Trifluoroacetylacetonate rhodium(III) methyl complexes, cis-[Rh(TFA)(PPh3)2(CH3)(L)][BPh4] and cis-[Rh(TFA)(PPh3)2(CH3)(I)] (L = CH3CN, NH3, pyridine), in comparison with their acetylacetonate analogs

The oxidative addition of CH₃I to planar rhodium(I) complex [Rh(TFA)(PPh₃)₂] in acetonitrile (TFA is trifluoroacetylacetonate) leads to the formation of cationic, cis-[Rh(TFA)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] (1), or neutral, cis-[Rh(TFA)(PPh₃)₂(CH₃)(I)] (4), rhodium(III) methyl complexes depending on the reaction conditions. 1 reacts readily with NH₃ and pyridine to form cationic complexes, cis-[Rh(TFA)(PPh₃)₂(CH₃)(NH₃)][BPh₄] (2) and cis-[Rh(TFA)(PPh₃)₂(CH₃)(Py)][BPh₄] (3), respectively. Acetylacetonate methyl complex of rhodium(III), cis-[Rh(Acac)(PPh₃)₂(CH₃)(I)] (5), was obtained by the action of NaI on cis-[Rh(Acac)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] in acetone at −15 °C. Complexes 1-5 were characterized by elemental analysis, ³¹P{¹H}, ¹H and ¹⁹F NMR. For complexes 2, 3, 4 conductivity data in acetone solutions are reported. The crystal structures of 2 and 3 were determined. NMR parameters of 1-5 and related complexes are discussed from the viewpoint of their isomerism.     

Formation and structural characterization of novel polynuclear palladium selenolato complexes [Pd3Se(SePh)3(PPh3)3]Cl and [Pd6Cl2Se4(SePh)2(PPh3)6]

In addition to well-known dinuclear phenylselenolato palladium complexes, the reaction of [PdCl₂(PPh₃)₂] and NaSePh affords small amounts of novel trinuclear and hexanuclear complexes [Pd₃Se(SePh)₃(PPh₃)₃]Cl (1) and [Pd₆Cl₂Se₄(SePh)₂(PPh₃)₆] (2). Complex 1 is triclinic, P1?, a=13.6310(2), b=16.2596(2), c=16.9899(3) Å, α=83.1738(5), β=78.9882(5), γ=78.7635(5)°. Complex 2 is monoclinic, C2/c, a=25.7165(9), b=17.6426(8), c=27.9151(14) Å, β=110.513(2)°. There are no structural forerunners for 1, but the hexanuclear complex 2 is isostructural with [Pd₆Cl₂Te₄(TeR)₂(PPh₃)₆] (R=Ph, C₄H₃S) that have been observed as one of the products in the oxidative addition of R₂Te₂ to [Pd(PPh₃)₄]. Mononuclear palladium complexes may play a significant role as building blocks in the formation of the polynuclear complexes.     

Reactions of the dichloroboryl complex of osmium, Os(BCl2)Cl(CO)(PPh3)2, with water, alcohols, and amines: Crystal structures of Os[B(OH)2]Cl(CO)(PPh3)2, Os[B(OEt)2]Cl(CO)(PPh3)2, and

A high-yield synthesis of trans-RuCl₂(CS)(H₂O)(PPh₃)₂ from RuCl₂(PPh₃)₃ and CS₂ is described. The coordinated water molecule is labile, and introduction of CNR (R  p-toyl or p-chlorophenyl) leads to yellow trans-RuCl₂(CS)(CNR)(PPh₃)₂, which isomerises thermally to colourless cis-RuCl₂(CS)(CNR)(PPh₃)₂. Reaction of AgClO₄ with cis-RuCl₂(CS)(CNR)(PPh₃)₂ gives [RuCl(CS)(CNR)(H₂O)(PPh₃)₂]⁺, from which [RuCl(CS)(CO)(CNR)(PPh₃)₂]⁺ and [RuCl(CS)(CNR)₂(PPh₃)₂]⁺ are derived. Reaction of trans-RuCl₂(CS)(H₂O)(PPh₃)₂ with sodium formate gives Ru(η²-O₂CH)Cl(CS)(PPh₃)₂, which undergoes decarboxylation in the presence of (PPh₃) to give RuHCl(CS)(PPh₃)₃. Ru(η²-O₂CH)H(CS)(PPh₃)₂ and Ru(η²-O₂CMe)-H(CS)(PPh₃)₂ are also described.     

Thiocarbonyl complexes of ruthenium(II). Synthesis of RuCl2(CS)(H2O)(PPh3)2 and RuHCl(CS)(PPh3)3

A high-yield synthesis of trans-RuCl₂(CS)(H₂O)(PPh₃)₂ from RuCl₂(PPh₃)₃ and CS₂ is described. The coordinated water molecule is labile, and introduction of CNR (R  p-toyl or p-chlorophenyl) leads to yellow trans-RuCl₂(CS)(CNR)(PPh₃)₂, which isomerises thermally to colourless cis-RuCl₂(CS)(CNR)(PPh₃)₂. Reaction of AgClO₄ with cis-RuCl₂(CS)(CNR)(PPh₃)₂ gives [RuCl(CS)(CNR)(H₂O)(PPh₃)₂]⁺, from which [RuCl(CS)(CO)(CNR)(PPh₃)₂]⁺ and [RuCl(CS)(CNR)₂(PPh₃)₂]⁺ are derived. Reaction of trans-RuCl₂(CS)(H₂O)(PPh₃)₂ with sodium formate gives Ru(η²-O₂CH)Cl(CS)(PPh₃)₂, which undergoes decarboxylation in the presence of (PPh₃) to give RuHCl(CS)(PPh₃)₃. Ru(η²-O₂CH)H(CS)(PPh₃)₂ and Ru(η²-O₂CMe)-H(CS)(PPh₃)₂ are also described.     

Syntheses and crystal structures of linear coordinated complexes of Ag with the ligands C(PPh3)2 and (HC{PPh3}2)

The cationic complexes [({Ph₃P}₂C)Ag(C{PPh₃}₂)]X (2⁺, X = Cl, BF₄) with a linear arrangement of the ligands were obtained from the reaction of C(PPh₃)₂ (1) with the appropriate AgX in THF. The ³¹P NMR spectrum of the cation 2⁺ exhibits a doublet with J(Ag,P) = 15.3 Hz. The cation was also formed when the adduct O₂C ← 1 was allowed to react with AgX in CH₂Cl₂ in the first step as shown by ³¹P NMR; however, deprotonation of the solvent finally produced the cation (HC{PPh₃}₂)⁺, (H1)⁺ quantitatively. In the absence of coordinating anions, the tricationic complex [({Ph₃P}₂CH)Ag(CH{PPh₃}₂)](BF₄)₃ (3), containing the cation (H1)⁺ as ligand, could be isolated by reacting AgBF₄ with the salt (H1)(BF₄). All compounds were characterized by IR and ³¹P NMR spectroscopy; the structures of the compounds [2]Cl·1.25THF, 3·5CH₂Cl₂, 3·4C₂H₄Cl₂, and (H1)(BF₄) could be established by X-ray analyses.     

Synthesis and characterization of the bimetallic gold-iridium compoundscis-[IrH(AuPPh3)(dppe)2]PF6 andmer-[IrH(AuPPh3)(CO)(PPh3)3]PF6

Summary The bimetallic complexes [IrH(AuPPh₃)(dppe)₂]X(X=Cl, BPh₄, PF₆ or BF₄) and [IrH(AuPPh₃)(CO)(PPh₃)₃] PF₆ have been synthesized from the corresponding neutral iridium phosphine hydrides and [AuCl(PPh₃)]. The molecular structure of the latter compounds, determined by single-crystal x-ray crystallography, consists of an octahedrally co-ordinated iridium atom and an almost linear P–Au–Ir–P arrangement. The Au–Ir distance is 2.6628(4) Å. The position of the hydride ligand was located in the x-ray structural analysis and istrans to the carbonyl group, which is consistent with the i.r. and n.m.r. spectral data.     

Binuclear ruthenium complexes of fluorous phosphine ligands: Synthesis, properties, and biphasic catalytic activity. Crystal structure of [Ru(μ-O2CMe)(CO)2P(CH2CH2(CF2)5CF3)3]2

The fluorocarbon soluble, binuclear ruthenium(I) complexes [Ru(μ-O₂CMe)(CO)₂L^F]₂, where L^F is the perfluoroalkyl substituted tertiary phosphine, P(C₆H₄-4-CH₂CH₂(CF₂)₇CF₃)₃, or P(CH₂CH₂(CF₂)₅CF₃)₃, were synthesized and partition coefficients for the complexes in fluorocarbon/hydrocarbon biphases were determined. Catalytic hydrogenation of acetophenone to 1-phenylethanol in benzotrifluoride at 105 °C occured in the presence of either [Ru(μ-O₂CMe)(CO)₂P(C₆H₄-4-CH₂CH₂(CF₂)₇CF₃)₃]₂ (1) or [Ru(μ-O₂CMe)(CO)₂P(CH₂CH₂(CF₂)₅CF₃)₃]₂ (2). The X-ray crystal structure of [Ru(μ-O₂CMe)(CO)₂P(CH₂CH₂(CF₂)₅CF₃)₃]₂ was determined. The compound exhibited discrete regions of fluorous and non-fluorous packing.     

Chelate structures of 5-(H/Br)-2-hydroxybenzaldehyde-4-allyl-thiosemicarbazones (H2L): Synthesis and structural characterizations of [Ni(L)(PPh3)] and [Ru(HL)2(PPh3)2]

The reactions of 5-R-2-hydroxybenzaldehyde-4-allyl-thiosemicarbazone {R: H (L¹); Br (L²)} with [M^II(PPh₃)nCl₂] (M = Ni, n = 2 and M = Ru, n = 3) in a 1:1 molar ratio have given stable solid complexes corresponding to the general formula [Ni(L)(PPh₃)] and [Ru(HL)₂(PPh₃)₂]. While the 1:1 nickel complexes are formed from an ONS donor set of the thiosemicarbazone and the P atom of triphenylphosphine in a square planar structure, the 1:2 ruthenium complexes consist of a couple from each of N, S and P donor atoms in a distorted octahedral geometry. These mixed-ligand complexes have been characterized by elemental analysis, IR, UV–Vis, APCI-MS, ¹H and ³¹P NMR spectroscopies. The structures of [Ni(L²)(PPh₃)] (II) and [Ru(L¹H)₂(PPh₃)₂] (III) were determined by single crystal X-ray diffraction.     

Carbyne-fluoro complexes of rhenium. Single-pot synthesis of trans-[ReF(CCH2R)-(Ph2PCH2CH2PPh2)2][BF4]

Treatment of a THF solution of trans-[ReCl(N₂)(dppe)₂] (dppe = Ph₂PCH₂CH₂PPh₂) with a 1-alkyne HCCR (R =^tBu, CO₂Me, CO₂Et, or C₆H₄Me-4), in the presence of Tl[BF₄]/[NH₄][BF₄], under sunlight, affords the corresponding carbyne-fluoro complexes trans-[ReF(CCH₂R)(dppe)₂][BF₄] in an unprecedented single-pot synthesis. Further reaction with [BU₄N]OH leads to the vinylidenefluoro compounds trans-[ReF(=C=CHR)(dppe)₂] (R = CO₂Me, CO₂Et, or C₆H₄Me-4).     

Synthesis of [Ru(CO)2(PPh3)(SP)] and [Ru(CO)(PPh3)2(SP)] and their catalytic activities for the hydroamination of phenylacetylene

The reaction of [Ru(CO)₂(PPh₃)₃] (1) with o-styryldiphenylphophine (SP) (2) gave [Ru(CO)₂(PPh₃)(SP)] (3) in 83% yield. This styrylphosphine ruthenium complex 3 can also be synthesized by the reaction of [Ru(p-MeOC₆H₄NN)(CO)₂(PPh₃)₂]BF₄ (4) with NaBH₄ and 2 in 50% yield. When “Ru(CO)(PPh₃)₃” generated by the reaction of [RuH₂(CO)(PPh₃)₃] (8) with trimethylvinylsilane reacted with 2, [Ru(CO)(PPh₃)₂(SP)] (10) was produced in moderate yield as an air sensitive solid. The spectral and X-ray data of these complexes revealed that the coordination geometries around the ruthenium center of both complexes corresponded to a distorted trigonal bipyramid with the olefin occupying the equatorial position and the C-C bonding in the olefin moiety in 3 and 10 contained a significant contribution from a ruthenacyclopropane limiting structure. Complexes 3 and 10 showed catalytic activity for the hydroamination of phenylacetylene 11 with aniline 12. Ruthenium complex 3 in the co-presence of NH₄PF₆ or H₃PW₁₂O₄₀ proves to be a superior catalyst system for this hydroamination reaction. In the case of the reaction using H₃PW₁₂O₄₀ as an additive, ketimines (13) was obtained in 99% yield at a ruthenium-catalyst loading of 0.1 mol%. Some aniline derivatives such as 4-methoxy, 4-trifluoromethyl-, and 4-bromoanilines can also be used in this hydroamination reaction.     

Synthesis of trans-[Re(NO)2-(Ph2PCH2CH2PPh2)2][BF4], a formal dinitrosyl complex of rhenium(-I) and its protic denitrosylation. X-Ray structure of trans-[ReF(NO)-(Ph2PCH2CH2PPh2)2][BF4]

Treatment of a THF solution of trans-[ReCl(N₂)(dppe)₂] (dppe = Ph₂PCH₂CH₂PPh₂) with NO, in the presence of Tl[BF₄], forms trans-[Re(NO)₂(dppe)₂][BF₄], a rare formal 20-electron d⁸-rhenium nitrosyl complex which, by reaction with HX (X = BF₄, Cl or HSO₄), gives trans-[ReF(NO)(dppe)₂][BF₄] (2) (the X-ray structure of which is reported) or trans-[ReX(NO)(dppe)₂]X (3, X = Cl or HSO₄), respectively, as well as nitrous oxide.     

Reactivity of [ReOX3(PPh3)2] and [ReOX3(AsPh3)2] towards 2-(2-hydroxyphenyl)-1H-benzimidazole: Synthesis, X-ray studies, spectroscopic characterization and DFT calculations for [ReOX2(hpb)(EPh3)] and [ReO(OMe)(hpb)2]·MeCN

The paper presents a combined experimental and computational study of mono- and disubstituted Re(V) oxocomplexes obtained in the reactions of [ReOX₃(EPh₃)₂] (X = Cl, Br; E = P, As) with 2-(2-hydroxyphenyl)-1H-benzimidazole (Hhpb). From the reactions of [ReOX₃(PPh₃)₂] with Hhpb in molar ratio 1:1 cis and trans stereoisomers of [ReOX₂(hpb)(PPh₃)] were isolated, whereas the [ReOX₃(AsPh₃)₂] oxocompounds react with Hhpb to give only cis-halide isomers. The [ReOX₂(hpb)(EPh₃)] and [ReO(OMe)(hpb)₂]·MeCN complexes have been characterized spectroscopically and structurally (by single-crystal X-ray diffraction). The DFT and TDDFT calculations have been carried out for the trans-[ReOBr₂(hpb)(PPh₃)], cis-[ReOBr₂(hpb)(AsPh₃)] and [ReO(OMe)(hpb)₂], and their UV–Vis spectra have been discussed on this basis.     

Six-membered cyclometallated derivatives of platinum(II) derived from 2-benzylpyridines. Crystal and molecular structure of [Pt(L)(Ph3P)Cl] (HL = 2-(1-methylbenzyl)pyridine)

The reaction of K₂[PtCl₄] with 2-(1-methylbenzyl)pyridine, HL, and 2-benzylpyridine, HL', affords the cyclometallated species [{Pt(L)Cl}₂] (1) and [{Pt(L')Cl}₂] (2), respectively. The chloride bridge in complex 1 can be split by neutral or anionic species to give the monomeric, [Pt(L)(Ph₃P)Cl], as two isomers, trans-P-Pt-C (3) and trans-P-Pt-N, (4), [Pt(L)(py)Cl] (5), [Pt(L)(CO)Cl] (6), [Pt(L)(CNCH₂SO₂C₆H₄CH₃-4)Cl] (7), [Pt(L)(acac)] (Hacac = 2,4-pentanedione) (8), [Pt(L)(dppm)][BF₄] (dppm = bis(diphenyl-phosphino)methane) (9), [Pt(L)(dppe)][BF₄] (dppe = bis(diphenylphosphino)ethane) (10) and [Pt(L)(dipy)][BF₄](dipy = 2,2'-dipyridine) (11). Similarly, compound 2, by reaction with Ph₃P, affords [Pt(L')(Ph₃P)Cl], as two isomers, trans-P-Pt-C (12) and trans-P-Pt-N (13). Reaction of compounds 1 or 4 with AgBF₄ in acetonitrile affords [Pt(L)(CH₃CN)₂IBF₄] (14) or [Pt(L)(Ph₃P)-(CH₃CN)][BF₄] (15). From these, [Pt(L)(Ph₃P)₂][BF₄] (16), [Pt(L)(Ph₃P)(CO)][BF₄] (17) and [Pt(L)(Ph₃P)(py)][BF₄] (18), can be obtained by displacement of the coordinated acetonitrile. The new complexes were characterized by IR, ¹H and ³¹P NMR and FAB-MS spectroscopic techniques. The NMR spectra at room temperature of most of the species derived from HL give evidence for the presence in solution of two diastereomers a and b. The structure of one diastereomer of complex 4 has been solved by single crystal X-ray diffraction, 4b. The platinum atom is in an almost square planar geometry with a P-Pt-N trans arrangement: Pt-N = 2.095(3), Pt-C = 1.998(4), Pt-P = 2.226(1) and Pt-Cl = 2.400(1) Å. The six-membered cyclometallated ring is in a boat conformation, with the CH₃ group in an equatorial position, i.e pointing away from the metal. Attempts to obtain [{Pt(L″)Cl}₂] (HL″ = 2-(dimethylbenzyl)pyridine), afforded an insoluble product heavily contaminated by platinum metal; treatment of this crude material with Ph₃P gave [Pt(L″)(Ph₃P)Cl] (19).     

Vinyliden-Übergangsmetallkomplexe XXVI. Synthese und struktur kationischer Carbonyl-, Alken-, Vinyliden-, Alkinyl- und Alkin-Rhodiumkomplexe mit der Baueinheit trans-[Rh(PPr3)2]

The complex trans-[Rh(CO)(NH₃)(PiPr₃)₂]PF₆ (2) was prepared from [(η³-C₃H₅)Rh(PⁱPr₃)₂] (1), NH₄PF₆ and CO or from 1 and NH₄PF₆ in presence of an excess of methanol. With an excess of CO, the dicarbonyl and tricarbonyl compounds trans-[Rh(CO)₂(PⁱPr₃)₂]PF₆ (3) and [Rh(CO)₃(PⁱPr₃)₂]PF₆ (4) were obtained. Displacement of one CO ligand in 3 by pyridine and acetone led to the formation of trans-[Rh(CO)(py)PⁱPr₃)₂]PF₆ (5a) and trans-[Rh(CO) (O=CMe₂(PⁱPr₃)₂]PF₆ (6), respectively. Treatment of 1 with [pyH]BF₄ and pyridine gave trans-[Rh(py)₂(PⁱPr₃)₂]BF₄ (7); in presence of H₂ the dihydrido complex [RhH₂(py)₂(PⁱPr₃)₂]BF₄ (8) was formed. The reaction of 1 with NH₄PF₆ and ethylene produced trans [Rh(C₂H₄(NH₃(PⁱPr₃)₂]PF₆(9) whereas with methylvinylketone and acetophenone the octahedral hydridorhodium(III) complexes [RhH(η²-CH=CHC(=O)CH₃ (NH₃(PⁱPr₃)₂]PF₆(11) and [RhH(η2-C₆H₄C(=O)CH₃(NH₃(Pⁱpr₃)₂]PF₆ (13) were obtained. The synthesis of the cationic vinylidenerhodium(I) compounds trans-[Rh(=C=CHR)(py)(PⁱPr₃)₂]BF₄ (14–16) and trans-[Rh(=C=CHR)(NH₃)(PⁱPr₃) ₂]PF6 (17–19) was achieved either on treatment of 1 with [pyH]BF₄ or NH₄PF₆ in presence of 1-alkynes or by ethylene displacement from 9 by HCCR. With tert-butylacetylene as substrate, the alkinyl(hydrido)rhodium(III) complex [RhH(CC^tBu)(NH₃)(O=CMe₂)(PⁱPr₃) ₂]PF₆ (20) was isolated which in CH₂Cl₂ solution smoothly reacted to give 19 (R =^tBu). The cationic but-2-yne compound trans-[Rh(MeCCMe)(NH₃)(Pⁱ Pr₃)₂]PF₆ (21) was prepared from 1, NH₄PF₆ and C₂Me₂. The molecular structures of 3 and 14 were determined by X-ray crystallography; in both cases the square-planar coordination around the metal and the trans disposition of the phosphine ligands was confirmed.

Abstract

Der Komplex trans-[Rh(CO)(NH₃)(PⁱPr₃)₂]PF₆ (2) wurde aus [(η³-C₃H₅)Rh(PⁱPr₃)₂] (1), NH₄PF₆ und CO oder aus 1, NH₄PF₆ und Methanol hergestellt. In Gegenwart von überschüssigem CO wurden die Dicarbonyl- und Tricarbonyl-Verbindungen trans-[Rh(CO)₂(PⁱPr₃)₂]PF₆ (3) und [Rh(CO)₃(PⁱPr₃)₂]PF₆ (4) erhalten. Die Verdrängung eines CO-Liganden in 3 durch Pyridin oder Aceton führte zur Bildung von trans-[Rh(CO)(py)(PⁱPr₃)₂]PF₆ (5a) bzw. trans-[Rh(CO)(O=CMe₂)(PⁱPr₃)₂]PF₆ (6). Bei Einwirkung von [pyH]BF₄ und Pyridin auf 1 entstand trans-[Rh(py)₂(PⁱPr₃)₂]BF₄ (7); in Gegenwart von H₂ bildete sich der Dihydrido-Komplex [RhH₂(py)₂(PⁱPr₃) ₂]BF₄ (8). Die Reaktion von 1 mit NH₄PF₆ und Ethen lieferte trans-[Rh(C₂H₄)(NH₃)(PⁱPr₃)₂] PF₆ (9) während mit Methylvinylketon und Acetophenon die oktaedrischen Hydridorhodium(III)-Komplexe [RhH(η²-CH=CHC(=O)CH₃ (NH₃)-(PⁱPr₃)₂]PF₆ (11) und [RhH(η-²-C₆H₄C(=O)CH₃(NH₃)(PⁱPr₃)₂)₂]PF₆ (13) erhalten wurden. Die Synthese der kationischen Vinyli-denrhodium(I)-Verbindungen trans-[Rh(=C=CHR(py)(PⁱPr₃)₂]BF₄ (14–16) und trans-[Rh(=C=CHR)(NH₃)(PⁱPr₃)₂]PF₆ (17–19) gelang durch Einwirkung von [pyH]BF₄ bzw. NH₄PF₆ auf 1 in Gegenwart von 1-Alkinen oder durch Ethen-Verdrängung aus 9 mit HCCR. Mit tert-Butylacetylen als Reaktionspartner wurde der Alkinyl(hydrido)rhodium(III)-Komplex [RhH(CC^tBu)(NH₃(O=CMe₂)(PⁱPr₃)₂]PF₆ (20) isoliert, der in CH₂Cl₂-Lösung sofort zu 19 (R =^tBu) reagiert. Die kationische 2-Butin-Verbindung trans -[Rh(MeCCMe)(NH₃)PⁱPr₃)₂]PF₆ (21) wurde aus 1, NH₄PF₆ und C₂Me₂ hergestellt. Die Strukturen von 3 und 14 wurden kristallographisch bestimmt; in beiden Fa len ließ sich die quadratisch-planare Koordination des Metalls und die trans-Anordnung der Phosphanliganden bestätigen.     

[RhCl(CO)(PPh3)]2. A precursor for the synthesis of cationic rhodium complexes with nitrogen donor ligands

Summary The use of [RhCl(CO)(PPh₃)]₂ as a precursor for the synthesis of complexes of the types [Rh(CO)L₂(PPh₃)]A (A = [ClO₄]^– or [BPh₄]^–; L = pyridine type ligand) and [Rh(CO)(L-L)(PPh₃)]A (A = [ClO₄]^– or [BPh₄]^–; L-L = bidentate nitrogen donor) and the preparation of several complexes of the types [Rh(CO)L(PPh₃){P(p-RC₆H₄)₃}]BPh₄ and [Rh(CO)(phen)(PPh₃){P(p-RC₆H₄)₃}]A (A = [ClO₄]^– or [BPh₄]^–; R = H or Me) is described.Author to whom all correspondence should be directed.     

Synthesis of [TpRu(CO)(PPh3)]2(μ-CHCHCHCHC6H4CHCHCHCH) from Wittig reactions

Treatment of [Ru(CHCHCH₂PPh₃)X(CO)(PPh₃)₂]⁺ (X=Cl, Br) with KTp (Tp=hydridotris(pyrazolyl)borate) and NaBPh₄ produced [TpRu(CHCHCH₂PPh₃)(CO)(PPh₃)]BPh₄. Reaction of RuHCl(CO)(PPh₃)₃ with HCCCH(OEt)₂ produced Ru(CHCHCH(OEt)₂)Cl(CO)(PPh₃)₂, which reacted with KTp to give TpRu(CHCHCHO)(CO)(PPh₃). Treatment of [TpRu(CHCHCH₂PPh₃)(CO)(PPh₃)]BPh₄ with NaN(SiMe₃)₂ and benzaldehyde produced TpRu(CHCHCHCHPh)(CO)(PPh₃). The later complex was also produced when TpRu(CHCHCHO)(CO)(PPh₃) was treated with PhCH₂PPh₃Cl/NaN(SiMe₃)₂. The bimetallic complex [TpRu(CO)(PPh₃)]₂(μ-CHCHCHCHC₆H₄CHCHCHCH) was obtained from the reaction of [TpRu(CHCHCH₂PPh₃)(CO)(PPh₃)]BPh₄ with NaN(SiMe₃)₂ and terephthaldicarboxaldehyde.     

Syntheses and properties of Re(III) complexes derived from hydrotris(1-pyrazolyl)methanes: molecular structure of [ReCl2(HCpz3)(PPh3)][BF4]

The complexes [ReCl₂{N₂C(O)Ph}(Hpz)(PPh₃)₂] (1) (Hpz = pyrazole), [ReCl₂{N₂C(O)Ph}(Hpz)₂(PPh₃)] (2), [ReCl₂(HCpz₃)(PPh₃)][BF₄] (3) and [ReCl₂(3,5-Me₂Hpz)₃(PPh₃)]Cl (4) were obtained by treatment of the chelate [ReCl₂{η²-N,O-N₂C(O)Ph}(PPh₃)₂] (0) with hydrotris(1-pyrazolyl)methane HCpz₃ (1,3), pyrazole Hpz (1,2), hydrotris(3,5-dimethyl-1-pyrazolyl)methane HC(3,5-Me₂pz)₃ (4) or dimethylpyrazole 3,5-Me₂Hpz (4). Rupture of a C(sp³)-N bond in HCpz₃ or HC(3,5-Me₂pz)₃, promoted by the Re centre, has occurred in the formation of 1 or 4, respectively. All compounds have been characterized by elemental analyses, IR and NMR spectroscopy, FAB-MS spectrometry, cyclic voltammetry and, for 1 · CH₂Cl₂ and 3, also by single crystal X-ray analysis. The electrochemical E_L Lever parameter has been estimated, for the first time, for the HCpz₃ and the benzoyldiazenide NNC(O)Ph ligands.     

Synthesis and structural characterisation of the oxo-rhenium(V) complexes with spirophosphorane derived bidentate ligand (PO). Crystal structure of trans-ReOCl2[OCMe2CMe2OP(OCMe2CMe2O)](PPh3)

The reactions of ReO(OEt)Cl₂L₂, L=py, PPh₃ or ReOCl₃(Me₂S)(OPPh₃), with spirohydrophosphorane HP(OCMe₂CMe₂O)₂ – abbreviated here as HPO – in toluene yield ReOCl₂(PO)L complexes, L=py (1), PPh₃ (2) and OPPh₃ (3), respectively. The encountered bidentate phosphite pinacolato (OCMe₂CMe₂O)POCMe₂CMe₂O⁻ ligand (PO⁻) is afforded by means of a spirophosphorane ring-opening reaction. All the pink–violet compounds 1–3 were characterised by NMR, IR and UV–Vis spectroscopies. The structure of trans-ReOCl₂(PO)PPh₃ (2) was determined crystallographically. The rhenium atom adopts distorted octahedral geometry with a trans multiply bonded terminal oxo ligand (Re–O_t=1.698(2) Å) trans to pinacolate oxygen (Re–O=1.880(2) Å). Two phosphorus atoms as well as two chlorides are mutually in a trans arrangement.     

The Staudinger reaction of platinum(II)- and palladium(II)-coordinated 2-(azidomethyl)phenyl isocyanide. X-ray structure of trans-[PtCl{(H)}(PPh3)2][BF4] · CDCl3 · H2O

2-(Azidomethyl)phenyl isocyanide, 2-(CH₂N₃)C₆H₄NC (AziNC), coordinates to some cationic Pt(II) and Pd(II) species to afford isocyanide complexes of the type trans-[MCl(AziNC)(PPh₃)₂][BF₄] (M=Pt, l; Pd, 2). AziNC is coordinated also in some neutral Pt(II) and Pd(II) species such as [MCl₂(AziNC)₂] (M=Pt, 3; Pd, 4) derived from the reactions of 2 equiv. of AziNC with [PtCl₂(COD)] and [PdCl₂(MeCN)₂], respectively. Complexes 1 and 2 react with 1 equiv. of PPh₃ affording the heterocyclic carbene complexes trans-[MCl{(H)}(PPh₃)₂][BF₄] (M=Pt, 5; Pd, 6). Complexes 3 and 4 react with 1 equiv. of PPh₃ displacing the isocyanide with the formation of the complexes cis-[MCl₂(AziNC)(PPh₃)] (M=Pt, 7; Pd, 8). These latter ones react with 2 equiv. of PPh₃ affording as the final products the cationic carbene species trans-[MCl{(H)}(PPh₃)₂][Cl] (M=Pt, 9; Pd, 10). Complex 5 was also characterized by single crystal X-ray diffraction. The carbene complex is square-planar and the angle formed between the platinum square plane and the heterocyclic carbene ligand is 87.9(2)°. The C(1)-N(1) and C(1)-N(2) bond distances in the latter of 1.32(2) and 1.30(2) Å, respectively, are short for a single bond and indicate extensive π-bonding between the nitrogen atoms and the carbene carbon.     

Allyldifluorophosphite-metal chemistry: Ru complexes of F2POC3H5 and the crystal structure of (Ph3P)2(F2POC3H5)Ru(CO)(Cl)H

With several chloro ruthenium phosphine complexes, allyldifluorophosphite, F₂POC₃H₅, displaces triphenylphosphine to form new compounds in which it acts as a phosphorus donor ligand. The new complexes [PPh₃]₂[F₂POC₃H₅]Ru[CO][Cl][H], I, and [(PPh₃)₂(F₂POC₃H₅)₂RuCl₂]_nII, hav characterized by chemical, spectroscopic, and, in the case of I, crystallographic means. This behaviour of F₂POC₃H₅ contrasts to its reactions with several platinum and palladium chloro complexes where it undergoes Arbuzov-type rearrangements.