Wound Healing Attributes of Polyelectrolyte Multilayers Prepared with Multi‐l‐arginyl‐poly‐l‐aspartate Pairing with Hyaluronic Acid and γ‐Polyglutamic Acid

Biodegradable multi‐l ‐arginyl‐poly‐l ‐aspartate (MAPA), more commonly cyanophycin, prepared with recombinant Escherichia coli contains a polyaspartate backbone with lysine and arginine as side chains. Two assemblies of polyelectrolyte multilayers (PEMs) are fabricated at three different concentration ratios of insoluble MAPA (iMAPA) with hyaluronic acid (iMAPA/HA) and with γ‐polyglutamic acid (iMAPA/γ‐PGA), respectively, utilizing a layer‐by‐layer approach. Both films with iMAPA and its counterpart, HA or γ‐PGA, as the terminal layer are prepared to assess the effect on film roughness, cell growth, and cell migration. iMAPA incorporation is higher for a higher concentration of the anionic polymer due to better charge interaction. The iMAPA/HA films when compared to iMAPA/γ‐PGA multilayers show least roughness. The growth rates of L929 fibroblast cells on the PEMs are similar to those on glass substrate, with no supplementary effect of the terminal layer. However, the migration rates of L929 cells increase for all PEMs. γ‐PGA incorporated films impart 50% enhancement to the cell migration after 12 h of culture as compared to the untreated glass, and the smooth films containing HA display a maximum 82% improvement. The results present the use of iMAPA to construct a new layer‐by‐layer system of polyelectrolyte biopolymers with a potential application in wound dressing.     

On the “Wolfsberg–Helmholz Conjecture” of “Extended‐Hückel Theory”

After having reviewed some pioneer integral approximations closely related to Rüdenberg's expansions of one‐ and two‐electron orbital products, we apply the previously described “Implicit Multi‐Center Integration” techniques on Roothaan's “restricted” Fock‐matrix components over standard atomic orbital bases. The resulting compact forms are very similar to the well‐known “Wolfsberg–Helmholz Conjecture” of “Extended‐Hückel Theory,” which relates the various off‐diagonal matrix elements of “restricted” Fock‐type to their corresponding diagonal counterparts. In this way, a “nonempirical Extended‐Hückel Theory” can be created. © 2012 Wiley Periodicals, Inc.     

Statistical interpretation of the Amerithrax “morph” assay results

In the Amerithrax investigation PCR‐based “morph assays” were used to link the anthrax letters with the RMR‐1029 flask at USAMRIID. Quantitative data reported for several of these assays are not consistent with Poisson sampling statistics, but instead exhibit “Taylor's Law” behavior where the variance greatly exceeds the mean. A plausible statistical model for this behavior can explain the large number of observed negative and “inconclusive” findings, and implies a high likelihood that a repository sample could contain a “morph” mutant at concentrations well above the nominal detection limit but nonetheless give a negative or inconclusive test result. A Bayesian framework relates the assay results to the probability that a sample actually contains all four morph mutants, even though it tested negative for at least one. The analysis implies that the observed false negative rate actually does not significantly weaken the conclusion that the morph assays correctly excluded all but the stocks derived from RMR‐1029 as possible sources of the letter powders, at least when the test results were unambiguous. These findings expand upon and resolve some of the issues cited in recent reviews, and indicate the importance of developing a rigorous statistical framework for interpreting “morph” assay data.     

A “self‐pinning” adhesive based on responsive surface wrinkles

Surface wrinkles are interesting since they form spontaneously into well‐defined patterns. The mechanism of formation is well‐studied and is associated with the development of a critical compressive stress that induces the elastic instability. In this work, we demonstrate surface wrinkles that dynamically change in response to a stimulus can improve interfacial adhesion with a hydrogel surface through the dynamic evolution of the wrinkle morphology. We observe that this control is related to the local pinning of the crack separation pathway facilitated by the surface wrinkles during debonding, which is dependent on the contact time with the hydrogel. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Ab initio calculation of the Young's modulus of α‐polyamides

In earlier works the supermolecule model has been applied to the calculation of the Young's modulus of crystalline polyethylene and polyamide‐6. In the supermolecule model a crystalline polymer is represented as a single finite chain divided into a head, body, and tail part. The body contains a number of monomer units and is representative for a polymer chain. In this article, this model has been used to study the geometric properties and the elastic moduli of the α form of other polyamides: polyamide‐2 (or polyglycine), polyamide‐3, polyamide‐4, polyamide‐11, and polyamide‐6,6. All calculations have been performed with a linearly constrained body. The results have been compared to other theoretical and experimental results if available. © 2002 Wiley Periodicals, Inc.; DOI 10.1002/qua.2002;10121     

Layer‐by‐layer Assembled Multilayers of Graphene/Mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin for Detection of Dopamine

Graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin multilayer films composed of graphene sheet (GS) and mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were fabricated easily by two steps. First, negatively charged graphene oxide (GO) and positively charged mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were layer‐by‐layer (LBL) self‐assembled on glassy carbon electrode (GCE) modified with a layer of poly(diallyldimethylammonium chloride) (PDDA). Then graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GS/NH₂‐β‐CD) multilayer films were built up by electrochemical reduction of graphene oxide/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GO/NH₂‐β‐CD). Combining the high surface area of GS and the active recognition sites on β‐cyclodextrin (β‐CD), the GS/NH₂‐β‐CD multilayer films show excellent electrochemical sensing performance for the detection of DA with an extraordinary broad linear range from 2.53 to 980.05 µmol·L^?1. This study offers a simple route to the controllable formation of graphene‐based electrochemical sensor for the detection of DA.     

Synthesis and Assembly of Dipolar Heterostructured Tetrapods: Colloidal Polymers with “Giant tert‐butyl” Groups

We report on the first synthesis of a heterostructured semiconductor tetrapod from CdSe@CdS that carries a single dipolar nanoparticle tip from a core–shell colloid of Au@Co. A four‐step colloidal total synthesis was developed, where the key step in the synthesis was the selective deposition of a single AuNP tip onto a CdSe@CdS tetrapod under UV‐irradiation. Synthetic accessibility to this dipolar heterostructured tetrapod enabled the use of these as colloidal monomers to form colloidal polymers that carry the semiconductor tetrapod as a side chain group attached to the CoNP colloidal polymer main chain. The current report details a number of novel discoveries on the selective synthesis of an asymmetric heterostructured tetrapod that is capable of 1D dipolar assembly into colloidal polymers that carry tetrapods as side chain groups that mimic “giant tert‐butyl groups”.     

The Origin of the “Snap‐In” in the Force Curve between AFM Probe and the Water/Gas Interface of Nanobubbles

The long‐range attractive force or “snap‐in” is an important phenomenon usually occurring when a solid particle interacts with a water/gas interface. By using PeakForce quantitative nanomechanics the origin of snap‐in in the force curve between the atomic force microscopy (AFM) probe and the water/gas interface of nanobubbles has been investigated. The snap‐in frequently happened when the probe was preserved for a certain time or after being used for imaging solid surfaces under atmospheric conditions. In contrast, imaging in liquids rarely induced a snap‐in. After a series of control experiments, it was found that the snap‐in can be attributed to hydrophobic interactions between the water/gas interface and the AFM probe, which was either modified or contaminated with hydrophobic material. The hydrophobic contamination could be efficiently removed by a conventional plasma‐cleaning treatment, which prevents the occurring of the snap‐in. In addition, the adsorption of sodium dodecyl sulfate onto the nanobubble surface changed the water/gas interface into hydrophilic, which also eliminated the snap‐in phenomenon.     

An Isoindigo‐Based “Double‐Cable” Conjugated Polymer for Single‐ Component Polymer Solar Cells

An isoindigo‐based “double‐cable” conjugated polymer bearing perylene bisimide side units was developed via Stille polymerization for application in single‐component polymer solar cells, in which a power conversion efficiency of 1% with broad photo‐response from 300 nm to 800 nm was achieved. There is no evidence of large phase separation confirmed by AFM images and photoluminescence (PL) spectra. The space charge limit current measurements and light intensity dependence measurements indicate that the low electron mobility and the significant recombination of photogenerated charge carriers in active layer mainly account for the low performance of our solar cells. Our results suggest that these “double‐cable” are promising candidates for use in single‐component polymer solar cells with NIR photoresponse.     

Hyaluronic Acid/Poly(β‐Amino Ester) Polymer Nanogels for Cancer‐Cell‐Specific NIR Fluorescence Switch

Cancer‐cell‐specific pH‐activatable polymer nanogels consisting of CD44‐receptor‐targeting hyaluronic acid (HA), pH‐sensitive poly(β‐amino ester) (PBAE), and near‐infrared (NIR) fluorescent indocyanine green (ICG) were synthesized and used to detect cancer cells. The HA/PBAE/ICG‐polymer‐nanogel‐based NIR probe was nonfluorescent outside of tumor cells. After internalization by CD44‐receptor‐mediated endocytosis, the probe accumulated in the late endosomes or lysosomes where the acidic pH solubilized the PBAE and caused instant disassembly of the polymer nanogel. During endosomal maturation, the encapsulated ICG was released from its quenched state, inducing strong NIR fluorescence recovery. The nanogels generate a highly tumor‐specific NIR signal with a reduced background signal.     

A Constrained Disorder Refinement: “Reinvestigation of “Single‐Crystal X‐ray Structure of 1,3‐Dimethylcyclobutadiene” by M. Shatruk and I. V. Alabugin”

Shatruk and Alabugin propose an alternative structural model for the observed electron density that we have attributed to the photochemical formation of 1,3‐dimethylcyclobutadiene in a protective solid crystalline matrix. The main criticism from Shatruk and Alabugin concerns the modeling of the disorder in the calixarene cavity and in particular the neglect of a residual electron density close to the O1 atom. We published (Chem. Eur. J. 2011 , 17, 10021) our opinion concerning this “ignored peak” in the Supporting Information of the paper. The current response to the Correspondence demonstrates that Shatruk and Alabugin have over‐modeled our data by assigning a small electron density peak, which is hardly more than the density corresponding to a hydrogen atom, to an under‐occupied oxygen site, using inappropriate refinement contraints.     

Synthesis of graft copolymers with “V‐shaped” and “Y‐shaped” side chains via controlled radical and anionic polymerizations

A combination of nitroxide‐mediated radical polymerization and living anionic polymerization was used to synthesize a series of well‐defined graft (co)polymers with “V‐shaped” and “Y‐shaped” branches. The polymer main chain is a copolymer of styrene and p‐chloromethylstyrene (PS‐co‐PCMS) prepared via nitroxide‐mediated radical polymerization. The V‐shaped branches were prepared through coupling reaction of polystyrene macromonomer, carrying 1,1‐diphenylethylene terminus, with polystyryllithium or polyisoprenyllithium. The Y‐shaped branches were prepared throughfurther polymerization initiated by the V‐shaped anions. The obtained branches, carrying a living anion at the middle (V‐shaped) or at the end of the third segment (Y‐shaped), were coupled in situ with pendent benzyl chloride of PS‐co‐PCMS to form the target graft (co)polymers. The purified graft (co)polymers were analyzed by size exclusion chromatography equipped with a multiangle light scattering detector and a viscometer. The result shows that the viscosities and radii of gyration of the branched polymers are remarkably smaller than those of linear polystyrene. In addition, V‐shaped product adopts a more compact conformation in dilute solution than the Y‐shaped analogy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4013–4025, 2007