A new synthesis for thermolabile low-valent palladium complexes by electron transfer reactions from nickel(0) to palladium(II) compounds

The nickel(0) complex [Ni(bpy)(cod)] (bpy: 2,2′-bipyridine, cod: cycloocta-1,5-diene) was used as a mild reducing reagent for the synthesis of the extremely reactive low-valent palladium complexes [Pd₂X₂(cod)₂] (1: X = Cl, 2: X = Br), Pd(cod)₂ (3) and Pd(norbornene)₃ (4). The X-ray analysis of 1 showed that the two [Pd(cod)(Cl)] moieties are only connected by a short Pd(I)-Pd(I) bond (bond length: 2.5379(4) Å) with the chloride ions as monodentate ligands. The X-ray structure of 3 which is also known to be an extremely reactive compound could be determined by X-ray diffraction. As expected, the Pd(0) centre is surrounded by the two cod ligands to form a PdC₄ tetrahedron with typical Pd-C bond lengths. The crystal structure of 3 shows it to be very similar to the closely related complexes M(cod)₂ (M: Ni, Pt). The X-ray structure of 4 displays that the Pd(0) centre is in a trigonal planar environment of the three olefin groups. According to ¹H NMR measurements the complexes have the same structure in solution as found in the solid state.     

Reactions of rhenium and manganese carbonyl complexes with 1,8-bis(diphenylphosphino)naphthalene: Ligand chelation, C-H and C-P bond-cleavage reactions

Reaction of [Re₂(CO)₈(MeCN)₂] with 1,8-bis(diphenylphosphino)naphthalene (dppn) afforded three mono-rhenium complexes fac-[Re(CO)₃(κ¹:η¹-PPh₂C₁₀H₆)(PPh₂H)] (1), fac-[Re(CO)₃{κ¹:κ¹:η¹-(O)PPh₂C₁₀H₆(O)PPh(C₆H₄)}] (2) and fac-[ReCl(CO)₃(κ²-PPh₂C₁₀H₆PPh₂)] (3). Compounds 1-3 are formed by Re-Re bond cleavage and P-C and C-H bond activation of the dppn ligand. Each of these three complexes have three CO groups arranged in facial fashion. Compound 1 contains a chelating cyclometalated diphenylnaphthylphosphine ligand and a terminally coordinated PPh₂H ligand. Compound 2 consists of an orthometalated dppn-dioxide ligand coordinated in a κ¹:κ¹:η¹-fashion via both the oxygen atoms and ortho-carbon atom of one of the phenyl rings. Compound 3 consists of an unchanged chelating dppn ligand and a terminal Cl ligand. Treatment of [Mn₂(CO)₈(MeCN)₂] with a slight excess of dppn in refluxing toluene at 72 °C, gave the previously reported [Mn₂(CO)₈(μ-PPh₂)₂] (4), formed by cleavage of C-P bonds, and the new compound fac-[MnCl(CO)₃(κ²-PPh₂C₁₀H₆PPh₂)] (5), which has an unaltered chelating dppn and a terminal Cl ligand. In sharp contrast, reaction of [Mn₂(CO)₈(MeCN)₂] with slight excess of dppn at room temperature yielded the dimanganese [Mn₂(CO)₉{κ¹-PPh₂(C₁₀H₇)}] (6) in which the diphenylnaphthylphosphine ligand, formed by facile cleavage of one of the P-C bonds, is axially coordinated to one Mn atom. Compound 6 was also obtained from the reaction of [Mn₂(CO)₉(MeCN)] with dppn at room temperature. The XRD structures of complexes 1-3, 5, 6 are reported.     

Iron(III) mixed-ligand complexes: Synthesis,characterization and crystal structure determination of iron(III) hetero-ligand complexes containing 1,10-phenanthroline, 2,2′-bipyridine,chloride and dimethyl sulfoxide, [Fe(phen)Cl3(DMSO)] and [Fe(bipy)Cl3(DMSO)]

Treatment of [Fe(bipy)Cl₄][bipy · H] (1) and [Fe(phen)Cl₄][phen · H] (3) (where bipy is 2,2′-bipyridine and phen is 1,10-phenanthroline) with dimethyl sulfoxide in methanolic solution produced [Fe(bipy)Cl₃(DMSO)] (2) and [Fe(phen)Cl₃(DMSO)] (4) (where DMSO is dimethyl sulfoxide), respectively. The resulting complexes were characterized by elemental analysis, IR, UV–Vis and ¹H NMR spectroscopies and by the X-ray diffraction method. These complexes are high spin with a spin multiplicity of 6.     

1,3-Diarylimidazolidin-2-ylidene (NHC) complexes of Pd(II): Electronic effects on cross-coupling reactions and thermal decompositions

The synthesis of 1,3-diarylimidazolidin-2-ylidene (NHC) precursor, 1,3-bis(2,4,6-trimethylphenyl)imidazolinium chloride, (3b) has been extended to the electronically and sterically modified NHC precursors 3a (X = H), 3c (X = Br) and 3e (X = Cl) in order to investigate the electronic effect of a p-substituent (X) on cross-coupling catalysts. Complexes of the type PdCl₂(NHC)₂ (5), PdCl₂(NHC)(PPh₃) (6) and [RhCl(NHC)(cod)] (7) were prepared from 3 or 4d (1,3-bis(2,4-dimethylphenyl)-2-trichloromethylimidazolidin). Initial decomposition temperatures of the complexes 5 and 6 were determined by TGA. In situ formed complexes from Pd(OAc)₂ and 3 as well as the preformed complexes 5 and 6 have been tested as catalysts in coupling of phenylboronic acid with 4-haloacetophenones. The electron donating ability of NHCs derived from 3 was assessed by measuring C-O frequencies in the respective [RhCl(NHC)(CO)₂] complex 8 which was prepared by replacement of cod ligand of 7 with CO. An interesting correlation between the electron-donating nature of the aryl substituent and catalytic activity and also initial decomposition temperature of the complexes 5 and 6 was observed.     

Tricarbonylrhenium(I) and manganese(I) complexes of 2-(pyrazolyl)-4-toluidine

A series of tricarbonyl rhenium(I) and manganese(I) complexes of the electroactive 2-(pyrazolyl)-4-toluidine ligand, H(pzAn^Me), has been prepared and characterized including by single crystal X-ray diffraction studies. The reactions between H(pzAn^Me) and M(CO)₅Br afford fac-MBr(CO)₃[H(pzAn^Me)] (M = Mn, 1a; Re, 1b) complexes. The ionic species {fac-M(CH₃CN)(CO)₃[H(pzAn^Me)]}(PF₆) (M = Mn, 2a; Re, 2b) were prepared by metathesis of 1a or 1b with TlPF₆ in acetonitrile. Complexes 1a and 1b partly ionize to {M(CH₃CN)(CO)₃[H(pzAn^Me)]⁺}(Br⁻) in CH₃CN but retain their integrity in less donating solvents such as acetone or CH₂Cl₂. Each of the four metal complexes reacts with (NEt₄)(OH) in CH₃CN to give poorly-soluble crystalline [fac-M(CO)₃(μ-pzAn^Me)]₂ (M = Mn, 3a; Re, 3b). The solid state structures of 3a and 3b are of centrosymmetric dimeric species with bridging amido nitrogens and with pyrazolyls disposed trans- to the central planar M₂N₂ metallacycle. In stark contrast to the diphenylboryl derivatives, Ph₂B(pzAn^Me), none of the tricarbonyl group 7 metal complexes are luminescent.     

Synthesis, structure and catalytic activity of the first iridium(I) siloxide versus chloride complexes with 1,3-mesitylimidazolin-2-ylidene ligand

The first iridium(I) complex containing siloxyl and N-heterocyclic carbene ligand such as [Ir(cod)(IMes)(OSiMe₃)] (1) and [Ir(CO)₂(IMes)(OSiMe₃)] (3) have been synthesized and their structures solved by spectroscopy and X-ray methods as well as catalytic properties in selected hydrogenation reactions have been presented in comparison to their chloride analogues, i.e. [Ir(Cl)(cod)(IMes)] (2) and [Ir(Cl)(CO)₂(IMes)] (4). The attempts at synthesis of iridium(I) complex with tert-butoxyl ligand has failed as leading instead to the iridium hydroxide complex [Ir(cod)(OH)(IMes)] (5) whose X-ray structure has also been solved. All complexes (1)-(5) show square planar geometry typical of the four-coordinated iridium complexes. Catalytic activity of complexes 1 and 2 was tested in transfer hydrogenation of acetophenone and hydrogenation of olefins.     

Styrene polymerization using nickel(II) complexes as catalysts

Styrene polymerization is investigated with neutral and cationic Ni(II) complexes, i.e. Ni(bipy)Me₂, 1, Ni(bipy)Br₂, 2, Ni(phen)Br₂, 3, or Ni(Me₂phen)Br₂, 4, Ni(acac)₂, 5, (bipy = 2,2′-bipyridine, phen = phenanthroline, Me₂phen = 2,9-dimethyl-1,10-phenanthroline, acac = acetylacetonate), activated by [NHMe₂Ph][B(C₆F₅)₄] or B(C₆F₅)₃ as cocatalysts, in the presence of AlMe₃. The influence on the polystyrene features and the reaction kinetics of the nickel complex and boron activator, the Al/Ni or B/Ni molar ratios as well as the monomer concentration are studied. Catalytic systems derived from 2, 3 or 5 and [NHMe₂Ph][B(C₆F₅)₄] at a Ni:B:Al ratio of 1:1:5 are the most efficient at room temperature.     

Synthesis and diphosphine ligand fluxionality in Os3(CO)10(bmi): Kinetic evidence for nondissociative diphosphine isomerization and X-ray crystal structure of 1,1-Os3(CO)10(bmi)

The triosmium cluster 1,2-Os₃(CO)₁₀(MeCN)₂ reacts rapidly with the diphosphine ligand 2,3-bis(diphenylphosphino)-N-p-tolylmaleimide (bmi) at room temperature to give bmi-bridged cluster 1,2-Os₃(CO)₁₀(bmi) (2b) as the major product, along with the chelating isomer 1,1-Os₃(CO)₁₀(bmi) (2c) and the hydride-bridged cluster HOs₃(CO)₉[μ-(PPh₂)CC{PPh(C₆H₄)}C(O)N(tolyl-p)C(O)] (3) as minor by-products. All three cluster compounds have been isolated and fully characterized in solution by IR and NMR spectroscopies (¹H and ³¹P), and X-ray crystallography in the case of 2c. Cluster 2b is unstable and readily isomerizes to 2c in quantitative yield on mild heating. The kinetics for the conversion of 2b → 2c have been measured over the temperature range of 318-348 K in toluene solution, and based on the observed activation parameters a nondissociative isomerization process that proceeds via a transient μ₂-bridged phosphine moiety is presented. Near-UV photolysis of cluster 2c at room temperature affords HOs₃(CO)₉[μ-(PPh₂)CC{PPh(C₆H₄)}C(O)N(tolyl-p)C(O)] (3) with a quantum yield of 0.017. The reactivity of clusters 2b, 2c, and 3 is discussed with respect to related diphosphine-substituted Os₃(CO)₁₀(P-P) clusters prepared by our groups.     

Nucleophilic substitution reactions at the Si-Cl bonds of the dichloro(methyl)silyl ligand in five- and six-coordinate complexes of ruthenium(II) and osmium(II)

Treatment of either RuHCl(CO)(PPh₃)₃ or MPhCl(CO)(PPh₃)₂ with HSiMeCl₂ produces the five-coordinate dichloro(methyl)silyl complexes, M(SiMeCl₂)Cl(CO)(PPh₃)₂ (1a, M = Ru; 1b, M = Os). 1a and 1b react readily with hydroxide ions and with ethanol to give M(SiMe[OH]₂)Cl(CO)(PPh₃)₂ (2a, M = Ru; 2b, M = Os) and M(SiMe[OEt]₂)Cl(CO)(PPh₃)₂ (3a, M = Ru; 3b, M = Os), respectively. 3b adds CO to form the six-coordinate complex, Os(SiMe[OEt]₂)Cl(CO)₂(PPh₃)₂ (4b) and crystal structure determinations of 3b and 4b reveal very different Os-Si distances in the five-coordinate complex (2.3196(11) Å) and in the six-coordinate complex (2.4901(8) Å). Reaction between 1a and 1b and 8-aminoquinoline results in displacement of a triphenylphosphine ligand and formation of the six-coordinate chelate complexes M(SiMeCl₂)Cl(CO)(PPh₃)(κ²(N,N)-NC₉H₆NH₂-8) (5a, M = Ru; 5b, M = Os), respectively. Crystal structure determination of 5a reveals that the amino function of the chelating 8-aminoquinoline ligand is located adjacent to the reactive Si-Cl bonds of the dichloro(methyl)silyl ligand but no reaction between these functions is observed. However, 5a and 5b react readily with ethanol to give ultimately M(SiMe[OEt]₂)Cl(CO)(PPh₃)(κ²(N,N-NC₉H₆NH₂-8) (6a, M = Ru; 6b, M = Os). In the case of ruthenium only, the intermediate ethanolysis product Ru(SiMeCl[OEt])Cl(CO)(PPh₃)(κ²(N,N-NC₉H₆NH₂-8) (6c) was also isolated. The crystal structure of 6c was determined. Reaction between 1b and excess 2-aminopyridine results in condensation between the Si-Cl bonds and the N-H bonds with formation of a novel tridentate “NSiN” ligand in the complex Os(κ³(Si,N,N)-SiMe[NH(2-C₅H₄N)]₂)Cl(CO)(PPh₃) (7b). Crystal structure determination of 7b shows that the “NSiN” ligand coordinates to osmium with a “facial” arrangement and with chloride trans to the silyl ligand.     

Reactivity of [CpCr(CO)3]2 towards thione (CS) moieties in some sulfur-containing substrates

The reaction of [CpCr(CO)₃]₂ (Cp = η⁵-C₅H₅) (1) with 1 mol equivalent of 2,5-dimercapto-1,3,4-thiadiazole (DMcTH₂) at ambient temperature led to the isolation of a reddish-brown crystalline solid of CpCr(CO)₃(η¹-DMcTH) (5) and a green solid of CpCr(CO)₃H (2) in yields of ca. 28% and 30%, respectively, along with some [CpCr(CO)₂]₂ (3) and [CpCr(CO)₂]₂S (4). The reaction of 1 with 1 mol equivalent of vinylene trithiocarbonate (SCS(CH)₂S) (VTTC) at 90 °C led to the isolation of a red crystalline solid of CpCr(CO)₂(η²-SCHSC₂H₂) (6) in ca. 15% yield while the reaction of 1 with isopropylxanthic disulfide ((CH₃)₂CHOCS₂)₂ resulted in the formation of CpCr(CO)₂(η²-S₂COCH(CH₃)₂) (8) in ca. 80% yield. The complexes 5, 6 and 8 have been determined by single crystal X-ray diffraction analysis.     

C-H Activation of 3,3-diphenylcyclopropene in the reaction with Os(CO)2(PPh3)3: 3,3-diphenylcyclopropenyl, 2,2-diphenylcyclopropyl, and 3-phenylindenyl complexes of osmium(II)

Reaction between Os(CO)₂(PPh₃)₃ and 3,3-diphenylcyclopropene under quartz-halogen irradiation leads to C(sp²)-H bond activation and the formation of the 3,3-diphenylcyclopropenyl complex, OsH[C₃H(Ph-2)₂](CO)₂(PPh₃)₂ (1). When complex 1 is heated there is ring-opening of the cyclopropene ring and rearrangement to the 3-phenylindenyl complex, OsH[C₉H₆(Ph-3)](CO)₂(PPh₃)₂ (2). Compound 1 reacts with HCl forming the 2,2-diphenylcyclopropyl complex, OsCl[C₃H₃(Ph-2)₂](CO)₂(PPh₃)₂ (3). Reaction of either 1 or 3 with excess HCl leads to reversible formation of the hydroxycarbene complex, OsCl₂[C(OH)C₃H₃(Ph-2)₂](CO)(PPh₃)₂ (4), through protonation of the acyl group formed by a migratory insertion reaction involving a carbonyl ligand and the σ-bound 2,2-diphenylcyclopropanyl ligand. An X-ray crystal structure determination of 2 is reported.     

Osmium-carbonyl complexes of naphthylazoimidazoles. Single crystal X-ray structure of [Os(H)(CO)(PPh3)2(α-NaiEt)](PF6) {α-NaiEt = 1-ethyl-2-(naphthyl-α-azo)imidazole}

1-Alkyl-2-(naphthyl-α/β-azo)imidazole (α-NaiR 1; β-NaiR, 2) react with [Os(H)(Cl)(CO)(PPh₃)₃] in THF and synthesise [Os(H)(CO)(PPh₃)₂(α/β-NaiR)](PF₆) (3, 4). The X-ray structure of [Os(H)(CO)(PPh₃)₂(α-NaiEt)](PF₆) (3c) shows a distorted octahedral geometry. Other spectroscopic studies (IR, UV–Vis, NMR) support the stereochemistry of the complexes. Addition of Cl₂ in MeCN to 3 or 4 gives [Os(Cl)(CO)(α/β-NaiR)(PPh₃)₂](PF₆) (5, 6), which were characterized by spectroscopic studies. The redox properties of the complexes show Os(III)/Os(II), Os(IV)/Os(III) and azo reductions.     

Evaluation of two chelators for labelling a PNA monomer with the fac-[Tc(CO)3] moiety

A PNA monomer containing thymine as nucleobase (1) was synthesized, characterized and coupled to the pyrazolyl containing ligand 3,5-Me₂pz(CH₂)₂N((CH₂)₃COOH)(CH₂)₂NHBoc (2) and to a modified cysteine S-(carboxymethyl-pentafluorphenyl)-N-[(trifluor)carbonyl]-l-cysteine methyl ester (3) yielding the bifunctional chelators 6 and 7, respectively. Reactions of 6 and 7 with the Re(I) tricarbonyl starting material [Re(CO)₃(H₂O)₃]Br afforded the complexes fac-[Re(CO)₃(κ³-6)]⁺ (8) and fac-[Re(CO)₃(κ³-7)] (9), respectively. The identity of 8 and 9 has been established based on IR spectroscopy, elemental analysis, ESI-MS spectrometry and HPLC. The multinuclear NMR spectroscopy (¹H, ¹³C, g-COSY, g-HSQC) has also been very informative in the case of complex 8, showing the presence of rotamers in solution. For 9 the NMR spectrum was too complex due to the presence of rotamers and diastereoisomers. The radioactive congeners of complexes 8 and 9, fac-[^99mTc(CO)₃(κ³-6)]⁺ (8a) and fac-[^99mTc(CO)³(κ³-7)] (9a), have been prepared by reacting the precursor fac-[^99mTc(CO)₃(H₂O)₃]⁺ with the corresponding ligands being their identity established by comparing their HPLC chromatograms with the HPLC of the rhenium surrogates.     

Ligand substitution in HC(O)CCo3(CO)9 with 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd): Diphosphine ligand fluxionality, decarbonylation of the formyl moiety and competitive P-Ph bond cleavage reactivity

The reaction of the formyl-capped cluster HC(O)CCo₃(CO)₉ (1) with the diphosphine ligand 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd) in the presence of added Me₃NO leads to the production of the disubstituted cluster HC(O)CCo₃(CO)₇(bpcd) (2). Thermolysis of 2 in toluene at 60 °C gives the methylidyne-capped cluster HCCo₃(CO)₇(bpcd) (4) and the phosphido-bridged cluster Co₃(CO)₇[μ₂,η²,η¹-P(Ph)CC(PPh₂)C(O)CH₂C(O)] (5). Cluster 4 has been independently prepared from HCCo₃(CO)₉ and bpcd and shown to serve as the precursor to 5. The new clusters 2, 4, and 5 have been isolated and characterized in solution by IR and NMR (¹H and ³¹P) spectroscopies and their solid-state structures have been established by X-ray diffraction analyses. Both clusters 2 and 4 contain 48e- and exhibit triangular Co₃ cores with a chelating and bridging bpcd ligand in the solid state, respectively. The structure of 5 provides unequivocal support for the loss of the methylidyne capping ligand and P-Ph bond cleavage attendant in the activation of 4 and confirms the presence of the face capping seven-electron μ₂,η²,η¹-P(Ph)CC(PPh₂)C(O)CH₂C(O) ligand in the final product. The fluxionality displayed by the bpcd ligand in clusters 2 and 4 and the decarbonylation behavior of the formyl moiety in the former cluster are discussed relative to related alkylidyne-capped Co₃ derivatives.     

The use of 3,3-bis(2-imidazolyl) propionic acid (bip-OH) as a new chelating ligand for Re(CO)3 and Ru complexes: Formation of organometallic PNA oligomers with (bip)Re(CO)3 and their interaction with complementary DNA

We report the use of 3,3-bis(2-imidazolyl) propionic acid (bip-OH, 1) as a new chelating bis(imidazole) ligand. The synthesis and full characterization of complexes Re(bip-O)(CO)₃2 and [Ru(bpy)₂(bip-OH)]²⁺3 is reported. Both complexes show interesting spectroscopic properties, namely IR for compound 2 and ¹H NMR for 3, respectively. The free carboxylic acid functionality of 1 may be used for the coupling to biomolecules. We have prepared two peptide nucleic acid (PNA) decamers to which the rhenium complex 2 is coupled. All reactions were carried out by solid phase synthesis methods. The Re-PNA oligomer conjugates Re(CO)₃(bip- tgt cta gca a -NH₂) 4 and Re(CO)₃(bip- agg agc aac t-Lys-NH₂) 5 were obtained in good yield and high purity after HPLC purification and identified by their mass spectra. The interaction of 5 with complementary DNA yields a melting temperature of (53.9 ± 1) °C. This is the first DNA melting temperature reported for an organometallic metal-PNA conjugate.     

Ruthenium piano-stool complexes containing mono- or bidentate pyrrolidinylalkylphosphines and their reactions with small molecules

Ruthenium piano-stool complexes incorporating the new bidentate aminoalkylphosphine ligand 1,2-bis(dipyrrolidin-1-ylphosphino)ethane (dpyrpe, I) or its monodentate counterpart bis(pyrrolidin-1-yl)methylphosphine (pyr₂PMe, II) have been prepared, [(C₅R₅)RuCl(PP)] (R = Me and PP = dpyrpe, 1; R = Me and PP = (pyr₂PMe)₂, 2; R = H and PP = dpyrpe, 3). Complexes 2 and 3 have been characterized by X-ray crystallography. Complexes 1 and 2 react with NaBAr₄^f in the presence of ligand L to yield [Cp^∗Ru(L)(dpyrpe-κ²P)][BAr^f₄] (L = MeCN, 4a; CO, 4b; N₂, 4c) and [Cp^∗Ru(L)(pyr₂PMe)₂][BAr₄^f] (L = MeCN, 5a; CO, 5b; N₂, 5c). Complex 4a was crystallographically characterized. The CO complexes 4b and 5b were examined using IR spectroscopy in an attempt to establish the electron-donating capabilities of I and II. Complex 1 oxidatively adds H₂ in the presence of NaBAr₄^f to yield the Ru(IV) dihydride [Cp^∗RuH₂(dpyrpe-κ²P)][BAr₄^f], 7.     

Cyclopentadienyl tungsten complexes with thiocarboxylate and thiosulfonate ligands: Structures of CpW(CO)3SCOPh and CpW(CO)3SSO2-4-C6H4Cl

Treatment of the hydrosulfido tungsten complex CpW(CO)₃SH with acid chlorides (RCOCl) or sulfonyl chlorides (RSO₂Cl) affords CpW(CO)₃SCOR (1) [R = Me (a), CH₂Cl (b), Ph (c), 4-C₆H₄NO₂ (d)] and CpW(CO)₃SSO₂R (2) [R = Me (a), Ph (b), 4-C₆H₄Cl (c), 4-C₆H₄NO₂ (d)], respectively. The novel complexes, 1 and 2, were fully characterized by elemental analyses, IR and ¹H NMR spectroscopy. The solid state structures of CpW(CO)₃SCOPh (1c) and CpW(CO)₃SSO₂-4-C₆H₄Cl (2c) were determined by an X-ray crystal structure analysis.     

Nickel(II)-triphenylphosphine complexes of ONS and ONN chelating 2-hydroxyacetophenone thiosemicarbazones

The complexes [Ni(L¹)(PPh₃)] (1) and [Ni(L²)(PPh₃)]·HCl (2) were synthesized by the reaction of [Ni(PPh₃)Cl₂] and dibasic 2-hydroxyacetophenone-S-R-4-R¹-thiosemicarbazones (R/R¹: H/CH₃, L¹H₂; CH₃/H, L²H₂). The ligands and the complexes were characterized using elemental analysis, IR and ¹H NMR spectra. In both complexes, the thiosemicarbazone ligands coordinate to nickel(II) by giving two protons. Complex 1 is formed through the phenolate oxygen, azomethine nitrogen and sulfur atoms of L¹ and the P atom of a triphenylphosphine ligand. In complex 2, L² is functional through an ONN donor set, containing a thioamide nitrogen instead of a sulfur atom. X-ray analysis indicated distorted square planar structures for the complexes, and the nickel atoms lie slightly above the planes structured by the donor atoms. In the crystal forms of 1 and 2, some phenyl ring protons of the phosphine ligand give intramolecular hydrogen bonds with the donor atoms of the thiosemicarbazone moiety, namely the phenolate oxygen (in complexes 1 and 2) and N⁴ nitrogen (in complex 2).     

Reactivity of [Re2(CO)8(MeCN)2] with thiazoles: Hydrido bridged dirhenium compounds bearing thiazoles in different coordination modes

Reactions of the labile compound [Re₂(CO)₈(MeCN)₂] with thiazole and 4-methylthiazole in refluxing benzene afforded the new compounds [Re₂(CO)₇{μ-2,3-η²-C₃H(R)NS}{η¹-NC₃H₂(4-R)S}(μ-H)] (1, R = H; 2, R = CH₃), [Re₂(CO)₆{μ-2,3-η²-C₃H(R)NS}{η¹-NC₃H₂(4-R)S}₂(μ-H)] (3, R = H; 4, R = CH₃) and fac-[Re(CO)₃(Cl){η¹-NC₃H₂(4-R)S}₂] (5, R = H; 6, R = CH₃). Compounds 1 and 2 contain two rhenium atoms, one bridging thiazolide ligand, coordinated through the C(2) and N atoms and a η¹-thiazole ligand coordinated through the nitrogen atom to the same Re as the thiazolide nitrogen. Compounds 3 and 4 contain a Re₂(CO)₆ group with one bridging thiazolide ligand coordinated through the C(2) and N atoms and two N-coordinated η¹-thiazole ligands, each coordinated to one Re atom. A hydride ligand, formed by oxidative-addition of C(2)-H bond of the ligand, bridges Re-Re bond opposite the thiazolide ligand in compounds 1-4. Compound 5 contains a single rhenium atom with three carbonyl ligands, two N-coordinated η¹-thiazole ligands and a terminal Cl ligand. Treatment of both 1 and 2 with 5 equiv. of thiazole and 4-methylthiazole in the presence of Me₃NO in refluxing benzene afforded 3 and 4, respectively. Further activation of the coordinated η¹-thiazole ligands in 1-4 is, however, unsuccessful and results only nonspecific decomposition. The single-crystal XRD structures of 1-5 are reported.     

Mononuclear ruthenium(II) complexes bearing the (S,S)-Pr-pybox ligand

The complexes trans-[RuCl₂(L){(S,S)-ⁱPr-pybox}] ((S,S)-ⁱPr-pybox = 2,6-bis[4′-(S)-isopropyloxazolin-2′-yl]pyridine, L = PMe₃ (1), P(OMe)₃ (2), PPh₂(CH₂CHCH₂) (3), CNBn (5), CNCy (6) and MeCN (7)) have been synthesized by substitution of ethylene on the precursor trans-[RuCl₂(η²-C₂H₄){(S,S)-ⁱPr-pybox}]. This complex also reacts with cyclooctadiene (cod) or norbornadiene (nbd) and NaPF₆, in refluxing methanol, giving the coordination compounds [RuCl(η⁴-cod){(S,S)-ⁱPr-pybox}][PF₆] (8) and [RuCl(η⁴-nbd){(S,S)-ⁱPr-pybox}][PF₆] (9). The structures of complexes [RuCl(CO)(PPh₃)(H-pybox)][BF₄] (H-pybox = 2,6-bis(dihydrooxazolin-2′-yl)pyridine) (4), 6 and 8, have been resolved by X-ray diffraction methods. The catalytic activity of the new complexes in transfer hydrogenation of acetophenone has also been examined.