Ionic liquid functionalized graphene oxide for enhancement of styrene‐butadiene rubber nanocomposites

Ionic liquid 1‐allyl‐3‐methyl‐imidazolium chloride (AMICl) is used to fine‐tune the surface properties of graphene oxide (GO) sheets for fabricating ionic liquid functionalized GO (GO‐IL)/styrene‐butadiene rubber (SBR) nanocomposites. The morphology and structure of GO‐IL are characterized using atomic force microscope, X‐ray diffraction, differential scanning calorimetry, X‐ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, UV‐vis spectra and Raman spectra. The interaction between GO and AMICl molecules as well as the effects of GO‐IL on the mechanical properties, thermal conductivity and solvent resistance of SBR are thoroughly studied. It is found that AMICl molecules can interact with GO via the combination of hydrogen bond and cation–π interaction. GO‐IL can be well‐dispersed in the SBR matrix, as confirmed by X‐ray diffraction and scanning electron microscope. Therefore, the SBR nanocomposites incorporating GO‐IL exhibit greatly enhanced performance. The tensile strength, tear strength, thermal conductivity and solvent resistance of GO‐IL/SBR nanocomposite with 5 parts per hundred rubber GO‐IL are increased by 505, 362, 34 and 31%, respectively, compared with neat SBR. This method provides a new insight into the fabrication of multifunctional GO‐based rubber composites. Copyright © 2016 John Wiley & Sons, Ltd.     

Thermal stability of acrylonitrile/chlorosulphonated polyethylene rubber blend

The properties of chlorosulphonated polyethylene (CSM) rubber, acrylonitrile rubber (NBR) and their blend (50/50 w/w) were studied. Fourier transform infrared (FTIR) studies supported that CSM/NBR rubber blend is self curable, when cross-linking takes place between acrylonitrile groups of NBR and –SO₂Cl groups or in situ generated allyl chloride moieties of CSM. The thermal stability of vulcanizates was analyzed in nitrogen by thermogravimetry. It was found that the initial degradation temperature of elastomer based on CSM rubber is lower than of pure NBR rubber. By adding NBR to CSM rubbers, the degradation temperature of crosslinked material increased, indicating higher thermal stability. The activation energy for the degradation are determined using the Arrhenius equation The activation energies for the rubber blends are higher than for elastomers based on pure rubbers. It was found that the mass loss of the blends at any temperature was between those of the pure rubbers. The differential scanning calorimetry (DSC) was used for the glass transition temperature determination. It is estimated thermodynamic immiscibility of NBR/CSM blend based on noticed two different glass transition temperatures, corresponding to CSM and NBR rubbers.     

Intumescent flame retardation and silane crosslinking of PP/EPDM elastomer

This study deals with the silane crosslinking and intumescent flame retardation of polypropylene/ethylene‐propylene‐diene copolymer (PP/EPDM) elastomers. The effect of silane crosslinking on the flame retardancy of the PP/EPDM composites containing melamine phosphate (MP) and dipentaerythritol (DPER) was studied by limiting oxygen index, UL 94 and cone calorimetry tests. The chemical composition of the silane crosslinked and flame retarded PP/EPDM composites treated at different temperatures was studied by X‐ray photoelectron spectroscopy and real time Fourier transform infrared (FTIR) spectrometry. Thermal decomposition and crystallization behavior of the PP/EPDM composites were investigated using thermogravimetric analysis and differential scanning calorimetry, respectively. Moreover, the mechanical properties of the composites were also studied. It is found that the flame retardancy, mechanical properties, and thermal decomposition behavior of the composites are influenced by silane grafting and crosslinking. Copyright © 2008 John Wiley & Sons, Ltd.     

Preparation and characterization of a new class of poly(ether‐block‐amide)s via solvent free reactive processing

Novel poly(ether‐co‐amide) block copolymers (PEA) with polyamide‐6 as hard segments and different polyether (polyoxytetramethylene glycol [PTMG]/polyethylene glycol [PEG]) as soft segments were prepared via reactive processing. The chemical structure, crystalline properties, mechanical properties, water resistance, and thermal stability of as‐prepared PEAs were extensively studied by Fourier transform infrared spectroscopy, X‐ray diffraction, differential scanning calorimetry, dynamic mechanical analysis, tensile testing, water contact angle, water absorption, and thermal gravity analysis. Fourier transform infrared spectroscopy confirmed the chemical structure and composition of PEAs. The X‐ray diffraction and differential scanning calorimetry showed that PEAs consist of obvious crystalline polyamide‐6 hard segments and that the crystalline structure of PEG will be significantly changed with the addition of PTMG. Dynamic mechanical analysis and tensile testing showed that the obtained PEAs exhibit classical elastomeric rubber plateau and tensile behavior. Meanwhile, the introduction of PTMG will improve the mechanical properties of PEAs. PEA with PEG as soft segments exhibited extremely surface hydrophilicity and high water absorption of 127%; the increasing of PTMG content in soft segments will reduce the surface hydrophilicity and improve the water resistance. In addition, the obtained PEAs exhibited good thermal stability, which will meet requirement of multiple processing.     

Dichlorocarbene modified butadiene rubber (DCBR): Preparation,kinetic study,and its properties in natural rubber/DCBR blend vulcanizates

Dichlorocarbene modified butadiene rubber (DCBR) was prepared via the addition of the dichlorocarbene group in the presence of 2 phase transfer agents (cetyltrimethylammonium bromide and tetraethylammonium chloride). The effects of the reaction temperature and time, amount of dichlorocarbene precursor, and the type and amount of phase transfer agent on the chlorine content were investigated. The highest chlorine content (30%) in DCBR was obtained using 0.062 mol chloroform and 0.003 mol cetyltrimethylammonium bromide at room temperature for 19 hours although 27.9% was obtained after 12 hours. The kinetics of this dichlorocarbene modification was best described by the pseudo–first order rate law with 2 rate constants. For practical applications, the DCBR with chlorine contents of 10%, 20%, or 30% were blended with natural rubber (NR) and then vulcanized using the sulfur‐curing system. Although the polarity of DCBR was increased, a good compatibility between NR and DCBR still existed, resulting in improved mechanical properties. The oil resistance, flame retardant, and ozone resistance properties of the NR/DCBR blend vulcanizates were enhanced compared to those of a NR/butadiene rubber blend vulcanizate, which was related to the amount of chlorine incorporated into the DCBR.     

Microencapsulated ammonium polyphosphate with polyurethane shell: preparation,characterization, and its flame retardance in polyurethane

A series of polyurethane (PU) microencapsulated ammonium polyphosphate (MCAPP) were prepared by in situ polymerization from toluene‐2,4‐diisocyanate (TDI), polyethylene glycol (PEG), and pentaerythtritol (PER). And the structure was characterized by Fourier transform infrared spectroscopy (FTIR) and X‐ray photoelectron spectroscopy (XPS). Then it chose the optimal PEG constituent to design microcapsule from scanning electron microscopy (SEM) and water solubility test. The combustion and thermal degradation behaviors of PU blended APP or MCAPP were investigated by thermogravimetric analysis (TGA), UL‐94 test, and microcombustion calorimetry. The results showed that the PU/MCAPP had better thermal stability and flame retardance, due to the stable char forming by APP and PU shell. Moreover, the water resistance of flame retarded PU composite was greatly improved. Copyright © 2009 John Wiley & Sons, Ltd.     

Preparation and characterization of flame retardant and low smoke releasing oil-resistant EVA/NBR blends

Nano-Si O2 and/or Mo O3 were introduced to ethylene-vinyl acetate/nitrile butadiene rubber(EVA/NBR) blends containing magnesium hydroxide(MH) and red phosphorus(RP) to further improve the mechanical properties, oil resistance, smoke suppression and flame retardancy. The results indicated that the tensile strength and oil resistance were significantly improved by incorporating nano-Si O2. Smoke suppression tests for EVA/NBR blend samples showed that both nano-Si O2 and Mo O3 can significantly reduce smoke release amount. The flammability characterization indicated that the blended sample with an LOI value of 33.0 could achieve V-0 level in the UL-94 test. Cone calorimetry test data showed the peak heat release rate was 67% lower than that for pure EVA/NBR. Thermal analysis showed that the presence of both nano-Si O2 and Mo O3 was beneficial to promoting char formation of the EVA/NBR blends. Char residual analysis suggested that Mo O3 aggregated in solid phase during combustion.     

Crosslinking induced by in‐situ coordination in acrylonitrile butadiene rubber/poly(vinyl chloride) alloy,filled with anhydrous copper sulfate particles

Acrylonitrile butadiene rubber (NBR)/poly(vinyl chloride) (PVC) alloy, filled with anhydrous copper sulfate (CuSO₄) particles, was investigated for the first time. The material could be crosslinked in the existence of CuSO₄ by heat pressing, without any other crosslink agents. The crosslinking in the material was induced by in situ coordination between nitrile groups of NBR and solid CuSO₄ particles, which is thoroughly different from the traditional vulcanization of rubber materials. The coordination crosslinking is formed during heat pressing, other than in solutions, which is valuable for practical applications. The resulting material showed excellent tensile properties, and the maximum strength was close to 90 MPa. The CuSO₄ particles act not only as crosslink agents, but also as reinforcing fillers in the polymer matrix. In this work, dynamic mechanical analysis, differential scanning calorimetry, Fourier transform infrared spectrum, X‐ray photoelectron spectroscopy, scanning electron microscope, energy‐dispersive X‐ray spectrum, equilibrium swelling method, and tensile test were performed for the characterization of the material. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 378–386, 2006     

Dynamic mechanical behavior of acrylonitrile butadiene rubber/poly(ethylene‐co‐vinyl acetate) blends

The dynamic mechanical behavior of uncrosslinked (thermoplastic) and crosslinked (thermosetting) acrylonitrile butadiene rubber/poly(ethylene‐co‐vinyl acetate) (NBR/EVA) blends was studied with reference to the effect of blend ratio, crosslinking systems, frequency, and temperature. Different crosslinked systems were prepared using peroxide (DCP), sulfur, and mixed crosslink systems. The glass‐transition behavior of the blends was affected by the blend ratio, the nature of crosslinking, and frequency. sThe damping properties of the blends increased with NBR content. The variations in tan δ_max were in accordance with morphology changes in the blends. From tan δ values of peroxide‐cured NBR, EVA, and blends the crosslinking effect of DCP was more predominant in NBR. The morphology of the uncrosslinked blends was examined using scanning electron and optical microscopes. Cocontinuous morphology was observed between 40 and 60 wt % of NBR. The particle size distribution curve of the blends was also drawn. The Arrhenius relationship was used to calculate the activation energy for the glass transition of the blends, and it decreased with an increase in the NBR content. Various theoretical models were used to predict the modulus of the blends. From wide‐angle X‐ray scattering studies, the degree of crystallinity of the blends decreased with an increasing NBR content. The thermal behavior of the uncrosslinked and crosslinked systems of NBR/EVA blends was analyzed using a differential scanning calorimeter. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1556–1570, 2002     

Preparation of microencapsulated ammonium polyphosphate with montmorillonite‐melamine formaldehyde resin and its flame retardancy in EVM

Microencapsulated ammonium polyphosphate (MMT‐MF‐APP) with a montmorillonite‐melamine formaldehyde resin coating layer was successfully prepared by in situ polymerization. The product was characterized by Fourier‐transform infrared, X‐ray photoelectron spectroscopy, and scanning electron microscopy. Water absorption analysis showed that the microencapsulation of APP with the MMT‐MF resin leads to a decrease in the particle's water solubility. The microcapsules also exhibited better mechanical properties and higher flame retardancy in the ethylene–vinyl acetate copolymer with high vinyl acetate content (EVM) rubber compared with the common ammonium polyphosphate. Moreover, thermogravimetric analysis results showed that the EVM composites with MMT‐MF‐APP and dipentaerythritol (DPER) as flame retardants possess higher thermal stability than those with common APP and DPER as flame retardants. Copyright © 2011 John Wiley & Sons, Ltd.     

Water resistance,thermal stability,and flame retardation of polypropylene composites containing a novel ammonium polyphosphate microencapsulated by UV‐curable epoxy acrylate resin

In this work, ammonium polyphosphate (APP) was microencapsulated by UV‐curable epoxy acrylate (EA) resin. The resulting novel EA‐microencapsulated APP (EA‐APP) was characterized by Fourier transform infrared spectra, X‐ray photoelectron spectroscopy, X‐ray diffraction, scanning electron microscopy, granulometry, and thermogravimetric (TG) analysis. EA‐APP was used to flame retard polypropylene (PP). The water solubility of EA‐APP and the water resistance of PP/EA‐APP systems were investigated. The thermal stability and combustion behaviors of PP/EA‐APP composites were studied through TG and cone calorimeter (CC) tests, respectively. The water resistance test showed that the EA shell could significantly improve the water resistance of PP/APP. TG data illustrated that the char residue of EA‐APP greatly increased by 149% compared with uncoated APP, and the thermal stability of PP/EA‐APP composite was improved because of the microencapsulation of APP, with an increment of 248% for the char residue compared with PP/APP. CC test results indicated that the peak value of heat release rate, the total heat release, and the peak of smoke production rate of PP/EA‐APP decreased in comparison with PP/APP. The mechanism for the improvement of flame retardancy in CC test was discussed based on the experimental results. EA resin containing a large number of hydroxyl groups might promote the dehydration reaction in EA‐APP, which facilitated the formation of char residue and the stabilization of APP. Consequently, the flame‐retardant efficiency for APP was improved because of the presence of EA shell. Copyright © 2014 John Wiley & Sons, Ltd.     

Reinforcement of compatibilized NR/NBR blends by fly ash particles and precipitated silica

Effects of precipitated silica (PSi) and silica from fly ash (FA) particles (FASi) on the cure and mechanical properties before and after thermal and oil aging of natural rubber (NR) and acrylonitrile–butadiene rubber (NBR) blends with and without chloroprene rubber (CR) or epoxidized NR (ENR) as a compatibilizer have been reported in this paper. The experimental results suggested that the scorch and cure times decreased with the addition of silica and the compound viscosity increased on increasing the silica content. The mechanical properties for PSi filled NR/NBR vulcanizates were greater than those for FASi filled NR/NBR vulcanizates in all cases. The PSi could be used for reinforcing the NR/NBR vulcanizates while the silica from FA was regarded as a semi‐reinforcing and/or extending filler. The incorporation of CR or ENR enhanced the mechanical properties of the NR/NBR vulcanizates, the ENR being more effective and compatible with the blend. The mechanical properties of the NR/NBR vulcanizates were improved by post‐curing effect from thermal aging but deteriorated by the oil aging. Copyright © 2008 John Wiley & Sons, Ltd.     

Hydroxyapatite as a Potential Nanofiller in Technologically Useful Chlorinated Acrylonitrile Butadiene Rubber

This paper investigates the effect of hydroxyapatite nanoparticles (HA) on the cure characteristics, tensile and tear strength, elongation at break, hardness, abrasion resistance, heat build-up, resilience, glass transition temperature, oil resistance, alternating current (AC) conductivity and transport properties of chlorinated nitrile rubber (Cl-NBR). The maximum and minimum torque values were increased whereas the cure time values were decreased with the HA content in the Cl-NBR. The uniform dispersion of HA in Cl-NBR was obtained from scanning electron microscopy (SEM) and X-ray diffraction (XRD). Differential scanning calorimetry (DSC) showed the increased glass transition temperature of Cl-NBR with the addition of HA particles. Mechanical properties, conductivity and oil resistance of the composites were greatly increased with the loading of hydroxyapatite. Diffusion results were explained in terms of the loading of nanoparticles and size of the penetrant molecules. Arrhenius and thermodynamic parameters for the diffusion process have been estimated and an anomalous diffusion mechanism was observed.     

Preparation of polypropylene/ethylene‐propylene‐diene terpolymer/nitrile rubber ternary thermoplastics vulcanizates with good mechanical properties and oil resistance by core‐shell dynamic vulcanization

As the most successful commercialized thermoplastic vulcanizates (TPVs), polypropylene (PP)/ethylene propylene rubber (EPDM) TPVs exhibit poor oil resistance. In this work, we prepared PP/EPDM/butadiene acrylonitrile rubber (NBR) ternary TPVs with good oil resistance using core‐shell dynamic vulcanization. According to the theoretical analysis of the spreading coefficient and the transmission electron microscopy results, the rubber phases exhibited a special core‐shell structure, in which the cross‐linkedNBR‐core was encapsulated by the EPDM‐shell. The core‐shell structure effectively improved the interfacial compatibility between PP and NBR phase as the EPDM‐shell could avoid the direct contact of them, thus improving the mechanical properties of the TPVs. For example, the PP/EPDM/NBR (40/30/30) ternary TPV showed enhanced tensile strength of 12.57 MPa, compared with 10.71 MPa of PP/EPDM (40/60) TPV and 11.11 MPa of PP/NBR (40/60) TPV, respectively. Moreover, the oil resistance of the TPVs was also improved. Compared with PP/EPDM TPV, the change rates in mass, volume, tensile strength and elongation at break of PP/EPDM/NBR TPV after oil immersion decreased by 42.18%, 48.69%, 52.68% and 28.77%, respectively.     

Thermal characterization of nitrile butadiene rubber (NBR)/PVC blends

Summary Nitrile butadiene rubber (NBR) and NBR/PVC blends were produced using 2,2,4-trimethyl-1,2-dihydroquinoline (TMQ) or not as antioxidant. Controlled ozone degradation was performed in several samples. Thermal, compositional and morphological analysis was performed by means of differential scanning calorimetry, thermogravimetry, chemical analysis and scanning electron microscopy. Thermogravimetry analysis shows four mass loss processes related to plastizicer, complex rubber degradation and metallic oxides and other additives. In NBR (NBR/PVC blends) the onset temperature of the first degradation process varies between 227-231°C (259-262°C) and the apparent activation energy between 26 and 36 kJ mol^-1 (36-57 kJ mol^-1), the NBR/PVC samples non degraded presents the higher thermal stability.     

Thermal properties of compatibilized and filled natural rubber/acrylonitrile butadiene rubber blends

The thermal behaviour of natural rubber/acrylonitrile butadiene rubber (NR/NBR) was studied using thermogravimetry (TG) and differential scanning calorimetry (DSC) in terms of blend ratio, crosslinking systems, fillers and compatibilizer (neoprene) were analyzed. The presence of NBR markedly increases the thermal stability of their blends and it lies in between NR and NBR. DSC studies revealed the thermodynamic immiscibility of the NR/NBR blends by the presence of two distinct glass transition temperatures and the immiscibility was prominent even in the presence of a compatibilizer.     

Novel in situ coordination copper sulfate/ acrylonitrile–butadiene rubber composite

A novel rubber composite of acrylonitrile–butadiene rubber (NBR) filled with anhydrous copper sulfate (CuSO₄) particles was investigated. Dynamic mechanical analysis, differential scanning calorimetry, X‐ray photoelectron spectroscopy, tensile testing, and an equilibrium swelling method were used for the characterization of this novel CuSO₄/NBR composite. The results indicated that the composite had wonderful mechanical properties, which profited from the in situ coordination crosslinking interactions between the nitrile groups (? CN) of NBR and solid CuSO₄ particles. Scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, and transmission electron microscopy results showed that CuSO₄ particles played two roles, acting as both crosslink agents and reinforcing fillers in the matrix. The double actions of CuSO₄ gave the CuSO₄/NBR composites their excellent mechanical properties. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 571–576, 2007     

Thermal degradation behaviors of epoxy resin/POSS hybrids and phosphorus–silicon synergism of flame retardancy

Epoxy resin (EP)/polyhedral oligomeric silsesquioxane (POSS) hybrids were prepared based on octavinyl polyhedral oligomeric silsesquioxane (OVPOSS) and phosphorus‐containing epoxy resin (PCEP). The PCEP was synthesized via the reaction between bisphenol A epoxy resin (DGEBA) and 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO). The structure and morphology of PCEP/OVPOSS hybrids were characterized by Fourier transform infrared spectroscopy and transmission electron microscopy. Differential scanning calorimetry revealed that the PCEP/OVPOSS hybrids possessed higher glass transition temperatures than that of PCEP. The thermal stability of the PCEP/OVPOSS hybrids was studied using thermogravimetric analysis (TGA). The TGA results illustrated the synergistic effect of phosphorus–silicon of flame retardancy: phosphorus promotes the char formation, and silicon protects the char from thermal degradation. The thermal degradation mechanism of the PCEP/OVPOSS hybrids was investigated by real time Fourier transform infrared spectra and pyrolysis/gas chromatogram/mass spectrometry (Py‐GC/MS) analysis. It was found that OVPOSS migrated to the surface of the matrix and then sublimed from the surface in nitrogen; whereas, the vinyl groups of OVPOSS were oxidated to form a radical trap which could react with pyrolysis radicals derived from PCEP to form the branched and crosslinked structure in air. The combustion behaviors of the hybrids were evaluated by micro combustion calorimetry. The addition of OVPOSS obviously decreased the value of peak heat release rate and total heat release of the hybrids. Moreover, scanning electron microscopy (SEM) and X‐ray photoelectron spectroscopy were used to explore the char residues of the PCEP and the hybrids. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 693–705, 2010     

Grafting of methyl methacrylate onto natural rubber in supercritical carbon dioxide

The grafting of the methyl methacrylate (MMA) monomer onto natural rubber (NR) was carried out by supercritical carbon dioxide (scCO₂) swelling polymerization with benzoyl peroxide (BPO) as an initiator. Fourier transform–infrared spectroscopy (FT–IR) was used to confirm the formation of graft copolymers with the characteristic bands of symmetric C?O and C? O? C stretching vibrations at 1728 cm^?1 and 1147 cm^?1, respectively. The effects of the rubber‐to‐monomer ratio, amount of initiator, reaction time, and pressure on the monomer grafting level (GL) and grafting efficiency (GE) were investigated, and the optimum conditions for the preparation of NR‐g‐MMA were found to be 70:30 of the rubber‐to‐monomer ratio, 1.2% of the initiator content, and the reaction pressure of 23 MPa for 6 h. The thermal behavior of the NR and the different NR/MMA molar ratio grafted copolymer samples was studied by differential scanning calorimetry (DSC). The observed glass transition temperature (T_g) was consistent with the GL. The tensile strength, modulus of elasticity, elongation at break, hardness, and oil resistance of graft copolymers were determined and compared with the values of NR and that of polymerization products prepared in traditional toluene solution. The results showed that the tensile strength, modulus of elasticity, hardness and oil resistance were greatly improved after modification in scCO₂. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis,characterization and properties of novel polyamides containing ferrocene unit and flexible spacers

Synthesis and characterization of ferrocene‐containing main‐chain polyamides are reported in this article. A new, interesting type of organometallic monomer (FDADO) based on ferrocene was prepared by interfacial condensation of 1,1′‐dichlorocarbonyl ferrocene with 2 mol 1,8‐diamino‐3,6‐dioxaoctane (DADO). A series of ferrocene‐based polyamides was prepared via polycondensation of the ferrocenyl diamine (FDADO) with different diacid chlorides using two different methods. The monomer and polymers were characterized by elemental analysis, infrared and NMR spectroscopy. The thermal stability and behavior of the synthesized polymers were evaluated by thermal gravimetric analysis (TGA), dynamic mechanical thermal analysis (DMTA), and differential scanning calorimetry (DSC). The crystallinity of polymers was examined by X‐ray diffraction analysis. Inherent viscosity, solubility and flame‐retardancy of the polymers were also studied. The obtained polymers showed good heat‐resistance and flame‐retardancy, and improved solubility vs generally reported polyamides in some common organic solvents. Copyright © 2007 John Wiley & Sons, Ltd.