Synthesis and tunable properties of oligoaniline‐functionalized polyamides

Electroactive polyamides containing dense oligoaniline functionalizations (PAs) were synthesized via oxidative coupling polymerization followed by postpolymerization functionalization, and exhibit excellent solubility, good thermal stability and reversible electroactivity. Interesting spectroscopic changes that occurred through chemical oxidation have been shown, which demonstrate the potential of PAs as an electrochromic material. As a result, the electrochromic behaviors of PAs were investigated in detail, exhibiting high contrast value, moderate switching time, and satisfactory coloration efficiency. Tunable conductive and dielectric properties have also been accomplished by varying the incorporation of oligoaniline segments. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3343–3349     

Novel electroactive poly(arylene ether sulfone) copolymers containing pendant oligoaniline groups: Synthesis and properties

We present a series of novel poly(arylene ether sulfone) copolymers containing pendant oligoaniline groups. A novel monomer containing oligoaniline, 2,6‐difluorobenzoyl aniline tetramer (DFAT), was synthesized by reaction of 2,6‐difluorobenzoyl chloride and parent aniline tetramer and incorporated into the aforementioned copolymers via direct copolymerization with 4,4′‐dichlorodiphenyl sulfone (DCDPS), and 4,4′‐isopropylidene diphenol (BPA) using N,N′‐dimethylacetamide as solvent. The structures of these copolymers were confirmed by FTIR, ¹H NMR, and GPC. Spectral analysis of the copolymers in different oxidation states was investigated via UV‐visible spectra. The copolymers exhibited outstanding thermal stability and good solubility in various organic solvents. Their electroactivity, explored with cyclic voltammetry, was found to increase as the content of oligoaniline in the polymer increased. The electric and dielectric properties of the copolymers were also studied in detail. The electrochromic performance of the copolymers was investigated by electrochromic photographs and transmittance spectra; the color of the copolymer thin films changes from grey (at 0.0 V), to green (at 0.4 V), to blue (at 0.6 V) and to pearl blue (at 1.0 V) and the maximum transmittance change (ΔT) at 700 nm is 42.6% (90.7% ? 48.1%). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A single‐layer approach to electrochromic materials

This study is focused on the development of electrochromic (EC) materials that could be incorporated into electrically‐driven switchable devices such as electrochromogenic glasses. The ultimate goal of this research is to depart from the complexity of the EC device construction which is in use today. Such construction consists of three layers each of them incorporating a specific functionality: the electrochromophore, the electrolyte and the ion storage, assembled between two transparent or reflective electrodes. In most of these conventional devices the electrolyte layer is a liquid or a gel. Since solid‐state EC devices are of high commercial interest, we are exploring various avenues to reduce the number of layers to one layer that is all‐solid and electrochromically/electrolytically and ionically functional. The design strategy is based on the use of polymers such as poly(epichlorohydrin‐co‐ethylene oxide), poly(vinyl butyral) and poly(ethylene‐co‐methacrylic acid) ionomer, to which EC properties were introduced by grafting reactions with specifically synthesized carbazole derivatives. A combination of analytical techniques was used to characterize the monomers and the carbazole‐grafted polymers. A proof of concept was demonstrated for a single‐layer, all‐solid‐state EC device consisting of a film of poly(ECH‐co‐EO) containing pendent carbazole groups, assembled between two transparent electrodes, Sn‐doped In₂O₃ oxide‐coated glasses. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A novel high‐contrast ratio electrochromic material from spiro[cyclododecane‐1,9′‐fluorene]bicarbazole

A novel electroactive spirocyclododecylfluorene monomer named 2,7‐bis(carbazol‐9‐yl)‐9,9′‐spiro[cyclododecane‐1,9′‐fluorene] (SFC) was synthesized and electrochemically polymerized to give a very stable multi‐electrochromic polymer (poly‐SFC). Two separate oxidation processes were observed for both SFC monomer and poly‐SFC that carries two carbazole units. The polymeric film of poly‐SFC was coated onto ITO/glass surface, and it shows different colors (transparent, yellowish green, green, and dark green) upon stepwise oxidations. An electrochromic device based on poly‐SFC was assembled in the sandwich cell configuration of ITO/poly‐SFC//gel electrolyte//PEDOT/ITO. Poly‐SFC exhibits 90% of transparency at neutral state and a high contrast ratio (ΔT = 58% at 800 nm). This device constructed from it represents a response time of about 1 s, high coloration efficiency (1377 cm² C^–1) and retained its performance by 96.4% even after 1000 cycles. Exhibiting high transparency at neutral state, reversible redox behavior, resistance to overoxidation, and especially high contrast ratio at near IR region can make poly‐SFC be useful and promising candidate for electrochromic applications despite having a relatively slow response time. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Syntheses of pyrimidine‐based polymers containing electron‐withdrawing substituent with high open circuit voltage and applications for polymer solar cells

Polymers using new electron‐deficient units, 2‐pyriminecarbonitrile and 2‐fluoropyrimidine, were synthesized and utilized for the photovoltaics. Donor‐acceptor (D‐A) types of conjugated polymers ( PBDTCN, PBDTTCN, PBDTF, and PBDTTF ) containing 4,8‐bis(2‐octyldodecyloxy)benzo[1,2‐b;3,4‐b′]dithiophene (BDT) or 4,8‐bis(5‐(2‐octyldodecyloxy)thiophen‐2‐yl)benzo[1,2‐b:4,5‐b′]dithiophene (BDTT) as electron rich unit and 2‐pyriminecarbonitrile or 2‐fluoropyrimidine as electron deficient unit were synthesized. We designed pyrimidine derivatives in which strong electron‐withdrawing group (C?N or fluorine) was introduced to the C2 position for the generation of strong electron‐deficient property. By the combination with the electron‐rich unit, the pyrimidines will provide low band gap polymers with low highest occupied molecular orbital (HOMO) energy levels for higher open‐circuit voltages (V_OC). For the syntheses of the polymers, the electron‐rich and the electron‐deficient units were combined by Stille coupling reaction with Pd(0)‐catalyst. Absorption spectra of the thin films of PBDTTCN and PBDTTF with BDTT unit show shift to a longer wavelength region than PBDTCN and PBDTF with BDT unit. Four synthesized polymers provided low electrochemical bandgaps of 1.56 to 1.96 eV and deep HOMO energy levels between ?5.67 and ?5.14 eV. © 2015 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 771–784     

Proton conducting polymers containing 1H‐1,2,3‐triazole moieties

Polyacrylates containing a different number of 1H‐1,2,3‐triazole groups per repeat unit have been synthesized via conventional free radical polymerization. These polymers were characterized by nuclear magnetic resonance spectroscopy (NMR), gel permeation chromatography (GPC), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). Proton conductivity measurements were made using impedance spectroscopy. Introduction of more than one triazole per repeat unit did not result in an increase in conductivity as there was an accompanying increase in glass transition temperature (T_g). A maximum conductivity of 17.5 μS/cm was obtained at 200 °C under anhydrous condition. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 188–196, 2009     

Synthesis of a new class of triphenylamine‐containing poly(ether‐imide)s for electrochromic applications

A novel triphenylamine (TPA)‐containing bis(ether anhydride) monomer, namely 4,4′‐bis(3,4‐dicarboxyphenoxy)triphenylamine dianhydride, was synthesized and reacted with various aromatic diamines leading to a series of new poly(ether‐imide)s (PEI). Most of these PEIs were soluble in organic solvents and could be easily solution cast into flexible and strong films. The polymer films exhibited good thermal stability with glass‐transition temperatures in the range 211–299 °C. The polymer films exhibited reversible electrochemical processes and stable color changes (from transparent to navy blue) with high coloration efficiency and contrast ratio upon electro‐oxidation. During the electrochemical oxidation process, a crosslinked polymer structure was developed due to the coupling reaction between the TPA radical cation moieties in the polymer chains. These polymers can be used to fabricate electrochromic devices with high coloration efficiency, high redox stability, and fast response time. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 825–838     

Poly(methyl methacrylate) copolymers containing multiple,pendent plasticizing groups

New ether dimer (ED‐Eh) and diester (EHDE) derivatives of α‐(hydroxymethyl)acrylate, each having two 2‐ethylhexyl side chains, and an amine‐linked di(2‐ethylhexyl)acrylate (AL‐Eh), having three 2‐ethylhexyl side chains, were synthesized and (co)polymerized to evaluate the effects of differences in the structures of the monomers on final (co)polymer properties, particularly glass transition temperature, T_g. The free radical polymerizations of these monomers yielded high‐molecular–weight polymers. Cyclopolymer formation of ED‐Eh and AL‐Eh was confirmed by ¹³C NMR analysis and the cyclization efficiencies were found to be very high (～100%). Copolymers of ED‐Eh, EHDE, and AL‐Eh with methyl methacrylate (MMA) showed significant T_g decreases over poly(methyl methacrylate) (PMMA) due to 2‐ethylhexyl side groups causing “internal” plasticization. Comparison of the T_g's of the copolymers of 2‐ethylhexyl methacrylate, ED‐Eh, EHDE, and AL‐Eh with MMA revealed that the impacts of these monomers on depression of T_g's are identical with respect to the total concentration of the pendent groups. This is consistent with an earlier study involving copolymers of monomers comprising one and two octadecyl side groups with MMA. That is, the magnitude of decrease in T_g's was quantitatively related to the number of the 2‐ethylhexyl pendent groups in the copolymers rather than their placement on the same or randomly incorporated repeat units. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2302–2310, 2010     

High fluorescent ethyl acrylate modified PEDOT‐MeNH2 with enhanced electrochromic performance

Two poly(2'‐aminomethyl‐3,4‐ethylenedioxythienylene) (PEDOT‐MeNH₂) derivatives were successfully synthesized by electrochemical polymerization of precursors, diethyl 3'‐(((2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl) methyl)azanediyl)dipropanoate ( monomer 1 ) and ethyl 3‐(((2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl) methyl)amino)propanoate ( monomer 2 ), respectively. Structure–property relationships of monomers and polymers, including electrochemical, optical properties, and morphology, were systematically explored. Significantly, the designed polymers exhibited red and orange emission signatures with high fluorescence quantum yields (Φ_F) of 0.044 and 0.045 compared with those of monomers; they may be used as building blocks for rational design of fluorescent materials. Moreover, cyclic voltammetry and spectroelectrochemistry studies demonstrated that poly(diethyl 3'‐(((2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl)methyl)azanediyl) dipropanoate) ( P1 ) and poly(ethyl 3‐(((2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl)methyl)amino) propanoate) ( P2 ) can be reversibly oxidized and reduced accompanied by obvious color changes from light purple to light blue for P1 , and from purple to blue for P2 . Furthermore, both P1 and P2 displayed higher optical contrasts (40–70%) in the visible region, favorable coloration efficiency (typically 50–230 cm² C^?1). From these results, the two polymers would be promising candidate materials for display applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2081–2091     

Synthesis and characterization of a novel electrochromic aromatic polyamide from AB‐type triphenylamine‐based monomer

A new triphenylamine‐based polyamide I was prepared by direct polycondensation of AB‐type monomer, 4‐amino‐4′‐carboxy‐4″‐methoxytriphenylamine ( 4 ), in the presence of triphenyl phosphite and pyridine as condensation agents. The obtained polyamide I showed excellent solubility in aprotic polar solvents such as NMP, DMAc, DMF, and DMSO and could be cast into transparent film with weight‐average molecular weight (M_w = 63,400) and polydispersity index (PDI = 1.79). The polyamide I exhibited good thermal stability with relatively high glass‐transition temperature (282 °C), 10% weight‐loss temperature above 470 °C under a nitrogen atmosphere, and char yield at 800 °C in nitrogen higher than 64%. It also showed maximum ultraviolet‐visible absorption at 362 nm and exhibited fluorescence emission maxima at 493 nm in NMP solution with fluorescence quantum yield 4.4%. Cyclic voltammogram of polyamide I film cast onto an indium tin oxide coated glass substrate exhibited one oxidative redox couple at 0.72 V (oxidation onset potential) versus Ag/AgCl in acetonitrile solution and revealed good stability of the electrochromic characteristic with a color change from colorless to green at applied potentials ranging from 0.00 to 1.10 V. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1988–2001, 2009     

Highly redox‐stable and electrochromic aramids with morpholinyl‐substituted triphenylamine units

A novel morpholinyl‐substituted, triphenylamine‐based diamine monomer, namely 4,4′‐diamino‐4″‐(4‐morpholinyl)triphenylamine, was synthesized and polymerized with various aromatic dicarboxylic acids via the phosphorylation polyamidation reaction leading to a series of electroactive aromatic polyamides (aramids). All aramids were readily soluble in polar organic solvents and could be solution cast into tough and flexible films with high thermal stability. Cyclic voltammograms of the aramid films on the indium‐tin oxide‐coated glass substrate exhibited a pair of reversible oxidation waves with very low onset potentials of 0.36 − 0.41 V (vs. Ag/AgCl) in acetonitrile solution. The polymer films showed reversible electrochemical oxidation accompanied by strong color changes with high coloration efficiency, high contrast ratio, and rapid switching time. The optical transmittance change (Δ%T) at 650 nm between the neutral state and the fully oxidized state is up to 90%. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1289–1298     

Synthesis and characterization of N‐substituted hyperbranched polyureas

N,N′‐disubstituted hyperbranched polyureas with methyl, benzyl, and allyl substitutents were synthesized starting from AB₂ monomers based on 3,5‐diamino benzoic acid. Carbonyl azide approach, which generates isocyanate group in situ on thermal decomposition, was used for the protection of isocyanate functional groups. The N‐substituted hyperbranched polymers can be considered as the new class of internally functionalized hyperbranched polyureas wherein the substituent can function either as receptor or as a chemical entity for selective transformations as a tool to tailor the properties. The chain‐ends were also modified by attaching long chain aliphatic groups to fully realize the interior functionalization. This approach opens up a possible synthetic route wherein different functional substituents can be used to generate a library of internally functionalized hyperbranched polymers. All the hyperbranched polyureas were characterized by FTIR, ¹H‐NMR, DSC, TGA, and size exclusion chromatography. Degree of branching in these N,N′‐disubstituted hyperbranched polyureas, as calculated by ¹H‐NMR spectroscopy using model compounds, was found to be lower than the unsubstituted hyperbranched polyurea and is attributed to the lower reactivity of N‐substituted amines compared to that of unsubstituted amines. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5134–5145, 2004     

A multifunctional poly(aryl ether) with oligoaniline and fluorene pendants: Synthesis,electrochromic performance,and tunable fluorescent properties

A novel multifunctional poly(aryl ether) with both pendant oligoaniline and fluorene groups (PAE‐p‐OF) was synthesized by nucleophilic polycondensation and characterized by ¹H NMR, Fourier‐transform infrared spectra, and gel permeation chromatography. The polymer showed excellent solubility in common organic solvents and good thermal stability. Electrochemical and photophysical properties were also investigated using cyclic voltammetry, UV–vis, and fluorescence spectroscopies. The obtained PAE‐p‐OF exhibits satisfactory electrochromic properties with high contrast value, acceptable coloration efficiency, and moderate switching times. Moreover, the fluorescence intensity of PAE‐p‐OF was modulated by controlling oxidation degree of oligoaniline moiety, due to the energy migration occurring between oligoaniline and fluorene groups. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and electrochromic properties of aromatic polyetherimides based on a triphenylamine‐dietheramine monomer

A series of electroactive polyetherimides (PEIs) with triphenylamine (TPA) units were prepared from the polycondensation reactions of 4,4′‐bis(p‐aminophenoxy)triphenylamine with aromatic tetracarboxylic dianhydrides via a conventional two‐step technique. The PEIs showed high thermal stability, with glass‐transition temperatures of 234–282 °C and decomposition temperatures in excess of 500 °C. They showed well‐defined and reversible redox couples during both p‐ and n‐doping processes, together with multielectrochromic behaviors. These polymers exhibited enhanced redox‐stability and electrochromic performance as compared with the corresponding analogs without the phenoxy spacer between the TPA and imide units. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2925–2938     

Triphenylamine‐based polyimides with trimethyl substituents for gas separation membrane and electrochromic applications

Two series of polyimides I – II with methyl‐substituted triphenylamine units were prepared from the diamines, 4,4′‐diamino‐2″,4″,6″‐trimethyltriphenylamine (Me₃TPA‐diamine; 1 ) and 4,4′‐diamino‐4″‐methyltriphenylamine (MeTPA‐diamine; 2 ), and two commercially available tetracarboxylic dianhydrides via a conventional two‐step chemical imidization. All the polymers were readily soluble in many polar solvents and showed useful levels of thermal stability associated with high glass transition temperatures (266–340 °C) and high char yields (higher than 49% at 800 °C in nitrogen). The polymer films showed reversible electrochemistry/electrochromism accompanied by a color change from neutral pale yellow to green oxidized form with good coloration efficiency, switching time, and stability. The CO₂ permeability coefficients (P_CO2) and permeability selectivity (P_CO2/P_CH4) for these polyimide membranes were in the range of 34.1–229.2 barrer and 21.3–28.9, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and proton conductivity studies of polystyrene‐based triazole functional polymer membranes

In this study, poly(vinylbenzylchloride) (PVBC) was produced by free‐radical polymerization of 4‐vinylbenzylchloride, and then it was functionalized with 3‐amino‐1,2,4‐triazole (ATri) and 1H‐1,2,4‐triazole (Tri). The composition of the polymers was verified by elemental analysis, and the structure was characterized by Fourier transform infrared and ¹³C‐nuclear magnetic resonance spectra. PVBC was modified by ATri with 68% and Tri with 50% yield. The polymers were doped with trifluoromethanesulfonic acid (TA) at various molar ratios, X = 0.5, 1, 2, and 3 with respect to aminotriazole and triazole units. Proton transfer from TA to the triazole rings was proved with Fourier transform infrared spectroscopy. Thermogravimetric analysis showed that the samples are thermally stable up to approximately 200 °C. Differential scanning calorimetry results illustrated the homogeneity of the materials. Under anhydrous conditions, PVBCATri3TA and PVBCTri3TA showed highest proton conductivity of 0.086 and 0.042 S/cm, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and photoluminescent and electrochromic properties of aromatic poly(amine amide)s bearing pendent N‐carbazolylphenyl moieties

A series of novel poly(amine amide)s ( IIa – IIl ) with pendent N‐carbazolylphenyl units having inherent viscosities of 0.25–1.06 dL/g were prepared via direct phosphorylation polycondensation from various dicarboxylic acids and a carbazole‐based aromatic diamine. Except for poly(amine amide) IIc , derived from trans‐1,4‐cyclohexanedicarboxylic acid, all the other amorphous poly(amine amide)s were readily soluble in many polar solvents, such as N,N‐dimethylacetamide and N‐methyl‐2‐pyrrolidone (NMP), and could be cast into transparent and flexible films. The aromatic poly (amine amide)s had useful levels of thermal stability associated with relatively high glass‐transition temperatures (268–331 °C), 10% weight loss temperatures in excess of 540 °C, and char yields at 800 °C in nitrogen higher than 60%. These polymers exhibited maximum ultraviolet–visible absorption at 293–361 nm in NMP solutions. Their photoluminescence in NMP solutions exhibited fluorescence emission maxima around 362 and 448–499 nm for aromatic–aliphatic poly(amine amide)s IIa – IIc and aromatic poly (amine amide)s IId – IIl , respectively. The fluorescence quantum yield in NMP solutions ranged from 0.34% for IIj to 4.44% for IIa . The hole‐transporting and electrochromic properties were examined with electrochemical and spectroelectrochemical methods. Cyclic voltammograms of the poly(amine amide) films cast onto an indium tin oxide coated glass substrate exhibited reversible oxidation at 0.81 V and irreversible oxidation redox couples at 1.20 V versus Ag/AgCl in acetonitrile solutions, and they revealed excellent stability of the electrochromic characteristics, with a color change from yellow to green at applied potentials ranging from 0.00 to 1.05 V. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4108–4121, 2006     

Fluoropolyethers end‐capped by polar functional groups. III. Kinetics of the reactions of hydroxy‐terminated fluoropolyethers and model fluorinated alcohols with cyclohexyl isocyanate catalyzed by organotin compounds

The kinetics of the dibutyltin dilaurate (DBTDL)‐catalyzed urethane formation reactions of cyclohexyl isocyanate (CHI) with model monofunctional fluorinated alcohols and fluoropolyether diol Z‐DOL H‐1000 of various molecular weights (100–1084 g mol^?1) in different solvents were studied. IR spectroscopy and chemical titration methods were used for measuring the rate of the total NCO disappearance at 30–60 °C. The effects of the reagents and DBTDL catalyst concentrations, the solvent and hydroxyl‐containing compound nature, and the temperature on the reaction rate and mechanism were investigated. Depending on the initial reagent concentration and solvent, the reactions could be well described by zero‐order, first‐order, second‐order, or more complex equations. The reaction mechanism, including the formation of intermediate ternary or binary complexes of reagents with the tin catalyst, could vary with the concentration and solvent and even during the reaction. The results were treated with a rate expression analogous to those used for enzymatic reactions. Under the explored conditions, the rate of the uncatalyzed reaction of fluorinated alcohols with CHI was negligible. Moreover, there was no allophanate formation, nor were there other side reactions, catalysis by urethane in the absence of DBTDL, or a synergetic effect in the presence of the tin catalyst. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3771–3795, 2002