Fabrication and photoluminescence properties of Ag0 and Ag0–Er3+ containing plasmonic glass nanocomposites in the K2O–ZnO–SiO2 system

Here, we report the preparation of nano silver (Ag) and nano Ag-erbium (Ag–Er) co-embedded potassium–zinc-silicate based monolithic glass nanocomposites by a controlled heat-treatment process of precursor glasses. The nanocomposites were characterized by differential scanning calorimeter, dilatometer, UV–Visible absorption spectrophotometer, X-ray diffractometer and transmission electron microscope and spectroflurimeter. A strong surface plasmon resonance (SPR) band is observed around 430 nm in all the heat-treated glass nanocomposite samples due to the formation of Ag⁰ nanoparticles (NP). The Ag-glass nanocomposite samples display nearly 2-fold enhanced photoluminescence (PL) at 470 nm upon excitation at 290 nm until the size of the NP increases to the value equals to the mean free path of conduction electrons inside the particles. On contrary to this, the photoluminescence spectra of Er³⁺ ions exhibit a gradual decrease of NIR emission at 1540 nm due to ⁴I_13/2 → ⁴I_15/2 transition under excitation at 523 nm in the heat-treated glass nanocomposites which happened due to excitation energy transfer of Er³⁺ ions to the Ag NP, acting as ‘plasmonics diluents’ for Er³⁺ ions. These nanocomposites have huge potential for various nanophotonic applications.     

Synthesis of silver nanoparticles in mesoporous high-aluminum aluminosilicate matrices

A new method for the synthesis of Ag/Al_xSi_1–x O_2–0.5x nanocomposite materials was proposed. The method is based on the use of charged mesoporous aluminosilicate matrices as nanoreactors. The porous structure of the matrices was characterized by ²⁷Al NMR spectroscopy and nitrogen capillary sorption at 77 K. An increase in the aluminum loading destroys the matrix structure and decreases the specific surface area. The resulting aluminosilicates were used as matrices for the synthesis of silver nanoparticles. The nanocomposites were examined by transmission electron microscopy and chemical analysis to estimate the silver percentage in specimens. Silver nanowires (20% Ag) are formed in the low-aluminum (<10 mol.%) matrices, whereas an increase in the aluminum percentage affords both nanowires and spherical particles 3–10 nm in size and decreases the total amount of silver in the nanocomposite.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2391–2393, November, 2004.     

Green conversion of a three‐dimensional organometallic coordination polymer to a three‐dimensional organometallic supramolecular polymer upon mechanochemical 2‐aminopyridine addition

Green conversion of three‐dimensional organometallic [Ag₂(μ₆‐tp)]_n ( 1 ) coordination polymer (CP) nanosheets, prepared by sonochemical procedure, to three‐dimensional organometallic [Ag₂(μ₄‐tp)(apy)₂]_n ( 2 ) (where H₂tp = terephthalic acid and apy = 2‐aminopyridine) CP nanoparticles has been observed upon solid‐state mechanochemical reaction of compound 1 with 2‐aminopyridine. The AgO₃ Ag ···C₆ coordination sphere of silver ion in 1 changed to NO₂ Ag ···C coordination sphere in 2 during this mechanochemical addition. These samples were characterized by infrared spectroscopy, thermogravimetric and differential thermal analyses, X‐ray powder diffraction and scanning electron microscopy.     

Red to Blue High Electrochromic Contrast and Rapid Switching Poly(3,4‐ethylenedioxypyrrole)–Au/Ag Nanocomposite Devices for Smart Windows

Poly(3,4‐ethylenedioxypyrrole) (PEDOP)–Ag and PEDOP–Au nanocomposite films have been synthesized for the first time by electropolymerization of the conducting‐polymer precursor in a waterproof ionic liquid, 1‐butyl‐1‐methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, followed by Ag/Au nanoparticle incorporation. That the Ag/Au nanoparticles are not adventitious entities in the film is confirmed by a) X‐ray photoelectron spectroscopy, which provides evidence of Ag/Au–PEDOP interactions through chemical shifts of the Ag/Au core levels and new signals due to Ag–N(H) and Au–N(H) components, and b) electron microscopy, which reveals Au nanoparticles with a face‐centered‐cubic crystalline structure associated with the amorphous polymer. Spectroelectrochemistry of electrochromic devices based on PEDOP–Au show a large coloring efficiency (η_max=270 cm² C^?1, λ=458 nm) in the visible region, for an orange/red to blue reversible transition, followed by a second, remarkably high η_max of 490 cm² C^?1 (λ=1000 nm) in the near‐infrared region as compared to the much lower values achieved for the neat PEDOP analogue. Electrochemical impedance spectroscopy studies reveal that the metal nanoparticles lower charge‐transfer resistance and facilitate ion intercalation–deintercalation, which manifests in enhanced performance characteristics. In addition, significantly faster color–bleach kinetics (five times of that of neat PEDOP!) and a larger electrochemical ion insertion capacity unambiguously demonstrate the potential such conducting‐polymer nanocomposites have for smart window applications.     

Synthesis of core‐shell silver–polyaniline nanocomposites by gamma radiolysis method

Core‐shell silver (Ag)–polyaniline (PAni) nanocomposites have been synthesized by the in‐situ gamma radiation‐induced chemical polymerization method. Aqueous solution of aniline, a free‐radical oxidant, and/or silver metal salt were irradiated by γ‐rays. Reduction of the silver salt in aqueous aniline leads to the formation of silver nanoparticles which in turn catalyze oxidation of aniline to polyaniline. The resultant Ag‐PAni nanocomposites were characterized by using different spectroscopy analyses like X‐ray photoelectron, UV–visible, and infrared spectroscopy. The optical absorption bands revealed that the bands at about 400 nm are due to the presence of nanosilver and the blue‐shifted peak at ～ 555 nm is due to the presence of metallic silver within the PAni matrix. X‐ray diffraction pattern clearly indicates the broad amorphous polymer and the sharp metal peaks. Scanning electron microscopy and transmission electron microscopy of the nanocomposite showed a uniform size distribution with spherical and granular morphology. Thermogravimetric analysis revealed that the composites have a higher degradation temperature than polyaniline alone. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5741–5747, 2007     

Facile Synthesis of Fe<Subscript>x</Subscript>O<Subscript>y</Subscript>/Ag Nanocomposites for Multifunctional and Efficient Catalytic Applications

In this study, the iron oxide/silver (Fe_xO_y/Ag) nanocomposite has been successfully prepared by a facile one-step method using goethite (α-FeOOH) rods as support. The diameter of the as-synthesized goethite rods was between 250 and 500 nm and the silver nanoparticles sizes were about 10–50 nm. By varying the concentrations, the Fe_xO_y/Ag nanocomposite with different Ag contents are successfully obtained. The Fe_xO_y/Ag nanocomposite was characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and energy dispersive spectroscopy, respectively. Due to the unique nanostructure, these nanocomposites can catalyze degradation of both aromatic nitro compounds and organic dyes only within a few minutes, which show high catalytic performance.     

Antimicrobial,mechanical, barrier,and thermal properties of bio‐based poly (butylene adipate‐co‐terephthalate) (PBAT)/Ag2O nanocomposite films for packaging application

Bio‐based nanocomposites of poly (butylene adipate‐co‐terephthalate) (PBAT)/silver oxide (Ag₂O) were prepared by the composite film casting method using chloroform as the solvent. The prepared Ag₂O at different ratios (1, 3, 5, 7, and 10 wt%) is incorporated in the PBAT. The PBAT nanocomposite films were subjected to structural, thermal, mechanical, barrier, and antimicrobial properties. The electron micrographs indicated uniform distribution of Ag₂O in the PBAT matrix. However, the images indicated agglomeration of Ag₂O particles at 10 wt% loading. The thermal stability of the nanocomposite films increased with Ag₂O content. The tensile strength and elongation of the composite films were found to be higher than those of PBAT and increased with Ag₂O content up to 7 wt%. The PBAT‐based nanocomposite films showed the lower oxygen and water vapor permeability when compared to the PBAT film. Antimicrobial studies were performed against two food pathogenic bacteria, namely, Klebsiella pneumonia and Staphylococcus aureus.     

Ultrasound‐assisted Synthesis of Ag‐ZnS/rGO and its Utilization in Photocatalytic Degradation of Tetracycline Under Visible Light Irradiation

Recent improvements based on heterojunction nanocomposites have opened new possibilities in photocatalysis. In this research, an ultrasound‐assisted coprecipitation method was used to fabricate silver, zinc sulfide and reduced graphene oxide (Ag‐ZnS/rGO) nanocomposite, and characterization results indicated that 3% Ag‐ZnS spherical nanoparticles are successfully embedded in rGO matrix. The potential of the Ag‐ZnS/rGO, as a visible light active photocatalyst, was assessed through optimizing degradation of Tetracycline (TC) by response surface methodology. It was found that the photocatalytic degradation of TC increased with an increase in the amount of nanocomposite and irradiation time, whereas it decreased with increasing the initial TC concentration. Under the optimal conditions (10 mg L^?1 of TC, 1.25 g L^?1 of Ag‐ZnS/rGO, at pH = 7, and irradiation duration 110 min), more than 90% of the TC was degraded. The study of the mechanism of the photocatalytic process disclosed that the synergistic role of surface plasmon resonance (SPR) induced by Ag nanoparticles and p‐type semiconductor feature of rGO leads to ZnS semiconductor stimulation in the visible light region. Eventually, a pseudo‐first order kinetics model was developed based on the proposed mechanism. The obtained results highlight the role of Ag‐ZnS/rGO nanophotocatalyst toward degradation of some antibiotics under visible light.     

Green synthesis of reduced graphene oxide/Fe3O4/Ag ternary nanohybrid and its application as magnetically recoverable catalyst in the reduction of 4‐nitrophenol

Materials having both magnetic and catalytic properties have shown great potential for practical applications. Here, a reduced graphene oxide/iron oxide/silver nanohybrid (rGO/Fe₃O₄/Ag NH) ternary material was prepared by green synthesis of Ag on pre‐synthesized rGO/Fe₃O₄. The as‐prepared rGO/Fe₃O₄/Ag NH was characterized using Fourier transform infrared spectroscopy, X‐ray diffractometry, Raman spectroscopy, vibrating sample magnetometry, transmission electron microscopy and energy‐dispersive X‐ray spectroscopy. rGO sheets were covered with Fe₃O₄ (8–16 nm) and Ag (18–40 nm) nanoparticles at high densities. The mass percentages were 13.47% (rGO), 62.52% (Fe₃O₄) and 24.01% (Ag). rGO/Fe₃O₄/Ag NH exhibited superparamagnetic behavior with high saturated magnetization (29 emu g⁻¹ at 12 kOe), and efficiently catalyzed the reduction of 4‐nitrophenol (4‐NP) with a rate constant of 0.37 min⁻¹, comparable to those of Ag‐based nanocatalysts. The half‐life of 4‐NP in the presence of rGO/Fe₃O₄/Ag NH was ca 1.86 min. rGO/Fe₃O₄/Ag NH could be magnetically collected and reused, and retained a high conversion efficiency of 94.4% after the fourth cycle. rGO/Fe₃O₄/Ag NH could potentially be used as a magnetically recoverable catalyst in the reduction of 4‐NP and environmental remediation.     

Preparation of colloidal stable fluoroalkyl end‐capped oligomer/silver nanocomposites––application to the surface modification of traditional organic polymers with these nanocomposites

A variety of fluoroalkyl end‐capped oligomers/silver nanocomposites were prepared by the reactions of silver ions with poly(methylhydrosiloxane) in the presence of fluoroalkyl end‐capped N,N‐dimethylacrylamide oligomer, N‐(1,1‐dimethyl‐3‐oxobutyl)acrylamide oligomer, N,N‐dimethylacrylamide cooligomer containing poly(dimethylsiloxane) segments in organic media such as toluene and 1,2‐ dichloroethane. These fluorinated oligomers/silver nanocomposites thus obtained were found to exhibit clear plasmon absorption bands around 420 nm related to the formation of silver nanoparticles. In particular, these composites could display narrow plasmon absorptions around 420 nm in toluene by the addition of trioctylamine (TOA). On the other hand, the corresponding non‐fluorinated N‐(1,1‐ dimethyl‐3‐oxobutyl)acrylamide oligomer was not able to afford such a plasmon absorption under similar conditions. These fluorinated oligomers/silver nanocomposites in organic media have been found to be stable for more than 10 days. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) measurements showed that silver nanoparticles could be effectively encapsulated into fluorinated oligomeric aggregate cores to afford colloidal stable fluorinated oligomers/silver nanocomposites. Fluorinated oligomers/silver nanocomposites were also applied to the surface modification of traditional organic polymers such as polystyrene (PSt) and poly(methyl methacrylate) (PMMA) to exhibit not only a good oleophobicity imparted by fluorine but also a higher surface antibacterial activity related to the silver nanoparticles on their surface. Copyright © 2007 John Wiley & Sons, Ltd.     

Luminescent Property of a Supramolecular Silver(I)‐Thiolate Complex Based on Secondary Ag‐S Interactions and Hydrogen Bonds

The supramolecular silver(I)‐thiolate complex [Ag(μ₂‐SC₄N₂H₄)₂(SCN)]_n has been prepared from the reaction of AgSCN and pyrimidine‐2‐thiol in DMF. X‐ray diffraction analysis shows that the supramolecular structure exhibits one‐dimensional chain through the secondary Ag‐S interactions and the chains are further linked by strong hydrogen bonds to form a three dimensional network. The luminescence effect from the silver‐centered state of S→Ag LMCT in solid state is different from that in solution due to the secondary Ag‐S interactions.     

Metal nanocomposite films prepared in situ from PVA and silver nitrate. Study of the nanostructuration process and morphology as a function of the in situ routes

Cast‐hybrid films composed of polyvinyl alcohol (PVA) and silver nitrate were treated according to three different ways, thermal annealing, UV‐irradiation, and chemical reduction by a borohydride solution, to obtain PVA/silver nanocomposite films. The nanostructuration process was studied as a function of the treatment conditions, and discussed as a function of the mobility state of the polymer chains in the nanocomposite matrix during treatment. A homogeneous dispersion of crystalline silver nanoparticles was obtained by thermal annealing above T_g and below T_m and UV‐lamp irradiation below T_g. For these two treatments, the major processing parameters were the annealing temperature and time and the UV‐exposure time, respectively. For low‐conversion rate in Ag(0), the films evolved upon ageing at room temperature. Totally different morphology and Ag(0) conversion were achieved by chemical reduction in a borohydride solution. All the silver ions were reduced into Ag(0), and crystalline silver nanoparticles layers parallel to the film surface were observed after the treatment. This morphology was related to the high‐swollen state of the polymer matrix during treatment. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2062–2071, 2008     

Scope of network polysilanes in the synthesis of fluorescent silver and gold nanoparticles/nanoclusters‐modulations of their optical properties in the presence of Hg(II) ions

The network polysilanes (polysilynes) [RMe₂SiCH₂CH₂Si]_n, [R=Ph ( 1 ), 2‐Furyl ( 2 )] have been synthesized by room temperature reaction of the corresponding organotrichlorosilane with Na dispersion in tetrahydrofuran (THF) medium. The method allows the formation of high molecular weight polymers [M_w/PDI = 10,504/2.2 ( 1 ), 9176/1.5 ( 2 )] in improved yields than those obtained from classical Wurtz coupling reaction (Na, toluene, 110 °C). These polymers act as reducing agents for Ag(I) and Au(III) ions to afford stable metal nanoparticles of 4–8 nm size domains in toluene medium. The corresponding polymer–silver nanocomposites, 1a and 2a , are fluorescent in the green light region (λ_max = ～ 530 nm) due to the formation of silver nanoclusters (AgNCs) along with the nanoparticles (AgNPs). A simple chemical approach has been developed to modulate the plasmonic and emission intensities of the nanocomposite 1a by reacting with varying concentrations (10^?12 to 10^?7M) of HgI₂ in toluene. The method allows enhancement of the fluorescence intensity associated with AgNCs. The results are explained by invoking coupling between the energies of surface plasmon resonance and the nanocluster electronic transition. The polymer–gold nanocomposites, 1b and 2b , are non‐fluorescent and the plasmonic resonance at 530 nm associated with AuNPs is found to be insensitive to Hg(II) ions. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

核壳结构Ag@BaGdF5:Yb3+,Ho3+多功能纳米复合材料的制备及其性能

采用简单的液相法制备了核壳结构的Ag@BaGdF_5∶Yb~(3+),Ho~(3+)纳米复合材料。XRD测试表明复合材料中含有立方相的Ag和立方相的BaGdF_5。电镜照片表明复合粒子为球形,包覆后颗粒变大,包覆层BaGdF_5∶Yb~(3+),Ho~(3+)的厚度约为14 nm。荧光光谱测试表明复合材料具有良好的上转换发光性能,以绿光发射最强,同时样品具有良好的顺磁性和光热转换性能。MTT测试表明复合材料具有良好的生物相容性,将其同HeLa细胞共同培养后用980 nm激光照射,具有明亮的绿色上转换荧光成像。将不同浓度的纳米复合材料和商用计算机断层扫描(CT)成像造影剂碘比醇进行比较,纳米复合材料具有更高的CT成像性能。在NIR照射下,纳米复合材料生成的热足以有效杀死HeLa细胞。     

Preparation and thermal stability of fluoroalkyl end‐capped vinyltrimethoxysilane oligomeric silica/boric acid nanocomposites‐encapsulated a variety of low molecular weight organic compounds

Fluoroalkyl end‐capped vinyltrimethoxysilane oligomer [R_F‐(VM)_n‐R_F] reacted with boric acid to afford the corresponding fluorinated oligomeric silica/boric acid nanocomposite [R_F‐(VM? SiO₂)_n‐R_F/B(OH)₃] fine particles with mean diameter: 36–105 nm. The obtained R_F‐(VM? SiO₂)_n‐R_F/B(OH)₃ nanocomposites were applied to the encapsulation of low molecular weight organic compounds such as diphenylsilanediol, 1,1′‐bi‐2‐naphthol, 4,4′‐biphenol, bisphenol A, bisphenol F, bisphenol AF, biphenyl, dibenzyl, and pentaerythritol into these nanocomposite cores to provide the corresponding fluorinated oligomeric silica/boric acid nanocomposites—encapsulated these organic molecules. Interestingly, the obtained nanocomposites were found to exhibit no weight loss behavior corresponding to the contents of these guest molecules even after calcination at 800 °C, although these nanocomposites were isolated through no purification process. The R_F‐(VM? SiO₂)_n‐R_F nanocomposites—encapsulated these organic guest molecules were prepared under similar conditions. However, it was demonstrated that these nanocomposites can provide the clear weight loss corresponding to the contents of these guest molecules in the nanocomposites after calcination at 800 °C. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3835–3845     

Microwave‐Hydrothermal Preparation and Visible‐Light Photoactivity of Plasmonic Photocatalyst Ag‐TiO2 Nanocomposite Hollow Spheres

Visible‐light‐driven plasmonic photocatalyst Ag‐TiO₂ nanocomposite hollow spheres are prepared by a template‐free chemically‐induced self‐transformation strategy under microwave‐hydrothermal conditions, followed by a photochemical reduction process under xenon lamp irradiation. The prepared samples are characterized by using scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, N₂ adsorption‐desorption isotherms, X‐ray photoelectron spectroscopy, UV/Vis and Raman spectroscopy. Production of ?OH radicals on the surface of visible‐light illuminated TiO₂ was detected by using a photoluminescence method with terephthalic acid as the probe molecule. The photocatalytic activity of as‐prepared samples was evaluated by photocatalytic decolorization of Rhodamine B (RhB) aqueous solution at ambient temperature under visible‐light irradiation. The results show that the surface plasmon absorption band of the silver nanoparticles supported on the TiO₂ hollow spheres was red shifted, and a strong surface enhanced Raman scattering effect for the Ag‐TiO₂ nanocomposite sample was observed. The prepared nanocomposite hollow spheres exhibits a highly visible‐light photocatalytic activity for photocatalytic degradation of RhB in water, and their photocatalytic activity is higher than that of pure TiO₂ and commercial Degussa P25 (P25) powders. Especially, the as‐prepared Ag‐TiO₂ nanocomposite hollow spheres at the nominal atomic ratio of silver to titanium ( R ) of 2 showed the highest photocatalytic activity, which exceeds that of P25 by a factor of more than 2.     

Simultaneous synthesis of silver nanoparticles and poly(2,5‐dimethoxyaniline) in poly(styrene sulfonic acid)

Silver nanoparticles were formed in situ along with poly(2,5‐dimethoxyaniline) (PDMA) in an interconnected network matrix (reactor), comprising the electronic conductive polymer, PDMA, and a polyelectrolyte, poly(styrene sulfonic acid) (PSS), through the simultaneous reduction of Ag⁺ ions and polymerization of 2,5‐dimethoxyaniline. In situ ultraviolet‐visible spectroscopy showed that peaks corresponding to the plasmon resonance of silver nanoparticles at 411 nm and the polaronic transition of PDMA at 438 nm provided evidences for the simultaneous formation of silver nanoparticles and PDMA. Transmission electron microscopy and size distribution analysis revealed the presence of spherical silver nanoparticles with an average diameter of 12 nm in the composite. X‐ray photoelectron spectroscopy showed that the amine units in PDMA changed to imine units upon the formation of silver nanoparticles. A comprehensive mechanism for the formation of the PDMA‐PSS‐Ag nanocomposite is proposed. A 10‐fold increase in the conductivity was noticed for the PDMA–PSS–Ag nanocomposite (1 S/cm) in comparison with the PDMA–PSS composite (0.1 S/cm). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3843–3852, 2006     

Glass‐transition temperature behavior of alumina/PMMA nanocomposites

Alumina/poly(methyl methacrylate) (PMMA) nanocomposites were synthesized by an in situ free‐radical polymerization process with 38 and 17 nm diameter γ‐alumina nanoparticles. At extremely low filler weight fractions (<1.0 wt % of 38 nm fillers or < 0.5 wt % of 17 nm fillers) the glass‐transition temperature (T_g) of the nanocomposites drops by 25 °C when compared to the neat polymer. Further additions of filler (up to 10 wt %) do not lead to additional T_g reductions. The thermal behavior is shown to vary with particle size, but this dependence can be normalized with respect to a specific surface area. The nanocomposite T_g phenomenon is hypothesized to be because of nonadhering nanoparticles that serve as templates for a porous system with many internal interfaces that break up the percolating structure of dynamically heterogeneous domains recently suggested by Long, D.; and Lequeux, F. Eur Phys J E 2001, 4, 371 to be responsible for the T_g reductions in polymer ultrathin films. The results also point to a far field effect of the nanoparticle surface on the bulk matrix. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4371–4383, 2004     

Preparation and characterization of nanocomposite ZnO–Ag thin film containing nano-sized Ag particles: influence of preheating,annealing temperature and silver content on characteristics

Nanocomposite ZnO–Ag thin film containing nano-sized Ag particles have been grown on glass substrate by spin-coating technique using zinc acetate dihydrate as starting precursor in 2-propanol as solvent and monoethanolamine as stabilizer. Silver nanoparticles were added in the ZnO sol using silver nitrate dissolved in ethanol-acetonitrile. Their structural, electrical, crystalline size and optical properties were investigated as a function of preheating, annealing temperature and silver content. The results indicated that the crystalline phase was increased with increase of annealing temperature up to 550 °C at optimum preheating temperature of 275 °C. Thermal gravimetric differential thermal analysis results indicated that the decomposition of pure ZnO and nanocomposite ZnO–Ag precursors occurred at 225 and 234 °C, respectively with formation of ZnO wurtzite crystals. The scanning electron microscopy and atomic force microscopy revealed that the surface structure (the porosity and grain size) of the ZnO–Ag thin film (the film thickness is about 379 nm) was changed compared to pure ZnO thin film. The result of transmission electron microscopy showed that Ag particles were about 5 nm and ZnO particles 58 nm with uniform silver nanoclusters. Optical absorption results indicated that optical absorption of ZnO–Ag thin films decreased with increase of annealing temperature. Nanocomposite ZnO–Ag thin films with [Ag] = 0.068 M and [Ag] = 0.110 M showed an intense absorption band, whose maximum signals appear at 430 nm which is not present in pure ZnO thin films. The result of X-ray photoelectron spectroscopy revealed that the binding energy of Ag 3d_5/2 for ZnO–Ag shifts remarkably to the lower binding energy compared to the pure metallic Ag due to the interaction between Ag and ZnO.     

Catalytic soot combustion of α-Fe/Ce–K–O nanocomposites via citrate-gel route

The binary phase, porous, nanocomposite xα-Fe/(1 − x)Ce_0.9–K_0.1–O (x = 0.05–0.2) catalysts and the catalyst-coated honeycomb ceramic device have been prepared by the citrate-gel thermal decomposition-reduction process and the sol–gel assisted dip-coating method, respectively. The nanocomposite of fluorite-type structure CeO₂ nanoparticles about 18–51 nm and α-Fe nanoparticles about 32 nm is obtained at 600 °C for 2 h in a deoxidization atmosphere and the α-Fe in nanocomposite has the suppression effect on grain growth of CeO₂. With Fe content increasing from 0.05 to 0.1, the specific surface area for the nanocomposites increases dramatically from about 4.4 to 43.0 m²/g, reaching a maximum value 57.7 m²/g at x = 0.15, and the pores vary from macropores to micro- or mesopores. Due to the presence of nano α-Fe, all the catalysts exhibit a very high soot catalytic activity, with the lowest T₂₀ (255 °C) and T₅₀ (291 °C) for the nanocomposite with x = 0.15, and it is confirmed by the bench test under practical diesel exhaust gases.