMIs) were prepared from maleic anhydride and polyurethane prepolymers based on MDI (4,4′-diphenylmethane diisocyanate) and polyether and polyester diols with various chain lengths. All the BMIs were characterized by IR, ¹H-NMR, and elemental analysis. DSC studies indicated that the thermal polymerization of the BMIs could be carried out in the temperature range of 102–245°C, and that curing behavior was significantly affected by the molecular weight of the BMIs. The crosslinked BMI elastomers showed good mechanical properties and much better thermal stability than that of the traditional polyurethane elastomers. The glass transition temperatures, mechanical, and dynamic mechanical properties were dependent on the types of polyols used and the resultant crosslink densities due to various chain lengths of the BMIs. © 1994 John Wiley & Sons, Inc.     

Properties of Polyurethanes Based on Mesogenic Diol and 4,4'-methylenebis(cyclohexyl Isocyanate)

New polyurethanes with mesogenic units in the main chain due to the use of a liquid crystalline chain extender were synthesized from 4,4'-methylenebis(cyclohexyl isocyanate) (HMDI)using diisocyanates of different trans, trans isomer content, a low molecular diol4,4'-bis(6-hydroxyhexoxy)biphenyl (BHHBP) and a high molecular poly(hexyleneadipate)diol (PHA). The growth of trans, trans isomer content in HMDI used to syntheses of PU induces monotonic growth of melting point, rectilinear growth of crystallization temperatures and the growth of crystallization enthalpy, both for hard segment polyurethanes and block polyurethanes. The increase of trans, trans isomer content in HMDI increases also glass transition temperatures and dynamic storage modulus of the polyurethanes. This revised version was published online in August 2006 with corrections to the Cover Date.     

Synthesis and properties of segmented main‐chain liquid‐crystalline polyurethanes with a high aspect ratio mesogenic diol as a chain extender

Main‐chain liquid‐crystalline polyurethanes were synthesized based on a high aspect ratio mesogenic diol (4‐{[4‐(6‐hydroxyhexyloxy)‐phenylimino]‐methyl}‐benzoic acid 4‐{[4‐(6‐hydroxyhexyloxy)‐phenylimino]‐methyl}‐phenyl ester) as a chain extender; polycaprolactone (PCL) diol soft segments of different number‐average molecular weights (530, 1250, or 2000); and different diisocyanates, including 1,4‐hexamethylene diisocyanate (HMDI), 4,4′‐methylene bis(cyclohexyl isocyanate) (H₁₂MDI), and 4,4′‐methylene bis(phenyl isocyanate) (MDI). The structure of the polymers was confirmed with Fourier transform infrared spectroscopy, and differential scanning calorimetry and polarizing microscopy measurements were carried out to examine the liquid‐crystalline and thermal properties of the polyurethanes, respectively. The mesogenic diol was partially replaced with 20–50 mol % PCL. A 20 mol % mesogen content was sufficient to impart a liquid crystalline property to all the polymers. The partial replacement of the mesogenic diol with PCL of various molecular weights, as well as the various diisocyanates, influenced the phase transitions and the occurrence of mesophase textures. Characteristic liquid‐crystalline textures were observed when a sufficient content of the mesogenic diol was present. Depending on the flexible spacer length and the mesogenic content, grained and threadlike textures were obtained for the HMDI and H₁₂MDI series polymers, whereas the polyurethanes prepared from MDI showed only grained textures for all the compositions. The polymers formed brittle films and could not be subjected to tensile tests. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1527–1538, 2002     

Studies on thermoplastic polyurethanes based on new diphenylethane-derivative diols. II. Synthesis and characterization of segmented polyurethanes from HDI and MDI

Various new thermoplastic segmented polyurethanes were synthesized by a one-step melt polymerization from aliphatic-aromatic α,ω-diols containing sulfur in the aliphatic chain, including 4,4′-(ethane-1,2-diyl)bis(benzenethioethanol), 4,4′-(ethane-1,2-diyl)bis(benzenethiopropanol) and 4,4′-(ethane-1,2-diyl)bis(benzenethiodecanol) as chain extenders, hexane-1,6-diyl diisocyanate (HDI) or 4,4′-diphenylmethane diisocyanate (MDI) and 20-80 mol% poly(oxytetramethylene)diol (PTMO) with molecular weight of 1000 g/mol as a soft segment. The reaction was conducted at the molar ratio of NCO/OH = 1 and 1.05, and in the case of the HDI-based polyurethanes in the presence of dibutyltin dilaurate as a catalyst. The effect of the diisocyanate used on the structure and some physicochemical, thermal and mechanical properties of the segmented polyurethanes were studied. The structures of these polyurethanes were examined by FTIR and X-ray diffraction analysis. The thermal properties were investigated by differential scanning calorimetry and thermogravimetric analysis. Shore hardness and tensile properties were also determined. All the synthesized polymers showed partially crystalline structures. The MDI-based polyurethanes were products with lower crystallinity, higher glass-transition temperature (T_g) and better thermal stability in comparison with the HDI-based ones. The MDI series polymers also exhibited higher tensile strength (up to ∼36 MPa vs. ∼23 MPa) and elongation at break (up to ∼3900% vs. ∼900%), but lower hardness than the analogous HDI series polyurethanes. In both series of the polymers an increase in PTMO soft-segment content was associated with decreased crystallinity, T_g, hardness and tensile strength. An increase in PTMO content also involved an increase in elongation at break.     

Amphiphilic segmented polyurethanes as surface modifying additives

Amphiphilic segmented polyetherurethanes were prepared from methylene diphenylene diisocyanate (MDI), poly(ethylene glycol) 1500 (PEG), and a fatty acid monoglyceride as a chain extender. The polymers were not soluble in water or methanol, but dissolved readily in organic solvents. The amphiphilic properties were demonstrated as a large hysteresis in the water contact angles, exceeding 110°. The amphiphilic polymers were shown to modify the surface properties of a poly(ether urethane) (PEU) and a poly(ether urethane urea) (PEUU) when added in 1–10 wt %, presumably due to migration of the additive to the surface. The surfaces of particularly the PEU blends became highly amphiphilic, exhibiting contact angles hystereses up to 90–100°. A surface saturation effect was observed at 5% added amphiphilic polymer. A difference in the behavior of PEU and PEUU was ascribed to differences in solubility of the additive in the matrix. On long-term exposure to water the PEUU blends increased their amphiphilic behavior.     

丁羟胶型聚氨酯弹性体的水解稳定性

丁羟胶型聚氨酯弹性体的水解稳定性;弹性体;扩链剂     

New insights into the multiple melting behaviors of the semicrystalline ethylene‐hexene copolymer: Origins of quintuple melting peaks

A semicrystalline ethylene‐hexene copolymer (PEH) was subjected to a simple thermal treatment procedure as follows: the sample was isothermally crystallized at a certain isothermal crystallization temperature from melt, and then was quenched in liquid nitrogen. Quintuple melting peaks could be observed in heating scan of the sample by using differential scanning calorimeter (DSC). Particularly, an intriguing endothermic peak (termed as Peak 0) was found to locate at about 45 °C. The multiple melting behaviors for this semicrystalline ethylene‐hexene copolymer were investigated in details by using DSC. Wide‐angle X‐ray diffraction (WAXD) technique was applied to examine the crystal forms to provide complementary information for interpreting the multiple melting behaviors. Convincing results indicated that Peak 0 was due to the melting of crystals formed at room temperature from the much highly branched ethylene sequences. Direct heating scans from isothermal crystallization temperature (T_c, 104–118 °C) were examined for comparison, which indicated that the multiple melting behaviors depended on isothermal crystallization temperature and time. A triple melting behavior could be observed after a relatively short isothermal crystallization time at a low T_c (104–112 °C), which could be attributed to a combination of melting of two coexistent lamellar stack populations with different lamellar thicknesses and the melting‐recrystallization‐remelting (mrr) event. A dual melting behavior could be observed for isothermal crystallization with both a long enough time at a low T_c and a short or long time at an intermediate T_c (114 °C), which was ascribed to two different crystal populations. At a high T_c (116–118 °C), crystallizable ethylene sequences were so few that only one single broad melting peak could be observed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2100–2115, 2008     

Mechanical property tuning of semicrystalline network polymers by controlling rates of crystallization and crosslinking

Semicrystalline network polymers were obtained by the Diels–Alder (DA) reaction of furyl‐telechelic poly(ε‐caprolactone) and tris(2‐maleimide ethyl)amine. Controlling the rates of crystallization and crosslinking reaction gave materials with various properties. Curing at a temperature much below T_m of poly(ε‐caprolactone), at which crystallization proceeded first followed by DA reaction, gave a hard and stiff material, whereas curing above T_m gave a soft and stretchable one. When crystallization and crosslinking were promoted simultaneously, tough and ductile materials were obtained. Structural analysis of the network polymers showed that the variation in the properties was derived from the difference in the crystallinity, crystallite size, and network structure. Therefore, materials with various mechanical properties, from soft to hard, could be obtained by simple thermal treatment. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Investigation of covalently colored polyurethane latexes based on novel anthraquinone polyurethane chain extenders

Novel red and yellow polyurethane (PU) chain extenders with one anthraquinone chromophore and two hydroxyls were synthesized, and then used to fabricate covalently colored PU latexes with pendent chromophores on the PU backbone. The chemical structures of the chain extenders were characterized by ¹H-NMR and FTIR, and the properties of PU latexes and their films were investigated by UV-Vis absorption spectra, particle size analysis, FTIR, Soxhlet's extraction and xenon arc aging testing. Results showed that the covalently colored PUs had the same UV-Vis absorption behavior as the corresponding chain extenders, and amount of the chain extenders had no obvious influence on the latex preparation process and the resulted latex colloidal properties. Compared with the corresponding non-covalently colored PU latex films, both the light fastness and the solvent fastness of the covalently colored PU latex films were significantly enhanced by the covalent incorporation of chromophores with PU matrix.     

Effect of short glass fiber on structure and viscoelastic behavior of olefinic polymers synthesized with metallocene catalyst

Several composites were prepared on the basis of an ethylene homopolymer and different copolymers of ethylene and 1‐hexene, synthesized with a metallocene catalyst, as matrices and a content of a 5 wt % of short glass fiber. The effect of the fiber incorporation on the structure and mechanical and viscoelastic behaviors was analyzed for the different samples. The glass fibers induced a slightly higher crystallinity, and the crystallite morphology significantly changed (long spacings and crystal orientation). The incorporation of fibers did not reinforce the different matrices under study at this low content; consequently, the mechanical parameters, such as Young's modulus, yielding stress, and microhardness, were lower in the composites as compared with those values found in the neat polyolefins. The location and apparent activation energies of distinct relaxation processes are also discussed. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1244–1255, 2003     

Processing-structure-mechanical property relationships of semicrystalline polyolefin-based block copolymers

The incremental plastic deformation of the crystals of block copolymers made of semicrystalline polypropylene endblocks and amorphous ethylene-r-propylene midblocks occurring during step cycle tensile tests has dramatic effects on the stress-strain curves. This can be understood from the evolution of the morphology and of the microstructure of the crystalline blocks revealed by X-ray scattering experiments. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1428–1437, 2010