镥单酞菁和镥双酞菁电子转移过程的研究

本文用循环伏安法研究镥单酞菁和镥双酞菁在非水溶剂中的电化学行为,获得了相应的氧化还原反应半波电位E1/2,测定了其中四个氧化还原反应的电子转移速度常数ks。指出非水溶剂对镥单酞菁和镥双酞菁的电化学行为具有程度不同的影响。     

电解质水溶液在丙酸十二铵-四氯化碳溶液中的增溶

表面活性剂在非极性溶剂中形成的反胶束在催化反应、光化学、蛋白质苹取分离等方面有着广泛的应用问．这些应用与反胶束的性质有着密切的关系，而增溶水后的反胶束其形状和大小都会发生很大的变化．增溶不同水量的反胶束的微极性、酸碱性、微勤度等已有不少文献报导［2－5］．一些不溶于非极性溶剂而溶于水的物质可以溶解在非极性溶剂中的反胶束核心水团中，这个现象被称为二次增溶．其中，电解质的二次增溶对于研究配体转换反应。酶催化反应问及改变反胶束内部的微环境有着十分重要的作用，Aebi和Weibush回首先研究了有水存在时N。CI在A…     

水对胆绿素在二甲基甲酰胺中电化学氧化反应的影响

本文采用现场时间分辨光谱电化学技术结合循环伏安电化学方法对胆绿素(BV)在纯二甲基甲酰胺(DMF)和DMF-H~2O混合溶剂中的电化学氧化反应进行了较为系统的研究, 并提出了相应的反应机理。实验中发现, 在有机溶剂DMF中引入水不但促进了BV氧化反应的进行, 而且还使BV的氧化反应由在DMF中的ECEC历程转变为ECCECC反应过程。     

化学方法分离同位素的新进展

传统的分离同位素方法冗长而昂贵。最近美国依利诺伊斯州立大学化学家G.R.Stevenson和R.C.Reiter发展了一种可大幅度降低生产成本的分离同位素的新方法,即利用电化学作用或活泼金属的还原作用,在非水溶剂中将含有待分离同位素的化合物进行不完全的还原,使一部分分子成为阴离子。由于含有质量不同的同位素     

非水溶剂Li-O_2电池锂负极研究进展（英文）

非水溶剂Li-O_2电池因其高的理论能量密度,近年来备受关注。非水溶剂Li-O_2电池的典型结构为金属锂负极、含Li+的非水溶剂电解液和多孔氧气正极。目前,多数Li-O_2电池研究集中在正极的氧气电极反应;金属锂负极极强的还原性导致的副反应使Li-O_2电池中的化学和电化学反应变得更为复杂。因为,电解液和从正极扩散来的O_2都会与金属锂发生反应;锂负极上生成的副反应产物同样会扩散到正极一侧,干扰正极的O_2反应。此外,锂负极上可能生成锂枝晶,降低电池的安全性能,进而阻碍Li-O_2电池的实用化。因此,研究并解决锂负极的电化学稳定性和安全问题迫在眉睫。本文综述了近年来国内外在非水溶剂Li-O_2电池锂负极保护和修饰方面的最新研究进展,包括:可替代的对/参比电极的选择、电解液和添加剂、复合保护层与隔膜的研究、先进实验技术的开发与应用、并针对未来非水溶剂Li-O_2电池的发展进行了展望。     

锕系元素在熔盐体系中的电化学及萃取特性研究进展

熔融盐是一类非水溶剂,分为高温熔盐、室温熔盐和低温熔盐。 作为反应介质和电解介质,因其优良性能,可以溶解很多难溶于水的活泼金属。 近年来,该领域的研究热点是将熔盐作为干法后处理的电解质分离和回收锕系元素。 本文综述了锕系元素在高温熔盐中的电化学行为、热力学等物理特性,介绍了近几年室温离子液体(RTILs)的研究进展及锕系元素在RTILs中萃取特性的最新研究成果,展望了熔盐体系未来的研究方向。     

两种甲氧基苯基咔咯铜配合物的合成及光谱性质

合成了两个中位苯基上具有甲氧基取代基的铜咔咯配合物(Tp-OCH3PC)Cu和(To,p-(OCH3)2PC)Cu,通过紫外-可见、红外光谱、元素分析、核磁共振及质谱对它们进行了表征。研究了配合物在非水溶剂中的电子顺磁共振、电化学和光谱电化学性质,结果表明无论在固体状态还是在非水溶剂中,配合物的中心金属离子均为三价铜Cu(Ⅲ),在给定的溶剂中Cu(Ⅲ)可以发生可逆的还原反应生成Cu(Ⅱ),也可以被可逆氧化为Cu(Ⅲ)的阳离子自由基。探讨了甲氧基取代基以及溶剂对配合物的紫外-可见光谱和氧化还原电位的影响。     

溶剂对聚酰亚胺电化学行为的影响

运用电化学循环伏安等方法研究了有机溶剂对可溶性聚酰亚胺(PI)电化学行为的影响.结果表明,PI在一些溶剂中能进行电化学反应.红外光谱研究表明溶剂对PI电化学行为的影响主要取决于不同结构的溶剂与PI之间的相互作用.     

红外光谱电化学研究金电极表面上CO2的还原

以碳酸丙烯酯(PrC)为溶剂,高氯酸四丁基胺(TBAP)为电解质,利用电化学及红外光谱电化学开展了金电极上二氧化碳的还原研究。运用现场红外光谱跟踪电化学还原过程反应物及产物的生成和消失。红外光谱电化学循环伏吸法表明,在消耗CO2的同时,金电极上有CO的产生,且伴随有碳酸根的形成。结合电化学和光谱电化学结果,提出了一种电还原机理:在非水介质中,CO2电还原过程中生成了中间体CO2.-,随后CO2.-分别以两个途径进行还原,其一是直接被还原成CO,其二是与CO2结合生成C2O4.-而后歧化成CO以及CO32-。两个反应同时进行,且第一个反应是可逆过程。     

非水毛细管电泳及其在电中性和手性化合物分离上的应用

讨论了非水毛细管电泳(NACE)的优势和缺点,分别评价了常用非水溶剂作为运行介质的潜力,非水介质中电渗流的产生原因与控制机理.对于 NACE 的分离机理,尤其是静电相互作用与疏溶剂相互作用对分离的影响进行了讨论.着重评述了 NACE 在电中性物质的分离以及离子对手性拆分方面的应用及其机制.     

Optimal synthesis of heat exchanger network for thermochemical S-I cycle

In this paper, a brief survey of hydrogen production methods is presented with a focus on S-I cycle. Based on heat duty data of sulfuric acid decomposition in S-I cycle, optimization models are developed to explore the minimum utility consumption and the minimum number of heat exchangers. Finally an optimal heat exchanger network for S-I thermochemical cycle is defined by a mixed integer optimization model.     

Control of Chemical Reactions by Using Molecules that Buffer Non-aqueous Solutions

Control of chemical reactions is necessary to obtain designer chemical transformation products and for preventing decomposition and isomerization reactions of compounds of interest. For the control of chemical events in aqueous solutions, the use of aqueous buffers is a common practice. However, no molecules that buffer non-aqueous solutions were commonly used. Herein, we demonstrate that 1,3-cyclohexanedione derivatives have buffering functions in non-aqueous solutions. It was also shown that these molecules can be utilized to alter and control chemical reactions. 1,3-Cyclohexanedione derivatives inhibited both acid- and base-catalyzed isomerizations and decompositions in organic solvents. The reaction products obtained in the presence of the buffering molecule 2-methyl-1,3-cyclohexanedione differed from those obtained in the absence of the buffering molecule. The use of buffering molecules that work in organic solvents provides a strategy to control chemical reactions and expands the range of compounds that can be synthesized.     

DIRECT SYNTHESIS OF COPPER DIMETHYLDITHIOCARBAMATE DERIVATIVES: AN OPTIMIZATION USING ULTRASONIC TREATMENT

Abstract

A comparison of the synthetic approaches for copper dimethyldithiocarbamate complexes by oxidative and electrochemical dissolution of metallic copper in different non-aqueous solvents is reported. The influence of ultrasound on the synthesized products and on the reaction yields is also studied. The results show the influence of solvent on the structure and on the increase in rate of metal dissolution from simultaneous ultrasonic treatment.     

Non-aqueous capillary electrophoresis

The benefits of non-aqueous capillary electrophoresis have been described in a number of recent publications. The wide selection of organic solvents, with their very different physicochemical properties, broadens our scope to manipulate separation selectivity. The lower currents present in non-aqueous solvents allow the use of high electric field strengths and wide bore capillaries, the latter in turn allowing larger sample load. In many cases detection sensitivity can also be enhanced. The potential of non-aqueous capillary electrophoresis is discussed throughout the paper, and the feasibility of capillary electrophoresis under non-aqueous media is demonstrated with reference to several applications.     

Electrochemical behaviour of triphenylgermanium bromide

The electrochemical behaviour of triphenylgermanium bromide has been thoroughly investigated using various electrochemical techniques including polarography, cyclic voltammetry and controlled potential coulometry. It has been found that in non-aqueous solvents triphenylgermanium bromide gives only one small drawn-out wave, while in aqueous-organic media two reduction waves are observed. The first wave has been ascribed to adsorption of the products of the reduction step II. The triphenylgermanium free radicals have been postulated to combine rapidly with protons in acidic media or to abstract hydrogen from water in alkaline media. The protonated species has been found to be reduced at potentials at which normal reduction of triphenylgermanium bromide takes place giving rise to a superimposed catalytic proton-discharge wave. A mechanism of reduction of triphneylgermanium bromide at the DME has been postulated and analytical methods for the determination of triphenylgermanium compounds at the formulation and trace analysis levels have been developed.     

Solvent Effect on the Chemiluminescence of Acridinium Thioester: A Computational Study

Chemiluminescent labelling, which is one of the promising procedures of modern immunodiagnostics, is increasingly carried out using acridinium derivatives, an oxidant, and an alkaline aqueous environment. However, the efficiency of the chemiluminescence of luminol or acridinium esters is higher in non-aqueous solvents such as dimethyl sulfoxide or acetonitrile. Therefore, the search for a new environment for the chemiluminescence reaction, especially the one characterized by a higher quantum yield of chemiluminescence, is one of the aims of current research. Using computational methods (DFT and TD DFT with PCM model of solvent), we examined thermodynamic and kinetic data concerning the chemiluminescence and competitive dark pathways. Our results suggest that better characteristics of the chemiluminescence reaction of acridinium thioester are observed in nonpolar solvents, such as methylcyclohexane, n-hexane and n-pentane, than in aqueous media used so far. Further experimental verification is necessary to confirm the possible application of proposed nonpolar solvents in chemiluminescent labelling and hence in immunodiagnostics.     

Non-aqueous capillary electrophoresis using non-dissociating solvents. Application to the separation of highly hydrophobic oligomers

The application of non-aqueous capillary electrophoresis for the separation of very hydrophobic oligomers has been studied. N-Phenylaniline oligomers having degrees of polymerisation (n) of 2, 4, 6, and 8 were taken as model compounds. Capillary electrophoresis could be performed using a mixture of non-aqueous solvents with a high percentage of solvents with a low dielectric constant. These solvents, such as tetrahydrofuran (THF), chloroform or dichloromethane, are needed to solubilise the hydrophobic solutes in the electrolyte. The composition of the solvent mixture and the nature of the acid added to the electrolyte, which is needed to obtain electrophoretic motion of the N-phenylaniline oligomers, are discussed in detail. Next, other parameters such as ionic strength, injection time, electric field, and temperature were investigated too and their influence on the separation is discussed as well. The existence of a reversed (anodic) electroosmotic flow in a fused-silica capillary containing a THF-methanol mixture under acidic conditions is reported.     

The effect of water on separations in non-aqueous capillary electrophoresis systems

Summary Water, in concentrations up to 10%, has been added to organic solvents (dimethylsulphoxide,N-methylformamide, acetonitrile and methanol) used as the buffer solvents in electrophoresis media for non-aqueous capillary electrophoresis. Anionic and cationic test substances have been used to study the effect on separation selectivity and efficiency. The effect on the electroosmotic flow has also been studied. Water added in concentrations up to 0.5% had only a minor effect on the separation selectivity, efficiency or electroosmotic flow in the systems studied. These results indicate that small variations in the water-content of organic solvents are of only minor importance to the reproducibility of non-aqueous capillary electrophoresis systems. The reproducibility of selectivity might, however, be slightly improved by adding 0.1–0.5% water, because true non-aqueous solvents are likely to cause problems as a result of the variable absorption of water.     

空气在二甲基硅油和液压油中的溶解度

对于诸多工程运用场合, 获得空气在硅油以及液压油中溶解度可靠的数据至关重要. 针对已有测量装置及方法的不足, 建立了一种基于理想气体状态方程来确定气体溶解量的新型精密活塞式装置. 获得了温度为293.2及353.2 K, 压力在0-350 kPa范围内, 空气在500cSt 二甲基硅油中的本生溶解度表达式. 测量了298.2 K时20cSt二甲基硅油及国产32#抗磨液压油在多种气相压力下的本生溶解度. 精度及可靠性分析表明实验数据的误差范围为6%. 本生溶解度与气相压力呈较好的线性关系, 以摩尔分数表示的溶解度与压力呈非线性关系, 但可用Krichevsky-Ilinskaya方程拟合. 发现空气在相对分子质量差异很大的两种二甲基硅油中的本生溶解度很接近, 由此提出, 对于小分子的非极性溶质在聚合物溶剂中的溶解度, 用聚合物单体的摩尔数而不是聚合物分子摩尔数来表示摩尔浓度更有利于实验数据的外推和工程应用. 对于相对分子质量差别较大或无法确定相对分子质量的溶剂, 工程应用中适宜采用本生溶解度.